`sed` has a different in-place command line syntax in FreeBsd
than GNU tools. This change makes the `sed` commands work with
FreeBSD `sed` on OSX in bash and zsh shells.
Issue: androidx/media#217
PiperOrigin-RevId: 522043938
MediaItems are not meant to be unique in a playlist. If a legacy
session publishes multiple items that get converted to equal MediaItems,
the current code fails because we look up queue ids in a Map (that
doesn't allow duplicate entries).
Fix this by storing a simple list of items with additional data.
#minor-release
Issue: androidx/media#290
PiperOrigin-RevId: 521993802
* Add a new event `onAudioCapabilitiesChanged` in `AudioSink.Listener` interface.
* Add an interface `RendererCapabilities.Listener`, which will listen to `onRendererCapabilitiesChanged` events from the renderer.
* Add `getRendererCapabilitiesReceiver` method for `TrackSelector`, and register/unregister the `TrackSelector` as the `RendererCapabilitiesReceiver` (if implemented) when the `ExoPlayer` is initialized/released.
* Trigger the `AudioSink.Listener.onAudioCapabilitiesChanged` and further `RendererCapabilities.Listener.onRendererCapabilitiesChanged` events when the audio capabilities changes are detected in `DefaultAudioSink`.
PiperOrigin-RevId: 521427567
The `DashMediaSource` wrongly added an offset to the media times set
to the `MediaLoadData`. With this the `startTimeMS` and `endTimeMs`
don't represent the positions in the period but in the stream.
`DashMediaSource` was the only call site that was setting the offset
to a non-zero value. So if we are using 0 for the `DashMediaSource`
as well, the offset is redundant and we can remove it everywhere.
PiperOrigin-RevId: 520682026
For multi-period live streams the content timeline for
which the global ad playback state has been split needs
to be kept together to not run into a race between
timeline refreshes and ad events.
PiperOrigin-RevId: 520358964
If RTSP Setup Request with UDP receives HTTP Error Status 461 UnsupportedTransport, then client will retry with TCP.
Issue: google/ExoPlayer#11069
PiperOrigin-RevId: 518807829
* Add `release` method to Renderer and AudioSink interfaces.
* Call the `release` method for renderers when the ExoPlayer is going to be released.
PiperOrigin-RevId: 517135677
While playback thread is 'asleep' during audio offload playback, the playbackInfo.positionUs is not being constantly updated. During this time, the returned value from getCurrentPosition should return an estimate based on the most recent value and playback speed.
PiperOrigin-RevId: 516550509
The value returned by `player.getContentPosition()` is calculated
in the timeline based on the position of the first period in the
window. In a single period live stream this position is advanced
when the live window advances on timeline refresh.
This calculation has produced slightly varying values below 1000
us which are likely caused by us/ms truncations for public API
values that we use in the IMASSAIMediaSource.
However, `AdGroup.timeUs` is the (recorded) content position at the
moment when the first ad of the an ad group has been inserted. While
playing an ad, we can always use this value instead of
`getContentPosition()` to not require recalculation.
#minor-release
PiperOrigin-RevId: 515093177
Segment timelines are technically allowed to be empty, but not all places
add the necessary checks.
Issue: google/ExoPlayer#11014
PiperOrigin-RevId: 514722205
Playback parameter signalling can be quite complex because
(a) the renderer clock often has a delay before it realizes
that it doesn't support a previously set speed and
(b) the speed set on media clock sometimes intentionally
differs from the one surfaced to the user, e.g. during
live speed adjustment or when overriding ad playback
speed to 1.0f.
This change fixes two problems related to this signalling:
1. When resetting the media clock speed at a period transition,
we don't currently tell the renderers that this happened.
2. When a delayed speed change update from the media clock is
pending and the renderer for this media clock is disabled
before the change can be handled, the pending update becomes
stale but it still applied later and overrides any other valid
speed set in the meantime.
Both edge cases are also covered by extended or new player tests.
Issue: google/ExoPlayer#10882
#minor-release
PiperOrigin-RevId: 512658918
MediaCodecRenderer currently has two independent paths to trigger
events at stream changes:
1. Detection of the last output buffer of the old stream to trigger
onProcessedStreamChange and setting the new output stream offset.
