- Add silent audio when the output contains an audio track but the
current MediaItem doesn't have any audio.
- Add an audio track when generateSilentAudio is set to true.
PiperOrigin-RevId: 511005887
Previously, this was limited to API 29. Expand this to all API versions.
Also, update the test to:
(1) skip based on SDR format input instead of HDR format input
(2) Check the exception message in order to disambiguate between the decoder tone
mapping error, and general video format support error.
PiperOrigin-RevId: 511002218
Unstuck the muxer if the next timestamp in the track with the minimum
timestamp is larger than this minimum timestamp plus
MAX_TRACK_WRITE_AHEAD_US.
PiperOrigin-RevId: 510977088
When rendering frames at a rate higher than the screen refresh rate,
e.g. playing at 8x, the player is releasing multiple frames at the same
release time (nanos) which are then dropped by the platform. The output
buffers are available later and as a result MediaCodec cannot keep up
decoding fast enough.
This change skips releasing multiple video frames on the same vsync
period and proactivelly drops the frame. The frame is counted as skipped
rather than dropped to differentiate with frames dropped due to slow
decoding.
PiperOrigin-RevId: 510964976
This call may cause performance overhead in some situations,
for example if the AudioTrack needs to query an offload DSP
for the current position. We don't need to check this multiple
times per doSomeWork iteration as the value is unlikely to
change in any meaningful way.
PiperOrigin-RevId: 510957116
Before, if the upstream AssetLoader provides HDR to the VideoSamplePipeline when
HDR_MODE_EXPERIMENTAL_FORCE_INTERPRET_HDR_AS_SDR is requested, the
VideoSamplePipeline would attempt to tell the AssetLoader to output SDR, which
could be accomplished via MediaCodec tone-mapping in the AssetLoader.
However, this makes an assumption of the AssetLoader implementation, and
AssetLoaders may not all implement support for decoder tone-mapping. Remove javadoc
attempting to explain how AssetLoaders (ex. custom ones) could behave.
PiperOrigin-RevId: 510956820
This method uses sampleRate, channelCount and pcmEncoding, so passing
AudioFormat is easier.
This will lead into a future change that builds the
encoderInputAudioFormat from encoder.getConfigurationFormat()
PiperOrigin-RevId: 510956177
Rename:
* MatrixShaderProgram to DefaultShaderProgram, and
* FinalMatrixShaderProgramWrapper to FinalShaderProgramWrapper.
PiperOrigin-RevId: 510498547
Rename ScaleToFitTransformation to ScaleAndRotateTransformation.
This better represents the operations that can be accomplished using this
effect. The name was originally named ScaleToFit* because it's not obvious how
to scale to fit using OpenGL, and this effect handled the scaling to fit in a way that no other MatrixTransformations did.
However, it's hard to discover how to rotate when skimming names of effects, so
it's probably more useful to convey that this effect rotates, than that it
scales to fit.
PiperOrigin-RevId: 510480078
Format.toString unfortunately doesn't log colorInfo, and as Format holds a very
large set of values, it's unclear that it should. ColorInfo is useful for codec
exceptions though, so log this in ExportException.createForCodec.
PiperOrigin-RevId: 510475520
Otherwise, a lack of HDR decoding support will result in the tests checking output files for HDR output, like HdrEditingTest.transform_noRequestedTranscode_hdr10File_transformsOrThrows, failing.
PiperOrigin-RevId: 510213020
This allows us to fix usage of HDR_MODE_EXPERIMENTAL_FORCE_INTERPRET_HDR_AS_SDR.
Before, this was checked in the VideoSamplePipeline, which no longer decides on the decoder configuration input format.
PiperOrigin-RevId: 510142097
Some of the test methods in `TransformationTest` don't check
capabilities. Add a check just scoped to decoding (not checking
encoding, but the default encoder factory may fall back).
PiperOrigin-RevId: 510088562
Previously, any constructors instrumented by Robolectric were made public. This
caused two types of issues:
1) If Android classes had non-public constructors which were made public and
added to the Android API, Robolectric allowed tests to incorrectly use the
constructors on older SDK levels (where they were non-public). This most
commonly occurs for AccessibiltyEvent and AccessibilityNodeInfo.
2) When reflection was used to instantiate classes that were instrumented by
Robolectric, all constructors were accessible, which did not match what
happened when running on an Android test.
Update the instrumentation in Robolectric to prevent making all public
constructors.
PiperOrigin-RevId: 510049123
Now that the GLEffectFrameProcessor handles external (video) and internal (image) input, components used only for external input needs should be moved to the ExternalTextureManager for code clarity
PiperOrigin-RevId: 509787494
* Moved the logic to SamplePipeline.
