Also, update tests to allow AnyOf error codes, and no longer check exception messages, which caused quite a bit of churn.
PiperOrigin-RevId: 479570861
(cherry picked from commit faa796d736)
This mode is supported by using `C.TIME_UNSET` (which is a negative value). The
new logic decouples the value of `C.TIME_UNSET` and the frame dropping
behaviour.
PiperOrigin-RevId: 479368880
(cherry picked from commit ccab9fba03)
* Add `setOutputStreamOffsetUs(long)` method in `AudioSink`.
* Add private methods `setOutputStreamOffsetUs(long)` method in `MediaCodecRenderer` and `DecoderAudioRenderer`.
* Add protected method `onOutputStreamOffsetUs(long)` method in `MediaCodecRenderer`, in which:
* `MediaCodecRenderer` itself will be no-op for this method.
* `MediaCodecAudioRenderer` will propagate this value to its `audioSink`.
* Add logics in `DecoderAudioRenderer` to calculate `outputStreamOffsetUs`.
PiperOrigin-RevId: 479265429
(cherry picked from commit 4c73241058)
The JavaDoc of RequestMetadata should point to the media3 controller,
not the platform one.
PiperOrigin-RevId: 479047924
(cherry picked from commit 0889589947)
Currently `FrameProcessor.releaseOutputFrame()` method supports
Release at a specific system time
Drops the frame
This API is not that convenient to use when the caller wants to release a frame, now, regardless of the release time. A use case is to release (present) a frame when no frame is shown for a while, and it's thus better to just release the frame, now.
Currently if MCVR wants a frame to be rendered now, MCVR calls release frame with a set offset like 10us: `releaseOutputFrame(System.nanoTime() + 10_000)`. The 10us offset is to prevent the frame processor dropping the frame, due to thread hopping delays.
To make the API better usable, consider adding a mode for releasing the frame now, like (bold marks the new mode)
- Use C.TIME_UNSET to drop
- **Use -1 to release the frame immediately, or**
- Use an actual release time.
PiperOrigin-RevId: 479044215
(cherry picked from commit ff8dd0b4b9)
Assert that tone mapping is applied when an HDR edit cannot be HDR, but is successfully tone mapped. Meanwhile, assert that fallback, which is applied after codec configuration (which throws the "Tone-mapping requested but not supported by the decoder" error) is not applied when that error is called.
PiperOrigin-RevId: 478762951
(cherry picked from commit 36e41059ea)
"Final" was likely added to reference the FinalMatrixTextureProcessorWrapper,
which is a package-private class. However, I think more clear to express that
this is the input size, which then has all effects applied, to get the output
size.
PiperOrigin-RevId: 477975358
(cherry picked from commit 7286155fc3)
Rename test files to avoid substrings that can be implied by the directory name,
like "Transformation" and "Test"
No functional changes. Renaming-only.
PiperOrigin-RevId: 477724724
(cherry picked from commit 9786802527)
This allows to access the associated functionality of AudioTrack and
fills a feature gap to MediaPlayer, which has a similar method.
Issue: androidx/media#135
PiperOrigin-RevId: 476398964
(cherry picked from commit ccb820dd2f)
* Before this CL, the texture was stored during the construction of the LUT processor. This failed since if one creates a list of GlEffects on the application thread, the texture will get stored in the application thread during the effect creation and not on the GL thread, which executes the FrameProcessors.
* This is an issue since the executing thread then can't index from the texture stored on a different thread.
PiperOrigin-RevId: 476388021
(cherry picked from commit f745c6ee0e)
If the sample type is dolby vision and the following conditions match
a)There is a supported alternative codec mimetype
b)Display does not support Dolby Vision
Then getDecoderInfos will return the alternative types.
Issue: google/ExoPlayer#9794
PiperOrigin-RevId: 476356223
(cherry picked from commit 94a88e93d9)
* Transform the intermediate color space to linear SDR by applying the SMPTE 170M EOTF and OETF.
* Use linear colors for the color filter pixel tests and update all golden bitmaps.
PiperOrigin-RevId: 476124592
(cherry picked from commit afd829e5db)
The ClearKey CDM will attach an 'invalid' URL in `KeyRequest` objects,
when the documentation states this should be an empty string if a
default URL is not known.
#minor-release
PiperOrigin-RevId: 476113513
(cherry picked from commit 331d4d626f)
*** Original commit ***
Handle int instead of byte in SSIM.
The value of pixels are converted to integers at the point of use,
move this logic to the initialisation step.
This is a prerequisite step for testing SSIM calculation, which
will lead on to some SSIM improvements being verifiable.
Tested manually and SSIM values match for the same video
before and after this change.
***
PiperOrigin-RevId: 473259446
(cherry picked from commit 8f9c9d0f88)
The value of pixels are converted to integers at the point of use,
move this logic to the initialisation step.
This is a prerequisite step for testing SSIM calculation, which
will lead on to some SSIM improvements being verifiable.
Tested manually and SSIM values match for the same video
before and after this change.
PiperOrigin-RevId: 473231779
(cherry picked from commit eb6c1183b6)
Test that HDR editing succeeds on devices supporting HDR editing, tone maps on
devices supporting tone mapping, and throws exceptions on all other devices.
Also, only restrict HDR editing and tone mapping support to API 31+ only when
transcoding, not for all transformations.
PiperOrigin-RevId: 472958965
(cherry picked from commit 8ee2121627)
If the back buffer is using too much memory, there is a risk
playback could get stuck because LoadControl refuses to load
further data. This eventually results in a stuck-buffering
playback error.
We can detect this case, clear the back buffer and then ask
the LoadControl again to avoid failing playback in such a case.
PiperOrigin-RevId: 472679797
(cherry picked from commit 125646e4c9)
The stream offset is used to calculate the presentation time of
a metadata object when reading and later when playing, to calculate
the current presentation time to decide whether to send the metadata
to the output.
Accordingly, the presentation time of a pending metadata that has been
calculated with a given offset needs to be recalculated when the
stream offset changes.
#minor-release
PiperOrigin-RevId: 472499943
(cherry picked from commit 5a1223777c)
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (3 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 472254253
(cherry picked from commit 8396647896)
shouldPassthrough's internal checks seem to be check whether we should *not*
pass through, which seemed a bit like a confusing double-negative to me.
shouldTranscode is slightly more clear, by instead returning true when we do
want to transcode.
No functional changes intended.
PiperOrigin-RevId: 471753771
(cherry picked from commit 1a4cd549a4)
3b0d2c1586 made `shouldPassthrough` always return false for `enableHdrVideoEditing`:
>We force using `FrameEditor` (no passthrough) to avoid the need to select another edit operation, and use the new shaders. The `EGLContext` and `EGLSurface` also need to be set up differently for this path.
However, this was introduced before the `videoNeedsEncoding` setting was introduced in 3f615040c0. That setting should apply to HDR videos as much as SDR videos.
PiperOrigin-RevId: 471569853
(cherry picked from commit 94713a8ffb)
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (3 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 471198016
(cherry picked from commit bac7d697c3)
In particular, make it a bit more clear that "rendering" and "releasing" frames are
related concepts, and how they differ from one another in conjunction with frame
dropping.
PiperOrigin-RevId: 471037733
(cherry picked from commit e6a1936ba9)
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (19 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 471022923
(cherry picked from commit 674b3d4575)
Native multidex can only be used for binaries with minSdkVersion of 21 or higher, but minSdkVersion was specified to 16.
PiperOrigin-RevId: 470003836
(cherry picked from commit 142d1c062c)
