The existing `Subtitle` handling code is left intact to support the
legacy post-`SampleQueue` decoding path for now.
This also includes full support for merging overlapping `CuesWithTiming`
instances, which explains the test dump file changes, and which should
resolve the following issues (if used with the
decoder-before-`SampleQueue` subtitle logic added in
5d453fcf37):
* Issue: google/ExoPlayer#10295
* Issue: google/ExoPlayer#4794
It should also help resolve Issue: androidx/media#288, but that will also require
some changes in the DASH module to enable pre-`SampleQueue` subtitle
parsing (which should happen soon).
#minor-release
PiperOrigin-RevId: 571021417
The aim of this test is to make sure the image is onscreen for the right amount of time, so to drive down flakes from the decoder taking too long, change this to an atLeast check
#minor-release
PiperOrigin-RevId: 570988044
This gets rid of the reliance on the decode only flag that is still
set on input buffers to the decoder if they are less than the start
time.
We still need to set and check the decode-only flag in SimpleDecoder
to ensure compatbility with custom decoders that use the flag while
it's not fully removed.
PiperOrigin-RevId: 570736692
The interface requires the implementation to return null if the
decode-only flag is set. So instead of setting the flag and returning
null, we can simply not call the method and assume it's null.
The only reason where this wouldn't work is if the metadata format
has keyframe-like logic and requires previous metadata to decode
the next one. This is not something we came across before and it seems
ignorable. If that feature is needed in the future, we should instead
add a method to MetadataDecoder to set the first output timestamp.
#minor-release
PiperOrigin-RevId: 570399838
While sleeping for offload, position is estimated based on time playing. If asleep and AudioTrack is reused, then the position will keep incrementing as the subsequent item plays. That is until wakeup when playing position is updated to the timestamp of the second item. Offload scheduling should be disabled until track transitions fully.
PiperOrigin-RevId: 570397140
When seeking, we must first flush the video sink so it stops
using any SurfaceTextures before flushing MediaCodec.
#minor-release
PiperOrigin-RevId: 570015998
It seems likely we will define a new "image decoder" interface that
returns `ListenableFuture<Bitmap>`, and naming that will be
hard/annoying if we need to keep this interface working too.
It's also not really clear what a non-test implementation of this
interface would be expected to do, since `DefaultImageDecoder` is
documented to always decode using `BitmapFactory`.
#minor-release
PiperOrigin-RevId: 569206325
Changes
---
- Added `removeOfflineLicense(byte[])` and `getOfflineLicenseKeySetIds` and consumed them in their implementations
Background
---
- These APIs will help in addressing an increasing amount of `java.lang.IllegalArgumentException: Failed to restore keys: BAD_VALUE` which is our top playback error in our app
- Based on our discussion with Widevine team and [this exoplayer issue](https://github.com/google/ExoPlayer/issues/11202#issuecomment-1708792594)
- TL;DR: The failure occurs on startup if the user has 200+ offline licenses, we would like to add the functionality to remove offline licenses
**Note: Why we want these APIs in ExoMediaDrm and not in OfflineLicenseHelper**
- As per the issue above, we would like to access these 2 public APIs in MediaDrm that don’t exist in `OfflineLicenseHelper` or `ExoMediaDrm`
- APIs interested in:
- [MediaDrm#removeOfflineLicense()](https://developer.android.com/reference/android/media/MediaDrm#removeOfflineLicense(byte%5B%5D)): To remove offline license
- [MediaDrm#getOfflineLicenseKeySetIds()](https://developer.android.com/reference/android/media/MediaDrm#getOfflineLicenseKeySetIds()): To see number of offline licenses on startup
- We use `OfflineLicenseHelper` to download license for L1 and we don't interact with `ExoMediaDrm` directly. But for the alternate Widevine integration, we directly depend on `ExoMediaDrm` APIs to override and call CDM Native APIs.
- We would like to have the functionality of removing offline licenses for both integration which would need access to above APIs in `ExoMediaDrm`.
Links
---
- https://github.com/androidx/media/issues/659
MediaCodecRenderer has already been updated to not rely on the
input stream to mark its samples as decode-only and instead use
a simple time-based comparison to achieve the same effect.
This change makes the same update for all other renderers that
either use the flag directly or forward to a "decoder" instance.
PiperOrigin-RevId: 568232212
The current code only set the videoEffects when CVSP is initialized, which
happens after `player.prepare()`. But it's valid that videoEffects are set
before calling `prepare()`.
PiperOrigin-RevId: 566941216
Move audio offload mode related interfaces and definitions from `TrackSelectionParameters` to a new `AudioOffloadModePreferences` class.
PiperOrigin-RevId: 566905017
This change uses the new incremental overloads of `SubtitleParser` to
avoid introducing the performance regression caused by the original
change requiring all cues to be fully parsed before the first could be
shown on screen.
`TtmlDecoder` which used to be `SimpleSubtitleDecoder` will now be
called `TtmlParser` and implement `SubtitleParser` interface. For
backwards compatibility, we will have the same functionality provided
by `DelegatingSubtitleDecoder` backed-up by a new `TtmlParser`
instance.
PiperOrigin-RevId: 566671398
This change introduces two new types of method to `SubtitleParser`:
1. `parse()` methods that take a `Consumer<CuesWithTiming>` and return `void`
2. `parseToLegacySubtitle` method that returns `Subtitle`
(1) ensures that in the new 'parse before SampleQueue' world we can
write cues to the `SampleQueue` as soon as they're ready - this is
especially important when parsing monolithic text files, e.g. for a
whole movie.
(2) ensures that during the transition, the legacy 'parse after
SampleQueue' behaviour doesn't see any regressions in 'time to first
cue being shown'. Previously we had a single implementation to convert
from `List<CuesWithTiming>` to `Subtitle`, but this relies on the
complete list of cues being available, which can take a long time for
large files in some formats (with ExoPlayer's current parsing logic).
By allowing implementations to customise the way they create a
`Subtitle`, we can directly re-use the existing logic, so that the
'time to first cue being shown' should stay the same.
