If the output sample MIME type is inferred from the input
but is not supported by the muxer, we fallback to transcoding
to a supported sample MIME type.
The audio and video renderers need to make sure not to select the PassthroughSamplePipeline for this case. Which sample MIME type
to choose is decided by the EncoderFactory.
PiperOrigin-RevId: 423272812
We may fall back to a different sample MIME type because
a) the sample MIME type inferred from the input is not supported
by the muxer or b) no encoders are available for the the requested
sample MIME type.
PiperOrigin-RevId: 422849036
TransformationRequest is otherwise immutable, so if we modify the
transformationMatrix in place (done before this cl) this may cause
confusing behaviour for apps when they reuse a TransformationRequest.
PiperOrigin-RevId: 422822916
After implementing fallback, it won't always be possible to
differentiate between muxer and encoder as the cause of an output
format not being supported.
PiperOrigin-RevId: 422780443
This CL implements fixing the input format to the encoder spec. Fixed
parameters include:
- MIME type
- Profile & level
- Resolution
- frame rate, and
- bitrate
PiperOrigin-RevId: 422513738
The app will be notified about fallback using a callback on
Transformer.Listener. Fallback may be applied separately for
the audio and video options, so an intermediate internal
FallbackListener is needed to accumulate and merge the track-specific
changes to the TransformationRequest.
PiperOrigin-RevId: 421839991
Simplifying and clarifying variables, and adding comments.
Tested by confirming demo-gl and demo-transformer both
correctly display videos
PiperOrigin-RevId: 421792079
After this change exceptions throw by MediaCodec during
encoding/decoding will result in TransformationExceptions with
ERROR_CODE_ENCODING_FAILED/ERROR_CODE_DECODING_FAILED.
Before this change ERROR_CODE_FAILED_RUNTIME_CHECK was used.
PiperOrigin-RevId: 421560396
Expected images are taken on emulators, so a larger acceptable
difference from expected images must be accepted on physical devices.
PiperOrigin-RevId: 421543441
Codec and its factories can use MediaCodec directly as for API >= 21,
the SynchronousMediaCodecAdapter methods used in Codec just correspond
to a single MediaCodec call each so there is no reason to have another
wrapping layer.
PiperOrigin-RevId: 421041177
Exceptions thrown by MediaMuxer are converted MuxerExceptions
and later to TransformationExceptions with ERROR_CODE_MUXING_FAILED.
PiperOrigin-RevId: 421033721
The encoder and sonic are now set up in the constructor rather
than in a configuration method called from processData(). This
is more similar to VideoSamplePipeline and reduces null checks.
PiperOrigin-RevId: 420260526
Only allowing TransformationExceptions to be created using the factory methods helps keeping error messages consistent. This is consistent with ExoPlaybackException.
PiperOrigin-RevId: 419841025
Compensate for aspect ratio of input frames, so that they're applied on
rectangular frames instead of square normalized-device-coordinate frames.
This fixes distortion most visible when rotating any GL video 45°
(non-rectangular frames) or 90° (stretched frames)
Tested by rotating several landscape/portrait demo videos.
(Automated tests will follow in <unknown commit>)
PiperOrigin-RevId: 419619743
* Move checking that the output format is supported by the muxer
from supportsFormat (which deals with the input format) to
ensureConfigured.
* Add maps for the supported MIME types so that the muxer can
return what MIME types it supports rather than just check a
MIME type.
PiperOrigin-RevId: 419578165
This is better than silently dropping tracks as done previously. Later,
we will implement fallback to transcoding to a supported MIME type.
PiperOrigin-RevId: 418006258
This more closely matches the pattern we have for all implementations
except DefaultMediaSourceFactory (e.g. ProgressiveMediaSource.Factory)
and other factory interfaces like (Http)DataSource.Factory.
PiperOrigin-RevId: 417826803
Switch to using sentence-case naming convention but with one character prefixes for different types.
This is a no-op change.
PiperOrigin-RevId: 417791624
Move static factories into a separate class and make it implement an interface
that will let tests customize encoder/decoder creation.
PiperOrigin-RevId: 417610825
Transformer uses ExoPlayer for reading input. Apps using Transformer
do not need to know this. So, PlaybackExceptions are converted to
TransformationExceptions with the same message, cause and error code.
The corresponding IO error codes are copied from PlaybackException.
PiperOrigin-RevId: 416793741
UnsupportedEglVersionException() is only used once, and seems a bit too
specific for Transformer. Also, it's possible for eglCreateContext to fail for
other reasons besides lack of support, so it wasn't always accurate when
thrown.
It is possible for devices not to support EGL version 2.0 though, per
https://source.android.com/devices/graphics/implement-opengl-es, which doesn't
specify the EGL version that must be supported.
