Mp4Muxer already supports writing Mp4LocationData so added that
as supported Metadata entry.
Support for more Metadata entries will be added in upcoming CLs.
PiperOrigin-RevId: 534473866
Earlier metadata was written multiple times as it came.
With new changes, all the distinct metadata entries will
get collected and will be written at once in the end.
PiperOrigin-RevId: 534088401
Docs:
* https://developer.android.com/build/publish-library/configure-pub-variants#single-pub-var
* https://developer.android.com/reference/tools/gradle-api/8.0/com/android/build/api/dsl/PublishingOptions
This resolves the following warning from Android Gradle Plugin 7.2.2 and
helps unblock the upgrade to AGP 8.0.1:
> Software Components will not be created automatically for Maven
> publishing from Android Gradle Plugin 8.0. To opt-in to the future
> behavior, set the Gradle property
> `android.disableAutomaticComponentCreation=true` in the
> `gradle.properties` file or use the new publishing DSL.
>
> Affected Modules: `lib-cast`, `lib-common`, `lib-container`,
> `lib-database`, `lib-datasource`, `lib-datasource-cronet`,
> `lib-datasource-okhttp`, `lib-datasource-rtmp`, `lib-decoder`,
> `lib-effect`, `lib-exoplayer`, `lib-exoplayer-all (legacy)`,
> `lib-exoplayer-dash`, `lib-exoplayer-hls`, `lib-exoplayer-ima`,
> `lib-exoplayer-rtsp`, `lib-exoplayer-smoothstreaming`,
> `lib-exoplayer-workmanager`, `lib-extractor`, `lib-media2 (legacy)`,
> `lib-mediasession (legacy)`, `lib-muxer`, `lib-session`,
> `lib-transformer`, `lib-ui`, `lib-ui-leanback`, `test-utils`,
> `test-utils-robolectric`
Issue: androidx/media#409
PiperOrigin-RevId: 533464133
This is a pre-requisite for the Android Studio upgrade assistant to
upgrade from AGP 7.2.2 to 8.0.1, otherwise it fails and complains
this is missing.
Issue: androidx/media#409
PiperOrigin-RevId: 533463246
This is blocking the upgrade to AGP 8.0.1. The Android Studio Upgrade
Assistant refuses to run with the error:
> Modules have the same package for their `main` and `androidTest`
> artifacts
>
> The package specifications in `AndroidManifest.xml` files define the
> same package for the `main` and `androidTest` artifacts, in the
> following modules: `effect`, `muxer`, `transformer`,
`test_exoplayer_abr`, `test_exoplayer_performance`, and `container`.
This change also adds the `.test` suffix to `test/AndroidManifest.xml`
files where it's missing, because although it's not mentioned in the
Upgrade Assistant error it does cause problems later.
```
> Incorrect package="androidx.media3.database" found in source AndroidManifest.xml: libraries/database/src/test/AndroidManifest.xml.
Setting the namespace via the package attribute in the source AndroidManifest.xml is no longer supported.
Recommendation: remove package="androidx.media3.database" from the source AndroidManifest.xml: libraries/database/src/test/AndroidManifest.xml.
```
Issue: androidx/media#409
PiperOrigin-RevId: 533460180
This allows us to avoid needing a reference to the VideoFrameProcessor, which
can be especially difficult if an App only has a reference to the
VideoFrameProcessor.Factory it passes into Transformer/ExoPlayer.
PiperOrigin-RevId: 533205983
This device failed on HdrEditingTest's exportAndTranscode_hlg10File_whenHdrEditingUnsupported_toneMapsOrThrows
before this CL, and succeeds on that test after this CL.
PiperOrigin-RevId: 532796897
This is a failure only in SSIM, so it seems unlikely we'll prioritize this over
other work or bugs soon. Suppress test failures to reduce triage burden.
