PlaybackVideoGraphWrapper will soon contain an input and an output video
sink, as the rendering of the VideoGraph output frames will be handled
by a DefaultVideoSink instance.
PiperOrigin-RevId: 683167795
If a codec received the EOS signal and already returned the last
output buffer, we should expect the output EOS very quickly. If
it doesn't arrive within 100ms, we can proceed to end the stream
manually without waiting any further to prevent cases where the
codec is completely stuck otherwise.
PiperOrigin-RevId: 679633116
The buffered position was last updated before the beginning of
the renderer loop in doSomeWork. As the loading happens on a
background thread, it may have progressed further already
depending on how long it took to run the renderer loop.
It's slightly more correct to pass in an updated value to
shouldStartPlayback so that playback can start quicker if the
buffering is particularly fast.
PiperOrigin-RevId: 679203465
We began to use a different preload thread than the main thread in the `DefaultPreloadManagerTest`, then in the test execution, we should also ensure that the events queued on the preload looper have been executed.
Also, there is an edge case also causing flakiness. Assume that `DefaultPreloadManager` is preloading source B, then the app invalidates and triggers another sequence of preloading, say they are A, B and C. There is possibility that source B finishes preloading (started before `invalidate`) when A starting to preload, then `onPreloadSkipped` will be triggered for source B instead of `onPreloadCompleted`. However, the functional block inside of `onPreloadSkipped` is dispatched asynchronously, and by then it's possible that B starts to preload again at the consequence of A being completed, then the functional block just mentioned may think that the current source matches at B, and will advance the current preloading source to C, without informing the `Listener.onPreloadCompleted` for it. As the result, the `Listener.onPreloadCompleted` can never be triggered for B for the second sequence. To fix this, we should prevent the functional block in `onPreloadCompleted`, `onPreloadError`, `onPreloadSkipped` to be even dispatched, when the source doesn't match the current preloading one.
PiperOrigin-RevId: 679145353
This check is also done when setting a surface on ExoPlayerImpl,
but by the time we configure the codec the surface may have become
invalid (e.g. when it is destroyed). Even though we immediately remove
a destroyed surface, we could still accidentally use it before the
removal is processed. To avoid these edge cases, we can simply not
configure the codec with an invalid surface.
PiperOrigin-RevId: 678741425
Allow apps to preload the first period of the next window in
the playlist of `ExoPlayer`. By default playlist preloading is
disabled. To enable preloading,
`ExoPlayer.setPreloadConfiguration(PreloadConfiguration)` can be
called.
`LoadControl` determines when to preload with its implemenation of `shouldContinuePreloading(timeline, mediaPeriodId, bufferedDurationUs)`.
The implementation in `DefaultLoadControl` allows preloading only when
the player isn't currently loading for playback. Apps can override this
behaviour.
Issue: androidx/media#468
PiperOrigin-RevId: 677786017
AudioTrack doesn't automatically ramp up the volume after a flush
(only when resuming with play after a pause), which causes audible
pop sounds in most cases. The issue can be avoided by manually
applying a short 20ms volume ramp, the same duration used by the
platform for the automatic volume ramping where available.
Together with the already submitted 6147050b90, this fixes the
unwanted pop sounds for most cases in the desired way. It only
leaves two cases that are not handled perfectly:
- If the media file itself contains a volume ramp at the beginning,
we wouldn't need this additional ramping. Given the extremely
short duration, this seems ignorable and we can treat it as a
future feature request to mark the beginning of media in a special
way that can then disable the volume ramping.
- For seamless period transitions where we keep using the same
AudioTrack, we may still get a pop sound at the transition. To
solve this, we'd need a dedicated audio processor to either ramp
the end of media down and the beginning of the next item up, or
apply a very short cross-fade. Either way, we need new signalling
to identify cases where the media originates from the same source
and this effect should not be applied (e.g. when re-concatenating
clipped audio snippets from the same file).
PiperOrigin-RevId: 676860234
This method is documented that it may only be called in `STATE_OPENED`
or `STATE_OPENED_WITH_KEYS`. It's possible for it to be called in other
states (like `STATE_ERROR`) without this guard.
Previously this didn't cause issues, but since 9d62845c45
we assume that the `sessionId` is non-null in this method, which results
in an `IllegalStateException` when the documented state restriction is
ignored.
PiperOrigin-RevId: 675969256
This is no longer needed now our `compileSdk` implies a new-enough AGP
which does this out-lining automatically via R8. See also
https://issuetracker.google.com/345472586#comment7
There's no plan to remove the `ApiXXX` classes, but no new ones need
to be added.
PiperOrigin-RevId: 675940634
The Galaxy Tab S7 FE has a device issue that causes 60fps secure H264 streams to be marked as unsupported. This CL adds a workaround for this issue by checking the CDD required support for secure H264 in addition to the current check on standard H264. If the provided performance points do not cover the CDD requirement of support 720p H264 at 60fps, then it falls back to using legacy methods for checking frame rate and resolution support.