PiperOrigin-RevId: 415489396
tl;dr:
In the previous transformer, the transcoding flow is
- If a the GL's input surface (from decoder) does not have data, wait 10ms
(DO_SOME_WORK)
- Else, make the decoder render **ONE** frame to the GL's input surface
- Wait at least 10ms, until the frame's texture is available
- Then process the texture
The process is quite slow, so in the new version, we do:
- If a the GL's input surface (from decoder) does not have data, wait 10ms
(DO_SOME_WORK) **same**
- Else, make the decoder render **as many frames** to the GL's input surface
- Process **as many** available textures in this DO_SOME_WORK cycle
PiperOrigin-RevId: 415474722
The input rotation is used to rotate the video during decoding, the
video is rotated so that it is in landscape orientation before encoding
and a rotation is added to the output format where necessary so that
the output video has the same orientation as the input.
PiperOrigin-RevId: 415301328
Being able to see the output of the GL pipeline is useful for debugging. For
example, when we previously saw flakiness it would have been useful to be able
to tell quickly whether the output looked wrong without needing to run a
transformation to the end then inspect the output file, and when working on
support for HDR editing it's useful to be able to do manual testing on devices
that don't support HDR encoding (but do support decoding/processing it with
GL).
Also change the progress indicator to be linear as this looks better in the
demo app when shown next to the debug preview.
PiperOrigin-RevId: 414999491
Also, add 144p as an acceptable output resolution, to allow for
a more obvious resolution difference when running the demo.
PiperOrigin-RevId: 414406664
outputHeight is the actual output height while
transformation.outputHeight could be Format.NO_VALUE
causing the FrameEditor to be used more often than
necessary in the old version.
PiperOrigin-RevId: 414304251
When calling Android's Log class directly, there's a LongLogTag
lint check that detects tags over the 23 char limit, however it
cannot detect long log tags in ExoPlayer due to the way that we
log via our own Log class. This commit adds @Size annotations to
enforce the same rule.
PiperOrigin-RevId: 413976364
Increase timeout for dequeueing a frame from the codec to reduce
flakiness. At a timeout of 2 seconds there was a 2/1000 flake rate and
at 3 seconds 0/1000. Set the timeout to 5 seconds to give plenty of
leeway.
PiperOrigin-RevId: 413946915
Previously, transformation_matrix was incorrectly applied to
texture sampling coordinates, which led to transformations
seemingly moving in the opposite position, and an undesirable
GL_CLAMP_TO_EDGE behavior when sampling outside the edge of
the texture.
PiperOrigin-RevId: 413653360
It seems fine to remove the documentation about the WebM case now we are only supporting unfragmented MP4, so that new users coming to this API aren't confused about how to set the container MIME type.
PiperOrigin-RevId: 413611472
Allows a transformation matrix to be input into Transformer,
to apply vertex transformations like cropping, rotation,
and other transformations built into android.graphics.Matrix.
Not building out into a VertexTransformation class yet, as
that class structure wouldn't make sense until we can modify
resolution, per TODOs.
PiperOrigin-RevId: 413384409
This will remove the need to implement compat code handling very old API
versions where some symbols are not available, and it reduces the burden of
dealing with media framework issues around concurrent codec usage that are
worse on older API versions. Top apps that we've surveyed as potential users
for transformer library features are using API 21 or later.
PiperOrigin-RevId: 413341540
Sometimes the empty end of stream buffer has a non-zero
data limit. Calling flip first, resets the limit to the
position which is zero in these cases.
PiperOrigin-RevId: 413156455
The test extracts and decodes the first video frame in the test media, renders it to the frame editor's input surface and then processes data. It then reads back the output from the frame editor, converts it to a bitmap and then compares that with a 'golden' bitmap (which is just the same as the test media's first video frame).
PiperOrigin-RevId: 413131811
*** Original commit ***
Remove usage of @ForOverride.
Fixes the gradle compilation failures.
Gradle dependencies need revising if we want to be using this, as
checkerframework is ahead of their latest version, such that we
can't compile.
***
PiperOrigin-RevId: 412901827
- This format is passed to the PassthroughPipeline, which doesn't use
any decoder.
- In most other cases where it is used, it is not relevant that this
format will be or has been passed to the decoder. What's relevant is
that it is the format of the input.
PiperOrigin-RevId: 412093371
We need the filename of the output videos to be predictable, because
MobileHarness requires the exact filename to pull the file.
PiperOrigin-RevId: 412092347
Fixes the gradle compilation failures.
Gradle dependencies need revising if we want to be using this, as
checkerframework is ahead of their latest version, such that we
can't compile.
PiperOrigin-RevId: 412004021
This change moves methods that are the same in
`TransformerAudioRenderer` and `TransformerVideoRenderer` to
`TransformerBaseRenderer`.
PiperOrigin-RevId: 411758928
Document that apps should retain `GlUtil.Program` while the program is in use,
and keep a reference to attributes/uniforms within the program to make sure
they don't get GC'd causing any allocated buffers passed to GL to become
invalid.
Tested manually by running gldemo and transformer.
PiperOrigin-RevId: 411516894
The features supported by `TranscodingTransformer` are a
superset of those supported by `Transformer` after merging
the video renderers in
35c891a7bf.
This change removes `TranscodingTransformer` and adds its features to
`Transformer`.