PiperOrigin-RevId: 532200729
Allow the VideoFrameProcessor to output multiple textures at a time, so that
lifetime of textures is up to the consumer calling VFP.releaseOutputFrame.
The FinalShaderProgramWrapper also has a new maxCapacity limit added, to ensure
the a reasonable amount of textures is used and avoid using up memory.
PiperOrigin-RevId: 532094256
In the past, the SequenceAssetLoader was released in TransformerInternal
when the export ended.
fc539da061 was made to release the SequenceAssetLoader earlier, when
loading ended. This was causing player release timeouts because the last
AssetLoader in the sequence was released before the SamplePipelines (see
0b40bc37ab for more information).
The code that was releasing the SequenceAssetLoader was first commented
out because we didn't have an understanding of what was happening.
This change removes the early SequenceAssetLoader release all together.
It doesn't have any effect as this code was already commented out.
PiperOrigin-RevId: 532065673
*** Original commit ***
Rollback of 65d5132f76
*** Original commit ***
Create InAppMuxer in transformer
To use the InAppMuxer, the client needs to pass InAppMuxer Factory.
***
***
PiperOrigin-RevId: 531470081
The texture input tests in TransformerEndToEndTest were not passing on
Pixel 7. Implemented a fix and fixed other minor threading issues I
spotted while looking at the code.
PiperOrigin-RevId: 531141659
*** Original commit ***
Create InAppMuxer in transformer
To use the InAppMuxer, the client needs to pass InAppMuxer Factory.
***
PiperOrigin-RevId: 531056436
Tone-mapping an HDR video with MediaCodec on sm-s908u1 was timing out.
The reason for that is that the decoder was dropping frames, and the
ExternalTextureManager was therefore never propagating the end-of-stream
signal.
There was already a workaround for a similar issue but restricted to
sm-f936b. Removed the model check as the bug is probably present on more
devices.
PiperOrigin-RevId: 530639437
Exceptions thrown when switching AssetLoader were not reported through
the error listener. Therefore, the resources were not released and the
export was not ending.
PiperOrigin-RevId: 530626300
If tone-mapping was requested for a device supporting HDR encoding,
isToneMapped was false in VideoSamplePipeline.EncoderWrapper. This was
causing the encoder to expect HDR.
Also did some renamings to improve readability
PiperOrigin-RevId: 530584010
similar error to 9baa6f6be5L `registerInputStream` sets the textureManager, so reordering makes sure the textureManager is set before you set the frame info. This is important for texture input, where the frame info provides the width and height.
PiperOrigin-RevId: 530579584
When we created androidTests, in the past, they always had a URI pointing to a resource, therefore we always had a URI scheme. With texture input, this will not longer be the case (EditedMediaItems's may have URI.EMPTY, which have a null scheme) so we need to check for this so tests don't falsely fail.
PiperOrigin-RevId: 528848411
renderOutputFrame actually renders frames to an output surface. We'll soon have
a releaseOutputFrame method, that would release resources associated with an
output time, so rename this to disambiguate the two methods.
Also rename onOutputFrameAvailable to onOutputFrameAvailableForRendering, to
make it clear this is not available for "release"
This change should be a renaming-only change and have no functional differences.
PiperOrigin-RevId: 527844947
Add `VideoFrameProcessor.registerInputStream()` to signal a new type of input.
And `InputHandler.signalEndOfCurrentInputStream()` to signal to `InputHandler`
partial input stream completion.
Fully processed means after FinalShaderProgramWrapper releases the last frame.
PiperOrigin-RevId: 527356646
In ASwB, all Transformer tests can be run by right-clicking on the project and
clicking "Run all tests". We cannot, however, select only some specific test
files within a project (ex. all non-analysis tests) to run tests on.
Add @Ignore to analysis tests, which are not intended to be run anyways
when determining whether Transformer is working on some device. These
tests also don't have proper skipping logic when a device doesn't support a
format, so they can't be run effectively on low-end devices anyways.