Issue: androidx/media#1619
PiperOrigin-RevId: 675920968
Previously, track IDs were added to `trackIndicesPerSampleInQueuedOrder`
even when the sample was not committed. This caused issues where attempts
to read samples from the `SampleQueue` returned `C.RESULT_READ_NOTHING`,
which led to an exception being thrown due to the assumption that samples
were available to read.
This fix updates the logic to track sample commits by comparing the write index before and after calling `SampleQueue.sampleMetadata`. Track indices are only added if the sample was committed, ensuring accurate sample handling and avoiding exceptions.
PiperOrigin-RevId: 675526115
`PreloadMediaSource` allows to have a `startPositionUs` passed when `preload` is called, then in `PreloadControl.onContinueLoadingRequested`, it can be more intuitive to see the buffered duration rather than the absolute buffered position as the preload progress. Similar in `DefaultPreloadManager`, we haven't allowed the apps to set a custom start position for individual sources though, once we add this support, using the "duration from the start position" than the absolute position will be less error-prone, otherwise, it can run into a case that the position that the apps set is smaller than the start position.
PiperOrigin-RevId: 674251362
When processing edit lists in MP4 files, the media start position may be a non-keyframe. To ensure proper playback, the decoder must preroll to the preceding keyframe, as these preroll samples are essential for decoding but are not rendered.
Issue: google/ExoPlayer#1659
#cherrypick
PiperOrigin-RevId: 673457615
Avoids the dispatch of listener notifications of stream type/device volume change during construction of ExoPlayer. That was problematic because we end up blocking on `constructorFinished.blockUninterruptible()`
Issue: androidx/media#1692
PiperOrigin-RevId: 672965552
`Muxer` module needs to use this method, hence moved to common.
This CL also makes `getHevcProfileAndLevel` public because this is used
in `MediaCodecUtil`.
PiperOrigin-RevId: 671739166
Handling for `MediaCodec.CryptoException` was originally added only
around calls to `MediaCodec.queueSecureInputBuffer` and
`queueInputBuffer` (because these are the only methods that can throw
this exception). When asynchronous interaction with `MediaCodec` was
added in <unknown commit>, exceptions from `MediaCodec` started being stored
and bubbled out of **later** interactions with `MediaCodecAdapter`. This
means that `MediaCodecRenderer` can now see `CryptoException` thrown
from a different method, like
`MediaCodecAdapter.dequeueInputBufferIndex()`, and this ends up missing
the `catch (CryptoException)` code in `MediaCodecRenderer`. This results
in an "unexpected runtime error" stack trace like [A].
This change fixes the stack trace to:
1. Make it a "renderer exception" instead of "unexpected runtime error"
2. Include the correct DRM error code -> `@PlaybackException.ErrorCode`
mapping.
You can see the corrected stack trace below [B].
-----
[A] (synthesized from manually throwing a `CryptoException` from
`AsynchronousMediaCodecBufferEnqueuer#doQueueSecureInputBuffer`)
```
playerFailed [eventTime=11.56, mediaPos=10.35, window=0, period=0, errorCode=ERROR_CODE_UNSPECIFIED
androidx.media3.exoplayer.ExoPlaybackException: Unexpected runtime error
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:729)
at android.os.Handler.dispatchMessage(Handler.java:103)
at android.os.Looper.loopOnce(Looper.java:232)
at android.os.Looper.loop(Looper.java:317)
at android.os.HandlerThread.run(HandlerThread.java:85)
Caused by: android.media.MediaCodec$CryptoException: Test error message
at androidx.media3.exoplayer.mediacodec.AsynchronousMediaCodecBufferEnqueuer.doQueueSecureInputBuffer(AsynchronousMediaCodecBufferEnqueuer.java:232)
at androidx.media3.exoplayer.mediacodec.AsynchronousMediaCodecBufferEnqueuer.doHandleMessage(AsynchronousMediaCodecBufferEnqueuer.java:196)
at androidx.media3.exoplayer.mediacodec.AsynchronousMediaCodecBufferEnqueuer.access$000(AsynchronousMediaCodecBufferEnqueuer.java:47)
at androidx.media3.exoplayer.mediacodec.AsynchronousMediaCodecBufferEnqueuer$1.handleMessage(AsynchronousMediaCodecBufferEnqueuer.java:93)
at android.os.Handler.dispatchMessage(Handler.java:107)
at android.os.Looper.loopOnce(Looper.java:232)
at android.os.Looper.loop(Looper.java:317)
at android.os.HandlerThread.run(HandlerThread.java:85)
```
[B]
```
Playback error
androidx.media3.exoplayer.ExoPlaybackException: MediaCodecAudioRenderer error, index=1, format=Format(0, null, null, audio/mp4a-latm, mp4a.40.2, 134359, en, [-1, -1, -1.0, null], [2, 44100]), format_supported=YES
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:649)
at android.os.Handler.dispatchMessage(Handler.java:103)
at android.os.Looper.loopOnce(Looper.java:232)
at android.os.Looper.loop(Looper.java:317)
at android.os.HandlerThread.run(HandlerThread.java:85)
Caused by: android.media.MediaCodec$CryptoException: Test error message
at androidx.media3.exoplayer.mediacodec.AsynchronousMediaCodecBufferEnqueuer.doQueueSecureInputBuffer(AsynchronousMediaCodecBufferEnqueuer.java:232)
at androidx.media3.exoplayer.mediacodec.AsynchronousMediaCodecBufferEnqueuer.doHandleMessage(AsynchronousMediaCodecBufferEnqueuer.java:196)
at androidx.media3.exoplayer.mediacodec.AsynchronousMediaCodecBufferEnqueuer.access$000(AsynchronousMediaCodecBufferEnqueuer.java:47)
at androidx.media3.exoplayer.mediacodec.AsynchronousMediaCodecBufferEnqueuer$1.handleMessage(AsynchronousMediaCodecBufferEnqueuer.java:93)
at android.os.Handler.dispatchMessage(Handler.java:107)
at android.os.Looper.loopOnce(Looper.java:232)
at android.os.Looper.loop(Looper.java:317)
at android.os.HandlerThread.run(HandlerThread.java:85)
```
PiperOrigin-RevId: 670951229
Limit input image size in Transformer to be less than 4096x4096.