This change migrates all **usages** to the new methods, but doesn't
migrate any **implementations**. I will migrate the implementations in
follow-up CLs before deleting the old list-returning `parse()` methods.
PiperOrigin-RevId: 565057945
Removed `ExoPlayer.experimentalSetOffloadSchedulingEnabled` as scheduling will be enabled by default when offload is enabled for audio-only playback.
In addition, the `experimental` key word was taken out of the following
method signatures:
* `ExoPlayer.experimentalIsSleepingForOffload`
* `AudioOffloadListener.onExperimentalSleepingForOffloadChanged`
* `AudioOffloadListener.onExperimentalOffloadedPlayback`
PiperOrigin-RevId: 565035289
There is no known use case left that needs to be solved by this
class. All other use cases are better solved by alternative
approaches (Player playlist methods or ConcatenatingMediaSource2).
PiperOrigin-RevId: 563713384
The class currently disallows offsets of periods in their windows
except for the very first window. This is not necessary because
we can use TimeOffsetMediaPeriod to eliminate the offset if needed.
This makes the class more useful for many use cases, in particular
for using it with ClippingMediaSource.
Issue: google/ExoPlayer#11226
PiperOrigin-RevId: 563702120
This callback asks to correct the media time in a composition, but doesn't
provide the MediaPeriodId as the necessary context to do this.
PiperOrigin-RevId: 563699344
We have an existing logic for recovering the `AudioTrack` from the [ERROR_DEAD_OBJECT](https://developer.android.com/reference/android/media/AudioTrack#ERROR_DEAD_OBJECT)
throws. However, this only applies to the situation when the
`writtenEncodedFrames > 0`.
However, we have a case when `ERROR_DEAD_OBJECT` throws while writing
PCM data. When the `tunneling` is turned on, the `AudioTrack` is set the
flag `AUDIO_OUTPUT_FLAG_HW_AV_SYNC`, and further because of this flag,
it is forced the flag `AUDIO_OUTPUT_FLAG_DIRECT`. When the platform
invalidates the `AudioTrack`, the `AudioTrack` won't be restored by the
platform due to `AUDIO_OUTPUT_FLAG_DIRECT` flag, and `ERROR_DEAD_OBJECT`
is thrown.
Issue: androidx/media#431
PiperOrigin-RevId: 562582451
This is so CompositionPlayer can customize the Renderers and figure
out when a transition to a MediaItem is made hence it can configure the
effects pipeline with the effects that are specific to the MediaItem.
PiperOrigin-RevId: 562530774
Created new method `AudioSink#setOffloadDelayPadding` that will set delay and padding data onto an `AudioTrack` using `AudioTrack#setOffloadDelayPadding`. This feature adds support for offloaded, gapless Opus playback as the content requires the capability to set padding data post-`AudioSink#configure`.
PiperOrigin-RevId: 562518193
also improves tests to hash bitmap now that we know the bitmaps are decoded in roboelectic tests,
as well as some minor fixes in the DefaultImageDecoder
PiperOrigin-RevId: 561946073
This wasn't properly documented yet (unlike the longer setMediaItems
method that already includes this documentation).
Issue: androidx/media#607
PiperOrigin-RevId: 561910073
Currently, we only support sending Common Media Client Data (CMCD) data through custom HTTP request headers, added capability to configure and transmit it as HTTP query parameters.
PiperOrigin-RevId: 561591246
At this stage, the image renderer is designed to be able to render one input stream containing one sample. The renderer supports seeking inside that stream, which is a no-op because the stream comprises for exactly one sample.
PiperOrigin-RevId: 561307859
If the loading thread of the second media item progresses slow, then when the playback of the first item approaches to the end before the second item is prepared, the stream will be set "final" and the renderers are disabled during such transition. In this case, `AudioSink.handleDiscontinuity` never gets called, which introduces the flakiness into the `test_bypassOffThenOn`.
Similarly for `test_subtitle`, if the loading thread of extracting the subtitle is slow, then when the renderer attempts to queue the input buffer, the data hasn't been available in the stream. And when the extracting finished, the renderer already advanced to the time after the subtitle end time.
To de-flake the tests, we have to make sure that the period of the second item has fully loaded before starting the playback.
PiperOrigin-RevId: 560080119
The first call to method `registerInputStream` doesn't block.
Later successive calls to the method blocks until the previous register call
finishes.
PiperOrigin-RevId: 559694490
Replace Queue<Long> with LongArrayQueue which provides queue semantics
for long primitives. LongArrayQueue is forked from IntArrayQueue which
in turn was forked from Androidx CircularIntArray.
IntArrayQueue is deleted and we now use CircularIntArray directly from
Androidx Collection.
PiperOrigin-RevId: 559129744
Based on the Common Media Client Data (CMCD) specification key-value pairs should be sequenced in alphabetical order of the key name in order to reduce the fingerprinting surface exposed by the player.
PiperOrigin-RevId: 558296264
Added more comprehensive Javadoc around setting custom data and verification on key format.
Changed adding custom data as a `String` to `List<String>`. This would enable us to sort all keys to reduce the fingerprinting surface.
PiperOrigin-RevId: 558291240
It was moved there temporarily to support another temporary move
of ExoPlaybackException. See <unknown commit>.
Since then, ExoPlaybackException has been moved back to ExoPlayer
and we can do the same with MediaPeriodId, which only makes sense
in the context of the ExoPlayer module.
PiperOrigin-RevId: 557159381
This aligns the bypass code with the MediaCodec logic to not
use buffer.isDecodeOnly and instead rely on a timestamp
comparison with the last reset time. Overall, the change should
not introduce a functional difference and is covered by existing
end-to-end tests with bypass playbacks.
Splitting bypass batch buffers by decoder-only flag is
technically wrong for formats where not every buffer is a
keyframe, and this change also leaves a TODO to explain this
known shortcoming.