2. Detection of the first input buffer of the new stream to trigger
onOutputFormatChanged.
Both events are identical for most media. However, there are two
problematic cases:
A. (1) happens after (2). This may happen if the declared media
duration is shorter than the actual last sample timestamp.
B. (2) is too late and there are output samples between (1) and (2).
This can happen if the new media outputs samples with a timestamp
less than the first input timestamp.
This can be made more robust by:
- Keeping a separate formatQueue for each stream to avoid case A.
- Force outputting the first format after a stream change to
avoid case B.
Issue: google/ExoPlayer#8594
#minor-release
PiperOrigin-RevId: 512586838
Some devices were reported to have wrong PerformancePoint sets
that cause 60 fps to be marked as unsupported even though they
are supported.
Issue: google/ExoPlayer#10898
#minor-release
PiperOrigin-RevId: 512580395
Protected system broadcasts should not specify the export flag.
Marking them as NOT_EXPORTED breaks sticky broadcasts in some
cases.
Issue: google/ExoPlayer#10970
#minor-release
PiperOrigin-RevId: 512020154
In parsing Describe RTSP response messages, IllegalArgumentExceptions are thrown for invalid parameters and values. These exceptions were not caught and crashed the Playback thread. Now these exceptions will be caught and their errors forwarded to the proper error handling listeners.
#minor-release
Issue: google/ExoPlayer#10971
PiperOrigin-RevId: 509207881
`TrackSelectorResult.rendererConfigurations` can contain null elements:
> A null entry indicates the corresponding renderer should be disabled.
This wasn't caught by the nullness checker because `ExoPlayerImpl` is
currently excluded from analysis.
#minor-release
Issue: google/ExoPlayer#10977
PiperOrigin-RevId: 508619169
Can be used to combine multiple media items into a single timeline window.
Issue: androidx/media#247
Issue: google/ExoPlayer#4868
PiperOrigin-RevId: 506283307
This change fixes an issue that can be reproduced when
a controller `onConnect` creates a `QueueTimeline` out
of the state of a legacy session and then `prepare` is called.
`activeQueueItemId`, `metadata` and the `queue` of the legacy
session are used when a `QueueTimeline` is created. The change
adds unit tests to cover the different combinatoric cases these
properties being set or unset.
PiperOrigin-RevId: 505731288
ParcelFileDescriptor is quite specific and removing it allows to have
less overloads of startTransformation.
A follow-up CL will undeprecate the overload that takes a MediaItem.
PiperOrigin-RevId: 505670321
When seeking in fMP4, we try to extract as little samples as possible
by only starting at the preceding sync frame. This comparison should
use <= to allow sync frames at exactly the seek position.
Issue: google/ExoPlayer#10941
#minor-release
PiperOrigin-RevId: 505098172
Added onSetMediaItems callback listener to allow the session to modify/set MediaItem list, starting index and position before call to Player.setMediaItem(s).
Added conditional check in MediaSessionStub.setMediaItem methods to only call player.setMediaItem rather than setMediaItems if player does not support COMMAND_CHANGE_MEDIA_ITEMS
PiperOrigin-RevId: 503427927
Starting with API 33 the POST_NOTIFICATION permission needs to be
requested at runtime or the notification is not shown.
Note that with an app with targetSdkVersion < 33
but on a device with API 33 the notification permission is automatically
requested when the app starts for the first time. If the user does not
grant the permission, requesting the permission at runtime result in
an empty array of grant results.
Issue: google/ExoPlayer#10884
PiperOrigin-RevId: 501320632
For TV devices the skip button needs to have the focus to be accessible with
the remote control. This property makes this configurable while being set to
true by default.
PiperOrigin-RevId: 501077608
When audio processors are enabled during tunneling, they must produce
output immediately, ensuring that the timestamps of the output samples
correspond to the input and that no additional samples are produced.
This requirement is documented in the Javadoc of DefaultAudioSink.
However, this alone doesn't guarantee all buffers are immediately
written to the AudioTrack, because the AudioTrack writes are
non-blocking and may need multiple attempts.
When draining the audio sink at the end of the stream, we currently
fail in this situation because we assert that the timestamp must be
set (=the drain operation is a no-op). But this may not be true when
the previous non-blocking write wasn't fully handled. We can fix this
by saving the last timestamp and reusing it during draining.
