When the controller replaces the current item, the masking position will be changed to the default position of the new item for a short while, before the correct position comes from the session. This will interrupt the current position fetched from the controller when the playback doesn't interrupted by the item replacing.
Issue: androidx/media#951
#minor-release
PiperOrigin-RevId: 611417539
This change aims to prioritise tracks that have a 'smooth enough for
video' frame rate, without always selecting the track with the highest
frame rate.
In particular MP4 files extracted from motion photos sometimes have two
HEVC tracks, with the higher-res one having a very low frame rate (not
intended for use in video playback). Before this change
`DefaultTrackSelector` would pick the low-fps, high-res track.
This change adds a somewhat arbitrary 10fps threshold for "smooth video
playback", meaning any tracks above this threshold are selected in
preference to tracks below it. Within the tracks above the threshold
other attributes are used to select the preferred track. We deliberately
don't pick the highest-fps track (over pixel count and bitrate), because
most users would prefer to see a 30fps 4k track over a 60fps 720p track.
This change also includes a test MP4 file, extracted from the existing
`jpeg/pixel-motion-photo-2-hevc-tracks.jpg` file by logging
`mp4StartPosition` in
[`MotionPhotoDescription.getMotionPhotoMetadata`](b930b40a16/libraries/extractor/src/main/java/androidx/media3/extractor/jpeg/MotionPhotoDescription.java (L123))
and then using `dd`:
```
mp4StartPosition=2603594
$ dd if=jpeg/pixel-motion-photo-2-hevc-tracks.jpg \
of=mp4/pixel-motion-photo-2-hevc-tracks.mp4 \
bs=1 \
skip=2603594
```
----
This solution is in addition to the `JpegMotionPhotoExtractor` change
made specifically for these two-track motion photos in
5266c71b3a.
We will keep both changes, even though that change is not strictly
needed after this one, because adding the role flags helps to
communicate more clearly the intended usage of these tracks. This
change to consider FPS seems like a generally useful improvement to
`DefaultTrackSelector`, since it seems unlikely we would prefer a 5fps
video track over a 30fps one.
Issue: androidx/media#1051
PiperOrigin-RevId: 611015459
Some devices supporting Performance Points for decoder coverage are missing coverage over the CDD requirements for H264. For these cases ExoPlayer should fall back to legacy resolution and frame rate support checks. If there is a stream evaluated as a PerformancePointCoverageResult of COVERAGE_RESULT_NO, then ExoPlayer checks for coverage of the 720p H264 CDD requirement.
Issue: google/ExoPlayer#10898
Issue: androidx/media#693
Issue: androidx/media#966
PiperOrigin-RevId: 609740128
If the reading period has already advanced and a track reselection procs that only affects the reading period media, then ExoPlayer may try and apply the reading period's track selection incorrectly unto the playing period. ExoPlayer should apply the playing period's track selection to the playing period instead.
PiperOrigin-RevId: 609375077
If render error occurs due to AudioTrack initialization failure in offload mode, then ExoPlayer should allow retry as subsequent attempt will be with DefaultAudioSink disabling offload.
PiperOrigin-RevId: 609304897
The `PreloadMediaPeriod.selectTracksForPreloading` can be called for multiple times at the preloading stage (before the period is being played). For example, when the period resumes preloading. This change fix the assertion failure in `ProgressiveMediaPeriod.selectTracks` caused by the wrong implementation of `PreloadMediaPeriod.selectTracksForPreloading` when it is trying to retain the previously preloaded streams.
Also the `TrackSelectorResult` parameter is changed to a list of `ExoTrackSelection`. We should compare the selections only rather than considering the `RendererConfiguration` in the `TrackSelectorResult` to decide whether to retain the streams, as for preloading case the renderers haven't consumed the samples yet.
PiperOrigin-RevId: 609126868
Previously, the track format was used in VideoSampleExporter. Now, we use a
simulated decoder output format.
As the last expected change for this bug, also adds release notes
PiperOrigin-RevId: 609080629
Also introduce a fluent API that allows callers to ignore non-fatal
errors (while avoiding adding boolean overloads for every method).
**Most** tests want to fail on non-fatal errors (since they likely
indicate user-visible issues like codec errors etc), only tests
explicitly testing fallback in error scenarios should want to ignore
them.
Before this change there were a few `playUntilXXX` methods. These can
now all be triggered via `play(player).untilXXX`, which means
effectively every 'until' condition is available in a 'play until'
variant that calls `play` just before waiting for the condition.
PiperOrigin-RevId: 608988234
MediaCodec docs already allude to potentially mismatching H.264 level
between container and bitstream. Relax the initialization data check to
reflect this.
PiperOrigin-RevId: 608942322
These were previously somewhat supported, but the `package` part was
never read (so it only worked if it was either absent or the same as the
current application's package). This change parses and uses the
`package` part.