PiperOrigin-RevId: 556800038
The method was recently introduced and only searched for matching
samples up to index==length. However, SampleQueue uses a circular
array to index its data and the search should continue until
relativeStartIndex+length, while also handling the overflow
in the circular array.
The tests for seeking didn't cover these overflow cases yet
because they always started writing data in an empty SampleQueue.
This can be fixed by prewarming the queue with placeholder data
to force using the overflow logic in the various seek methods.
PiperOrigin-RevId: 555963011
Use `C.RATE_UNSET_INT` instead of introducing `Long.MIN_VALUE` as the default value for rate parameters. Modifies default behaviour of the `TrackSelection.getLatestBitrateEstimate()` method and the `measuredThroughputInKbps` parameter in `CmcdHeadersFactory.CmcdRequest`.
PiperOrigin-RevId: 555939420
Optimises the construction of Common Media Client Data (CMCD) headers by eliminating the use of trailing commas. Instead of appending values directly to a StringBuilder, it now adds values to a list and joins them using a comma separator. While the primary focus is on enhancing readability and robustness, it's worth noting that in certain instances, removing usages of `formatInvariant`, there are also performance improvements.
PiperOrigin-RevId: 555911498
This is the first iteration for the CompositingVideoSinkProvider which
is basically a copy of MediaCodecVideoRenderer's
VieoFrameProcessorManager.
The MediaCodecVideoRenderer now instantiates a
CompositingVideoSinkProvider instead of a VieoFrameProcessorManager.
PiperOrigin-RevId: 555903928
This adds an effect to change the speed of the video track. The speed
of the audio track can already be changed using a SonicAudioProcessor.
Issue: androidx/media#559
PiperOrigin-RevId: 555155418
Modifies the `ChunkSource.getNextChunk(long, long, List, ChunkHolder)` method in the `ChunkSource` interface to `ChunkSource.getNextChunk(LoadingInfo, long, List, ChunkHolder)`.
LoadingInfo contains additional parameters, including `playbackRate` and `lastRebufferRealtimeMs` in addition to the existing `playbackPositionUs`. The additional parameters will allow us to pass these information to Common Media Client Data (CMCD) logging.
PiperOrigin-RevId: 555148768
Modifies the `SequenceableLoader.continueLoading(long)` method in the `SequenceableLoader` interface to `SequenceableLoader.continueLoading(LoadingInfo)`.
`LoadingInfo` contains additional parameters, including `playbackSpeed` and `lastRebufferRealtimeMs` in addition to the existing `playbackPositionUs`. The additional parameters will allow us to pass these information to Common Media Client Data (CMCD) logging.
By using the `LoadingInfo` object, we ensure future flexibility to add more fields without causing any breaking changes to the API.
PiperOrigin-RevId: 555123961
`asReadOnlyBuffer` doesn't copy the original byte order but always sets it to big-endian. Replace calls to it with a utility method that manually sets the byte order after creating the read-only copy.
This fixes `TeeAudioProcessor` providing a `ByteBuffer` always in big-endian and hence causing `AudioBufferSink` to read wrong data.
PiperOrigin-RevId: 554861402
This fixes a bug with playing very short audio files, introduced by
fe710871aa
The existing code using floor integer division results in playback never
transitioning to `STATE_ENDED` because at the end of playback for the
short sample clip provided `currentPositionUs=189937`,
`outputSampleRate=16000` and `(189937 * 16000) / 1000000 = 3038.992`,
while `writtenFrames=3039`. This is fixed by using `Util.ceilDivide`
so we return `3039`, which means
`AudioTrackPositionTracker.hasPendingData()` returns `false` (since
`writtenFrames ==
durationUsToFrames(getCurrentPositionUs(/* sourceEnded= */ false))`).
#minor-release
Issue: androidx/media#538
PiperOrigin-RevId: 554481782
If stream is not considered final and `ClippingMediaSource` is read to `endUs`, then `BaseRenderer.readSource` returns `C.RESULT_NOTHING_READ`. In that case, the `lastBufferInStreamPresentationTimeUs` is not set and the last frame is not rendered.
PiperOrigin-RevId: 554418971
This workaround was added for TS streams that do not adjust their
timestamps to start from zero. Over time, the default audio sink
logic has become more robust towards unexpected timestamps and
we no longer need this workaround to jump forward in time.
The workaround also actively caused issues by adjusting the audio
timestamps backwards if the stream starts with large negative
values. See Issue: androidx/media#291. This caused playback to get stuck due
to another bug in the first-frame rendering logic in the video
renderer that is now fixed.
PiperOrigin-RevId: 553493618
This is the same change as 8655429af7, just on the second call site
of readDiscontinuity. The tests didn't cover this case yet because
they never queued more than 2 items in a playlist.
PiperOrigin-RevId: 553485244
setInputFormat calls registerInputStream and will cause VideoFrameProcessor to
reconfigure. We don't need to call it when setting up the VFP
(in `onReadyToInitCodec()`). Rather, we wait until `onOutputFormatChanged()`
called (this output format refers to mediaCodec's outptut format) to register
the input stream.
PiperOrigin-RevId: 553448633
We currently only force the first frame if the frame timestamp is
greater than the stream *offset*.
This is wrong for two reasons:
1. The timestamp and the offset are not comparable and it should be
the stream start position.
2. The check should only be applied at stream transitions where we
need to make sure that a new first frame isn't rendered until we
passed the transition point.
We have to fix both issues together, because fixing just issue (1)
causes seeks to before the start position to no longer render the
frame (and playback will be stuck). A new test covers this case.
We also amend the stream transition test case to actually test what it
promises to test and add a test for prerolling samples at the
beginning, to ensure the first frame is still renderered.
Issue: androidx/media#291
PiperOrigin-RevId: 552858967
We currently use 3 different booleans to track the state of the first
frame rendering, which implies that there are 8 distinct possible
overall states. However, this is actually a staged process and there
are only 3 different overall states in the current code. This means
it's clearer and easier to reason about if the variables are combined
to a single state value. Overall, this should be a complete no-op.