Issue: google/ExoPlayer#10847
PiperOrigin-RevId: 500943891
There are two overloads of this method due to a type 'rename' from
`PlayerControlView.VisibilityListener` to
`PlayerView.ControllerVisibilityListener`. Currently when you call one
overload it passes `null` to the other one (to clear the other listener).
Unfortunately this results in it clearing itself, because it receives
a null call back!
This change tweaks the documentation to clarify that the 'other'
listener is only cleared if you pass a non-null listener in. This solves
the recursive problem, and allows the 'legacy' visibility listener to be
successfully registered.
Issue: androidx/media#229
#minor-release
PiperOrigin-RevId: 496876397
The MediaSourceFactory won't be used by the other AssetLoaders
In order to do that, ExoPlayerAssetLoader has been made public, and the
DefaultAssetLoaderFactory has become a wrapper around
ExoPlayerAssetLoader.
PiperOrigin-RevId: 496386853
These are the remaining setter operations. They all share the same
logic that handles playlist and/or position changes. The logic to
create the placeholder state is mostly copied from ExoPlayerImpl's
maskTimelineAndPosition and getPeriodPositonUsAfterTimelineChanged.
PiperOrigin-RevId: 496364712
BasePlayer simplifies implementations by handling all the various
seek methods and forwarding to a single method that can then be
implemented by subclasses. However, this loses the information about
the concrete entry point used for seeking, which is relevant when
the subclass wants to verify or filter by Player.Command. This
can be improved by adding the command as a new parameter. Since
we have to change the method anyway, we can also incorporate the
boolean flag about whether the current item is repeated to avoid
the separate method.
PiperOrigin-RevId: 494948094
The folder type has a mix of information about the item. It shows
whether the item is browsable (type != FOLDER_TYPE_NONE) and
which Bluetooth folder type to set for legacy session information.
It's a lot clearer to split this into a boolean isBrowsable and
use the existing mediaType to map back to the bluetooth folder type
where required.
folderType is not marked as deprecated yet as this would be an API
change, which will be done later.
PiperOrigin-RevId: 493544589
Discovered while investigating Issue: google/ExoPlayer#10823
Example stack trace with the previous code (I added the index value for
debugging):
```
playerFailed [eventTime=44.07, mediaPos=44.01, window=0, period=0, errorCode=ERROR_CODE_FAILED_RUNTIME_CHECK
androidx.media3.exoplayer.ExoPlaybackException: Unexpected runtime error
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:635)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loopOnce(Looper.java:202)
at android.os.Looper.loop(Looper.java:291)
at android.os.HandlerThread.run(HandlerThread.java:67)
Caused by: java.lang.IllegalArgumentException: index=-1
at androidx.media3.common.util.Assertions.checkArgument(Assertions.java:55)
at androidx.media3.extractor.text.webvtt.WebvttSubtitle.getEventTime(WebvttSubtitle.java:62)
at androidx.media3.extractor.text.SubtitleOutputBuffer.getEventTime(SubtitleOutputBuffer.java:56)
at androidx.media3.exoplayer.text.TextRenderer.getCurrentEventTimeUs(TextRenderer.java:435)
at androidx.media3.exoplayer.text.TextRenderer.render(TextRenderer.java:268)
at androidx.media3.exoplayer.ExoPlayerImplInternal.doSomeWork(ExoPlayerImplInternal.java:1008)
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:509)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loopOnce(Looper.java:202)
at android.os.Looper.loop(Looper.java:291)
at android.os.HandlerThread.run(HandlerThread.java:67)
]
```
#minor-release
PiperOrigin-RevId: 492464180
Use the bitrate of the audio format (when available) in
DefaultAudioSink.AudioTrackBufferSizeProvider.getBufferSizeInBytes() to
calculate accurate buffer sizes for direct (passthrough) playbacks.
#minor-release
PiperOrigin-RevId: 491628530
This avoids that apps have to depend on the legacy compat support
library when they want to make this conversion.
Also add a version to both helper methods that takes a Looper to
give apps the option to use an existing Looper, which should be
much faster than spinning up a new thread for every method call.
Issue: androidx/media#171
PiperOrigin-RevId: 490441913
The method allows clients to specify a pre-existing thread
to use for playback. This can be used to run multiple ExoPlayer
instances on the same playback thread.