For very large images, this can reduce memory usage substantially,
and stays away from `GL_MAX_TEXTURE_SIZE` - often 4096
PiperOrigin-RevId: 670555939
DASH periods don't have to start at the beginning of a segment. In
these cases, they should report an initial discontinuity to let the
player know it needs to expect preroll data (e.g. to flush renderers)
This information is only available in the ChunkSampleStream after
loading the initialization data, so we need to check the sample
streams and tell them to only report discontinuities at the very
beginning of playback. All other position resets are triggered by
the player itself and don't need this method.
Issue: androidx/media#1440
PiperOrigin-RevId: 668831563
In the flaky test `ExoPlayerTest.loading_withLargeAllocationCausingOom_playsRemainingMediaAndThenThrows`, it is indeterministic that when the message `MSG_IO_EXCEPTION` from the loader thread will arrive on the playback looper. If it arrives after `MSG_PERIOD_PREPARED`, then the period can continue loading and get the three samples written to the `SampleQueue` before the intentional OOM surfacing to the `ExoPlayerImplInternal`, otherwise, the OOM will be detected by `ExoPlayerImplInternal` very early and the player disallows to load three samples, which will cause the assertion to fail.
As we are expecting the three samples to play until the playback fails, we should assume that the `Loader` encounters the OOM after those samples loaded, thus we need to put this trigger a bit later until the `SampleStreamItem`s are handled by the `FakeSampleStream`. This could be checked by the return value of `FakeMediaPeriod.continueLoading` (super class implementation). However, `FakeMediaPeriod.continueLoading` originally always returns `true`, which is not aligned with the javadoc of `MediaPeriod.continueLoading`:
"return `true` if progress was made, meaning that `getNextLoadPositionUs()` will return a different value than prior to the call, `false` otherwise."
then we should also modify that logic.
PiperOrigin-RevId: 668438316
This callback allows listeners to track when individual renderers
allow or prevent playback from being ready. For example, this is useful
to figure out which renderer blocked the playback the longest.
PiperOrigin-RevId: 667970933
Before this CL, the video sink was stuck if a flush was executed:
- after VideoSink.onInputStreamChanged, which is setting
pendingInputStreamBufferPresentationTimeUs and
- before the previous stream was fully rendered.
This is because pendingInputStreamBufferPresentationTimeUs was not reset
to TIME_UNSET when flushing the sink, so that the sink was still waiting
for the last frame of the previous stream to be rendered in
handleInputFrame/Bitmap.
PiperOrigin-RevId: 667924517
Per the javadoc, the method `MediaPeriod.maybeThrowPrepareError` is only allowed to be called before the period has completed preparation. For later errors in loading the streams, `SampleStream.maybeThrowError` will be called instead.
PiperOrigin-RevId: 665831430
It is possible for playback to be stuck when there is failure in loading further data, while the player is required to load more due to the buffered duration being under `DefaultLoadControl.bufferForPlayback`. Therefore, we check if there is any loading error in `isLoadingPossible`, so that the player will allow the playback of the existing data rather than waiting forever for the data that can never be loaded.
Issue: androidx/media#1571
#cherrypick
PiperOrigin-RevId: 665801674
This uses a 'bundled' extractor (`SubtitleExtractor`) because
`MediaParser` doesn't support transcoding subtitles to
`application/x-media3-cues`. This transcoding is required to support
non-legacy subtitle handling where they are parsed during extraction,
instead of during rendering.
PiperOrigin-RevId: 665282298
This is only used as part of legacy subtitle decoding. If any apps are
using it directly (rather than via `DashMediaSource` or `SsMediaSource`)
they probably need to enable legacy decoding in `TextRenderer` to avoid
playback failures.
PiperOrigin-RevId: 663740343
The method currently has two ways of operating with a complicated
contract:
1. outputBuffer == null -> sets a new outputBuffer and starts
draining it as far as possible.
2. outputBuffer != null -> continues draining a previous buffer,
requires that the input parameter is the same as outputBuffer.
