Media button event coming from the `MediaSessionService` are delegated
to the `MediaSessionImpl` and then sent to the session by using the
`MediaSessionStub` directly instead of using the `MediaController`
API.
Splitting the `MediaController.Listener` and `Player.Listener` in
`MediaNotificationManager` got reverted, and both listener are set to the
controller as before. This reverts the change that introduced a
different timing behaviour. It still holds, that a listener
registered on a `MediaController` that calls a method like `play()` is
called immediately and before the call has arrived at the player. This
change works around this behaviour from the library side by calling
`MediaSessionStub` directly with a `ControllerInfo`.
#minor-release
PiperOrigin-RevId: 573918850
I couldn't work out a good way to set up a test environment with
an asset in a different package, so I'm not adding a test for the
package overriding.
PiperOrigin-RevId: 573843326
Android Auto shows a queue button when the queue is not empty.
Apps were able to remove this queue button with the legacy API
by not setting the queue of the session.
After this change, removing `COMMAND_GET_TIMELINE` from the commands
of the media notification controller or the session player sets the
queue in the platform session to null.
#minor-release
Issue: androidx/media#339
PiperOrigin-RevId: 573813558
This is the documented format of this URI. The previous test was
exercising an undocumented format. Support for the previous format is
kept (and documented) because it seems to be relatively common (despite
the package name not being needed or used).
PiperOrigin-RevId: 573756190
Previously, we calculated the next playlist reload time by adding the target duration (or half of it, depending on whether there is a real update in the new playlist snapshot) from the last load completion time, which makes the reload interval as long as `targetDuration(or half of it) + lastLoadDuration`. While still complying to the standard that "the client MUST wait for at least the target duration before attempting to reload the Playlist file again", this could cause buffering when the playback position is close to the end of live window. This change is to calculate the reload interval accurately by not adding the term `lastLoadDuration`.
Issue: androidx/media#663
#minor-release
PiperOrigin-RevId: 573300009
All production and test callers of the non-incremental methods are
already migrated, so we can remove them in this change too.
#minor-release
PiperOrigin-RevId: 573207318
If the `Subtitle` has 'active' cues at `OutputOptions.startTimeUs`, this
change ensures these are emitted in a `CuesWithTiming` with
`CuesWithTiming.startTimeUs = OutputOptions.startTimeUs`. If
`OutputOptions.outputAllCues` is also set, then another `CuesWithTiming`
is emitted at the end that covers the 'first part' of the active cues,
and ends at `OutputOptions.startTimeUs`.
As well as adding some more tests to `LegacySubtitleUtilWebvttTest`,
this change also adds more tests for `TtmlParser` handling of
`OutputOptions`, which transitively tests the behaviour of
`LegacySubtitleUtil`.
#minor-release
PiperOrigin-RevId: 573151016
All the production code is already calling these new incremental
methods, migrating the tests allows us to remove the old
`List`-returning methods in a follow-up change.
#minor-release
PiperOrigin-RevId: 572822828
PlayerInfo bundling is costly and we can add a shortcut for
in-process binder calls where we store the direct object
reference in a live Binder object that can be written to the
Bundle instead of the individual data fields.
#minor-release
PiperOrigin-RevId: 572816784
A few methods in PlayerInfo and related classes combine filtering
information with bundling in one method. This makes it impossible
to use just the filtering for example and it's also easier to reason
about than two dedicated methods. This change splits these methods
into two parts accordingly.
PiperOrigin-RevId: 572592458
When the controller of the `MediaNotificationManager` is disconnected,
the session is removed from the service without checking whether the
session hasn't already been removed. This caused flakiness in `MediaSessionServiceTest.addSession()`.
Because there is a public API `MediaSessionService.removeSession()`,
the controller can't make an assumption whether the session is still
contained in the service when being disconnected.
#minor-release
PiperOrigin-RevId: 572568350
Looping through all MIME types is a bit hacky, but seems like a nice way
to check "all" MIME types (or at least more than a random selection).
PiperOrigin-RevId: 572508027
This currently only applies to subtitles muxed into mp4 segments, and
not standalone text files linked directly from the manifest.
Issue: androidx/media#288
#minor-release
PiperOrigin-RevId: 572263764
Interrupting the main thread in particular may be dangerous
as the flag is not cleared after handling the current message.
#minor-release
PiperOrigin-RevId: 572259422
This gives access to the replacement behavior for a particular subtitle
format without needing to instantiate a `SubtitleParser`.
#minor-release
PiperOrigin-RevId: 572226084
In particular:
- Add allowAudioNonSeamlessAdaptiveness parameter (default true, same
as video and as already implemented by default)
- Forward mixedMimeTypeAdaptation support to AudioTrackScore
(as for VideoTrackScore) and adapt mixed MIME type adaptive
support accordingly
- Check adaptive support when deciding whether a track is allowed for
adaptation (also same check as for video). This takes the new
parameter into account.
#minor-release
PiperOrigin-RevId: 572191308
When used within the same process, we don't have to go via the
onTransact method (which includes marshalling and unmarhsalling
the data), but can directly return the list.
#minor-release
PiperOrigin-RevId: 572179846
Future.isDone and getDone doesn't imply the Future was successful
and it may have been cancelled or failed.
In case where we handle failure, we should also handle cancellation
to avoid CancellationException to bubble up unchecked.
In demo app code where we use isDone for field initialization, we
want to crash in the failure case (usually security exception where
the connection is disallowed), but we want to gracefully handle
cancellation. Cancellation of these variables usually happens in
Activity.onDestroy/onStop, but methods may be called after this point.