State mapping:
- rFFAReset=false, rFFAEnable=false, mayRenderFFAEINS=false
=> FIRST_FRAME_NOT_RENDERED_ONLY_ALLOWED_IF_STARTED
- rFFAReset=false and/or rFFAEnable=false, mayRenderFFAEINS=any
=> FIRST_FRAME_NOT_RENDERED
- rFFAReset=true, rFFAEnable=true, mayRenderFFAEINS=any
=> FIRST_FRAME_RENDERED
PiperOrigin-RevId: 552857802
Refactored `CmcdLog` to `CmcdHeadersFactory` for improved representation of its purpose and updated implementations.
#minor-change
PiperOrigin-RevId: 552831995
`SubtitleExtractor` used to rely on a `SubtitleDecoder`. However, now all SubtitleDecoders that are used for side-loaded subtitles have been migrated to a `SubtitleParser` interface. We can therefore refactor the extractor.
The `SubtitleExtractor` is only used for side-loaded subtitles which means we do not require the migration of the CEA-608/708 `SubtitleDecoders`.
PiperOrigin-RevId: 552471710
After this change, every queued bitmap is treated as an individual input stream
(like a new MediaItems).
This change merges the FrameDropTest and FrameDropPixelTest into one (while maintaining all the test cases)
- This is accomplished by generating bitmaps with timestamps on it in FrameDropTest and compare them with goldens (one may call this a pixel test, please lmk if you want this to be renamed)
- The most part of the change comes from DefaultVideoFrameProcessorVideoFrameRenderingTest. The overall working is
- We bypass the input manager
- The TestFrameGenerator generates frames based on timestamps. In this case, we generate frames with timestamps on it
- The generated frame is sent to texture output and in turn saved to bitmaps
- We then compare the generated bitmap with the goldens
PiperOrigin-RevId: 551795770
1. For codecs that change timestamps, we need to use greater
or equal instead of just equal for comparison.
2. We should only make this comparison once a value has been
set.
3. The largest queue timestamp isn't updated before using it
for this detection, meaning that we also mark the
second-to-last sample as the last one.
PiperOrigin-RevId: 550901978
We currently pass in the time at which the stream originally started,
but newly enabled renderers should get the current playback position
instead.
PiperOrigin-RevId: 550894630
Instead of `text/x-exoplayer-cues`, we will use `application/x-media3-cues`.
The prefix should be `application` not `text` since the encoded form is arbitrary bytes, not necessarily text. The name should not reference `exoplayer`, since the Media3 Extractors (which are not part of `exoplayer`) produce this format.
PiperOrigin-RevId: 550181852
`TtmlDecoder` which used to be `SimpleSubtitleDecoder` will now be called `TtmlParser` and implement SubtitleParser interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `TtmlParser` instance.
PiperOrigin-RevId: 549700490
This tracker aims to replicate the behavior of a specific codec to
ensure MediaCodecRenderer correctly detects stream and output
format transitions. The class was needed because MediaCodecRenderer
made assumptions about codec behavior this codec did not fulfil (in
particular, changing timestamps and number of samples).
Since then, MediaCodecRenderer was made more robust to this kind of
codec behavior in general and currently has no assumptions that
require any special handling of this codec. This means we can remove
the workaround completely.
PiperOrigin-RevId: 549610989
This is no longer flaky because WebVTT subtitles are decoded on the
loading thread (enabled in this test with
`defaultExractorsFactory.setTextTrackTranscodingEnabled(true)` - and
supported for WebVTT since f0f24aa0d4).
PiperOrigin-RevId: 549594291
The class tries to be flexible to support as many different input
and codec behavior combinations as possible. But so far it didn't
spell out its remaining assumptions and explicit non-assumptions,
making it hard to know which behavior to rely on.
PiperOrigin-RevId: 549589347
Updated `ExoTrackSelection` to provide the most recent bitrate estimate, enabling the inclusion of measured throughput (mtp) as a CMCD-Request field in Common Media Client Data (CMCD) logging.
Additionally, made changes to the `checkArgument` methods in `CmcdLog` to prevent the use of default values in certain cases.
#minor-release
PiperOrigin-RevId: 549369529
`WebvttDecoder` which used to be `SimpleSubtitleDecoder` will now be called `WebvttParser` and implement `SubtitleParser` interface.
For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `WebvttParser` instance. `WebvttSubtitle` will still be used behind the scenes to handle overlapping `Cues`.
PiperOrigin-RevId: 549298733
The end-to-end test output for the overlapping SRT and SSA subtitles
is currently incorrect. They will be fixed in a future change that
updates `TextRenderer` to support this overlap.
The 'extra' samples visible in the extractor test output files are
'empty cue list' samples produced by `SsaParser`. They will go away
when this implementation is updated to remove this behaviour and rely
on `CuesWithTiming.durationUs` instead (the 'empty list' behaviour is
not required by the `SubtitleParser` interface).
PiperOrigin-RevId: 549264593
*** Original commit ***
Rollback of b69b33206e
*** Original commit ***
Mark output sample as decode-only based on start time
We currently do the same check on the input timestamps and
expect the output timestamps to match. Some codecs produce
samples with modified timestamps and the logic is a lot safer
when the comparison with the start time is done on the output
side of the codec.
Issue: google/ExoPlayer#11000
***
***
PiperOrigin-RevId: 549019403
This ensures the DownloadService stays functional on Android 14
where defining this type is required. On Android 14 and above,
the app also needs to define the DATA_SYNC permission, which is
added to the demo app as well. In the future, this service type
will no longer be supported and DownloadService needs to be
rewritten with another background scheduling framework.
Issue: google/ExoPlayer#11239
PiperOrigin-RevId: 548994842
This was done because it was deemed correct to only start at timestamp
zero when the code was originally written. However, in case of
prerolling from a keyframe, many samples will get the same timestamp,
which is not correct and interferes with downstream logic
that deals with timestamps.
