*** Original commit ***
Rollback of c2cb22a056
*** Original commit ***
Rollback of 1521e50307
*** Original commit ***
Wire up MediaMetricsListener and add configuration to...
***
PiperOrigin-RevId: 429585773
- The resources were released twice before, which is not necessary since
the MSG_RELEASE message is already in the internal player queue.
- The demo app was failing because the stop watch was stopped in
onTransformationError after being reset.
#minor-release
#mse-bug-week
PiperOrigin-RevId: 428794426
Currently only a single instance of ImaServerSideAdInsertionMediaSource is
supported at the same time in a playlist. This change makes sure that an
attempt to add multiple instances is prevented by throwing a an exception.
#minor-release
PiperOrigin-RevId: 428743140
This change makes sure played server side ads are skipped in a single period
timeline. It avoids creating an ad-MediaPeriodInfo for played postrolls and
creates a content info instead. It also sets the end position for content infos
that terminate the stream before the stream is actually finished. This prevents
the player from continue playing the remaining media delivered by the
MediaPeriod.
We also make sure that the discontinuity of played ads are not reported because
there is actually no discontinuity.
#minor-release
PiperOrigin-RevId: 428734387
This prevents a stack trace that is shown in the logs when the stream manager is
released after the activity was stopped. In this case the call to
`streamManager.destroy()` coming from `releaseSourceInternal()` of the media
source is too late and produces an error saying `Application attempted to call on
a destroyed WebView`. The error has no effect but it's nice to not have this
stack trace in the logs.
PiperOrigin-RevId: 428574231
The last used shared media period is reused after all media periods have been
released. In case the sample streams are already filled up, they need to be
reset or they download samples from the current position up to the seek
position. This causes long buffering states or load stuck exceptions.
A seek when reusing the shared period takes care for reseting the period or
internally seeks to the current position in the already available samples.
#minor-release
PiperOrigin-RevId: 428484187
We have two ways to choose the minDurationForQualityIncreaseMs value in
AdaptiveTrackSelection: use the configured value for non-live or when
enough buffered data is available, or use a fraction of the available
duration to allow switching when playing close to the live edge.
The decision point when to use which value isn't quite consistent because
we compare against availableDurationUs before making the adjustments. This
means there is range of values where no up-switching is possible despite
perfect buffering. Fix this by choosing the minimum of both values.
Issue: google/ExoPlayer#9784
#minor-release
PiperOrigin-RevId: 428474332
The timeline used to map ad groups to periods needs to report the original content period duration without subtracting the serverside inserted ad duration. When marking played ads in onPositionDiscontinuity, the public timeline has been used which crashed the app when the ads media source is playing on a window index different to zero (in a playlist).
#minor-release
PiperOrigin-RevId: 428465833
Define MediaNotification.Provider so that apps can customize
notification UX. Move MediaNotificationManager's functionality
around notifications on DefaultMediaNotificationProvider
PiperOrigin-RevId: 428024699
Ignorable ad periods are skipped to resolve the media period id with the
ad playback state of the resulting period. In case of a change in the period
position un-played ad periods are rolled forward to be played.
PiperOrigin-RevId: 428011116
This adds some missing calls to verifyApplicationThread to
ExoPlayerImpl.
Now all public methods start with this call, except listener
registrations because registration after construction on a background
thread is allowed and supported.
PiperOrigin-RevId: 428009498
All the functionality of SimpleExoPlayer has moved to ExoPlayerImpl.
Hence, ExoPlayerImpl can fulfil its own name and become an ExoPlayer
implementation. As a result, ExoPlayer.Builder can return ExoPlayerImpl
directly without using SimpleExoPlayer at all.
PiperOrigin-RevId: 427947028
And also add a test that all Player.Listener events are forwarded
to AnalyticsListener.
The AnalyticsCollector also needlessly implemented
Video/AudioRendererEventListener, which is not needed because all of
the equivalent methods are called directly and never through the
interface.
#minor-release
PiperOrigin-RevId: 427478000
Right now, the option to build an IMA DAI URI programmatically is still
package-private. To simplify the process, we can remove the StreamRequest
wrapper and directly provide an URI builder.
The same class can provide some package-private helper methods to parse the
created URI.
#minor-release
PiperOrigin-RevId: 427445326
There are two sets of listeners in ExoPlayerImpl at the moment,
which can be merged together to use a single ListenerSet. This has
the added advantage that the events that were previously sent
through the ArraySet get additional guarantees provided by ListenerSet
(e.g. correct event ordering and onEvents triggered).
Also add missing constants for onEvents to ensure all Player.Listener
methods have an corresponding constant.
#minor-release
PiperOrigin-RevId: 427415349
This brings listener invocations closer together and removes
unnecessary methods.
Also fixes a bug where a change in track selection parameters only
queued a callback but never flushed it to actually inform the
listeners.
#minor-release
PiperOrigin-RevId: 427201691
In some cases (whose where we previously used EventListener),
AnalyticsCollector is registered as a listener to receive updates,
in other cases it is called directly.
Avoid this inconsistent handling by registering it as normal listener
and removing all callbacks that are handled by the normal listener flow.