PiperOrigin-RevId: 488980749
Util.getAudioTrackChannelConfig() maps a channel count to a
channel mask that is passed to AudioTrack. The method expected that
playback of 8-channel audio is possible from Android 5.1 and playback of
12-channel audio is only possible from Android 12L. However, there is no
restriction on the upper number of channels that can be passed to the
AudioTrack. google/ExoPlayer#10701 is an example where the audio decoder
outputs 12 channels on an Android 10.
This change removes the restrictions for 8 and 12 channels. Note, we still
do not support playback of arbitrary number of channels as it would require
further changes to DefaultAudioSink.
#minor-release
Issue: google/ExoPlayer#10701
PiperOrigin-RevId: 488659831
When we currently trigger the iteration finished event during the
release, we don't mark the event as triggered. This means that
someone can trigger another release from within the callback,
which then tries to resend the event.
Issue: google/ExoPlayer#10758
#minor-release
PiperOrigin-RevId: 488645089
We currently skip this calculation entirely, but it can be added by
calculating the window duration using the wrapped window's duration
and the provided AdPlaybackState.
Issue: google/ExoPlayer#10764
PiperOrigin-RevId: 488614767
Added new method to check if codec just functionally supports a format. Changed getDecoderInfosSortedByFormatSupport to use new function to order by functional support. This allows decoders that only support functionally and are more preferred by the MediaCodecSelector to keep their preferred position in the sorted list.
UnitTests included
-Two MediaCodecVideoRenderer tests that verify hw vs sw does not have an effect on sort of the decoder list, it is only based on functional support
Issue: google/ExoPlayer#10604
PiperOrigin-RevId: 487779284
The connection to a legacy MediaSession may receive additional
onSessionReady callbacks that are treated as additional state updates.
We currently also set the "notifyConnected" flag for these updates
even though we are connected already, causing an IllegalStateException.
Fix the exception by not setting this flag.
We can also remove the wording about "locked" updates since this class
operates everything on a single application thread.
Issue: androidx/media#49
PiperOrigin-RevId: 487487286
If an app sets a compileSdkVersion that is lower than the one used to
create AARs of its dependencies, the build process may produce invalid
outputs, for example by stripping methods from the APK that are only
called when the app is running on a new API version.
To avoid this issue, we can enforce that the compileSdk of apps or
libraries depending on ExoPlayer/Media3 is at least the same as the
one we used for compilation when creating the AAR.
Issue: google/ExoPlayer#10684
PiperOrigin-RevId: 485100067
From ANSI-CTA-608-E R-2014 section 8.4:
> When closed captioning is used on line 21, field 2, it shall conform
> to all of the applicable specifications and recommended practices as
> defined for field 1 services with the following differences:
> 1. The non-printing character of the miscellaneous control-character
> pairs that fall in the range of 0x14, 0x20 to 0x14, 0x2F in field 1,
> shall be replaced with 0x15, 0x20 to 0x15, 0x2F when used in field
> 2.
> 2. The non-printing character of the miscellaneous control-character
> pairs that fall in the range of 0x1C, 0x20 to 0x1C, 0x2F in field
> 1, shall be replaced with 0x1D, 0x20 to 0x1D, 0x2F when used in
> field 2.
This basically means that `cc1=0x15` in field 2 should be interpreted as
`cc1=0x14` in field 1, and same for `0x1D -> 0x1C`.
The `isMiscCode` method above already handles this by ignoring the LSB
(the only difference between `0x14` and `0x15`, and `0x1C` and `0x1D`)
by AND-ing with `0xF6` instead of `0xF7`. This change uses the same
trick in `isServiceSwitchCommand`.
Issue: google/ExoPlayer#10666
#minor-release
PiperOrigin-RevId: 483927506
Currently, repeating the same item (via seekNext/Previous) implicitly
results in a seek to the default position of the current item, which
looks exactly the same as a direct seek. As a result, we don't send
onMediaItemTransition as we would for every other seekNext/Previous
call.
This can be fixed by explicitly marking the repeat case in the internal
BasePlayer/ExoPlayerImpl methods, so that the callback can be triggered.