PiperOrigin-RevId: 548986160
Reading a discontinuity from a media period indicates that a position
reset is required. As part of this event, the media period may need
further loading (e.g in a MergingMediaPeriod where one stream reported
a discontinuity and the other need to reload from this position).
This currently fails if the media periods was already fully loaded and
we started loading further items in the playlist. As a result, playback
is stuck forever. We can fix this by detecting that further loading is
needed and resetting the loading period to the current one.
The existing MergingPlaylistPlaybackTest already covers this case
reliably, because it combines all the right preconditions (merging
source, clipping to get a discontinuity and a playlist).
PiperOrigin-RevId: 548735177
This is a step towards adding general support for overlapping
subtitles in these formats (and others), both muxed and sideloaded:
* Issue: google/ExoPlayer#10295
* Issue: google/ExoPlayer#4794
This change adds these files to the end-to-end playback tests too, but
the subtitle track is currently disabled because renderer-side subtitle
parsing causes flaky tests (due to an uncontrolled thread in
`SimpleSubtitleDecoder`). The subtitle track will be re-enabled in
a follow-up change when loading-side subtitle parsing is added (so the
tests will no longer be flaky). At this point the overlapping subtitles
**still** won't be supported end-to-end, but a second change will
resolve this will changes in `TextRenderer` - which will change the
end-to-end playback dumps to reflect the overlapping subtitles.
PiperOrigin-RevId: 548705032
The streams return end-of-input if they read no samples, but know that
they are fully buffered to at least the clipped end time. This helps to
detect the end of stream even if there are no new buffers after the end
of the clip (e.g. for sparse metadata tracks).
The race condition occurs because the buffered position is evaluated
after reading the sample. So between reading "no sample" and checking
the buffered position, the source may have loaded arbitrary amounts
of data. This may lead to a situation where the source has not read
all samples, reads NOTHING_READ (because the queue is empty) and then
immediately returns end-of-stream (because the buffered position
jumped forward), causing all remaining samples in the stream to be
skipped. This can fixed by moving the buffered position check to
before reading the sample, so that it never exceeds the buffered
position at the time of reading "no sample".
#minor-release
PiperOrigin-RevId: 548646464
Also re-use the `CuesWithTimingSubtitle` implementation (previously a
private class inside `DelegatingSubtitleDecoder`) in `ExoPlayerCuesDecoder`.
PiperOrigin-RevId: 548612040
It will act similarly to `SubtitleDecoderFactory`, but return parsers instead of decoders. In turn `SubtitleDecoderFactory.createDecoder()` cab wrap those parsers with `DelegatingSubtitleDecoder`.
PiperOrigin-RevId: 548528054
`PgsDecoder` which used to be `SimpleSubtitleDecoder` will now be called `PgsParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `PgsParser` instance.
PiperOrigin-RevId: 548520549
`DvbDecoder` which used to be `SimpleSubtitleDecoder` will now be called `DvbParser` and implement `SubtitleParser` interface. There was, however, already a `DvbParser`, used by `DvbDecoder` behind the scenes. Hence, the refactoring only requires the existing `DvbParser` to adhere to the new `SubtitleParser` interface.
For backwards compatibility, we will have the same functionality as `DvbDecoder` provided by `DelegatingSubtitleDecoder` backed-up by a new `DvbParser` instance, available from the `SubtitleDecoderFactory`.
PiperOrigin-RevId: 548155759
`Tx3gDecoder` which used to be `SimpleSubtitleDecoder` will now be called `Tx3gParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `Tx3gParser` instance.
PiperOrigin-RevId: 548144492
Add Ogg ID Header and Comment Header Pages to the Ogg encapsulated Opus for offload playback. This further matches the RFC 7845 spec and provides initialization data to decoders.
PiperOrigin-RevId: 548080222
These tests allow to verify the samples sent for decoding,
when decoders are reset, which samples are dropped as decode-only
for video and which samples are sent to the AudioTrack for playback.
The test exercises all combinations of merges where audio or video
is the primary track and where audio, video or both are clipped.
PiperOrigin-RevId: 548061254
These tests allow to verify the samples sent for decoding,
when decoders are reset, which samples are dropped as decode-only
for video and which samples are sent to the AudioTrack for playback.
The test exercises all combinations of clipping transitions for
sources that are either clipped at the start, the end, or both.
PiperOrigin-RevId: 547730824
When a renderer is pre-enabled (while another playback is still
ongoing), we pass mayRenderStartOfStream=false to Renderer.enable.
This ensures we don't show any first frames while the previous media
is still playing.
Currently, we never tell the renderer when we actually stop playing
the previous media so that it could render the start of the stream,
because we allow this as soon as the renderer is in STATE_STARTED and
we assume that we have to be in STATE_STARTED to make this stream
transition.
While this assumption is true, there are also cases where we can't
start the renderers because they are not ready yet and the video
renderer can't become ready because it didn't render its first frame.
This effectively blocks playback forever.
The most direct way of solving this, is to tell the renderer that
playback has transitioned and that it is now allowed to render the
start of the stream. This means it can never get blocked as described
above.
PiperOrigin-RevId: 547727347
`Mp4WebvttDecoder` which used to be `SimpleSubtitleDecoder` will now be called `Mp4WebvttParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `Mp4WebvttParser` instance.
PiperOrigin-RevId: 547248157
For sync-sample-only formats, we have an optimization to drop all buffers
with less than the start time when writing them to the queue.
For the same formats, if we set a new start time (=seek), we only seek
to the buffer at or before the start time. This means the first sample
in the queue is different depending on whether we seek to a start time
or set a start time and then write samples. This is inconsistent and
effectively means the first sample depends on a race condition between
the Loader thread (writing samples) and the playback thread (attempting
an initial seek in the already loaded samples).
The effect of this inconsistency is that we have to decode one sample
we don't need (and could have skipped) and that some tests become flaky
if the test setup runs into the mentioned race condition.
The fix is to change the SampleQueue seek method to also seek to
a sample at or after the specified time, to align the behavior to the
case where we write the same samples to an empty queue.