This contract can be made cleaner by splitting the logic into
(1) setting a new output buffer and (2) draining the output buffer.
Only one parameter is needed for each method and there is no
requirement to pass in the same argument as before because we already
know what we are draining. This also means the caller of the method
doesn't have to keep track of the actual outputBuffer, allowing
further processing steps in the future that change the drained
instance.
PiperOrigin-RevId: 663316251
Previous to this change, `FrameworkMediaDrm.requiresSecureDecoder`
ignores its `sessionId` parameter on API 31+, and uses only the
`mimeType` parameter. This means the result [assumes the session is
opened at the 'default security
level'](https://developer.android.com/reference/android/media/MediaDrm#requiresSecureDecoder(java.lang.String)):
> The default security level is defined as the highest security level
> supported on the device.
This change is a no-op in all (?) cases, because the `ExoMediaDrm`
interface only exposes the zero-arg `openSession()` method, which in the
framework case **also** assumes the highest security level is preferred:
> By default, sessions are opened at the native security level of the
> device.
However, it seems more obviously correct to only make this
"highest/native security level" assumption in one place
(`openSession()`), and check the session's **actual** security level
everywhere else.
Issue: androidx/media#1603
PiperOrigin-RevId: 662872860
This method was added in API 31 (S) but it's non-functional
(incorrectly, silently, returns `false`) on the Widevine plugin version
(`16.0`) from R (API 30), which some devices up to at least API 34 are
still using.
This results in ExoPlayer incorrectly selecting an insecure decoder for
L1 secure content, and subsequently calling
`MediaCodec.queueInputBuffer` instead of `queueSecureInputBuffer`,
which is not supported and generates the following error:
> Operation not supported in this configuration: ERROR_DRM_CANNOT_HANDLE
Issue: androidx/media#1603
#cherrypick
PiperOrigin-RevId: 662852176
When there is an exception thrown from the `LoadTask`, the `Loader` will call `Loader.Callback.onLoadError`. Some implementations of `onLoadError` method may call `MediaPeriod.onContinueLoadingRequested`, and in the `PreloadMediaSource`, its `PreloadMediaPeriodCallback` will be triggered and then it can further call `continueLoading` if it finds needed. However the above process is currently done synchronously, which will cause problem. By calling `continueLoading`, the `Loader` is set with a `currentTask`, and when that long sync logic in `Loader.Callback.onLoadError` ends, the `Loader` will immediately retry, and then a non-null `currentTask` will cause the `IllegalStateException`.
Issue: androidx/media#1568
#cherrypick
PiperOrigin-RevId: 662550622
Check if the output device supports spatialization for the requested output format. If so, return a stream decoded for 6 channels in a 5.1 layout. Otherwise, return a stream decoded for 2 channels in a binaural layout.
PiperOrigin-RevId: 662546818
This is an additional signal that legacy subtitle support needs to be
explicitly enabled, and is going away at some point.
PiperOrigin-RevId: 661305694
The integration with external libraries like Glide or Coil is
currently extremely complicated. Providing the boilerplate code
to handle the ImageDecoder interface and a better hook for custom
image decoders in DefaultRenderersFactory allows apps to easily
inject their own logic for external image loading libraries.
PiperOrigin-RevId: 659508914
This API allows users to retrieve the sample size, ensuring they can allocate sufficient buffer capacity before utilizing the `readSampleData(ByteBuffer buffer, int offset)` method to read data.
PiperOrigin-RevId: 658772408
Refactor to replace instances of `RuntimeException` with `IllegalStateException`.
This change ensures exceptions can be handled more specifically without
unintended catches of unrelated exceptions.
PiperOrigin-RevId: 658337459
Added a new data source which acts an adapter to read media data from platform `MediaDataSource`. This enables adding the `setDataSource(MediaDataSource)` API to `MediaExtractorCompat`.
PiperOrigin-RevId: 657564901
Added three `setDataSource` APIs in `MediaExtractorCompat`:
- `setDataSource(Context context, Uri uri, @Nullable Map<String, String> headers)` to set data source with a content URI and optional headers.
- `setDataSource(String path)` to set data source using a file path or HTTP URL.
- `setDataSource(String path, @Nullable Map<String, String> headers)` to set data source using a file path or HTTP URL with optional headers.
PiperOrigin-RevId: 657563973
The builtin speaker is to be supported as a suitable output when that is deliberately selected for the media playback by the user in Wear OS.
PiperOrigin-RevId: 655950824
The DefaultPreloadManagerTest didn't to catch this because we use main looper as the preload looper in the tests. This CL also improves the tests by assigning the preload looper with one that corresponds to a different thread.
PiperOrigin-RevId: 655664189
This is following a renaming of registerInputFrame to handleInputFrame.
- queueInputBitmap is renamed to handleInputBitmap for consistency with
handleInputFrame.
- registerInputStream is renamed to onInputStreamChanged for consistency
with media3 method names.
PiperOrigin-RevId: 655529699
Aligns `MediaExtractorCompat` with platform behavior by using `getDeclaredLength()`
instead of `getLength()` when setting the data source. This ensures compatibility
with asset files where the length is not predefined, even though it may result
in reading across multiple logical files when backed by the same physical file.