The remaining direct usages of AnalyticsCollector calls are those
callbacks that have no equivalent in Player.Listener.
#minor-release
PiperOrigin-RevId: 427201525
With this change, MediaCodecAudioRenderer always configures MediaCodec
with max output channels set to 99 on API 32+.
#minor-release
PiperOrigin-RevId: 427192801
SimpleExoPlayer used to register a listener on ExoPlayerImpl for
the old EventListener callbacks. Now both classes are merged, this is
no longer needed and should be removed in favor of calling methods
directly.
#minor-release
PiperOrigin-RevId: 427187875
We have logic to not immediately interrupt playback when an ad group
fails to load and instead let the current content play and transition
at the point where the ad group should have been.
This logic was broken by dcbdbe5341 because of one of the conditions
used MediaPeriodId.adGroupIndex, which is always -1 for content ids.
It still worked for the last ad group because the next ad group index
was C.INDEX_UNSET.
Fix the issue and amend the test that was meant to catch this to test
the ad failures for the last ad and previous ads.
Also fix the PositionInfo reported in such a case, which was also wrong.
Issue: google/ExoPlayer#9929
#minor-release
PiperOrigin-RevId: 427143223
*** Original commit ***
Rollback of d93b0093ae
*** Original commit ***
Move SimpleExoPlayer logic into ExoPlayerImpl
This makes SimpleExoPlayer a simple forwarding wrapper which can be
removed in the future.
The changes are all purely mechanical with none of the potential further
simplifications made yet...
***
PiperOrigin-RevId: 427131338
*** Original commit ***
Move SimpleExoPlayer logic into ExoPlayerImpl
This makes SimpleExoPlayer a simple forwarding wrapper which can be
removed in the future.
The changes are all purely mechanical with none of the potential further
simplifications made yet. The only exceptions are name clashes where
either EPI or SEP was calling a method in one of the classes and both
classes had different implementations for the same method name. In these
cases we needed to disambiguate between the two different
implementations (e
***
PiperOrigin-RevId: 426997821
Some strings didn't mention the context in which they are used
(for example as item in a list, or for accessibility). This makes it
harder for translators to choose the most appropriate translation and
grammar.
Also fix repeat and shuffle mode button accessibility descriptions to
indicate the action, not the current state.
PiperOrigin-RevId: 426924163
This ensures Kotlin usages of these IntDef annotations in the 'old'
position will continue to compile.
'Frequently used' is a subjective judgement. I have a parallel change
that marks all the other public IntDefs in the library as TYPE_USE
(those that I've judged to be 'rarely used' by apps).
A follow-up change will fix the positions of existing usages to be as if
they're only TYPE_USE.
#minor-release
PiperOrigin-RevId: 426427334
This is a breaking change if the annotation itself is in use in Kotlin
code. It's judged that the IntDefs in this commit are unlikely to be
referred to often in Kotlin code. This is because they're either:
- Related to esoteric parts of the library, or
- In a common part of the library but only returned from methods (and
never passed to callback methods).
A follow-up change will fix the positions of existing usages to match
this new config.
#minor-release
PiperOrigin-RevId: 426410237
This is not backwards compatible if the @SelectionReason annotation is
used in Kotlin code, but before this change there aren't many library
surfaces that return a value annotated with @SelectionReason, so it
seems relatively unlikely that it is in use in any/many apps.
A follow-up change will fix the positions of existing usages to match
this new config.
#minor-release
PiperOrigin-RevId: 426409877
This is only used inside AudioFocusManager, it doesn't need to public.
Also mark it TYPE_USE and update the position to match.
#minor-release
PiperOrigin-RevId: 426407790
This is only used in DefaultAudioSink, so we could move it there and
make it private - but at that point we might as well refer to the
underlying AudioManager constants instead.
#minor-release
PiperOrigin-RevId: 426407661
Keep values related to LegacyPlayerView in attrs_legacy_player_view.xml
and put all values related to LegacyPlayerControlView back in their
original locations. We plan to remove LegacyPlayerView (and
attrs_legacy_player_view.xml) from media3, but will keep
LegacyPlayerControlView - so the separation of the XML files needs to
reflect this split.
#minor-release
PiperOrigin-RevId: 426406973
This only changes IntDefs that cannot be used by apps because they're
either private or package-private.
A follow-up change will fix the positions of existing usages to match
this new config.
#minor-release
PiperOrigin-RevId: 426372273
This makes the delegation model more explicit, and prevents the javadoc
compiler from just pulling in the Player javadoc automatically - which
can lead to some confusion when some method definitions in Player depend
on other methods (e.g. seekForward() is defined in terms of
getSeekForwardIncrement()).
Issue: google/ExoPlayer#9897
#minor-release
PiperOrigin-RevId: 426359004
These were messed up in 74c6ef9ba0
Also suppress deprecation warnings when we're just forwarding a
deprecated method to the delegate.
#minor-release
PiperOrigin-RevId: 426351791
The longer list of targets is only necessary for backwards
compatibility with existing Kotlin code that will stop compiling
if the position of the annotation becomes 'wrong' by marking it only
TYPE_USE. Since none of these IntDefs have been released (except in
media3 alpha1) we don't need to maintain this compatibility.