The change also clarifies the Javadoc of
MimeTypes.allSamplesAreSyncSamples to note that this should really only
return true if the samples have no "duration" that matters. Otherwise,
we could reasonably return true for most subtitle formats although it
would break subtitle display because we'd remove samples that start
before the seek time.
PiperOrigin-RevId: 547189941
Also parse the PCM encoding for lpcm in MP4, and update `MatroskaExtractor`
similarly.
Tested manually in the demo app using an MP4 with 24-bit big endian audio.
PiperOrigin-RevId: 546878505
Some adjustments to the test to make it more correct and prevent it
from becoming flaky:
- Use separate output dump files per test setup. Once we add more data
to these files, they are not guaranteed to be the same anymore.
- Use a seek position that is actually behind the midroll as described
in the test setup.
- Change ad insertion position to ensure the ad group duration doesn't
exceed the underlying media duration.
- Add a wait for isLoading to ensure the late insertion of an ad group
happens consistently at the same processing stage.
PiperOrigin-RevId: 546825183
This changes all MediaSources in our library to allow updates to
their MediaItems (if supported).
Issue: google/ExoPlayer#9978
Issue: androidx/media#33
PiperOrigin-RevId: 546808812
`SubripDecoder` which used to be `SimpleSubtitleDecoder` will now be called `SubripParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `SubripParser` instance.
PiperOrigin-RevId: 546538113
`SsaDecoder` which used to be `SimpleSubtitleDecoder` will now be called `SsaParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `SsaParser` instance.
PiperOrigin-RevId: 546336035
`DelegatingSubtitleDecoder` is a `SimpleSubtitleDecoder` that delegates to a `SubtitleParser` instance (e.g. future implementations like `WebvttParser`, `SubripParser`, `SsaParser`, `DvbParser` etc)
It will be in the `exoplayer` package, rather than `extractor` and only be used in the decoding flow which happens after SampleQueue (and to be deprecated). When this decoding flow is deprecated and removed, the class can be later deleted.
PiperOrigin-RevId: 546317528
This makes tests more realistic because the returned value matches
the rest of the simulated test time.
It also prevents test flakiness in (yet to be written) tests that
may not correctly advance the playback time in the position tracker.
PiperOrigin-RevId: 546011842
When selecting progressive and HLS tracks, we currently check if
we can either seek in the existing samples or are starting from the
beginning of the stream. In both cases, we don't need to reload the
stream and can continue reading.
Seeking to the beginning isn't side-effect free though because it
also sets the startTimeUs to zero. Whether a seek to the beginning
is successful also depends on whether we already loaded a sample or
not. This mean that the startTimeUs value is set (or not set) based
on the speed of the Loader thread even for the same input starting
from the beginning. This race condition means the actual samples
we write to the stream may differ if the stream has initial samples
with negative timestamps.
We can avoid this race condition by checking if the queue is empty
first, so that we only call seekTo if really needed.
PiperOrigin-RevId: 546010951
Robolectric writes warnings to the log output because the Surfaces
we create are not released and pollute the test environment. This
causes performance issues if tests are run repeatedly.
PiperOrigin-RevId: 545906757
We have the optimization to skip buffers if the release time is
exactly the same as the one for the previous buffer. This makes
sense under the assumption that these buffers get released to
a visible Surface and will be ignored anyway.
However, it's also helpful to provide a customization option to not
do this for cases where the outputting MediaCodecAdapter is not
directly talking to a visible Surface or for tests where we can't
fully control the vsync timing of the Surface and want to ensure
we output all samples that are meant to be shown.
PiperOrigin-RevId: 545906113
This makes tests more realistic because the returned value matches
the rest of the simulated test time.
It also prevents test flakiness in (yet to be written) tests that
may accidentally drop output buffers or calculate the wrong values.
PiperOrigin-RevId: 545690008
Upon track transition of offloaded playback of gapless tracks, the framework will reset the playback head position. The AudioTrackPositionTracker must be made to expect the reset and cache accumulated sum of rawPlaybackHeadPosition.
#minor-release
PiperOrigin-RevId: 545602979
This allows MediaSources to accept MediaItem updates after creation.
This CL adds the handling and plumbing logic in `ExoPlayerImpl`,
`ExoPlayerImplInternal`, `MediaSourceList` and `MaskingMediaSource`.
It also updates all forwarding/wrapping sources to forward these calls
to their wrapped instance.
The actual functionality is only added to `FakeMediaSource` instances in
tests so far.
PiperOrigin-RevId: 545450210
This plumbs a duration through `SampleQueue` which will make it easier
to handle transcoding muxed subtitles from e.g. SubRip to
`text/x-exoplayer-cues`.
This change is a no-op to the end-to-end behaviour of ExoPlayer because
currently we only support parsing sideloaded subtitles before
`SampleQueue`, and by adding the duration we don't affect the cues that
are ultimately output by `Player.Listener.onCues` (as shown by no change
to the golden files for `WebvttPlaybackTest` in this commit).
I considered making `CuesWithStartTimeAndDuration` implement
`Bundleable` (and deleting `CueEncoder/Decoder`) but decided against
it because we are deliberately not encoding `startTimeUs` (since that's
encoded as the sample time in `SampleQueue`). I also considered
introducing another type that only has `List<Cue>` and `durationUs`
fields, but it didn't seem necessary, since we want `startTimeUs`
everywhere else (except inside `SampleQueue`).
PiperOrigin-RevId: 545226847
Instead of playing or pausing itself, the ExoPlayer implementation should only update the playback suppression reason as and when audio outputs are added or removed dynamically.
PiperOrigin-RevId: 544379033
Add a fail-fast check in `ExoPlayerImpl` to ensure the equality of the lengths of `ShuffleOrder` and the current playlist. Also improve the documentation of `setShuffleOrder(ShuffleOrder)` with explicit instruction on this.
Issue: androidx/media#480
#minor-release
PiperOrigin-RevId: 544009359
It currently wrongly documents that it is only called before reading
streams (that has never been the case and all MediaPeriods already need
to handle calls after reading samples from the streams).