PiperOrigin-RevId: 655153390
AudioTrack automatically ramps down volume when pausing. However,
when this happens as part of a AudioSink.flush() operation, we
need to postpone the actual flush() until the ramp down finished
in the audio system. Otherwise audio is just cut off, creating pop
sounds.
Delaying the release is fine now, because DefaultAudioSink starts
creating a new track immediately without waiting for the previous
track to be released.
Also using the opportunity to add more comments about related quirks
of the AudioTrack flush/release handling for more context.
PiperOrigin-RevId: 654794818
We currently wait until a previous AudioTrack from the same
DefaultAudioSink is released on a background thread before attempting
to initialize a new AudioTrack. This is done to avoid issues where
the releasing track blocks some shared audio memory, preventing a new
track from being created.
The current solution has two main shortcomings:
- In most cases, the system can easily handle multiple AudioTracks
and waiting for the release just causes unnecessary delays (e.g.
when seeking).
- It only waits for a previous track from the same DefaultAudioSink,
not accounting for any other tracks that may be in the process of
being released from other players.
To improve on both shortcomings, we can
(1) move the check for "is releasing tracks and thus may block shared
memory" to the static release infrastructure to be shared across all
player instances.
(2) optimistically create a new AudioTrack immediately without waiting
for the previous one to be fully released.
(3) extend the existing retry logic that already retries failed
attempts for 100ms to only start the timer when ongoing releases are
done. This ensures we really waited until we have all shared resources
we can get before giving up completely. This also acts as a replacement
for change (2) to handle situations where creating a second track is
genuinely not possible. Also increase threshold to 200ms as the new
unit test is falky on a real device with just 100ms (highlighting that
the device needed more than 100ms to clean up internal resources).
PiperOrigin-RevId: 654053123
Introduced three `setDataSource` APIs in `MediaExtractorCompat`, enabling the use of `AssetFileDescriptor` and `FileDescriptor` to set the data source.
PiperOrigin-RevId: 653957035
This controller connects the audio output to the MediaCodec so
that it can automatically propagate CTA-2075 loudness metadata.
PiperOrigin-RevId: 653628503
This replaces the existing PlaceholderSurface mode with a more
efficient solution that doesn't require a GL texture or a new
thread.
PiperOrigin-RevId: 653537596
This is a regression test for the bug introduced in bb9ff30c3a
which was manually spotted and fixed in 0d2bf49d6a.
Reverting the fix causes this test to fail.
This test is a bit hacky because we have to munge the stack trace of
the `IllegalStateException` to make it look like it was thrown from
inside `MediaCodec`. We deliberately do this 'badly' (e.g. using
`fakeMethod`) to avoid a future reader being confused by a
fake-but-plausible stack trace.
PiperOrigin-RevId: 652820878
Now the value is guaranteed to be zero (see bb9ff30c3a), we can
remove the rotation handling for it in the UI module. We can also
enforce the documentation more clearly by not even setting the
value to anything other than zero.
PiperOrigin-RevId: 652772091
Added a method to set the timeout for the SNTP request.
Also changed the default timeout to 5s instead of 10s as it seemed quite high.
Issue: androidx/media#1540
PiperOrigin-RevId: 652566008
The change in bb9ff30c3a removed the detection util completely,
but even on API21+, the codec exceptions can be thrown as
IllegalStateException and we should reinstate this check to
correctly classify the exceptions.
PiperOrigin-RevId: 652557091
This removes several workarounds that are no longer needed, including
`codecNeedsMonoChannelCountWorkaround` which has been permanently
disabled since the (incomplete) minSdk 19 clean-up in fb7438378d.
PiperOrigin-RevId: 652495578
This should have no influence on app behavior and other policies
and just allows code to depend on new API 35 platform symbols.
PiperOrigin-RevId: 652414026
We currently use displaySurface == placeholderSurface IF codec != null
as a signal that the codec is configured with a placeholder. In the
future, this placeholder might not be needed and we can decouple this
state a bit better by leaving displaySurface == null in this case and
only using placeholderSurface instead of null when setting a Surface
to the codec.
PiperOrigin-RevId: 652391729
All other AndroidX libraries have already increased their min SDK to
21.
This change renames private symbols to remove `V21` suffixes and
similar, but doesn't change public or protected symbols with similar
names, to avoid needless breakages/churn on users of the library.
Some of the dead code removal is more complex, so I've split it out
into follow-up changes to make it easier to review.
PiperOrigin-RevId: 651776556
MediaCodecRenderer might not be able to determine whether a sample
is last in time. Do not use decoder input skipping optimization
for buffers close to media end duration in order to ensure
last frame is rendered.
PiperOrigin-RevId: 651757814
The integration with `SubtitleTranscodingExtractorOutput` has been
moved inside the relevant `Extractor` implementations instead.
PiperOrigin-RevId: 651213564
VideoSink.registerInputFrame is now called for every input frame (not
only the ones that should be rendered to the input surface) because it's
the VideoSink that decides whether it wants the frame to be rendered.