Also add a comment to all the places that *do* need the longer list of
targets, in order to explain why it's there and discourage copy-pasting
when defining new IntDefs in future.
Also fix some single-element arrays to remove the array notation.
#minor-release
PiperOrigin-RevId: 426108537
Remove most of the customisation documentation, since StyledPlayerView
isn't really designed to be customised as deeply as PlayerView.
Also remove most documentation around StyledPlayerControlView,
especially as a standalone controller class - since it doesn't work
well for this use-case.
#minor-release
PiperOrigin-RevId: 426090762
This allows the same DefaultMediaSourceFactory instance to be used as
the contentMediaSourceFactory inside
ImaServerSideAdInsertionMediaSource.
PiperOrigin-RevId: 425846609
This makes SimpleExoPlayer a simple forwarding wrapper which can be
removed in the future.
The changes are all purely mechanical with none of the potential further
simplifications made yet. The only exceptions are name clashes where
either EPI or SEP was calling a method in one of the classes and both
classes had different implementations for the same method name. In these
cases we needed to disambiguate between the two different
implementations (example: ExoPlayerImpl.setListener was renamed to
setEventListener).
#minor-release
PiperOrigin-RevId: 425823095
Tested by confirming transformations still work and write to a output file in a
scoped-storage directory on a:
* Nexus 6P API 23 emulator
* Google Pixel 4 API 31 physical device
PiperOrigin-RevId: 425644266
In some cases we create empty playback metrics with no corresponding
events (e.g. when an app seeks to a new media item and immediately
releases the player). There is no benefit in having completely empty
metrics entries, so it's cleaner to not report them in such cases.
#minor-release
PiperOrigin-RevId: 425609010
- Add a checkbox in the demo app to enable experimental HDR editing.
- Add an `experimental_` method to `TransformationRequest` to enable HDR editing.
- Add fragment/vertex shaders for the experimental HDR pipeline. The main difference compared to the existing shaders is that we sample from the decoder in YUV rather than RGB (because the YUV -> RGB conversion in the graphics driver is not precisely defined, so we need to do this to get consistent results), which requires the use of ES 3, and then do a crude YUV -> RGB conversion in the shader (ignoring the input color primaries for now).
- When HDR editing is enabled, we force using `FrameEditor` (no passthrough) to avoid the need to select another edit operation, and use the new shaders. The `EGLContext` and `EGLSurface` also need to be set up differently for this path.
PiperOrigin-RevId: 425570639
We use the `createForCodec` method that does not take a `MediaFormat` during
transformation, the error message always includes "no configured MediaFormat",
which is false.
PiperOrigin-RevId: 429553573
isTypeSupportedOrEmpty is very specific and a little hard to
understand unless you know the one thing it's useful for. This
commit replaces it with isTypeSupported, which can be used in
conjunction with the recently added containsType method.
PiperOrigin-RevId: 429312712
The track type is derived solely from the content. It does
not depend on any runtime properties such as the player's
capabilities of user track selection. Hence it belongs in
TrackGroup rather than TrackGroupInfo.
Note that this avoids TrackSelectionOverride from having to
re-derive the track type internally.
PiperOrigin-RevId: 429303312
Calling `MediaMuxer.writeSampleData` can block indefinitely on old API versions. It is better not to call this method to fail quickly with an exception rather than getting stuck.
Based on on-device testing media muxer doesn't generally handle out of order samples before API 25. There are a small number of devices where this does succeed but it seems preferable to turn this off everywhere to keep the code simple and have consistent behavior. Once we switch to in-app muxing this limitation will no longer apply.
#mse-bug-week
PiperOrigin-RevId: 429070255
Tested:
Verified that the additional information is available through
instrumentation tests, as well as via manual testing.
#mse-bug-week
PiperOrigin-RevId: 429038695
Create BitmapLoader component for loading artwork
images. Add the SimpleBitmapLoader which fetches images
from HTTP/HTTPS endpoints. Integrate BitmapLoader in
DefaultMediaNotificationProvider.
PiperOrigin-RevId: 429010249
- The resources were released twice before, which is not necessary since
the MSG_RELEASE message is already in the internal player queue.
- The demo app was failing because the stop watch was stopped in
onTransformationError after being reset.
#minor-release
#mse-bug-week
PiperOrigin-RevId: 428794426
We need TracksInfo.hasTracksOfType to determine which tabs to
display in TrackSelectionDialog.
We need TrackGroupInfo.isAdaptiveSupported to determine whether
to allow multiple selection (check boxes) or not (radio buttons).
PiperOrigin-RevId: 428793739
The GlFrameProcessor handles everything related to the GLSL program,
the FrameEditor manages the GL context and the data flow including
the input SurfaceTexture and output EGLSurface.
This will be split up further in follow-up CLs so that
GlFrameProcessors can be chained. At this CL, there are no
functional changes intended.
PiperOrigin-RevId: 428779179
Currently only a single instance of ImaServerSideAdInsertionMediaSource is
supported at the same time in a playlist. This change makes sure that an
attempt to add multiple instances is prevented by throwing a an exception.
