This replaces the deprecated usages of RobolectricTestRunner and
RuntimeEnvironent and fully migrates the tests to androidx.
PiperOrigin-RevId: 238011667
Stop encoding/decoding presentation time as part of the message.
What's actually in emsg boxes is a presentation time delta,
which is why it's only 32 bits, and hence why it doesn't handle
large absolute timestamps. We were using this field to hold
absolute timestamps only for the purpose of passing presentation
times from DashManifestParser.parseEvent back to the calling
method. After this change, we return Pair<Long, EventMessage>
instead.
Issue: #5490
PiperOrigin-RevId: 233561731
This requires to prepare the media source and the periods in a small helper similar
to the metadata retriever. It also gets rid of the need to have abstract protected
methods to load the manifest, to extract the track groups and to convert to stream keys,
as this can now be handled by the media period.
PiperOrigin-RevId: 231385590
That's the same position set in MediaPeriod.prepare (where it may be removed
in the future).
Having the position at an earlier point is necessary to fix an
issue with lazy preparation in ConcatenatingMediaSource where the prepare
position was assumed to be known but MediaPeriod.prepare hasn't been called
yet.
Issue:#5350
PiperOrigin-RevId: 229756637
When the extra adaptation set of a switch group isn't defined in the manifest, we
currently assume it's the first adaptation group. This either leads to wrong grouping
or duplicate track groups.
Such a case may easily happen if the manifest is filtered such that only one of the
switch adaptation sets will be present in the manifest.
PiperOrigin-RevId: 229365379
They are not longer needed anywhere, are error-prone (because of threading
requirements), and complicate testing and using MediaSources without a player.
PiperOrigin-RevId: 227871157
- Enable GZIP for media playlist + encryption key chunk requests in
HLS, as we do during playback
- Pass around DataSpecs rather than Uris. This will be needed for if
we add manifest cacheKey support (which seems like a good idea for
completeness, if nothing else)
PiperOrigin-RevId: 224057139
Moving most of the logic to the base DownloaderHelper helps to implement track
selection for downloading in a single place instead of multiple places.
PiperOrigin-RevId: 223964869
A remove action will eventually just be the unique ID of the download
that should be removed. This is a step toward that goal.
PiperOrigin-RevId: 222832456
1. Pull up all subclasses of DownloadAction into DownloadAction
2. Add DownloaderFactory for Downloader instantiation, and DefaultDownloaderFactory
to replace the instantiation logic being removed from the DownloadAction
subclasses.
This change will upgrade existing action files gracefully (i.e. it does not
lose compatibility with the existing offline implementation, other than some
minor breaking changes to the API).
TODOs:
1. Move test methods from the XDownloadActionTest classes into DownloadActionTest.
This will be done in a subsequent CL. There's a lot of consolidation that can
be done here, including de-duplicating some of the test code added in this CL.
2. Look at merging DownloaderConstructorHelper into DefaultDownloaderFactory.
3. Use customCacheKey in DASH/HLS/SS Downloaders, for completeness.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=222258983
The remaining work is to split Window.isDynamic so that it's
possible to represent a window that wont be appended to, but
may still be removed from.
Issue: #4780
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=221439220
Robustness fix to make sure we ignore tags with known names, but
which are nested inside of unknown tags. For example we don't want
to parse the third period in:
<Period>...</Period>
<Period>...</Period>
<CustomTag>
<Period>...</Period>
</CustomTag>
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=217101630
- Always clip to period duration for the last chunk. We previously
did this only when the last chunk explicitly exceeded the period
end time. We now also do it when the chunk claims to end at the
period boundary, but still contains samples that exceed it.
- If pendingResetPositionUs == chunk.startTimeUs == 0 but the
chunk still contains samples with negative timestamps, we now
clip them by setting the decode only flag. Previously we only
clipped such samples if the first chunk explicitly preceeded the
start of the period.
Issue: #4899
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215763467
Currently there is no way to disable (or reduce) the logcat output generated
by ExoPlayer.
Issue:#4665
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=213421072
The default character set is always UTF-8 anyway on Android, but
we don't want our code to behave any differently where it's not
(e.g. robolectric test runs could potentially run in an environment
where UTF-8 isn't the default?).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=211953885
This provides the list of currently buffered media chunks and iterators over
the potential next chunks to the track selection. Having these two parameters
enables more advanced decision logic based on this data.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=210551812
The response headers of the last load are available from the loading source
when creating media source events and can be easily forwarded.
Issue:#4361
Issue:#4615
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=209900693
The MediaPeriodId with index is only properly defined together with a
timeline containing the index. Changing it to the period uid allows to use
the MediaPeriodId independent of the corresponding timeline.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=209430257
Also fix an NPE in FfmpegAudioRenderer if sampleMimeType wasn't set.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=208230947
For now, just allow any prefix (and don't check the namespace).
Checking the namespace requires turning on the XmlPullParser
namespace awareness feature, but this can only be done before
parsing, and I think requires us to specify the namespace when
querying other attributes. This would also risk breaking services
who currently don't set namespaces correctly.
It's possible we'll run into similar issues with the few other
tags (e.g. mspr:pro). We should revisit enabling namespace
awareness if/when we see this.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=207526883
EventSampleStream.readData required eventStreamUpdatable to be
false for END_OF_STREAM to be returned, but it was only being
set to false when the manifest became static. This change also
sets it to false if the period is not the last one in a dynamic
manifest. It also renames it the parameter to appendable, since
that's what it really represents. Events may still be removed
from the start of the EventStream as the period starts moving
out of the live window.
Issue: #4492
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=207517265
All known instances use DataSource as generic type and thus code can be simplified
by removing the generic type altogether.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=205798542
As the manifest and media data sources can be the same now, we can provide
a simplified constructor with just one data source factory.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=205658046
This removes the need to populate the entire period for the common usage of
getting the uid from the period.
Also add default implementation to get period by uid.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=205638265
Until now, the streams were released and re-enabled for each type of stream
(primary, event, embedded) in that order. That leads to problems when replacing
streams from one type to another (for example embedded to primary).
This change restructures the track selection to:
1. Release and reset all streams that need to be released or replaced.
1(a). Including embedded orphan streams.
2. Select new streams.
Issue:#4477
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203751233
This wires up recent changes of passing a transfer listener to the MediaSource and
allowing DataSources to accept new listeners.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203280818
This allows to use this queue in the track selection in the future.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202954871
This will allow to provide available information about future chunks to the
track selection.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202940994
In the future, this allows to register the BandwidthMeter (managed by the player)
as a listener to all media transfers related to this media source.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202643946
This url is readily available when creating media source events (from the
data source) but so far not published to external listeners. This change
adds a new field to LoadEventInfo which corresponds to DataSource.getUri().
Issue:#2054
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202459049
Also moved shared code to SegmentDownloadAction between its subclasses.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202294880