PiperOrigin-RevId: 651049851
In order for DASH playback to benefit from
FLAG_READ_WITHIN_GOP_SAMPLE_DEPENDENCIES, the fMP4 extractor flag
must be set. The smallest API change that allows this is to add an
experimental method to BundledChunkExtractor.
Add a dash end-to-end test to verify that video frames are skipped at
decoder input.
PiperOrigin-RevId: 651046676
The operation almost always acquires resources straight-away,
for example a new thread or file access. This means starting
many metadata retrievals in parallel easily causes resource
contention. This problem can be alleviated by limiting the
maximum number of parallel retrievals.
Local testing showed a 20% speedup for local file retrievals
when limited to 5 in parallel. Any more parallel retrievals
did not show any improvement or started getting slower again
the more operations are allowed.
PiperOrigin-RevId: 650674685
MetadataRetriever is often used in a loop to retrieve data about many
items in a directory for example. In such cases, it's wasteful to
start a new 'playback' thread for each retrieval, in particular since
this thread is doing almost nothing (just triggering loads and handling
events). This change re-uses an existing thread if one exists already.
PiperOrigin-RevId: 650633343
During a seek, or when playing a media with clipped start,
MCVR encounters preroll decode-only buffers that are not rendered.
Use C.BUFFER_FLAG_NO_OTHER_SAMPLE_DEPENDS_ON_THIS to determine
whether a decode-only buffer is unused as reference.
These buffers can be dropped before the decoder.
When this optimization is triggered, increment
decoderCounters.skippedInputBufferCount.
Tested in ExoPlayer demo app on "One hour frame counter (MP4)"
after enabling extractorsFactory.setMp4ExtractorFlags(
FLAG_READ_WITHIN_GOP_SAMPLE_DEPENDENCIES);
Observe: "sib" increases on each seek.
PiperOrigin-RevId: 650566216
The idea was to not even write any samples to SampleQueues as
they are not needed during the metadata extraction process.
However, this is not easily possible as long as we use our
existing Extractors and MediaSource/Periods for loading given
how deeply ingrained the extraction of samples is in these
classes. For most common formats like MP4, no samples will be
extracted anyway as they can finish the prepare step without
reading any samples.
PiperOrigin-RevId: 650529371
Upon the call of `PreloadMediaSource.preload`, the source will periodically check the source refresh or period loading error, and trigger `PreloadMediaSource.PreloadControl.onPreloadError`. For now, the `DefaultPreloadManager` will skip the problematic source and continue to preload the next source. The checking of the error will be terminated when the source stops preloading or releases.
PiperOrigin-RevId: 650195817
The percentage should be interpreted as relative to the size of a parent
node.
This change makes this inheritance work correctly for percentages in
both the parent and child. It does not fix the case of a non-percentage
parent size with a percentage child size.
PiperOrigin-RevId: 649631055
Parse LHEVCDecoderConfigurationRecord with the ‘lhvC’ type and set the corresponding sample mime type to video/mv-hevc. With no MV-HEVC decoder available, fallback to single-layer HEVC decoding.
PiperOrigin-RevId: 649119173
The VideoSink has an input and an output surface. Clarify which surface
the Javadoc is referring to. Also document that the VideoSink can be fed
with images, and that multiple renderers can feed the same sink.
PiperOrigin-RevId: 649052551
MCVR crashed because MCVR registers a new input stream to VideoSink on every
`onOutputFormatChanged()`, assuming that `onOutputFormatChanged()` is only
invoked on media item transition. However, it can be called multiple times for
one media item.
PiperOrigin-RevId: 649050576
Lint somehow complains that the integer resulting from the bit-manipulation shouldn't be passed as an @IntDef parameter.
#cherrypick
PiperOrigin-RevId: 648687698
Upon track transition of offloaded playback of gapless tracks, the framework will reset the audiotrack frame position. The `AudioTrackPositionTracker`'s `AudioTimestampPoller` must be made to expect the reset and cache accumulated sum of `AudioTimestamp.framePosition`.
#cherrypick
PiperOrigin-RevId: 647294360
When handling a playback error that originates from a future item in
the playlist, we added support for jumping to that item first,
ensuring the errors 'happen' for the right 'current item'.
See 79b688ef30.
However, when we add this new position discontinuity to the
playback state, there may already be other position discontinuities
pending from other parts of the code that executed before the
error. As we can't control that in this case (because it's part
of a generic try/catch block), we need to send any pending
updates first before handling the new change.
Issue: androidx/media#1483
#cherrypick
PiperOrigin-RevId: 646968309
Setting a `null` value doesn't remove the key as expected per the `MediaFormat` API documentation, using the `removeKey` method instead which is only available starting API level 29.
PiperOrigin-RevId: 646462402
ExoPlayer used to call `stop()` before `release()`. This was removed in
<unknown commit>.
A framework bug introduced in Android 11 (API 30) resulted in some
DRM -> clear transitions failing during `MediaCodec.configure()`. An
investigation in Issue: google/ExoPlayer#8696 and b/191966399 identified that this was
due to `release()` returning 'too early' and the subsequent
`configure()` call was then trying to re-use a `Surface` that hadn't
been fully detached from the previous codec. This was fixed in
Android 13 (API 33) with http://r.android.com/2094347.