Issue: google/ExoPlayer#10667
PiperOrigin-RevId: 481951788
We already have logic to end all session except the current one if the
current one doesn't have a MediaPeriodId yet. This is assuming that this
only happens after a seek on the app side where the player doesn't have
detailled knowledge about the MediaPeriodIds yet.
Currently this logic isn't triggered if the window we are coming from
doesn't have its MediaPeriodId either as we run into another check that
keeps sessions around until we have a valid windowSequenceNumber.
Swapping both conditions fixes this case without breaking any of the
other known transition scenarios.
Issue: androidx/media#180
PiperOrigin-RevId: 480866465
If the sample type is Dolby Vision and the display does not support Dolby Vision, then the capabilities DecoderSupport flag is set to DECODER_SUPPORT_FALLBACK_MIMETYPE. This denotes that the renderer will use a decoder for a fallback mimetype if possible. This alters track selection as tracks with DecoderSupport DECODER_SUPPORT_PRIMARY are preferred.
UnitTests included
-DefaultTrackSelector test that checks track selection reordering with DECODER_SUPPORT_FALLBACK_MIMETYPE
-MediaCodecVideoRenderer test that checks setting of DecoderSupport flag based on Display's Dolby Vision support
Issue: google/ExoPlayer#8944
PiperOrigin-RevId: 480040876
A follow up to stopping speaker playback with a Player decorator from
https://github.com/androidx/media/issues/15.
It looks like we will need to change to using playback suppression to avoid
errors like https://github.com/androidx/media/issues/167, when we don't start
a foreground service.
We may not have this implemented by 1.0, but would like it in the API and it seems to be appropriate.
PiperOrigin-RevId: 478835686
`PlaybackStateCompat.toKeyCode(command)` was replaced by our
own implementation of `toKeyCode()`. The legacy implementation used PLAY and PAUSE, while the new implementation uses PLAY_PAUSE. This made `pause` a pending intent that attempt to start the service in the foreground, but `service.startForeground()` won't be called in `MediaNotificationManager.updateNotificationInternal` when paused.
PiperOrigin-RevId: 476895752
This allows to access the associated functionality of AudioTrack and
fills a feature gap to MediaPlayer, which has a similar method.
Issue: androidx/media#135
PiperOrigin-RevId: 476398964
If the sample type is dolby vision and the following conditions match
a)There is a supported alternative codec mimetype
b)Display does not support Dolby Vision
Then getDecoderInfos will return the alternative types.
Issue: google/ExoPlayer#9794
PiperOrigin-RevId: 476356223
The ClearKey CDM will attach an 'invalid' URL in `KeyRequest` objects,
when the documentation states this should be an empty string if a
default URL is not known.
#minor-release
PiperOrigin-RevId: 476113513
If the back buffer is using too much memory, there is a risk
playback could get stuck because LoadControl refuses to load
further data. This eventually results in a stuck-buffering
playback error.
We can detect this case, clear the back buffer and then ask
the LoadControl again to avoid failing playback in such a case.
PiperOrigin-RevId: 472679797
The assertion asserts against a `Period` and an `AdPlaybackState` which actually
asserts against a resolved ad which is what `ExoPlayerImplInternal` does later and
what gives us a `SEEK_ADJUSTMENT`. However, this assertion is not required at the
moment of masking, because we are sure that the resolved seek results in a content
period and never an ad period.
#minor-release
Issue: androidx/media#122
PiperOrigin-RevId: 471827072
The specified CMake version doesn't work with the latest
Android Studio releases. Updating to a more recent version
fixes the problem.
Issue: google/ExoPlayer#9933
PiperOrigin-RevId: 467634063
When the player finishes playback and reaches the STATE_ENDED,
the notification remains visible with a pause button and the
service is kept in the foreground. This is a bug.
With this change, when the player reaches the STATE_ENDED, the
service is stopped from the foreground and a notification is shown
with a play button. If the play icon is tapped, the player will restart
playback of the last played item. Playing the last played item again
is the existing behavior when play/pause commands are received from
the legacy MediaSession (e.g. BT headset buttons).
#minor-release
Issue: google/ExoPlayer#112
PiperOrigin-RevId: 467231509
From NDK 23.1.7779620 and above, the arm64-v8a ABI needs additional
build flags to correctly link the ffmpeg libraries.
