This plumbs a duration through `SampleQueue` which will make it easier
to handle transcoding muxed subtitles from e.g. SubRip to
`text/x-exoplayer-cues`.
This change is a no-op to the end-to-end behaviour of ExoPlayer because
currently we only support parsing sideloaded subtitles before
`SampleQueue`, and by adding the duration we don't affect the cues that
are ultimately output by `Player.Listener.onCues` (as shown by no change
to the golden files for `WebvttPlaybackTest` in this commit).
I considered making `CuesWithStartTimeAndDuration` implement
`Bundleable` (and deleting `CueEncoder/Decoder`) but decided against
it because we are deliberately not encoding `startTimeUs` (since that's
encoded as the sample time in `SampleQueue`). I also considered
introducing another type that only has `List<Cue>` and `durationUs`
fields, but it didn't seem necessary, since we want `startTimeUs`
everywhere else (except inside `SampleQueue`).
PiperOrigin-RevId: 545226847
Also make some casting that is needed a bit safer.
Error Prone was complaining about casting `long` to `int` before passing
it to `Extractor.seek(long, long)`:
> Converting a `long` or `Long` to an `int` to pass as a `long`
> parameter is usually not necessary. If this conversion is intentional,
> consider `Longs.constrainToRange()` instead.
PiperOrigin-RevId: 545226063
This is a corollary of `SubtitleDecoderFactory`. We may add a
`boolean supportsFormat(Format)` method later if it turns out to be
useful.
PiperOrigin-RevId: 545225489
We introduced truncation to 32 chars in <unknown commit>
and included indent and offset in the calculation. I think this is
technically correct, but it causes problems with the content in
Issue: google/ExoPlayer#11019 and it doesn't seem a problem to only truncate actual
cue text (i.e. ignore offset and indent).
#minor-release
PiperOrigin-RevId: 544677965
MP4 edit lists sometimes ask to start playback between two samples.
If this happens, we currently change the timestamp of the first
sample to zero to trim it (e.g. to display the first frame for a
slightly shorter period of time). However, we can't do this to audio
samples are they have an inherent duration and trimming them this
way is not possible.
#minor-release
PiperOrigin-RevId: 543420218
This change uses this new method everywhere we currently `instanceof`
check an `Extractor` directly. This allows us to introduce
wrapping/delegating `Extractor` instances - because the `instanceof`
checks will continue to operate on the underlying instance.
HLS is a slightly different case, because it directly re-instantiates
`Extractor` instances, which is not compatible with an arbitrary
wrapping structure. Luckily the only `Extractor` instances that HLS
re-instantiates do not support muxed subtitles, so won't be wrapped
in the first place (although future changes might use the
delegating-`Extractor` pattern for other purposes, which might affect
HLS).
PiperOrigin-RevId: 542550928
The existing NullableType has been deprecated 5 years ago and causes
crashes in Kotlin apps because Kotlin doesn't recognize this annotation
as a nullable type annotation.
While we can't align on a single @Nullable annotation yet, we can at
least replace this one by JSR305's @Nonnull(MAYBE) as it fulfils all
requirements, including full Kotlin compatiblity. To avoid the
cumbersome name, we can redefine it as our own @NullableType
annotation. (We can't use @Nullable to avoid name clashes with the main
@Nullable annotation from AndroidX)
Issue: google/ExoPlayer#6792
PiperOrigin-RevId: 540497469
The sample timestamp carried by the emsg box can have a significant delta when comparing to the earliest presentation timestamp of the segment. Using this timestamp to intialize the timestamp offset in TimestampAdjuster will cause the media sample to have a wrong adjusted timestamp. So we should defer adjusting the metadata sample timestamp until the TimestampAdjuster is initialized with a real media sample.
PiperOrigin-RevId: 538172841
Fix a bug when seeking in an opus container. The calculations inside
DefaultOggSeeker may overflow a long primitive.
Issue: androidx/media#391
#minor-release
PiperOrigin-RevId: 534128513
Docs:
* https://developer.android.com/build/publish-library/configure-pub-variants#single-pub-var
* https://developer.android.com/reference/tools/gradle-api/8.0/com/android/build/api/dsl/PublishingOptions
This resolves the following warning from Android Gradle Plugin 7.2.2 and
helps unblock the upgrade to AGP 8.0.1:
> Software Components will not be created automatically for Maven
> publishing from Android Gradle Plugin 8.0. To opt-in to the future
> behavior, set the Gradle property
> `android.disableAutomaticComponentCreation=true` in the
> `gradle.properties` file or use the new publishing DSL.