This partially reverts 35121a2d3d.
This is hard to test for the same reasons as 88f554c74b:
> This is hard to test because to do so robustly requires being able to guaranteed that another test APK will be installed with a known raw resource inside it.
PiperOrigin-RevId: 608270463
Previously, we missed the BT2020->BT709 color-space conversion.
A user-visible impact of this is that red and green channels used to be
undersaturated, but now are more correctly saturated.
PiperOrigin-RevId: 605411926
`Uri.appendQueryParameter` is documented to encode its arguments, so
calling `Uri.encode` beforehand results in double-encoding.
Issue: androidx/media#1075
#minor-release
PiperOrigin-RevId: 604995441
Relax the regex to only check for hyphen which is required by the specification.
Issue: androidx/media#1028
#minor-release
PiperOrigin-RevId: 604719300
This was already done for the TrackGroup ids in <unknown commit>,
but in some scenarios only the Format instances are known and
it's helpful to be able to identify where they came from.
Issue: androidx/media#883
#minor-release
PiperOrigin-RevId: 604644039
This ensures RequestMetadata with just non-null extras is not
considered equal to RequestMetadata.EMPTY. This makes sure the
contents are bundled when a controller sets the extras in a
new MediaItem.
PiperOrigin-RevId: 604632788
The updated algorithm has two main improvements:
- The silence padding is not constant but a ratio of the original
silence (up to a defined max) to more naturally represent the
original gaps.
- The silence is not instantly going to zero, but uses a ramp down
and up for a smooth volume transition and also retains a small
percentage of the original noise for more natural "silences" that
still contain some background noise.
#minor-release
Issue: google/ExoPlayer#7423
PiperOrigin-RevId: 602322442
DASH: `DashMediaSource.Factory` would only propagate it to `DashChunkSource.Factory` -> `BundledChunkExtractor.Factory`
SS: `SSMediaSource.Factory` -> `SsChunkSource.Factory`
HLS: `HlsMediaSource.Factory` -> `HlsExtractorFactory`
Remove nullability of SubtitleParser.Factory across the stack
#minor-release
PiperOrigin-RevId: 601250013
The `SubtitleParser.Factory` is no longer @Nullable and the experimenting toggle is used to enable/disable the use of this factory for subtitle parsing during extraction.
The three places that will hold the "truth" for the `SubtitleParser.Factory` are: BundledChunkExtractor.Factory, SsChunkSource.Factory, DefaultHlsExtractorFactory
DASH: `DashMediaSource.Factory` would only propagate it to `DashChunkSource.Factory` -> `BundledChunkExtractor.Factory`
SS: `SSMediaSource.Factory` -> `SsChunkSource.Factory`
HLS: `HlsMediaSource.Factory` -> `HlsExtractorFactory`
#minor-release
PiperOrigin-RevId: 601151615
Populate both `artworkUri` and `artworkData` in
`MediaMetadata.Builder.populate(MediaMetadata)` when at least one of them is non-null.
Issue: androidx/media#964
PiperOrigin-RevId: 600826103
Imported from GitHub PR https://github.com/androidx/media/pull/275
Added below mentioned features.
- Support for extracting DTS LBR(DTS Express) and DTS UHD Profile 2(DTS:X) descriptor ID from PSI PMT
- The DTSReader class is updated for extracting a DTS LBR.
- Newly added DtsUhdReader class for extracting DTS UHD frame.
- The DTSUtil class is updated to parse the DTS LBR or DTS UHD frame and report the format information.
Feature request for ExoPlayer: https://github.com/google/ExoPlayer/issues/11075
Merge 21efa0810db31550d6b215639f9ca2af6a32139a into 104cfc322c
COPYBARA_INTEGRATE_REVIEW=https://github.com/androidx/media/pull/275 from rahulnmohan:dts-mpeg2ts-update 21efa0810db31550d6b215639f9ca2af6a32139a
PiperOrigin-RevId: 598854998
Subclasses of this component can customize it by wrapping with the
decorator pattern, and a custom `CompositeSequencableLoaderFactory`
allows access to the list of delegate `SequenceableLoader` instances.
The `final` keyword was removed as part of <unknown commit> but this
component never ended up being subclassed within the library.
Making this class `final` makes upcoming changes easier to reason
about.
PiperOrigin-RevId: 597853429
The seek table in a Xing/Info header is very imprecise (max resolution
of 255 to describe each of 100 byte positions in the file). Seeking
using a constant bitrate assumption is more accurate, especially for
longer files (which exacerbates the imprecision of the Info header).
VBR files should contain an Xing header, while an Info header is
identical but indicates the file is CBR.
Issue: androidx/media#878
PiperOrigin-RevId: 597827891