This eases manual testing, for example when debugging whether tests all pass
on a device.
When analysis tests are desired to be run, it should be easy to comment out
the @Ignore.
PiperOrigin-RevId: 527289600
Allow the VideoFrameProcessor to output to a texture without an output surface.
Tested by updating texture output tests to no longer output to a surface.
PiperOrigin-RevId: 527244605
The only dependencies that are not updated are the ones that need
to be kept in sync with other system (like Android source tree) or
would require a Kotlin dependency in common or exoplayer modules.
As a side effect, some demo apps now need a Kotlin config and some
additional modules require desugaring/multidex logic. To simplify
the setup, the desugaring and multidex steps are added to the common
config.
PiperOrigin-RevId: 527243950
This was only used in EncoderWrapper, so move createSupportedTransformationRequest
from VideoSamplePipeline to EncoderWrapper to reduce its scope.
PiperOrigin-RevId: 527226578
The production code changes are in transformer, but the tests in effect have also been updated to confirm the is no color regression `inputColorInfo.colorTransfer=C.COLOR_TRANSFER_SRGB`
PiperOrigin-RevId: 526950435
Previously, I assumed that SDR contents must be BT709, and HDR contents must be
BT2020. Turns out BT2020 is just wide-gamut, and SDR contents / transfers may be
represented in BT2020 color spaces.
Relax the check, so that we don't throw when valid BT2020 SMPTE 170M contents
are input into effects.
PiperOrigin-RevId: 526668347
Removes glObjectsProvider from `VideoFrameProcessor` and `Effects`. Apps will set the glObjectsProvider on the DefaultVideoFrameProcessor.Factory.Builder when providing a custom DefaultVideoFrameProcessor.Factory, rather than in `Effects`.
PiperOrigin-RevId: 525169059
`findDecoder/EncoderForFormat` seem to be more restrictive than querying
`MediaCodecList` as done for playback, and it's not clear that the cases where
no codec is found correspond to actual cases that would fail given that it
seems this returns an empty string for many cases in production.
Switch to using `MediaCodecUtil` and `EncoderUtil` for querying codecs instead.
PiperOrigin-RevId: 525078321
MediaMuxer does not support out-of-order video frames API 25. Use
a test file with frames in order in
loopingTranscodedAudio_producesExpectedResult. This is necessary for
tests that transmux video samples.
PiperOrigin-RevId: 524309318
A passthrough effect allows for testing having an intermediate
effect injected, which uses different OpenGL shaders from having no
effects.
PiperOrigin-RevId: 524276991
Previously `ChannelMixingAudioProcessor` output float because it was
implemented using the audio mixer's float mixing support.
Move the implementation over to just using the `ChannelMixingMatrix` and make
it publicly visible in the common module so it can be used by apps for both
playback and export.
Also resolve a TODO that no longer had a bug attached by implementing support
for putting multiple mixing matrices to handle different input audio channel
counts, and fix some nits in the test code.
Tested via unit tests and manually configuring a `ChannelMixingAudioProcessor`
in the transformer demo app and playing an audio stream that identifies
channels, and verifying that they are remapped as expected.
PiperOrigin-RevId: 523653901
Simplify the audio encoder input timestamp calculation. The new calculation
avoids drifting by tracking the total number of bytes encoded rather than
tracking the timestamp and remainder separately, and also makes the timestamps
match the decoder output buffer timestamps.
Also switch one of the export tests that was passing through AMR samples over
to using WAVE audio. The problem with using AMR is that the compressed samples
are not necessarily an integer number of audio frames and the shadow decoder
would pass them from input to output, so the audio encoder was receiving
non-integer numbers of audio frames.
Tested by logging the timestamps at the decoder output and encoder input with
forcing transcoding audio, and verifying that after this change the audio
timestamps are no longer off by one.