Issue: google/ExoPlayer#9933
PiperOrigin-RevId: 467161973
In some cases, the IMA SDK fails to call the expected loadAd
event to load the next ad to play. This is (potentially) the
only remaining case where playback can get stuck due to missing
calls from IMA as the player doesn't even have a MediaSource at
this stage and is only waiting for IMA to provide the ad URL.
We can reuse the existing adPreloadTimeoutMs that was added for
a similar purpose (when preloading the first ad in the group).
The JavaDoc matches this purpose as well and the default timeout
is appropriate since we expect to get the loadAd call immediately.
Issue: google/ExoPlayer#10510
PiperOrigin-RevId: 466953617
Adds a new event to AudioOffloadListener to get the offload state of the track, which indicates when software decoding is taking place.
PiperOrigin-RevId: 465264362
Also rearranged release notes to correctly show when the changes were released.
#minor-release
PiperOrigin-RevId: 462361982
(cherry picked from commit c6e69a35a8)
We currently clear all pending messages, including the one that flushes
pending commands to the MediaSession. To ensure all commands that have
been called before controller.release() are still sent, we can manually
trigger the flush message from the release call.
Related to handling the final flush because disconnecting the controller,
MediaSessionStub didn't post the removal of the controller to the
session thread, creating a race condition between removing the controller
and actually handling the flush.
Issue: androidx/media#99
PiperOrigin-RevId: 462342860
Add a Builder to constructor DefaultMediaNotificationProvider. The
Builder can also set the provider's:
- notification ID
- notification channel ID
- notification channel name
The change adds an API for apps to set the small icon in notifications.
#minor-release
Issue: androidx/media#104
PiperOrigin-RevId: 462111536
Some commands are run asynchronously and subsequent commands need
to wait until the previous one finished. This can be supported
by returning a Future for each command and using the existing
command execution logic to wait for each Future to complete.
As some MediaSessionStub code is now executed delayed to when it
was originally created, we also need to check if the session is
not released before triggering any actions or sending result codes.
Issue: androidx/media#85
PiperOrigin-RevId: 462101136
The call doesn't currently reset the already loaded suppliers and
factories. Also fix the supplier loading code to use a local copy
of the current dataSourceFactory to avoid leaking an updated
instance to a later invocation.
Issue: androidx/media#116
#minor-release
PiperOrigin-RevId: 460721541
We currently start a simple Thread to release AudioTracks
asynchronously. If many AudioTracks are released at the same
time, this may lead to OOM situations because we attempt to
create multiple new threads.
This can be improved by using a shared SingleThreadExecutor.
In the simple case of one simmultaneous release, it's exactly
the same behavior as before: create a thread and release it
as soon as it's done. For multiple simultanous releases we
get the advantage of sharing a single thread to avoid creating
more than one at the same time.
Issue: google/ExoPlayer#10057
PiperOrigin-RevId: 460698942
The media item needs to be assigned to `Window.mediaItem` in `CastTimeline.setWindow`. For this the `MediaItem` needs to be available in the timeline.
When a `MediaItem` is passed to the `set/addMediaItems` method, we can't yet know the Cast `MediaQueueItem.itemId` that is generated on the device and arrives with an async update of the `RemoteMediaClient` state. Hence in the `CastTimelineTracker`, we need to store the `MediaItem` by Casts's `MediaItem.contentId`. When we then receive the updated queue, we look the media item up by the content ID to augment the `ItemData` that is available in the `CastTimeline`.
Issue: androidx/media#25
Issue: google/ExoPlayer#8212
#minor-release
PiperOrigin-RevId: 460325235
ProgressiveMediaPeriod loads all available tracks into SampleStreams
(because it needs to read the data anyway and it allows easy activation
of tracks without reloading). However, the SampleStreams for disabled
tracks are not read and no one if waiting for them.
The buffered position is used for user-visible state (e.g. in the UI)
and to check how much data is already buffered to decide when to stop
buffering (using LoadControl). Both values benefit from only
using the actually enabled tracks to better reflect what is available
for playback at the moment.
Issue:Issue: google/ExoPlayer#10361
PiperOrigin-RevId: 458475038
As per MP4 spec, bitrates in esds boxes can be a 32 bit number which doesn't fits in Java int type, so now reading it as a long value. Our class for holding media format, only allows bitrates value to be an int as we don't expect the bitrates to be greater than or equal to 2^31. So we're limiting the values for bitrates to Integer.MAX_VALUE.