It was also a bit unclear what a discontinuity implies and the new
Javadoc calls out the main use case for discontinuties and the intended
meaning of returning a discontinuity.
#minor-release
PiperOrigin-RevId: 543989124
MP4 edit lists sometimes ask to start playback between two samples.
If this happens, we currently change the timestamp of the first
sample to zero to trim it (e.g. to display the first frame for a
slightly shorter period of time). However, we can't do this to audio
samples are they have an inherent duration and trimming them this
way is not possible.
#minor-release
PiperOrigin-RevId: 543420218
*** Original commit ***
Mark output sample as decode-only based on start time
We currently do the same check on the input timestamps and
expect the output timestamps to match. Some codecs produce
samples with modified timestamps and the logic is a lot safer
when the comparison with the start time is done on the output
side of the codec.
Issue: google/ExoPlayer#11000
***
PiperOrigin-RevId: 543379665
This change uses this new method everywhere we currently `instanceof`
check an `Extractor` directly. This allows us to introduce
wrapping/delegating `Extractor` instances - because the `instanceof`
checks will continue to operate on the underlying instance.
HLS is a slightly different case, because it directly re-instantiates
`Extractor` instances, which is not compatible with an arbitrary
wrapping structure. Luckily the only `Extractor` instances that HLS
re-instantiates do not support muxed subtitles, so won't be wrapped
in the first place (although future changes might use the
delegating-`Extractor` pattern for other purposes, which might affect
HLS).
PiperOrigin-RevId: 542550928
Devices pre-API 33 are not able to comprehend the position reset that occurs by the HAL in offloaded gapless track transitions.
PiperOrigin-RevId: 542503662
When an app tried to re-prepare a live streeam with server side inserted
ad after a playback exception, the player tried to find the ad group by
its index in the ad playback state of the next timeline when creating
the first period.
If a source that supports server side ad, has removed the ad playback
state when the source has been removed, this causes a crash. For live
streams this is a reasonable thing to do given the exception could be
caused by an invalid ad playback state.
This change removes the ad metadata from the current period for live
streams and the timeline. In case the ad playback state is not reset
by the source, the first timeline refresh would ad the metadata again.
PiperOrigin-RevId: 541959628
Some events may arrive after the playlist is cleared (e.g. load
cancellation). In this case, the DefaultPlaybackSessionManager may
create a new session for the already removed item.
We already have checks in place that ignore events with old
windowSequenceNumbers, but these checks only work if the current
session is set (i.e. the playlist is non-empty). The fix is to add
the same check for empty playlists by keeping note of the last
removed window sequence number.
PiperOrigin-RevId: 541870812
Instead of providing `playbackDurationUs` and `loadPositionUs` individually, which are used to calculate the buffer duration for CMCD logging, we can directly pass the pre-calculated `bufferedDurationUs` available in the `getNextChunk` method of the chunk source classes.
Issue: google/ExoPlayer#8699
#minor-release
PiperOrigin-RevId: 540630112
The APIs /related fields for playback suppression due to unsuitable output should be renamed from '..SuppressPlaybackWhenNoSuitableOutputAvailable' to '..SuppressPlaybackOnUnsuitableOutput'
PiperOrigin-RevId: 540555715
*** Original commit ***
Rollback of 2a6f893fba
*** Original commit ***
Set video size to 0/0 when video render is disabled
In terms of MCVR wi...
***
PiperOrigin-RevId: 540525069
The existing NullableType has been deprecated 5 years ago and causes
crashes in Kotlin apps because Kotlin doesn't recognize this annotation
as a nullable type annotation.
While we can't align on a single @Nullable annotation yet, we can at
least replace this one by JSR305's @Nonnull(MAYBE) as it fulfils all
requirements, including full Kotlin compatiblity. To avoid the
cumbersome name, we can redefine it as our own @NullableType
annotation. (We can't use @Nullable to avoid name clashes with the main
@Nullable annotation from AndroidX)
Issue: google/ExoPlayer#6792
PiperOrigin-RevId: 540497469
These comments reflect the parameter names of the constructor that
we're reflectively calling, but errorprone complains that they don't
match the parameter names of `Constructor.newInstance`.
PiperOrigin-RevId: 540348118
Previously `AsynchronousMediaCodecCallback.mediaCodecException` was
cleared when flushing completed. This behaviour was changed in
aeff51c507
so now the exception is not cleared.
The result after that commit was that we would **only** suppress/ignore
the expression if a flush was currently pending, and we would throw it
both before and after the flush. This doesn't really make sense, so this
commit changes the behaviour to also throw the exception during the
flush.
This commit also corrects the assertion in
`flush_withPendingError_resetsError` and deflakes it so that it
consistently passes. The previous version of this test, although the
assertion was incorrect, would often pass because the
`dequeueInputBuffer` call would happen while the `flush` was still
pending, so the exception was suppressed.
#minor-release
PiperOrigin-RevId: 540237228
We currently do the same check on the input timestamps and
expect the output timestamps to match. Some codecs produce
samples with modified timestamps and the logic is a lot safer
when the comparison with the start time is done on the output
side of the codec.
Issue: google/ExoPlayer#11000
PiperOrigin-RevId: 540228209
With playback suppression in place, the devices can be added when the playback on ExoPlayer is in the suppression state. Also, it is quite possible that a suitable audio output device on which playback is ongoing gets removed requiring the Player to pause the playback. These requirements can be fullfilled using AudioDeviceCallbacks which has been implemented with this change.
PiperOrigin-RevId: 539559193
In case the player is reset while a live stream is playing, the current
period needs to be a placeholder. This makes sure that the default start
position is used when the first live timeline arrives after re-preparing.
#minor-release
PiperOrigin-RevId: 539044360
Add support for including Common Media Client Data (CMCD) in the outgoing requests of adaptive streaming formats DASH, HLS, and SmoothStreaming.