PiperOrigin-RevId: 523409869
The video asset loader renders decoder output to a surface texture, and if the
video sample pipeline is in the process of updating the surface texture image
at the moment when the asset loader video decoder is released this seems to
cause `MediaCodec.release` to get stuck.
Swap the release order so that we stop updating the texture before trying to
release the codec.
PiperOrigin-RevId: 523401619
Log at debug level immediately when MediaCodec throws. This logging will be
output closer to the time when the error actually happened so should make it
easier to identify the order of components failing.
Downgrade logging of errors after export ends to warning level, as output may
still be fine if there was a problem after exporting completed (though it's
still worth logging a warning as the device may not be in a good state).
PiperOrigin-RevId: 523370457
Before this CL, SurfaceTexture.onFrameAvailable was used to tell whether a frame
was available in the VideoFrameProcessor's output texture. This was incorrect, as
it would rely on having the texture be written to before the
SurfaceTexture.onFrameAvailableListener is invoked, leading to null-pointer-
exceptions on timeouts.
Instead of using DefaultVideoFrameProcessor different interfaces to set that we
want to output to a texture, and get that output texture, use one interface that
sets a listener, and renders to a texture iff that listener is set. As this
listener is executed on the GL thread, this also allows us to no longer need to
expand visibility for the GL task executor and tasks.
PiperOrigin-RevId: 522362101
Handling of the stream offset and start position was unnecessarily
complex and even incorrect. It was going to be an issue for
concatenation of video and image input.
The stream offset is the offset added before decoding/encoding to
make sure it doesn’t fail in case of negative timestamps (which do
rarely occur).
The start position is equal to the stream offset, plus the clipping
start time if the media is clipped.
Before this change:
- Samples were offset by the start position before decoding, and this
offset was removed before muxing.
- The startPosition of the first MediaItem in a sequence was used for
all the MediaItems in this sequence (which is incorrect).
- The stream offset was removed before applying the GL effects and
added back before encoding so that it was not visible to the OpenGL
processing.
After this change:
- The start position is subtracted in the AssetLoader, so that the
downstream components don’t have to deal with the stream offsets and
start positions.
- Decoded samples with negative timestamps are not passed to the
SamplePipelines. The MediaMuxer doesn’t handle negative timestamps
well. If a stream is 10 secondes long and starts at timestamp -2
seconds, the output will only contain the samples corresponding to the
first 8 (10 - 2) seconds. It won’t contain the last 2 seconds of the
stream. It seems acceptable to remove the first 2 seconds instead.
PiperOrigin-RevId: 520916464
Releasing the player once a sequence has ended seems to make our
emulator tests flaky. Comment out until we find the cause. The player
will still be released from TransformerInternal, when the export ends.
PiperOrigin-RevId: 520886181
Also fixed the javadoc link in devsite and removed javadoc links from decoder extensions as it is not published yet on developer.android.com.
#minor-release
PiperOrigin-RevId: 520636868
*** Original commit ***
Rollback of fc539da061
*** Original commit ***
Release SequenceAssetLoader when ended
Before, the SequenceAssetLoader was released at the end of the export.
Release resources earlier if possible.
***
***
PiperOrigin-RevId: 520036433
*** Original commit ***
Release SequenceAssetLoader when ended
Before, the SequenceAssetLoader was released at the end of the export.
Release resources earlier if possible.
***
PiperOrigin-RevId: 519993003
Previously, we always used ImageReader to read from the output of DefaultVideoFrameProcessor, for pixel tests. This has a limitation of not being
able to read HDR contents, so that we couldn't support HDR pixel tests.
Reading from a texture allows us to use glReadPixels to read from
DefaultVideoFrameProcessor, and build upon this to implement HDR pixel tests. We do
still want tests for surface output though, because real use-cases only will output
to Surfaces.
Also, add some tests for outputting to textures, since this test infrastructure is
a bit complex.
PiperOrigin-RevId: 519786535
The failure reason (no network) will be logged in the test output, but the test will not be marked as failing, rather skipped.