#minor-release
PiperOrigin-RevId: 572178018
With this change the playback will resume as soon as the suitable device is connected and suppression reason is cleared (within set time out).
#minor-release
PiperOrigin-RevId: 572140309
After 4fad529433, MediaCodecVideoRenderer does not report if frames
are dropped from the VideoSink. This commit fixes this.
#minor-release
PiperOrigin-RevId: 571905721
This is more correct, though in reality all text-based subtitles handled
by `SubtitleExtractor` are implemented with MERGE behavior in media3.
PiperOrigin-RevId: 571888573
Alters RTSP KeepAlive monitor test to just make sure that keep-alive message is sent.
The test was added in 42c1846984
#minor-release
PiperOrigin-RevId: 571349013
In some streaming scenarios, like offload, the sink may finish writing buffers a bit before playback reaches the end of the track. In this case a player may pause while in this 'stopping' state.
The AudioTrackPositionTracker needs to update the cached values it uses to calculate position in the `PLAYSTATE_STOPPED`/`PLAYSTATE_STOPPING` states if pause/play are called during this period.
PiperOrigin-RevId: 571345914
In offload mode, `AudioTrack#stop()` will put the track in `PLAYSTATE_STOPPING` rather than `PLAYSTATE_STOPPED`. The difference in state means that `AudioTrack` can be paused and played during this 'stopping' period.
Currently, if `AudioTrackPositionTracker#handleEndOfStream()` has been called then `DefaultAudioSink` in `pause()` won't call `AudioTrack#pause()`. `AudioTrack#pause()` should be called in this case if in offload mode.
#minor-release
PiperOrigin-RevId: 571335108
This belongs in the resolver, because it depends on the resolution
algorithm (and therefore the logic can't live in `TextRenderer`).
This also fixes a bug in `TextRenderer` where we were doing arithmetic
with `cues.durationUs` without checking if it was `TIME_UNSET` first.
#minor-release
PiperOrigin-RevId: 571332750
The flag is no longer used by our components and only set and checked
in a few places to guarantee compatiblity with existing renderers and
decoders that still use it.
The flag will be removed in the future due to its design limitations.
#minor-release
PiperOrigin-RevId: 571291168
The existing `Subtitle` handling code is left intact to support the
legacy post-`SampleQueue` decoding path for now.
This also includes full support for merging overlapping `CuesWithTiming`
instances, which explains the test dump file changes, and which should
resolve the following issues (if used with the
decoder-before-`SampleQueue` subtitle logic added in
5d453fcf37):
* Issue: google/ExoPlayer#10295
* Issue: google/ExoPlayer#4794
It should also help resolve Issue: androidx/media#288, but that will also require
some changes in the DASH module to enable pre-`SampleQueue` subtitle
parsing (which should happen soon).
#minor-release
PiperOrigin-RevId: 571021417
The aim of this test is to make sure the image is onscreen for the right amount of time, so to drive down flakes from the decoder taking too long, change this to an atLeast check
#minor-release
PiperOrigin-RevId: 570988044
location and index are mostly equivalent, except that it's possible that location is more up-to-date than index, so we can just always use location.
PiperOrigin-RevId: 570950407
Set KeepAliveMonitor to send a keep-alive message at half the timeout value, if provided, by the RTSP Setup response.
Issue: androidx/media#662
PiperOrigin-RevId: 570946237
In most cases this is more useful than `durationUs`.
We will keep `durationUs`, and the constructor will continue to take
`startTimeUs` and `durationUs`, to allow for use-cases where we don't
know the start time but still want to indicate a duration (this will be
used to implement CEA-608 timeout).
#minor-release
PiperOrigin-RevId: 570944449
Much simpler than ExternalTextureManager flushing, because
ExternalTextureManager complexity is due to decoder race condition behavior,
which we won't see for Bitmaps due to a more well-defined interface.
This is needed to test texture output flushing.
PiperOrigin-RevId: 570896363
This gets rid of the reliance on the decode only flag that is still
set on input buffers to the decoder if they are less than the start
time.
We still need to set and check the decode-only flag in SimpleDecoder
to ensure compatbility with custom decoders that use the flag while
it's not fully removed.
PiperOrigin-RevId: 570736692
The interface requires the implementation to return null if the
decode-only flag is set. So instead of setting the flag and returning
null, we can simply not call the method and assume it's null.
The only reason where this wouldn't work is if the metadata format
has keyframe-like logic and requires previous metadata to decode
the next one. This is not something we came across before and it seems
ignorable. If that feature is needed in the future, we should instead
add a method to MetadataDecoder to set the first output timestamp.
#minor-release
PiperOrigin-RevId: 570399838
While sleeping for offload, position is estimated based on time playing. If asleep and AudioTrack is reused, then the position will keep incrementing as the subsequent item plays. That is until wakeup when playing position is updated to the timestamp of the second item. Offload scheduling should be disabled until track transitions fully.
PiperOrigin-RevId: 570397140
The test is hidden behind the Ignore annotation due to some flakiness just like `webvttInMp4`. However, it will be removed when the subtitle parsing is moved to a pre-sample-queue architecture.
#minor-release
PiperOrigin-RevId: 570376275
In some cases, SimpleDecoder output needs to be skipped for rendering
because the decoder produces no data. This is one of the remaining
usages of BUFFER_FLAG_DECODE_ONLY at the moment and can be more
directly solved without using the flag. SimpleDecoder still needs to
check the flag though for backwards compatbility with custom decoders
while the flag is not completely removed.
PiperOrigin-RevId: 570345233