API structure and API methods:
* CMCD logging is disabled by default, use `MediaSource.Factory.setCmcdConfigurationFactory(CmcdConfiguration.Factory cmcdConfigurationFactory)` to enable it.
* All keys are enabled by default, override `CmcdConfiguration.RequestConfig.isKeyAllowed(String key)` to filter out which keys are logged.
* Override `CmcdConfiguration.RequestConfig.getCustomData()` to enable custom key logging.
NOTE: Only the following fields have been implemented: `br`, `bl`, `cid`, `rtp`, and `sid`.
Issue: google/ExoPlayer#8699
#minor-release
PiperOrigin-RevId: 539021056
This CL introduces the new public API setSuppressPlaybackWhenUnsuitableOutput which if set to TRUE will cause suppression of a requested playback if that is going to happen on an unsuitable audio output (e.g. builtin speaker on a WearOS device).
PiperOrigin-RevId: 538867212
*** Original commit ***
BEGIN_PUBLIC
Set video size to 0/0 when video render is disabled
In terms of MCVR with a `VideoRendererEventListener`, the video size is set to
0/0 right after `onVideoDisabled()` is called and is set to the actual size as
soon as the video size is known after 'onVideoEnabled()`.
For ExoPlayer and in terms of the `Player` interface, `Player.getVideoSize()`
returns a video size of 0/0 when `Player.getCurrentTracks()` does not support
`C.TRACK_TYPE_VIDEO`. This is ensured by the masking behavior
***
PiperOrigin-RevId: 537938947
With `AudioOffloadModePreference` `AUDIO_OFFLOAD_MODE_PREFERENCE_REQUIRED`, the `DefaultTrackSelector` will select a single audio track that it finds is offload compatible. If not any audio track is supported in offload, then no track will be selected.
PiperOrigin-RevId: 537877183
Otherwise, texture output errors out if video decoding decodes faster than audio,
hitting the end of the file, while audio is still in the middle of the file.
PiperOrigin-RevId: 536679568
*** Original commit ***
ExoPlayer: Add setVideoFrameProcessorFactory().
This allows apps to use a custom VideoFrameProcessor implementation for video
playback. This may be useful, for example, when outputting to a texture.
***
PiperOrigin-RevId: 536391597
This change moves the default logic into the actual Player
implementations, but does not introduce any behavior changes compared
to addMediaItems+removeMediaItems except to make the updates "atomic"
in ExoPlayerImpl, SimpleBasePlayer and MediaController. It also
provides backwards compatbility for cases where Players don't support
the operation.
Issue: google/ExoPlayer#8046
#minor-release
PiperOrigin-RevId: 534945089
This change removes it from `Player.Listener` and `AnalyticsListener`,
use `onPositionDiscontinuity` with `DISCONTINUITY_REASON_SEEK` instead.
#minor-release
PiperOrigin-RevId: 534757426
Added piping to present offload support from the audio sink to the renderer and track selection. Applications can set offload mode preference and with both sink support and compatible track selection, renderer will be configured for offload.
PiperOrigin-RevId: 534450534
This allows apps to use a custom VideoFrameProcessor implementation for video
playback. This may be useful, for example, when outputting to a texture.
PiperOrigin-RevId: 534044831
The methods in ExoPlayerImpl and MediaControllerImplBase that determine
the new PlayerInfo/PlaybackInfo currently have a hard-to-reason-about
setup where the method generating the new info accesses other methods
that rely on the existing class field instead of working with the
passed in PlayerInfo/PlaybackInfo. This prevents reuse of the util
methods (e.g. for replaceMediaItems) because they access potentially
stale state.
This change untangles these methods a bit by making the util methods
either static or at least ensure that they don't rely on existing
class fields of PlayerInfo/PlaybackInfo. Overall, the change is a
complete no-op.
#minor-release
PiperOrigin-RevId: 534036633
In terms of MCVR with a `VideoRendererEventListener`, the video size is set to
0/0 right after `onVideoDisabled()` is called and is set to the actual size as
soon as the video size is known after 'onVideoEnabled()`.
For ExoPlayer and in terms of the `Player` interface, `Player.getVideoSize()`
returns a video size of 0/0 when `Player.getCurrentTracks()` does not support
`C.TRACK_TYPE_VIDEO`. This is ensured by the masking behavior of
`ExoPlayerImpl` that sets an empty track selection result when the playing
period changes due to a seek or timeline removal.
When transitioning playback from a video media item to the next, or when
seeking within the same video media item, the renderer is not disabled.
#minor-release
PiperOrigin-RevId: 533479600
Docs:
* https://developer.android.com/build/publish-library/configure-pub-variants#single-pub-var
* https://developer.android.com/reference/tools/gradle-api/8.0/com/android/build/api/dsl/PublishingOptions
This resolves the following warning from Android Gradle Plugin 7.2.2 and
helps unblock the upgrade to AGP 8.0.1:
> Software Components will not be created automatically for Maven
> publishing from Android Gradle Plugin 8.0. To opt-in to the future
> behavior, set the Gradle property
> `android.disableAutomaticComponentCreation=true` in the
> `gradle.properties` file or use the new publishing DSL.
>
> Affected Modules: `lib-cast`, `lib-common`, `lib-container`,
> `lib-database`, `lib-datasource`, `lib-datasource-cronet`,
> `lib-datasource-okhttp`, `lib-datasource-rtmp`, `lib-decoder`,
> `lib-effect`, `lib-exoplayer`, `lib-exoplayer-all (legacy)`,
> `lib-exoplayer-dash`, `lib-exoplayer-hls`, `lib-exoplayer-ima`,
> `lib-exoplayer-rtsp`, `lib-exoplayer-smoothstreaming`,
> `lib-exoplayer-workmanager`, `lib-extractor`, `lib-media2 (legacy)`,
> `lib-mediasession (legacy)`, `lib-muxer`, `lib-session`,
> `lib-transformer`, `lib-ui`, `lib-ui-leanback`, `test-utils`,
> `test-utils-robolectric`
Issue: androidx/media#409
PiperOrigin-RevId: 533464133