#minor-release
PiperOrigin-RevId: 428743140
This change makes sure played server side ads are skipped in a single period
timeline. It avoids creating an ad-MediaPeriodInfo for played postrolls and
creates a content info instead. It also sets the end position for content infos
that terminate the stream before the stream is actually finished. This prevents
the player from continue playing the remaining media delivered by the
MediaPeriod.
We also make sure that the discontinuity of played ads are not reported because
there is actually no discontinuity.
#minor-release
PiperOrigin-RevId: 428734387
This prevents a stack trace that is shown in the logs when the stream manager is
released after the activity was stopped. In this case the call to
`streamManager.destroy()` coming from `releaseSourceInternal()` of the media
source is too late and produces an error saying `Application attempted to call on
a destroyed WebView`. The error has no effect but it's nice to not have this
stack trace in the logs.
PiperOrigin-RevId: 428574231
The last used shared media period is reused after all media periods have been
released. In case the sample streams are already filled up, they need to be
reset or they download samples from the current position up to the seek
position. This causes long buffering states or load stuck exceptions.
A seek when reusing the shared period takes care for reseting the period or
internally seeks to the current position in the already available samples.
#minor-release
PiperOrigin-RevId: 428484187
We have two ways to choose the minDurationForQualityIncreaseMs value in
AdaptiveTrackSelection: use the configured value for non-live or when
enough buffered data is available, or use a fraction of the available
duration to allow switching when playing close to the live edge.
The decision point when to use which value isn't quite consistent because
we compare against availableDurationUs before making the adjustments. This
means there is range of values where no up-switching is possible despite
perfect buffering. Fix this by choosing the minimum of both values.
Issue: google/ExoPlayer#9784
#minor-release
PiperOrigin-RevId: 428474332
The timeline used to map ad groups to periods needs to report the original content period duration without subtracting the serverside inserted ad duration. When marking played ads in onPositionDiscontinuity, the public timeline has been used which crashed the app when the ads media source is playing on a window index different to zero (in a playlist).
#minor-release
PiperOrigin-RevId: 428465833
Define MediaNotification.Provider so that apps can customize
notification UX. Move MediaNotificationManager's functionality
around notifications on DefaultMediaNotificationProvider
PiperOrigin-RevId: 428024699
Ignorable ad periods are skipped to resolve the media period id with the
ad playback state of the resulting period. In case of a change in the period
position un-played ad periods are rolled forward to be played.
PiperOrigin-RevId: 428011116
This adds some missing calls to verifyApplicationThread to
ExoPlayerImpl.
Now all public methods start with this call, except listener
registrations because registration after construction on a background
thread is allowed and supported.
PiperOrigin-RevId: 428009498
All the functionality of SimpleExoPlayer has moved to ExoPlayerImpl.
Hence, ExoPlayerImpl can fulfil its own name and become an ExoPlayer
implementation. As a result, ExoPlayer.Builder can return ExoPlayerImpl
directly without using SimpleExoPlayer at all.
#minor-release
PiperOrigin-RevId: 427947028
For when a track is both encrypted and has supplemental data, the sample size will be equal to `block sample size - encryption data size`.
PiperOrigin-RevId: 427807612
We have seen devices running on API21/23 fail transcoding because of setting
encoding profile/level.
Some devices (ale-123/nexus 7) on API21 returns ENOSYS (Function not
implemented) when being configured with a profile setting. (although API21
introduced the capability of setting encoding profile)
Some devices (nexus 5) on API23 fails configuration with a specific parameter
set, despite advertising support for it.
Not setting the baseline profile has no effect on encoding, because when not
set, the encoding will pick a suitable profile to use. Since baseline is
the lowest possible profile, the auto-picked value can't be worse than
baseline.
Ref: b/218696352
PiperOrigin-RevId: 427792124
On some Android devices, the return value of
```
MediaCodecInfo.getCapabilitiesForType(mimeType).profileLevels
```
contains one entry for each encoding profile, like <profile, maxSupportedLevel>
but on some other devices, there are multiple entries for the same profile,
like <HIGH_PROFILE, LEVEL1>, <HIGH_PROFILE, LEVEL2>, <HIGH_PROFILE, LEVEL3>,
where we need to iterate through all the entries and find the max.
PiperOrigin-RevId: 427727030
And also add a test that all Player.Listener events are forwarded
to AnalyticsListener.
The AnalyticsCollector also needlessly implemented
Video/AudioRendererEventListener, which is not needed because all of
the equivalent methods are called directly and never through the
interface.
#minor-release
PiperOrigin-RevId: 427478000
Right now, the option to build an IMA DAI URI programmatically is still
package-private. To simplify the process, we can remove the StreamRequest
wrapper and directly provide an URI builder.
The same class can provide some package-private helper methods to parse the
created URI.
#minor-release
PiperOrigin-RevId: 427445326
There are two sets of listeners in ExoPlayerImpl at the moment,
which can be merged together to use a single ListenerSet. This has
the added advantage that the events that were previously sent
through the ArraySet get additional guarantees provided by ListenerSet
(e.g. correct event ordering and onEvents triggered).