#minor-release
PiperOrigin-RevId: 458423162
Previously two timelines that differed only in shuffle order were
considered equal, which resulted in no call to
Player.Listener.onTimelineChanged when calling
ExoPlayer.setShuffleOrder. This in turn resulted in no call to
MediaControllerCompat.Callback.onQueueChanged.
Also make a small fix inside ExoPlayerImpl.setShuffleOrder, to ensure
that the new shuffle order is used when constructing the masked
timeline.
Issue: google/ExoPlayer#9889
#minor-release
PiperOrigin-RevId: 457703727
This code path is now completely redundant as the same effect can be
achieved by using player.setMediaItem.
PiperOrigin-RevId: 455115567
(cherry picked from commit 21d4e85817)
These calls were not implemented so far as they require a mix of
initial prepareFrom/playFrom calls and addQueueItem. We can also
support clients without queue handling to set single MediaItems.
To make the calls consistent and predictable in the session,
we need to ensure that none of the play/pause/addQueueItem/
removeQueueItem/prepare/playFromXYZ/prepareFromXYZ are called
before the controller is prepared and has media.
#minor-release
PiperOrigin-RevId: 455110246
(cherry picked from commit b475f1f2da)
This code path is now completely redundant as the same effect can be
achieved by using player.setMediaItem.
#minor-release
PiperOrigin-RevId: 455115567
These calls were not implemented so far as they require a mix of
initial prepareFrom/playFrom calls and addQueueItem. We can also
support clients without queue handling to set single MediaItems.
To make the calls consistent and predictable in the session,
we need to ensure that none of the play/pause/addQueueItem/
removeQueueItem/prepare/playFromXYZ/prepareFromXYZ are called
before the controller is prepared and has media.
#minor-release
PiperOrigin-RevId: 455110246
`codecDrainAction` is set to `DRAIN_ACTION_NONE` in 3 places in
`MediaCodecRenderer`:
* The constructor (so there's no prior state to worry about)
* `updateDrmSessionV23()`: Where `mediaCrypto` is reconfigured based
on `sourceDrmSession` and `codecDrmSession` is also updated to
`sourceDrmSession`.
* `resetCodecStateForFlush()`: Where (before this change) the action
is unconditionally set back to `DRAIN_ACTION_NONE` and so any
required updated implied by
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` is not done.
This change ensures that `flushOrReleaseCodec()` handles
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` before calling .
This probably also resolves Issue: google/ExoPlayer#10274
#minor-release
PiperOrigin-RevId: 454114428
(cherry picked from commit 222faa96d0)
`codecDrainAction` is set to `DRAIN_ACTION_NONE` in 3 places in
`MediaCodecRenderer`:
* The constructor (so there's no prior state to worry about)
* `updateDrmSessionV23()`: Where `mediaCrypto` is reconfigured based
on `sourceDrmSession` and `codecDrmSession` is also updated to
`sourceDrmSession`.
* `resetCodecStateForFlush()`: Where (before this change) the action
is unconditionally set back to `DRAIN_ACTION_NONE` and so any
required updated implied by
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` is not done.
This change ensures that `flushOrReleaseCodec()` handles
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` before calling .
This probably also resolves Issue: google/ExoPlayer#10274
#minor-release
PiperOrigin-RevId: 454114428
Based on
https://developer.android.com/reference/android/media/MediaCodec#using-an-output-surface,
frame dropping behaviour depends on the target SDK version.
After this change transformer will only use
MediaFormat#KEY_ALLOW_FRAME_DROP if both the target and system SDK
version are at least 29 and default to its pre 29 behaviour where each
decoder output frame must be processed before a new one is rendered
to prevent frame dropping otherwise.
Also remove deprecated Transformer.Builder constructor without a
context and the context setter.
PiperOrigin-RevId: 453971097
The track selector will select multi-channel formats when those can be
spatialized, otherwise the selector will prefer stereo/mono audio
tracks. When the device supports audio spatialization (Android 12L+),
the DefaultTrackSelector will monitor for changes in the platform
Spatializer and trigger a new track selection upon a
Spatializer change event.