>
> Affected Modules: `lib-cast`, `lib-common`, `lib-container`,
> `lib-database`, `lib-datasource`, `lib-datasource-cronet`,
> `lib-datasource-okhttp`, `lib-datasource-rtmp`, `lib-decoder`,
> `lib-effect`, `lib-exoplayer`, `lib-exoplayer-all (legacy)`,
> `lib-exoplayer-dash`, `lib-exoplayer-hls`, `lib-exoplayer-ima`,
> `lib-exoplayer-rtsp`, `lib-exoplayer-smoothstreaming`,
> `lib-exoplayer-workmanager`, `lib-extractor`, `lib-media2 (legacy)`,
> `lib-mediasession (legacy)`, `lib-muxer`, `lib-session`,
> `lib-transformer`, `lib-ui`, `lib-ui-leanback`, `test-utils`,
> `test-utils-robolectric`
Issue: androidx/media#409
PiperOrigin-RevId: 533464133
This is a pre-requisite for the Android Studio upgrade assistant to
upgrade from AGP 7.2.2 to 8.0.1, otherwise it fails and complains
this is missing.
Issue: androidx/media#409
PiperOrigin-RevId: 533463246
This implicitly fixes a bug by removing the buggy implementation in H265Reader in favour of a working one. This change also adds tests to confirm the parsing bug is fixed.
Also fixed the javadoc link in devsite and removed javadoc links from decoder extensions as it is not published yet on developer.android.com.
#minor-release
PiperOrigin-RevId: 520636868
The FakeExtractorOutput dumps data in more readable format
so using that where ever possible.
The MdtaMetadataEntry which contains key and value dumped only "key".
Added fix to dump "value" as well.
PiperOrigin-RevId: 517968996
When seeking in fMP4, we try to extract as little samples as possible
by only starting at the preceding sync frame. This comparison should
use <= to allow sync frames at exactly the seek position.
Issue: google/ExoPlayer#10941
#minor-release
PiperOrigin-RevId: 505098172
These have the same value (`-1`), and basically the same meaning (offset
in an array/list/file/byte stream/etc), but 'position' is an overloaded
term in a media playback library, and there's a risk people assume that
methods like `Player.getCurrentPosition()` may return
`C.POSITION_UNSET`, when in fact unset media times (whether duration or
position) are always represented by `C.TIME_UNSET` which is a) a `long`
(not `int`) and b) a different underlying value. (aside:
`getCurrentPosition()` never returns an unset value, but it's a good
example of the ambiguity of the word 'position' between 'byte offset'
and 'media timestamp'.)
PiperOrigin-RevId: 492493102
In some cases we split a test method, and in other cases we just add
line breaks to make the separation between arrange/act/assert more
clear.
PiperOrigin-RevId: 492182769
To support OPUS offload, we need to provide a few configuration values
that are currently not set due to the lack of devices supporting
OPUS offload.
PiperOrigin-RevId: 491613716
The list of charsets is already hard-coded, and using `Charset` types
ensures they will all be present at run-time, hence we will never
encounter an 'unsupported' charset.
PiperOrigin-RevId: 491324466
Format expects the values of `averageBitrate` and `peakBitrate` in bps and the value fetched from AC3SpecificBox and EC3SpecificBox is in kbps.
PiperOrigin-RevId: 490756581
*** Original commit ***
Rollback of 76df06a7a3
*** Original commit ***
Parse and set `peakBitrate` for Dolby TrueHD(AC-3) and (E-)AC-3
#minor-release
***
***
PiperOrigin-RevId: 490707234
ExoPlayer is unable to detect the presence of subtitle tracks in some
MPEG-TS files that don't fully declare them. It's possible for a
developer to provide the list instead, but doing so is quite awkward
without this helper method. This is consistent for how
`DefaultExtractorsFactory` allows other aspects of the delegate
`Extractor` implementations to be customised.
* Issue: google/ExoPlayer#10175
* Issue: google/ExoPlayer#10505
#minor-release
PiperOrigin-RevId: 490214619
If there's an @param javadoc tag in a supertype then all overrides
of this method that don't also override the javadoc must use the same
parameter name.
PiperOrigin-RevId: 485857711
From ANSI-CTA-608-E R-2014 section 8.4:
> When closed captioning is used on line 21, field 2, it shall conform
> to all of the applicable specifications and recommended practices as
> defined for field 1 services with the following differences:
> 1. The non-printing character of the miscellaneous control-character
> pairs that fall in the range of 0x14, 0x20 to 0x14, 0x2F in field 1,
> shall be replaced with 0x15, 0x20 to 0x15, 0x2F when used in field
> 2.
> 2. The non-printing character of the miscellaneous control-character
> pairs that fall in the range of 0x1C, 0x20 to 0x1C, 0x2F in field
> 1, shall be replaced with 0x1D, 0x20 to 0x1D, 0x2F when used in
> field 2.
This basically means that `cc1=0x15` in field 2 should be interpreted as
`cc1=0x14` in field 1, and same for `0x1D -> 0x1C`.
The `isMiscCode` method above already handles this by ignoring the LSB
(the only difference between `0x14` and `0x15`, and `0x1C` and `0x1D`)
by AND-ing with `0xF6` instead of `0xF7`. This change uses the same
trick in `isServiceSwitchCommand`.
Issue: google/ExoPlayer#10666
#minor-release
PiperOrigin-RevId: 483927506
This is a no-op, but it's more 'correct' because it avoids any potential
sign mix-ups that come from storing an unsigned byte (with a
potentially set MSB) in a signed java byte variable.