Also add missing constants for onEvents to ensure all Player.Listener
methods have an corresponding constant.
#minor-release
PiperOrigin-RevId: 427415349
Allow opusV2JNI to be built-for & included-in non-Android build targets by ifdef'ing out the liblog dependency. Also removed libz and libandroid dependencies.
PiperOrigin-RevId: 427269838
This brings listener invocations closer together and removes
unnecessary methods.
Also fixes a bug where a change in track selection parameters only
queued a callback but never flushed it to actually inform the
listeners.
#minor-release
PiperOrigin-RevId: 427201691
In some cases (whose where we previously used EventListener),
AnalyticsCollector is registered as a listener to receive updates,
in other cases it is called directly.
Avoid this inconsistent handling by registering it as normal listener
and removing all callbacks that are handled by the normal listener flow.
The remaining direct usages of AnalyticsCollector calls are those
callbacks that have no equivalent in Player.Listener.
#minor-release
PiperOrigin-RevId: 427201525
With this change, MediaCodecAudioRenderer always configures MediaCodec
with max output channels set to 99 on API 32+.
#minor-release
PiperOrigin-RevId: 427192801
SimpleExoPlayer used to register a listener on ExoPlayerImpl for
the old EventListener callbacks. Now both classes are merged, this is
no longer needed and should be removed in favor of calling methods
directly.
#minor-release
PiperOrigin-RevId: 427187875
We have logic to not immediately interrupt playback when an ad group
fails to load and instead let the current content play and transition
at the point where the ad group should have been.
This logic was broken by dcbdbe5341 because of one of the conditions
used MediaPeriodId.adGroupIndex, which is always -1 for content ids.
It still worked for the last ad group because the next ad group index
was C.INDEX_UNSET.
Fix the issue and amend the test that was meant to catch this to test
the ad failures for the last ad and previous ads.
Also fix the PositionInfo reported in such a case, which was also wrong.
Issue: google/ExoPlayer#9929
#minor-release
PiperOrigin-RevId: 427143223
*** Original commit ***
Rollback of 1521e50307
*** Original commit ***
Wire up MediaMetricsListener and add configuration to disable it.
The listener will automatically forward diagnostics info to the
Android platform. ExoPlayer.Builder gets a new setter that allows
to disable this feature if required.
#...
***
PiperOrigin-RevId: 427131438
*** Original commit ***
Rollback of d93b0093ae
*** Original commit ***
Move SimpleExoPlayer logic into ExoPlayerImpl
This makes SimpleExoPlayer a simple forwarding wrapper which can be
removed in the future.
The changes are all purely mechanical with none of the potential further
simplifications made yet...
***
PiperOrigin-RevId: 427131338
On some old devices, the encoding level needs to be set with the encoding
profile, but not on newer devices.
The profile/level override is applied by following
https://developer.android.com/guide/topics/media/sharing-video
PiperOrigin-RevId: 427008536
*** Original commit ***
Move SimpleExoPlayer logic into ExoPlayerImpl
This makes SimpleExoPlayer a simple forwarding wrapper which can be
removed in the future.
The changes are all purely mechanical with none of the potential further
simplifications made yet. The only exceptions are name clashes where
either EPI or SEP was calling a method in one of the classes and both
classes had different implementations for the same method name. In these
cases we needed to disambiguate between the two different
implementations (e
***
PiperOrigin-RevId: 426997821
*** Original commit ***
Wire up MediaMetricsListener and add configuration to disable it.
The listener will automatically forward diagnostics info to the
Android platform. ExoPlayer.Builder gets a new setter that allows
to disable this feature if required.
#minor-release
***
PiperOrigin-RevId: 426997342
Some strings didn't mention the context in which they are used
(for example as item in a list, or for accessibility). This makes it
harder for translators to choose the most appropriate translation and
grammar.
Also fix repeat and shuffle mode button accessibility descriptions to
indicate the action, not the current state.
PiperOrigin-RevId: 426924163
This ensures Kotlin usages of these IntDef annotations in the 'old'
position will continue to compile.
'Frequently used' is a subjective judgement. I have a parallel change
that marks all the other public IntDefs in the library as TYPE_USE
(those that I've judged to be 'rarely used' by apps).
A follow-up change will fix the positions of existing usages to be as if
they're only TYPE_USE.
#minor-release
PiperOrigin-RevId: 426427334
This is a breaking change if the annotation itself is in use in Kotlin
code. It's judged that the IntDefs in this commit are unlikely to be
referred to often in Kotlin code. This is because they're either:
- Related to esoteric parts of the library, or
- In a common part of the library but only returned from methods (and
never passed to callback methods).
A follow-up change will fix the positions of existing usages to match
this new config.
#minor-release
PiperOrigin-RevId: 426410237
This is not backwards compatible if the @SelectionReason annotation is
used in Kotlin code, but before this change there aren't many library
surfaces that return a value annotated with @SelectionReason, so it
seems relatively unlikely that it is in use in any/many apps.
A follow-up change will fix the positions of existing usages to match
this new config.
#minor-release
PiperOrigin-RevId: 426409877
This is only used inside AudioFocusManager, it doesn't need to public.