PiperOrigin-RevId: 518262203
This was trimmed using the Transformer Demo, from ~4 seconds to 300ms
Otherwise, this test file will be quite large, and folks who clone the repo will
have to clone this content as well. Trimming the file also allows the test to
take less time, while still testing the core purpose of the file, to confirm that 4k extraction/decode/GL/encode/muxing works.
PiperOrigin-RevId: 517408463
This test file used to be remote, which led to various errors in loading the file or timing out during the muxer or overall transformer.
export4k60 test timing on Pixel 7:
|Condition |elapsedTimeMs|AS Test "Duration" (s)|
|--------------------------|-------------|----------------------|
|local file (this CL) |4253 |14 |
|Remote file, googleguest |5510 |17 |
|Remote file, 4G |11423 |25 |
PiperOrigin-RevId: 516815462
- To support looping EditedMediaItemSequences, we need a way to tell the
AssetLoader that a sample couldn't be consumed and that it should retry
later. This is necessary in case we don't know yet whether the looping
sequence should load more samples because the other sequences haven't
made sufficient progress yet.
- The decision on whether to consume a sample is based on its timestamp
so it needs to be available.
PiperOrigin-RevId: 516546026
This test is not run on emulator, triage or postsubmit, and does not
provide value to the library in it's current state. It could be
deleted, however it still may have use for analysis of exported files
on MH.
PiperOrigin-RevId: 516491160
Split test/ TransformerEndToEndTest into SingleMediaItemEndToEndTest and
SingleSequenceEndToEndTest to reduce the file size and split the tests
by category.
PiperOrigin-RevId: 515039502
Callbacks onTrackCount and onTrackAdded can be called simultaneously
from different threads.
Before this fix, it was possible for the MuxerWrapper and
FallbackListener track count to never be set, or to be set
with incorrect values.
PiperOrigin-RevId: 514779719
- This is to make sure we know about all the tracks before initializing
the SamplePipelines. This allows to set the muxer and the fallback
listener track count before the SamplePipelines are built.
- As a result, the test files had to be updated because the order in
which the tracks are written has changed.
- The ImageAssetLoader also had to be updated to call onOutputFormat
repeatedly until it returns a non-null SampleConsumer.
- Also fix the trackCount sent to the muxer and fallback listener. The
correct track count can be computed now that we know about all the
tracks before building the SamplePipelines.
PiperOrigin-RevId: 514426123
All audio tracks should either all be transcoded or all be transmuxed.
Same for video tracks.
To achieve this, simplify the behaviour of transmuxAudio/Video.
PiperOrigin-RevId: 513809287
If the Metadata passed to SegmentSpeedProvider is null, then the
SegmentSpeedProvider will always return 1f from getSpeed.
Initializing a SpeedChangingAudioProcessor requires a SpeedProvider.
Once configured,this audioProcessor is always active, so buffers are
passed through it. Because getSpeed is always 1, the processor performs
a no-op, but still has to do a buffer copy for each buffer.
By not initializing the audio processor when metadata is null, this
copy can be skipped and the audio pipeline is more performant.
Note: This change does not affect the multiple media-item case, which
is not supported with speed changes, as per Transformer API
documentation.
PiperOrigin-RevId: 513261811
We shouldn't have this logging unless we really need it to debug
a specific problem, as it can be noisy (even at debug level).
PiperOrigin-RevId: 512904412
Uses the first mediaItem's format as the output format.
If there is `Presentation` supplied in the `Composition.effects`, add it as the
last effect of the first EditedMediaItem.
PiperOrigin-RevId: 512082659
Add format codec info, which can make test skipping checks more similar to the
actual Transformer decoder checks.
Also for the test file, the actual format was 720p, but somehow the file name and
media metadata indicated 1080p. This format mismatch led to some decoding errors,
so fix the format (and associated errors). This also allows us to remove the
exception catch in ForceInterpretHdrVideoAsSdrTest, which was included due to
errors from the incorrect format.