Devices with a `television` UI mode are excluded from audio channel
count constraints.
#minor-release
PiperOrigin-RevId: 453957269
(cherry picked from commit e2f0fd7673)
Some Player implementations have no playlist capability but can still
set a MediaItem for playback. Examples are a MediaController connected
to a legacy MediaSession, ExoPlayer up to 2.12 or MediaPlayer.
To indicate this capability, we need an allowed command in addition
to COMMAND_CHANGE_MEDIA_ITEMS that just allows to set a single item
that replaces everything that is currently played.
#minor-release
PiperOrigin-RevId: 453879626
(cherry picked from commit 5333c67d08)
With HLS chunkless preparation, audio formats may have no value
for channel count. In this case, the DefaultAudioSink will either query
the platform for a supported channel count (API 29+) or assume a max
channel count based on the encoding spec in order to decide whether the
audio format can be played with audio passthrough.
Issue: google/ExoPlayer#10204
#minor-release
PiperOrigin-RevId: 453644548
(cherry picked from commit 8697338233)
These legacy callbacks are currently forwarded to onSetMediaUri which
will be removed in the future.
Also make sure to only call player.prepare/play after the items have
been set.
The calls to onAddQueueItem are also forwarded to onAddMediaItems to
actually allow a session to resolve these items to playable media, which
wasn't possible so far.
PiperOrigin-RevId: 453625204
(cherry picked from commit bd126ec5c5)
The track selector will select multi-channel formats when those can be
spatialized, otherwise the selector will prefer stereo/mono audio
tracks. When the device supports audio spatialization (Android 12L+),
the DefaultTrackSelector will monitor for changes in the platform
Spatializer and trigger a new track selection upon a
Spatializer change event.
Devices with a `television` UI mode are excluded from audio channel
count constraints.
#minor-release
PiperOrigin-RevId: 453957269
Some Player implementations have no playlist capability but can still
set a MediaItem for playback. Examples are a MediaController connected
to a legacy MediaSession, ExoPlayer up to 2.12 or MediaPlayer.
To indicate this capability, we need an allowed command in addition
to COMMAND_CHANGE_MEDIA_ITEMS that just allows to set a single item
that replaces everything that is currently played.
#minor-release
PiperOrigin-RevId: 453879626
With HLS chunkless preparation, audio formats may have no value
for channel count. In this case, the DefaultAudioSink will either query
the platform for a supported channel count (API 29+) or assume a max
channel count based on the encoding spec in order to decide whether the
audio format can be played with audio passthrough.
Issue: google/ExoPlayer#10204
#minor-release
PiperOrigin-RevId: 453644548
These legacy callbacks are currently forwarded to onSetMediaUri which
will be removed in the future.
Also make sure to only call player.prepare/play after the items have
been set.
The calls to onAddQueueItem are also forwarded to onAddMediaItems to
actually allow a session to resolve these items to playable media, which
wasn't possible so far.
PiperOrigin-RevId: 453625204
We generally nest the `Builder` for `Foo` inside `Foo`. In this case,
there's already a `DefaultTrackSelector.Parameters.Builder` type visible
to a developer, it just happens to be the 'common'
`TrackSelectorParameters.Builder`, so using it is a bit weird. For
example this code snippet doesn't compile because
`DefaultTrackSelector.Parameters.Builder#build()` returns
`TrackSelectionParameters`. This CL fixes that problem and the code
snippet now compiles.
```java
DefaultTrackSelector.Parameters params =
new DefaultTrackSelector.Parameters.Builder(context).build()
```
#minor-release
PiperOrigin-RevId: 453215702
(cherry picked from commit 247c2d845d)
We generally nest the `Builder` for `Foo` inside `Foo`. In this case,
there's already a `DefaultTrackSelector.Parameters.Builder` type visible
to a developer, it just happens to be the 'common'
`TrackSelectorParameters.Builder`, so using it is a bit weird. For
example this code snippet doesn't compile because
`DefaultTrackSelector.Parameters.Builder#build()` returns
`TrackSelectionParameters`. This CL fixes that problem and the code
snippet now compiles.
```java
DefaultTrackSelector.Parameters params =
new DefaultTrackSelector.Parameters.Builder(context).build()
```
#minor-release
PiperOrigin-RevId: 453215702