Also mark it TYPE_USE and update the position to match.
#minor-release
PiperOrigin-RevId: 426407790
This is only used in DefaultAudioSink, so we could move it there and
make it private - but at that point we might as well refer to the
underlying AudioManager constants instead.
#minor-release
PiperOrigin-RevId: 426407661
Keep values related to LegacyPlayerView in attrs_legacy_player_view.xml
and put all values related to LegacyPlayerControlView back in their
original locations. We plan to remove LegacyPlayerView (and
attrs_legacy_player_view.xml) from media3, but will keep
LegacyPlayerControlView - so the separation of the XML files needs to
reflect this split.
#minor-release
PiperOrigin-RevId: 426406973
Fallback is only disabled for robolectric and instrumentation tests.
For MH tests, fallback is not disabled, as it may be needed due to
the broad range of devices available.
PiperOrigin-RevId: 426403167
This only changes IntDefs that cannot be used by apps because they're
either private or package-private.
A follow-up change will fix the positions of existing usages to match
this new config.
#minor-release
PiperOrigin-RevId: 426372273
Reason for not rolling back the rollback d68b790077: file name changed and
file content moved, the automated tool is unable to correctly apply the change.
Apply suggested AVC profile depending on the API version.
Use `AVCProfileHigh` only when there's encoder support.
PiperOrigin-RevId: 426363780
This makes the delegation model more explicit, and prevents the javadoc
compiler from just pulling in the Player javadoc automatically - which
can lead to some confusion when some method definitions in Player depend
on other methods (e.g. seekForward() is defined in terms of
getSeekForwardIncrement()).
Issue: google/ExoPlayer#9897
#minor-release
PiperOrigin-RevId: 426359004
These were messed up in 74c6ef9ba0
Also suppress deprecation warnings when we're just forwarding a
deprecated method to the delegate.
#minor-release
PiperOrigin-RevId: 426351791
This change makes GlUtil.Program an outer class named GlProgram,
and also moves private static helpers as well as the inner classes
Attribute and Uniform which were only used by GlUtil.Program to
GlProgram. Other static utility methods remain in GlUtil.
No functional changes intended.
PiperOrigin-RevId: 426119299
The longer list of targets is only necessary for backwards
compatibility with existing Kotlin code that will stop compiling
if the position of the annotation becomes 'wrong' by marking it only
TYPE_USE. Since none of these IntDefs have been released (except in
media3 alpha1) we don't need to maintain this compatibility.
Also add a comment to all the places that *do* need the longer list of
targets, in order to explain why it's there and discourage copy-pasting
when defining new IntDefs in future.
Also fix some single-element arrays to remove the array notation.
#minor-release
PiperOrigin-RevId: 426108537
The listener will automatically forward diagnostics info to the
Android platform. ExoPlayer.Builder gets a new setter that allows
to disable this feature if required.
#minor-release
PiperOrigin-RevId: 426099872
Remove most of the customisation documentation, since StyledPlayerView
isn't really designed to be customised as deeply as PlayerView.
Also remove most documentation around StyledPlayerControlView,
especially as a standalone controller class - since it doesn't work
well for this use-case.
#minor-release
PiperOrigin-RevId: 426090762
- The MIME type should ideally default to HEVC if there is an encoder for it.
- Next, check if AVC is supported.
- If there is no encoder for AVC, then we should pick an encoder in the list of
existing encoders instead of abandoning the transformation.
PiperOrigin-RevId: 425900638
This allows the same DefaultMediaSourceFactory instance to be used as
the contentMediaSourceFactory inside
ImaServerSideAdInsertionMediaSource.
PiperOrigin-RevId: 425846609
This makes SimpleExoPlayer a simple forwarding wrapper which can be
removed in the future.
The changes are all purely mechanical with none of the potential further
simplifications made yet. The only exceptions are name clashes where
either EPI or SEP was calling a method in one of the classes and both
classes had different implementations for the same method name. In these
cases we needed to disambiguate between the two different
implementations (example: ExoPlayerImpl.setListener was renamed to
setEventListener).
#minor-release
PiperOrigin-RevId: 425823095
Tested by confirming transformations still work and write to a output file in a
scoped-storage directory on a:
* Nexus 6P API 23 emulator
* Google Pixel 4 API 31 physical device
PiperOrigin-RevId: 425644266
In some cases we create empty playback metrics with no corresponding
events (e.g. when an app seeks to a new media item and immediately
releases the player). There is no benefit in having completely empty
metrics entries, so it's cleaner to not report them in such cases.
#minor-release
PiperOrigin-RevId: 425609010
- Add a checkbox in the demo app to enable experimental HDR editing.
- Add an `experimental_` method to `TransformationRequest` to enable HDR editing.
- Add fragment/vertex shaders for the experimental HDR pipeline. The main difference compared to the existing shaders is that we sample from the decoder in YUV rather than RGB (because the YUV -> RGB conversion in the graphics driver is not precisely defined, so we need to do this to get consistent results), which requires the use of ES 3, and then do a crude YUV -> RGB conversion in the shader (ignoring the input color primaries for now).