* Pass the requested values via Format.
* Moved exception throwing inside the methods.
* Build up the mimeTypesToCheck as a set - removing possible duplicate
checks.
* Simplified logic that calls the findSupportedMimeType method.
* Improved javadoc.
PiperOrigin-RevId: 509594062
It can be confusing how to use RgbMatrix for app devs not comfortable with image
manipulation, so add a helper class that simply translates rgb values the same
constant brightness value, to update the brightness values.
PiperOrigin-RevId: 509287229
In parsing Describe RTSP response messages, IllegalArgumentExceptions are thrown for invalid parameters and values. These exceptions were not caught and crashed the Playback thread. Now these exceptions will be caught and their errors forwarded to the proper error handling listeners.
#minor-release
Issue: google/ExoPlayer#10971
PiperOrigin-RevId: 509207881
It may be confusing for 3P apps, for us to have separate error codes for (1) if
encoding HDR is not supported at all by the device, and (2) if encoding the
format, which happens to be HDR, is not supported by the device. Instead, we can
communicate this in the error message.
PiperOrigin-RevId: 509188666
Tests in `SilenceSkippingAudioProcessorTest` used half as many short integers as needed for channel values when generating alternating silence/noise input. Fix this by passing left and right channel input.
PiperOrigin-RevId: 509188074
GLEffectsFrameProcessor, MatrixShaderProgram and FinalMatrixShaderProgramWrapper are currently setup to handle the input frames coming from an external input (i.e. a video decoder). Image input is loaded into Bitmap objects at the start of the pipeline, so they are not produced externally. The changes provide a way for the frame processing pipeline to handle this "internal" (i.e. non-external) input.
PiperOrigin-RevId: 508645244
The AsynchronousMediaCodecAdapter's queuing thread stores any exceptions
raised by MediaCodec and re-throws them on the next call to
queueInputBuffer()/queueSecureInputBuffer(). However, if MediaCodec
raises and error while queueing, it goes into a failed state and does
not announce available input buffers. If there is no input available
input buffer, the MediaCodecRenderer will never call
queueInputBuffer()/queueSecureInputBuffer(), hence playback is stalled.
This change surfaces the queueing error through the adapter's dequeueing
methods.
PiperOrigin-RevId: 508637346
`TrackSelectorResult.rendererConfigurations` can contain null elements:
> A null entry indicates the corresponding renderer should be disabled.
This wasn't caught by the nullness checker because `ExoPlayerImpl` is
currently excluded from analysis.
#minor-release
Issue: google/ExoPlayer#10977
PiperOrigin-RevId: 508619169
- For single-asset, the behavior stays the same. Transcode if and only
if it's necessary,
- For constrained multi-asset, always transcode, except if the setter to
transmux is set. This is to avoid failing if a MediaItem that doesn't
require transcoding is followed by a MediaItem that does require
transcoding.
PiperOrigin-RevId: 508097798
Previously, Robolectric's instrumentation updated all constructors to be
public. This caused two main types of problems:
1) When non-public constructors were made public and added to the Android API,
Robolectric allowed tests to incorrectly use the constructors on older SDK
levels (where they were non-public). This most commonly occurs for
AccessibiltyEvent and AccessibilityNodeInfo.
2) When reflection was used to instantiate classes that were instrumented by
Robolectric, all constructors were accessible.
Fix issues across Google3 Robolectric tests that were affected by this issue.
A forthcoming change will fix the instrumentation in Robolectric to prevent
this type of issue from occurring.
Tested:
TAP --sample ran all affected tests and none failed
http://test/OCL:507861075:BASE:507805409:1675803313108:f2128fa4
PiperOrigin-RevId: 508087822
If a renderer error happens while processing readahead data for the
next item in the playlist, we currently throw the error immediately
and only set the item id in the error details. This makes it harder
to associate the error to the right item. For example, the user
facing UI is likely not updated to show the failing item when the
error is reported.
This can be improved slighly by force setting the position to the
failing item. The playback still fails immediately, but this can't
be avoided because the renderer itself went into an error state.
PiperOrigin-RevId: 507808635
The AudioTrackPositionTracker needs to correct positions by
the speed set on the AudioTrack itself whenever it makes
estimations based on real-time (=the real-time playout
duration is not equal to the media duration played).
This happens for the main playback path already, but not for
the mode in which the position is estimated from the playback
head position and also not in the phase after the track has
been stopped. Both cases are not very noticeable during
normal playback, but become relevant when playing in offload
mode.