PiperOrigin-RevId: 483409798
When debugging and fixing Issue: google/ExoPlayer#10666 I wanted to write a regression
test, but needed to add a test first... This is just a small bit of
coverage to start with. It checks the field/channel filtering works
correctly, but doesn't check any styling info. It also doesn't test
'pop on' subtitles (i.e. when the subtitle isn't shown until a 'end of
subtitle' signal is received).
PiperOrigin-RevId: 480644568
`HevcConfig.parse` misreads reserved bit to determine NAL unit type. This is currently meant to be always set to 0, but could be given some kind of meaning in a future revision.
Issue: google/ExoPlayer#10366
PiperOrigin-RevId: 460487613
As per MP4 spec, bitrates in esds boxes can be a 32 bit number which doesn't fits in Java int type, so now reading it as a long value. Our class for holding media format, only allows bitrates value to be an int as we don't expect the bitrates to be greater than or equal to 2^31. So we're limiting the values for bitrates to Integer.MAX_VALUE.
#minor-release
PiperOrigin-RevId: 458423162
This reinstates the permissive behaviour removed by
fe7e5b8181
Test file created by opening bear.opus in a hex editor and naively
duplicating the two header packets, starting at (and including) the
first `OggS` in the file and ending just before the third `OggS`.
#minor-release
Issue: google/ExoPlayer#10038
PiperOrigin-RevId: 452015662
We add an entire class like we do for parsing other codec initialization formats; it's currently not doing any parsing though (... initialization data is really simple for AV1 though: just the entire contents of the box).
For testing, we add the sample file, having been re-encoded with ffmpeg (and we also happen to have another av1 file, too).
PiperOrigin-RevId: 444890282
We add an entire class like we do for parsing other codec initialization formats; it's currently not doing any parsing though (... initialization data is really simple for AV1 though: just the entire contents of the box).
For testing, we add the sample file, having been re-encoded with ffmpeg (and we also happen to have another av1 file, too).
PiperOrigin-RevId: 439453823
This provides better compatibility with MediaExtractor, which does read these fields; we also need them for being able to mux file contents into another mp4 file.
Also, there is a minor refactor included so that we have an actual type for esds box contents instead of a pair.
PiperOrigin-RevId: 438673825
For when a track is both encrypted and has supplemental data, the sample size will be equal to `block sample size - encryption data size`.
PiperOrigin-RevId: 427807612
This is a breaking change if the annotation itself is in use in Kotlin
code. It's judged that the IntDefs in this commit are unlikely to be
referred to often in Kotlin code. This is because they're either:
- Related to esoteric parts of the library, or
- In a common part of the library but only returned from methods (and
never passed to callback methods).
A follow-up change will fix the positions of existing usages to match
this new config.
#minor-release
PiperOrigin-RevId: 426410237
This only changes IntDefs that cannot be used by apps because they're
either private or package-private.
A follow-up change will fix the positions of existing usages to match
this new config.
#minor-release
PiperOrigin-RevId: 426372273
The longer list of targets is only necessary for backwards
compatibility with existing Kotlin code that will stop compiling
if the position of the annotation becomes 'wrong' by marking it only
TYPE_USE. Since none of these IntDefs have been released (except in
media3 alpha1) we don't need to maintain this compatibility.
Also add a comment to all the places that *do* need the longer list of
targets, in order to explain why it's there and discourage copy-pasting
when defining new IntDefs in future.
Also fix some single-element arrays to remove the array notation.
#minor-release
PiperOrigin-RevId: 426108537
Populate ICY headers into MediaMetadata so that they can
propagate to the app via AnalyticsListener#onMediaMetadataChanged().
This change copies IcyHeaders.name into MediaMetadata.description
and IcyHeaders.genre into MediaMetadata.genre.
Note: MediaItem.metadata maintain their precedence and overwrite any
ICY headers parsed.
Issue: google/ExoPlayer#9677
#minor-release
PiperOrigin-RevId: 410495676
The presentation time in fMP4 is calculated by adding and subtracting
3 values. All 3 values are currently converted to microseconds first
before the calculation, leading to rounding errors. The rounding errors
can be avoided by doing the conversion to microseconds as the last step.
For example:
In timescale 96000: 8008+8008-16016 = 0
Rounding to us first: 83416+83416-166833=-1
#minor-release
PiperOrigin-RevId: 406809844
Test file produced with:
$ MP4Box -add "sample.mp4#video:colr=nclc,1,1,1" -new sample_18byte_nclx_colr.mp4
And then manually changing the `nclc` bytes to `nclx`.
This produces an 18-byte `colr` box with type `nclx`. The bitstream of
this file does not contain HDR content, so the file itself is invalid
for playback with a real decoder, but adding the box is enough to test
the extractor change in this commit.
(aside: MP4Box will let you pass `nclx`, but it requires 4 parameters, i.e. it
requires the full_range_flag to be set, resulting in a valid 19-byte colr box)
#minor-release
Issue: #9332
PiperOrigin-RevId: 405842520