- When HDR editing is enabled, we force using `FrameEditor` (no passthrough) to avoid the need to select another edit operation, and use the new shaders. The `EGLContext` and `EGLSurface` also need to be set up differently for this path.
PiperOrigin-RevId: 425570639
TransformerTest sounds like a unit test for Transformer but these
tests test behaviour that involves multiple stages of the pipeline.
PiperOrigin-RevId: 425378369
Add a constructor that takes a DrmSessionManagerProvider.
This allows R8 to strip the default implementation.
#minor-release
PiperOrigin-RevId: 425330083
Some phone with limited memory can't allocate bigger
shared memory buffers.
This might or might not be related to Binder's 1M
transaction limit.
Tested on Pixel 4 by setting the minimum buffer size to
1h.
https://github.com/google/ExoPlayer/issues/9712
#minor-release
PiperOrigin-RevId: 425324536
This makes sure the number of ads in an ad group matches to the number of periods representing an ad group in a multi-period timeline. This makes it easier to accurately mark ads as played in multi-period windows which is needed to correctly prevent seeking over unplayed ads.
PiperOrigin-RevId: 425317085
If
a) the end of stream buffer arrives with a frame rather than an
empty buffer or
b) processDataV29() renders several decoder output buffers to the
FrameEditor's input Surface immediately before encountering the
EOS flag
these frames were previously stuck in the FrameEditor's input Surface
and never fed to the encoder.
PiperOrigin-RevId: 424898820
This test tests that all frames are processed when transcoding
video to a different sample MIME type (and that the transformation
completes successfully).
PiperOrigin-RevId: 424896014
When the media3 modules are referred from an external project and
gradle.ext.androidxMediaModulePrefix is specified, build error occurs
like the following.
> gradle.ext.androidxMediaModulePrefix = "media-"
> A problem occurred evaluating project ':media-lib-common'.
> > Project with path ':media-media-lib-cast' could not be found in project ':media-lib-common'.
As you can see, the build script of the common module is trying to
use an incorrect named project which has duplicated prefixes.
Enforcing the correct thread usage has been enabled since 2.13.0.
Opting-out of this enforement is dangerous as it can hide very hard
to debug bugs.
PiperOrigin-RevId: 424815808
If muxerWrapper.release() was throwing an exception, the progress state
was not updated and getProgress could throw an exception.
#minor-release
PiperOrigin-RevId: 424696783
When the decoder output buffer was partially read, a call to
Codec.getOutputBuffer() was returning the same buffer, but with the
position reset to 0. The reason was that, in
Codec.maybeDequeueAndSetOutputBuffer(), mediaCodec.getOutputBuffer()
was called with the same buffer index (L350 in old rev), even though
there was already a buffer available (outputBufferIndex >=0). This
change avoids calling mediaCodec.getOutputBuffer() if the previous
buffer has not been released.
#minor-release
PiperOrigin-RevId: 424612197
If the encoder picks a fallback resolution the video pipeline needs
to take this into account when configuring the frameEditor and when
setting up the fallback TransformationRequest that's passed to the
fallbackListener.
PiperOrigin-RevId: 424611290
Move the code in its own class as DefaultAudioTrack
is getting very big. It also help for testability.
The new class is easily configurable and highly tested.
Manual test was used to catch any regression.
https://github.com/google/ExoPlayer/issues/8891
PiperOrigin-RevId: 424602011
AnalyticsCollector can't be null when passed into ExoPlayerImplInternal,
so there is no need to pass it around as nullable.
PiperOrigin-RevId: 424594031
Two of the sessions are finished at the same time in the test
and the order of the corresponding callbacks depends on the randomly
generated session string and the order these strings are stored in a
HashSet.
Update test to assert both callbacks are called and they contain the
right arguments, but don't assert on the order of these two callbacks.
PiperOrigin-RevId: 424548819
Ad playback shouldn't be affected by manual speed adjustments set
by the user. This change enforces unit speed for ad playback.
Issue: google/ExoPlayer#9018
PiperOrigin-RevId: 424546258
This only affects playbacks using the
experimentalUseProgressiveMediaSourceForSubtitles method.
Also update the SingleSampleMediaSource instantiation to be more
similar, to try and highlight differences like this in future.
PiperOrigin-RevId: 424545980
In some cases we need to update the PlaybackParameters at period
boundaries, for example when switching from live to VOD and live
playback speed adjustment was still active at the point of switching.
Currently, we send the update when the playing MediaPeriod changes in
EPII, which is slightly too late because the new speed gets only applied
after the entire existing AudioTrack buffer has been played out.
We can time the update slightly better by updating the values at the
point where we change the reading period. This makes the update slightly
too early because it also applies to all samples currently in the
decoder. But generally, this is a lot better because the time spent
in the decoder is likely to be considerably lower than the duration of
the AudioTrack buffer.
Note that this change isn't perfectly aligning to the period boundary,
but reduces the number of samples with the wrong speed to a minimum.
If we are getting around to add additional code that allows updating
the speed at exactly the boundary, it also needs to be triggered from
the reading period update, so the new code location is also helpful in
the future.