PiperOrigin-RevId: 507736408
It doesn't actually make sense for them to be placed in the Transformer, because the error's root causes are actually only in codecs. Also, a few codec errors were
repeated, so deduplicate these instances
PiperOrigin-RevId: 506937695
Based on [this conversation thread](https://chat.google.com/room/AAAA--f88ao/76Rem_cRCK8), I've opted to update the existing FrameProcessor.create() rather than deprecate it, as it is unlikely to be in use by apps outside google3.
PiperOrigin-RevId: 506920930
* Overload added `(cause, errorCode, isVideo, isDecoder, details)`,
where `details` is a string of values to be added to the error message
of the `TransformationException`.
* Overload with `MediaFormat` and `mediaCodecName` moved to
`DefaultCodec`, because all usages of that overload were from
`DefaultCodec`, and this allows a simplified API because of internally
stored values.
* `mediaCodecName` removed from overload that takes a `Format`.
* Reordered `createForCodec` parameters.
PiperOrigin-RevId: 506895268
In encoding small and odd-numbered resolutions, like `316x61` ([this image](https://upload.wikimedia.org/wikipedia/commons/6/65/100winners.png)), the current fallback logic prefers a software encoder to hardware ones. The assumption was, the encoder factory applies the encoder size alignment and changes the resolution to `316x60` for SW encoders and `316x64` for HW ones. SW encoders is selected because the supported resolution 60 is closer to requested 61, than the hardware supported 64.
This change changes the default encoder selection process to only expose hardware encoders if there is any.
PiperOrigin-RevId: 506879983
With multi-asset, the sample pipelines can process more than one
MediaItem. The renaming makes it clear that the format passed to the
SamplePipeline constructors is the one corresponding to the first
MediaItem. Indeed, the first format is the one used to configure the
SamplePipelines.
PiperOrigin-RevId: 506879260
Set the correct output color on the debug SurfaceViewWrapper, so that SDR contents
can have an output transfer of either GAMMA_2_2 (Gamma 2.2) or SDR (SMPTE 170M).
This fixes an issue where in-app tone-mapping would output gamma 2.2, and the
SDR value incorrectly hardcoded here would lead to an error in the OpenGL, which
does not support SMPTE 170M.
PiperOrigin-RevId: 506684602
Before this CL, the `renderedLastFrame` flag is not set if the last frame is released immediately (force render), or when it's dropped.
PiperOrigin-RevId: 506358626
With the current ExtTexMgr,
it can happen that
- `x` frames are registered, but haven't arrived yet
- flush
- need to drop `x` frames when they arrive on SurfaceTexture
- status is reset to 0 pending, 0 available, drop `x` when frames arrive
- register one frame
- status is set to 1 pending, 0 available, drop `x` when frames arrive
- flush
- now the number of frame to drop is reset to `pending - available = 1`
- but it should be `x+1`
This CL solves the issue by reporting (by running the afterFlushTask) flush completes only after all the pending frames before calling flush are accounted for.
PiperOrigin-RevId: 506310671
The prior version (with the call to createEncodingException) could
never occur as select...SupportedMimeType already checks for HDR
editing support. This change ensures we throw before creating an
encoder, gives a better error code and allows future simplifications
around createForCodec (see child CL).
PiperOrigin-RevId: 506308290
Flushing resets all the texture processors within the `FrameProcessor`. This
includes:
- At the back, the FinalMatrixTextureProcessorWrapper, and its MatrixTextureProcessor
- At the front, the ExternalTextureManager
- All the texture processors in between
- All the ChainingGlTextureProcessorListeners in between texture processors
- All the internal states in the aforementioned components
The flush process follows the order, from `GlEffectsFrameProcessor.flush()`
1. Flush the `FrameProcessingTaskExecutor`, so that after it returns, all tasks queued before calling `flush()` completes
2. Post to `FrameProcessingTaskExecutor`, to flush the `FinalMatrixTextureProcessorWrapper`
3. Flushing the `FinalMatrixTextureProcessorWrapper` will propagate flushing through, via the `ChainingGlTextureProcessorListener`
Startblock:
has LGTM from christosts
and then
add reviewer andrewlewis
PiperOrigin-RevId: 506296469
The eotf is needed so that overlay (image) colors are correctly interpreted and mixed the linear video colors.
Also replaces the 100winners.png with "homemade" image file.
Added GlEffectsFrameProcessor test to justify that the color looks correct at the end of frame processing.
PiperOrigin-RevId: 506290309
Can be used to combine multiple media items into a single timeline window.
Issue: androidx/media#247
Issue: google/ExoPlayer#4868
PiperOrigin-RevId: 506283307