PiperOrigin-RevId: 511809507
- Split the transmux setting into transmuxAudio and transmuxVideo. This
is more flexible for apps and will also be useful for unit testing
(particularly as we can't test video transcoding on Robolectric at the
moment).
- Move these settings to Composition. It makes sense for these settings
to be next to forceAudioTrack. Apps may also want to set these
settings based on the current Composition's MediaItems.
- Add a Composition.Builder because Composition now contains a few
optional fields.
PiperOrigin-RevId: 511708618
Logcat had the following lines, with no other information.
```
DefaultEncoderFactory: Encoders removed for resolution:
DefaultEncoderFactory: Encoders removed for bitrate:
DefaultEncoderFactory: Encoders removed for bitrate mode:
```
PiperOrigin-RevId: 511470231
Implement getMediaFormatInteger, a helper method simulating mediaformat.getInteger(name, defaultValue).
This reduces the API 29 restriction from MediaFormatUtil.getColorInfo to API 24, in
particular removing the method-based restriction to a constant-based restriction,
so that we can reduce usage of the API 29 class.
This also allows us to slightly simplify prior use-cases where we'd check
containsKey and getInteger to have a default value.
PiperOrigin-RevId: 511184301
When clipping a MediaItem with start time > 0, the audio was ending
before the video. This is because:
- Audio timestamps are computed based on the sample sizes, with a start
time set to streamOffsetUs (i.e. the streamStartPositionUs is not
taken into account).
- The SamplePipeline was subtracting streamStartPositionUs from the
timestamps before sending the samples to the muxer.
- As a result, the audio timestamps were shifted by
streamStartPositionUs, while they should be shifter by streamOffsetUs.
PiperOrigin-RevId: 511175923
* Account for `AssetLoader` output types.
* Consider cases that are not audio/video specific.
* Use `Format#sampleMimeType` for track specific conditions to check.
* Untangle `SamplePipeline` initilization from `AssetLoader` state.
PiperOrigin-RevId: 511020865
- Add silent audio when the output contains an audio track but the
current MediaItem doesn't have any audio.
- Add an audio track when generateSilentAudio is set to true.
PiperOrigin-RevId: 511005887
Previously, this was limited to API 29. Expand this to all API versions.
Also, update the test to:
(1) skip based on SDR format input instead of HDR format input
(2) Check the exception message in order to disambiguate between the decoder tone
mapping error, and general video format support error.
PiperOrigin-RevId: 511002218
Unstuck the muxer if the next timestamp in the track with the minimum
timestamp is larger than this minimum timestamp plus
MAX_TRACK_WRITE_AHEAD_US.
PiperOrigin-RevId: 510977088
Before, if the upstream AssetLoader provides HDR to the VideoSamplePipeline when
HDR_MODE_EXPERIMENTAL_FORCE_INTERPRET_HDR_AS_SDR is requested, the
VideoSamplePipeline would attempt to tell the AssetLoader to output SDR, which
could be accomplished via MediaCodec tone-mapping in the AssetLoader.
However, this makes an assumption of the AssetLoader implementation, and
AssetLoaders may not all implement support for decoder tone-mapping. Remove javadoc
attempting to explain how AssetLoaders (ex. custom ones) could behave.
PiperOrigin-RevId: 510956820
This method uses sampleRate, channelCount and pcmEncoding, so passing
AudioFormat is easier.
This will lead into a future change that builds the
encoderInputAudioFormat from encoder.getConfigurationFormat()
PiperOrigin-RevId: 510956177
Rename ScaleToFitTransformation to ScaleAndRotateTransformation.
This better represents the operations that can be accomplished using this
effect. The name was originally named ScaleToFit* because it's not obvious how
to scale to fit using OpenGL, and this effect handled the scaling to fit in a way that no other MatrixTransformations did.