ExoPlayer worked around the framework bug by adding an arbitrary 50ms
sleep after a failed codec initialization, followed by retrying. This
was enough to resolve the problem in the test scenario on a OnePlus
AC2003.
Issue: androidx/media#1497 points out that 50ms might not be the appropriate delay
for all devices, so it's an incomplete fix. They suggested re-adding the
`MediaCodec.stop()` call instead. This also reliably resolves the issue
on the OnePlus AC2003 (with neither workaround in place, the problem
repros almost immediately).
PiperOrigin-RevId: 646461943
Extractors should not report additional tracks once they called
ExtractorOutput.endTracks. This causes thread safety issues in
ProgressiveMediaPeriod where the array of sample queues is
extended while the playback thread accesses the arrays.
Detecting this problem early is beneficial to avoid unexplained
exceptions later one. In most cases where this may happen (namely
TS extractors finding new tracks), it's better to ignore the new
tracks instead of failing completely. So this change adds a
warning log message and assigns a placeholder output.
Note: The same workaround already exists in HlsSampleStreamWrapper
and MediaExtractorCompat.
Issue: androidx/media#1476
#cherrypick
PiperOrigin-RevId: 646427213
The two arrays need to have the same length and the selection
must match in their nullness (unless for TYPE_NONE
renderers). Clarify this more clearly in the docs and add
new asssertions for it. This avoids that the player is failing
in obscure ways much later.
Issue: androidx/media#1473
#cherrypick
PiperOrigin-RevId: 646086833
The test is flaky because the decoding process in the renderer
depends on some timing from MediaCodec beyond our control and
the new keyframe added in the test is sometimes 'dropped' when
it arrives too late.
We can fix this by controlling the test progress a bit more
tightly: first rendering with the same current time until the
key frame is processed and then start increasing the time
until we've reached the end.
#cherrypick
PiperOrigin-RevId: 646064352
Summary:
This change aims to add a generic `CustomData` field to the `Format` class.
The intent is to allow ExoPlayer customers to add extra data to the Format class without forcing
specific data to be included, impacting customers that do not need it and would allow for the data
to be changed without requiring changes to the `Media3` codebase.
Some cases are not handled correctly at the moment:
- Pausing during suppressed playback should not clear the
suppression state.
- Transient focus loss while paused should be reported as
a playback suppression.
Issue: androidx/media#1436
#cherrypick
PiperOrigin-RevId: 644971218
Sometimes the reason for the current state may change. If we don't
report this again, users have no way of knowing that the reason
changed.
Also adjust ExoPlayerImpl and MediaControllerImplBase accordingly.
SimpleBasePlayer already adheres to this logic.
#cherrypick
PiperOrigin-RevId: 644970236
This helps to keep the reason always together with the state it
is referring to, avoiding any side channels and making sure there
are no accidental inconsistencies.
#cherrypick
PiperOrigin-RevId: 644969317
The 'player commands' returned to ExoPlayerImpl instruct the
player on how to treat the current audio focus state.
The current return value when playWhenReady==false is misleading
because it implies we are definitely not allowed to play as if
we've lost focus. Instead, we should return the actual player
command corresponding to the focus state we are in.
This has no practical effect in ExoPlayerImpl as we already
ignore the 'player command' completely when playWhenReady=false.
To facilitate this change, we also introduce a new internal
state for FOCUS_NOT_REQUESTED to distinguish it from the state
in which we lost focus.
#cherrypick
PiperOrigin-RevId: 644416586
There are a lot of tests for AudioFocusManager in isolation,
but almost none for the handling in ExoPlayer.
Add test coverage for all the common cases, including some
currently broken behavior that is indicated by TODOs.
PiperOrigin-RevId: 644319251
This method allows customizing the maximum position when using `Player.seekToPrevious()`.
This commit also adds two new methods to `TestExoPlayerBuilder`:
- `setMaxSeekToPreviousPosition(long)`
- `getMaxSeekToPreviousPosition()`
This change introduces a new class in Media3 `MediaExtractorCompat`, designed to be a drop-in replacement for platform `MediaExtractor`. While not all APIs are currently supported, the core functionality for the most common use cases of `MediaExtractor` is now available. Full API compatibility will be achieved in the future.
PiperOrigin-RevId: 643045429
When deselecting the single sample track and later re-selecting this
track, the current shortcuts in ProgressiveMediaPeriod don't handle
this case correctly and cause assertion failures.
In particular, this change fixes 3 issues:
1. When re-selecting the single sample track, we have cleared the
SampleQueue and need to reload the sample. The existing shortcut
should only be applied to avoid the reload when starting from a
non-zero position.
2. When de-selecting the track, ProgressiveMediaPeriod is left in
an inconsistent state where the sample queues are empty but
loadingFinished is still true. Fix this by resetting
loadingFinished to false.
3. When seeking, we avoid reloading the stream if we can keep
inside the existing samples. This logic assumes that all
remaining samples will continue to be loaded in the queue.