PiperOrigin-RevId: 411072392
Follow-up to a comment on
ac8e418f3d
Buffers that are useful to pass to the sample/passthrough pipeline
should either contain data or the end of input flag. Otherwise, passing
these buffers along is unnecessary and may even cause the decoder to
allocate a new input buffer which is wasteful.
PiperOrigin-RevId: 411060709
The `SefSlowMotionVideoSampleTransformer` drops frames by
setting `buffer.data = null` and updates the timestamps of the
frames it keeps. However, these buffers with dropped frames
are still used in the pipeline as they may contain other useful
information, specifically whether the end of the input has been
reached. So, the timestamps should also be updated for the buffers
where frames are dropped.
PiperOrigin-RevId: 410797678
In the near future, we will be able to specify which tests run on this
target explicitly, at which point this ignore will be removed.
PiperOrigin-RevId: 410758785
The `GlUtil` wrappers for attributes/uniforms allocate buffers that are passed into OpenGL, and it seems that the distorted output was caused by these buffers being garbage collected.
The issue was difficult to reproduce manually. Add a test that does repeated transcodes in a loop (marked `@Ignore` for now because it runs for a long time and requires network access so may be flaky) to make it easier to run many transcodes and look for inconsistent output. For now the consistency check is just based on the file size which is very likely to change if the actual video frames change.
Verified that the test fails before, and passes once the attributes and uniforms are stored in fields as in this CL.
PiperOrigin-RevId: 410581706
This change merges `TransformerMuxingVideoRenderer` and
`TransformerTranscodingVideoRenderer` into `TransformerVideoRenderer`.
Besides all features supported by `TransformerTranscodingVideoRenderer`
the new merged `TransformerVideoRenderer` also supports SEF slow motion
flatting without re-encoding like the `TransformerMuxingVideoRenderer`.
To do this, it uses a `SefSlowMotionVideoSampleTransformer` with
the `PassthroughPipeline`.
PiperOrigin-RevId: 410531478
This mime type is technically for the Muxer, and determines
the container used. In the context of the transformer, this can
be thought of more as a container mime type, to avoid confusion
with the video mime type and audio mime type.
Deprecates setOutputMimeType().
PiperOrigin-RevId: 410530707
Simple, initial implementation to allow setResolution()
to set the output height, for downscaling/upscaling.
Per TODOs, follow-up CLs may change layering, add UI,
or allow querying decoders for more resolution options.
PiperOrigin-RevId: 410203343
The decoder writes to `OpenGlFrameEditor`'s input `Surface`
and the `OpenGlFrameEditor` writes to the encoder's input `Surface`.
PiperOrigin-RevId: 409931796
The `VideoSamplePipeline` handles all steps from decoding to
re-encoding that where previously in
`TransformerTranscodingVideoRenderer`. The renderer is now only
responsible for reading the format, reading input, passing it to the
pipeline and passing the pipeline's output to the muxer.
When no transformations are needed, decoding and re-encoding is
skipped using the `PassthroughPipeline`.
PiperOrigin-RevId: 408619407
When dropping the remainder, the decoder and encoder timestamps start diverging after a few buffers when no speed changes are supposed to occur. Tracking the remainder keeps them in sync.
PiperOrigin-RevId: 408341074
* Remove GlUtil.Program String[] constructor to unify and just use the
String constructor.
* Add getAttributeArrayLocationAndEnable() to simplify things a tiny bit.
* Increase usage of constant values.
PiperOrigin-RevId: 407570340
`TransformerAudioRenderer` reads input and passes `DecoderInputBuffer`s
to the `AudioSamplePipeline`. The `AudioSamplePipeline` handles all
steps from decoding to encoding. `TransformerAudioRenderer` receives
`DecoderInputBuffer`s from the `AudioSamplePipeline` and passes their
data to the muxer.
`AudioSamplePipeline` implements a new interface `SamplePipeline`.
A pass-through pipeline will be added in a future cl.
PiperOrigin-RevId: 407555102
If the number of samples changes, the sizes will help us to verify
whether they are just split differently or extra data was added.
PiperOrigin-RevId: 407346280
This helps to prevent issues where decoders can't handle negative
timestamps. In particular it avoids issues when the media accidentally
or intentionally starts with small negative timestamps. But it also
helps to prevent other renderer resets at a later point, for example
if a live stream with a large start offset is enqueued in the playlist.
#minor-release
PiperOrigin-RevId: 406786977
`checkNotNull` should be avoided where possible.
This change adds `@EnsuresNonNull` or `@EnsuresNonNullIf` to configuration methods for fields they initialize.
`checkNotNull` is now avoided for the `@MonotonicNonNull` formats by adding `@RequiresNonNull` annotations.
`checkNotNull` is now avoided for the encoder and decoder in `feedMuxerFromEncoder()`, `feedEncoderFromDecoder()`, `feedDecoderFromInput()`, etc. by creating local variables for `encoder` and `decoder` in `render` after the configuration method calls and passing these as non-null parameters.
PiperOrigin-RevId: 405893824