However, it's hard to discover how to rotate when skimming names of effects, so
it's probably more useful to convey that this effect rotates, than that it
scales to fit.
PiperOrigin-RevId: 510480078
Format.toString unfortunately doesn't log colorInfo, and as Format holds a very
large set of values, it's unclear that it should. ColorInfo is useful for codec
exceptions though, so log this in ExportException.createForCodec.
PiperOrigin-RevId: 510475520
Otherwise, a lack of HDR decoding support will result in the tests checking output files for HDR output, like HdrEditingTest.transform_noRequestedTranscode_hdr10File_transformsOrThrows, failing.
PiperOrigin-RevId: 510213020
This allows us to fix usage of HDR_MODE_EXPERIMENTAL_FORCE_INTERPRET_HDR_AS_SDR.
Before, this was checked in the VideoSamplePipeline, which no longer decides on the decoder configuration input format.
PiperOrigin-RevId: 510142097
Some of the test methods in `TransformationTest` don't check
capabilities. Add a check just scoped to decoding (not checking
encoding, but the default encoder factory may fall back).
PiperOrigin-RevId: 510088562
* Moved the logic to SamplePipeline.
* Pass the requested values via Format.
* Moved exception throwing inside the methods.
* Build up the mimeTypesToCheck as a set - removing possible duplicate
checks.
* Simplified logic that calls the findSupportedMimeType method.
* Improved javadoc.
PiperOrigin-RevId: 509594062
It may be confusing for 3P apps, for us to have separate error codes for (1) if
encoding HDR is not supported at all by the device, and (2) if encoding the
format, which happens to be HDR, is not supported by the device. Instead, we can
communicate this in the error message.
PiperOrigin-RevId: 509188666
- For single-asset, the behavior stays the same. Transcode if and only
if it's necessary,
- For constrained multi-asset, always transcode, except if the setter to
transmux is set. This is to avoid failing if a MediaItem that doesn't
require transcoding is followed by a MediaItem that does require
transcoding.
PiperOrigin-RevId: 508097798
It doesn't actually make sense for them to be placed in the Transformer, because the error's root causes are actually only in codecs. Also, a few codec errors were
repeated, so deduplicate these instances
PiperOrigin-RevId: 506937695
Based on [this conversation thread](https://chat.google.com/room/AAAA--f88ao/76Rem_cRCK8), I've opted to update the existing FrameProcessor.create() rather than deprecate it, as it is unlikely to be in use by apps outside google3.
PiperOrigin-RevId: 506920930
* Overload added `(cause, errorCode, isVideo, isDecoder, details)`,
where `details` is a string of values to be added to the error message
of the `TransformationException`.
* Overload with `MediaFormat` and `mediaCodecName` moved to
`DefaultCodec`, because all usages of that overload were from
`DefaultCodec`, and this allows a simplified API because of internally
stored values.
* `mediaCodecName` removed from overload that takes a `Format`.
* Reordered `createForCodec` parameters.
PiperOrigin-RevId: 506895268
In encoding small and odd-numbered resolutions, like `316x61` ([this image](https://upload.wikimedia.org/wikipedia/commons/6/65/100winners.png)), the current fallback logic prefers a software encoder to hardware ones. The assumption was, the encoder factory applies the encoder size alignment and changes the resolution to `316x60` for SW encoders and `316x64` for HW ones. SW encoders is selected because the supported resolution 60 is closer to requested 61, than the hardware supported 64.
This change changes the default encoder selection process to only expose hardware encoders if there is any.
PiperOrigin-RevId: 506879983
With multi-asset, the sample pipelines can process more than one
MediaItem. The renaming makes it clear that the format passed to the
SamplePipeline constructors is the one corresponding to the first
MediaItem. Indeed, the first format is the one used to configure the
SamplePipelines.
PiperOrigin-RevId: 506879260