This condition isn't true though for single sample tracks
that have been de-selected. They appear to support the seek
inside the queue (=no seek necessary, always supported), but
still require a new load if there is no ongoing one to load
the sample. Fix this by checking this implicit assumption
(still loading, or loading finished).
PiperOrigin-RevId: 642650248
A fatal `PlaybackException` is mapped to a legacy playback state
in state `STATE_ERROR` with error code, message and extras. A
non-fatal error sent to controllers with `MediaSession.sendError`
is synced to the legacy session by setting error code and message
and merging the extras while preserving the rest of the state in
sync with the session player.
Vice versa, a `MediaController` connected to a legacy session receives
fatal errors through `Player.onPlayerErrorChanged()` and non-fatal errors
through `MediaController.Listener.onError()`.
Error codes are mapped in `LegacyConversions`. Values of error codes
in `@SessionError.ErrorCode` come from `@PlaybackExceptino.ErrorCode`
with the exception of `@SessionError.ERROR_IO` and
`@SessionError.ERROR_UNKNOWN`. These already exist in
`@PlaybackException.ErrorCode` and are mapped accordingly to avoid
semantic duplicates.
PiperOrigin-RevId: 642595517
- Video release should check for buffer timestamp (which is renderer-offsetted), rather than the frame timestamp
- ImageRenderer should report ended after all of it's outputs are released, rather than when finished consuming its input.
Add tests for timestamp handling
PiperOrigin-RevId: 642587290
It's currently not possible to remove a previously set image output
on ExoPlayer, although the underlying renderer already supports
receiving null to clear the output. Marking the parameter as
nullable allows apps to clear it as well.
PiperOrigin-RevId: 642569081
In order to do that, make the VideoSink nullable in MCVR.
We want to avoid calling VideoFrameReleaseControl.setClock directly
from MCVR when the sink is enabled. The goal is to handle all the
communication with the release control from the sink/sink provider.
PiperOrigin-RevId: 642542063
These are no longer needed now that the `Bundleable` interface has been
removed. Public methods are deprecated, package-private ones are
removed. Callers are migrated in both cases (except where tests
explicitly exist for the deprecated method).
PiperOrigin-RevId: 642294451
This interface is not used in the library. Callers can use the
`Bundle toBundle()` and `static Foo fromBundle(Bundle)` methods
defined directly on each type instead.
PiperOrigin-RevId: 642271609
The previous wording suggested that `setVideoEffects()` may **only** be
called before `prepare()`, i.e. the effect cannot be changed during
playback. The intent is instead that `setVideoEffects()` must be called
once before playback in order to configure the effects pipeline, but
the effect can then be changed during playback by further calls to
`setVideoEffects()`.
Issue: androidx/media#1393
PiperOrigin-RevId: 641853629
Before, the listener was set in onReadyToInitializeCodec, which means
that it was reset every time a new codec was used.
We need to set the listener every time MCVR is enabled (not only the
first time), because it might have been set by another renderer.
PiperOrigin-RevId: 641825717
Before this change, the timestamps output from composition playback is offset
with the renderer offset. After this change, the offset is removed and the
timestamp behaviour converges with Transformer, that is, the timestamps of
video/images frames will follow that of the composition. For example, with a
composition of two 10-s items, clipping the first with 2s at the start, the
timestamp of the first frame in the second item, will be 8s.
PiperOrigin-RevId: 641121358
When the frame release control invalidates a buffer and returns that
the buffer must be ignored, we need to exit early before performing
additional checks that may result in method calls using the invalid
buffer.
PiperOrigin-RevId: 640555688
Usages removed in this CL are:
- onProcessedStreamChange, which was already called from the VideoSink
(via VideoFrameRenderControl)
- setOutputSurface, which was also already called from the VideoSink
- setFrameRate, which this CL now sets in the VideoSink
PiperOrigin-RevId: 640530903
Before this CL, we were checking whether the video sink was initialized
to determine whether it should be used. In the meantime,
shouldUseVideoSink has been introduced. Use this boolean to check
whether to use the video sink as it's a clearer signal.
PiperOrigin-RevId: 640499147
This avoids having to add AnalyticsListener and catching the `onPlayerReleased` callback.
The `Exoplayer.release()` method is blocking and one can be sure that the player is released if the call returned. However, the method is useful for UI testing and asserting that the player is released after a certain UI action, e.g. closing the activity or detaching a window.
PiperOrigin-RevId: 640114416
The CMCD data was incorrectly added to the `dataSpec` of the media segment instead of the init segment.
Also relaxed the condition for playbackRate to be C.RATE_UNSET when creating an instance of CmcdData.Factory as there was nothing enforcing this check.
#minor-release
PiperOrigin-RevId: 639046080
When running in asynchronous mode, MediaCodec will be running the CPU to signal input and output buffers being made available for use by the player. With ExoPlayer.experimentalSetDynamicSchedulingEnabled set to true, ExoPlayer will wakeup to make rendering progress when MediaCodec raises these signals. In this way, ExoPlayer work will align more closely with CPU wake-cycles.
PiperOrigin-RevId: 638962108