Issue: google/ExoPlayer#9018
PiperOrigin-RevId: 424540551
* @CryptoType is a TYPE_USE annotation, so should appear after modifiers and directly before the type.
(see go/java-style#s4.8.5-annotations)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if the change looks generally problematic.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 423821355
Issue: google/ExoPlayer#9775
We got a few issues for this on GH already. Some RTSP servers do not provide
track timing in PLAY responses, or the timings are invalid.
Missing timing means the RTSP stream is not seekable. Added method to
1. Update the timeline that seek is not possible
2. Report read discontinuity so that playback can start from the beginning.
PiperOrigin-RevId: 423281439
If the output sample MIME type is inferred from the input
but is not supported by the muxer, we fallback to transcoding
to a supported sample MIME type.
The audio and video renderers need to make sure not to select the PassthroughSamplePipeline for this case. Which sample MIME type
to choose is decided by the EncoderFactory.
PiperOrigin-RevId: 423272812
To avoid the `MediaPeriodQueue`to discard the reading period, we can set the next ad of an ad group early and then (possibly) only change it's duration once we receive the actual duration. This way we avoid a rebuffering as a result of the reading period being discarded.
The change also takes care to properly set ad break and their durations when we join the live stream at the moment when an ad is playing.
PiperOrigin-RevId: 423163467
We currently only end sessions on Timeline updates if the associated media
is no longer in the playlist. But we should also end all sessions that are
finished as a result of the timeline update (similar to how this is done for
discontinuities). This issue was introduced by 394ab7bcfd
PiperOrigin-RevId: 423075855
We currently don't check which session is causing a network transfer
(it could be a preloaded item in a playlist). To clearly associate
network transfer data with sessions, we need to keep track of
transferred bytes and transfer time per session.
PiperOrigin-RevId: 422867845
We may fall back to a different sample MIME type because
a) the sample MIME type inferred from the input is not supported
by the muxer or b) no encoders are available for the the requested
sample MIME type.
PiperOrigin-RevId: 422849036
With this change, the MediaCodecAudioRenderer configures the MediaCodec
to not downmix audio only if spatialization can be applied. This way,
decoders who are downmixing by default are left doing so when
spatialization cannot be applied. The renderer re-initializes the codec
when spatialization properties change mid-playback.
PiperOrigin-RevId: 422822952
TransformationRequest is otherwise immutable, so if we modify the
transformationMatrix in place (done before this cl) this may cause
confusing behaviour for apps when they reuse a TransformationRequest.
PiperOrigin-RevId: 422822916
Currently, we keep the values for dropped/played frames, audio underruns
and current formats from the last session, causing double reporting
of counters and wrong track change reasons for formats. All these
values should be reset when the active session is finished, so that the
new session can start from scratch.
PiperOrigin-RevId: 422798406
This change closes an edge case when an app is connecting a controller to a session that is already playing. In such a case `MediaControllerImplBase.getContentPosition()` keeps returning the first estimation for every call until `playWhenReady` changes for the first time.
Reproduction: Launch the demo-session app and start audio playback. Put the activity to the background and then to the foreground again. Go to the playlist view and `PlayerActivity` without interrupting playback and try to seek in the timebar. The position is stuck and snaps back.
PiperOrigin-RevId: 422795360
Currently, we always end the current session if onSessionFinished is
called. However, the finished session may not be the active one (for
example when discarding prebuffered items in a playlist). To make this
code more robust, we can save the active session id explicitly and only
end this session.
PiperOrigin-RevId: 422788542
After implementing fallback, it won't always be possible to
differentiate between muxer and encoder as the cause of an output
format not being supported.
PiperOrigin-RevId: 422780443
This change adds more standard metadata fields to Cast metadata including the artwork URL that makes the cast device show the artwork in the Cast route dialog (https://screenshot.googleplex.com/uj4n4Jqd7it9bob) and the Cast device.
This change also discriminates between media with an audio MIME type and others. For audio MIME type the Cast metadata is set to MEDIA_TYPE_MUSIC_TRACK which changes the layout and shows artwork and additional audio meta data to be displayed (https://screenshot.googleplex.com/ASy3KDcsTdJDM2T).
Issue: google/ExoPlayer#9663
PiperOrigin-RevId: 422589957
This change enables the ImaServerSideAdInsertionMediaSource for multi-period content. The global ad playback state is split into pieces for each period and the window and period durations are calculated accordingly in the ServerSideAdInsertionTimeline.
For multi-period live content (DASH), the ad playback state is not set with this change. This is deferred to a follow up CL. Splitting is very tricky. For each timeline update the windowStartTimeUs may vary for some milliseconds relative to the start of the period.positionInWindowUs. This requires to either introduce some fuzzy logic or to choose a different approach than for multi-period VOD. Because mistakes within the playback states of subsequent moving live windows produces crashes, it seems sensible to defer this for now and keep this change in a separate future CL (unblock further work, easy to rollback).
In this state, live DASH stream are working and the ad overlay is placed over the player correctly bu the SDK. However, ads are not reported by the position discontinuity event. Similarly, the player.isPlayingAd() does never returns true when a ad period is playing.
PiperOrigin-RevId: 422539770
