They are called from the system only and don't need to be exported
to be visible to other apps.
PiperOrigin-RevId: 489210264
(cherry picked from commit c1fd03df74)
The method allows clients to specify a pre-existing thread
to use for playback. This can be used to run multiple ExoPlayer
instances on the same playback thread.
PiperOrigin-RevId: 488980749
(cherry picked from commit 79b809b556)
Added new method to check if codec just functionally supports a format. Changed getDecoderInfosSortedByFormatSupport to use new function to order by functional support. This allows decoders that only support functionally and are more preferred by the MediaCodecSelector to keep their preferred position in the sorted list.
UnitTests included
-Two MediaCodecVideoRenderer tests that verify hw vs sw does not have an effect on sort of the decoder list, it is only based on functional support
Issue: google/ExoPlayer#10604
PiperOrigin-RevId: 487779284
(cherry picked from commit 1eb8a6b36e)
This tag is only understood by Dackka, which is used to generate the media3 javadoc.
PiperOrigin-RevId: 489233200
(cherry picked from commit 058cba95d4)
This better matches the callback name (onSurfaceSizeChanged) and
probably cause less confusion with getVideoSize.
PiperOrigin-RevId: 488669786
(cherry picked from commit 8438daca1f)
Util.getAudioTrackChannelConfig() maps a channel count to a
channel mask that is passed to AudioTrack. The method expected that
playback of 8-channel audio is possible from Android 5.1 and playback of
12-channel audio is only possible from Android 12L. However, there is no
restriction on the upper number of channels that can be passed to the
AudioTrack. google/ExoPlayer#10701 is an example where the audio decoder
outputs 12 channels on an Android 10.
This change removes the restrictions for 8 and 12 channels. Note, we still
do not support playback of arbitrary number of channels as it would require
further changes to DefaultAudioSink.
#minor-release
Issue: google/ExoPlayer#10701
PiperOrigin-RevId: 488659831
(cherry picked from commit 1b24e6fd14)
When we currently trigger the iteration finished event during the
release, we don't mark the event as triggered. This means that
someone can trigger another release from within the callback,
which then tries to resend the event.
Issue: google/ExoPlayer#10758
#minor-release
PiperOrigin-RevId: 488645089
(cherry picked from commit 3e5103a3e5)
We currently skip this calculation entirely, but it can be added by
calculating the window duration using the wrapped window's duration
and the provided AdPlaybackState.
Issue: google/ExoPlayer#10764
PiperOrigin-RevId: 488614767
(cherry picked from commit 20151b9930)
It's not clear to me why presubmit didn't catch this, I briefly
investigated but couldn't work it out - so I'm just going to fix
it and move on.
#minor-release
PiperOrigin-RevId: 487497827
(cherry picked from commit 13ee34facc)
This makes two fixes:
1. Remove `HlsSampleStreamWrapper.Callback` (package-private) from the
list of interfaces implemented by `HlsMediaPeriod` (`public`) and
move the implementation to a private inner class instead. This avoids
Metalava complaining about a public class that inherits from a
package-private type.
2. Reduce the visibility of
`RtpPayloadFormat.isFormatSupported(MediaDescription)` from `public`
to package-private. The `MediaDescription` type is already
package-private, so this method was already unusable outside the
package.
#minor-release
PiperOrigin-RevId: 487472781
(cherry picked from commit 9041d7b979)
This makes two types of fix:
1. Align parameter names on overridden methods where the superclass
has `@param` javadoc.
2. Use `@hide` on `protected final` methods that refer to package-private
types. This will hide these symbols from Dackka javadoc generation
but not (currently) from the artefacts distributed on Maven. These
methods are currently unusable outside their package anyway (e.g. by
external developers) because of the dependency on a package-private
type.
This also changes some HLS, SmoothStreaming, and IMA code where I've renamed
parameters of overridden methods to be consistent across the type
hierarchy.
#minor-release
PiperOrigin-RevId: 487472665
(cherry picked from commit 10c4a4dfc1)
Not setting the color info results in a missing "colr" box in the produced
container, under file/moov/trak/mdia/minf/stbl/stsd/hvc1. This means extractors
will not be able to find out the transcoded file is HDR.
In `Transformer`, this means it can't transcode this transcoded file, because
it currently relies on the container bearing HDR info to construct the
transcoding sample pipeline.
PiperOrigin-RevId: 487276712
(cherry picked from commit d6c8e3a8af)
In startTransformation method we were throwing UnsupportedEncodingException (IOException) when mediaItem with unsupported arguments is passed.
Changed this to IllegalArgumentException which seems more logical here.
PiperOrigin-RevId: 487259296
(cherry picked from commit 4598cc9248)
This logic is currently in the player renderers. With multi-asset, the
renderers will go into the AssetLoader, which shouldn't be responsible
for muxing.
PiperOrigin-RevId: 486860502
(cherry picked from commit d8754b6642)
Problem: We are initialising muxer as soon as we start the transformation. Now the startTransformation() method can be called from main thread, but muxer creation is an I/O operation and should be not be done on main thread.
Solution: Added lazy initialisation of muxer object. The actual transformation happens on background thread so the muxer will be initialised lazily from background thread only.
Another way was to provide an initialize() method on MuxerWrapper which will explicitly initialise muxer object but with this approach the caller need to call the initialise method before calling anything else. With current implementation the renderers are calling MuxerWrapper methods on various callbacks (Not sequentially) and also we are sharing same muxer with multiple renderers so It might become confusing for the caller on when to call the initialise() method. Also there are few methods on MuxerWrapper which dont really need muxer object. So in short it might make MuxerWrapper APIs more confusing.
Validation: Verified the transformation from demo app.
PiperOrigin-RevId: 486735787
(cherry picked from commit b10b4e6d46)
This should be necessary to ensure decoders see fewer errors.
Setting this resulted in removing native_dequeueOutputBuffer errors on OMX.MTK decoders for in-app tone mapping prototyping.
PiperOrigin-RevId: 486715941
(cherry picked from commit 0b7e5bbad2)
If there's an @param javadoc tag in a supertype then all overrides
of this method that don't also override the javadoc must use the same
parameter name.
PiperOrigin-RevId: 485857711
(cherry picked from commit b8e5d708fc)
Public methods may only refer to public types in their signature. This
change ensures that by switching to a public supertype everywhere.
PiperOrigin-RevId: 485568625
(cherry picked from commit 3fdfe585ff)
This change makes adding ad events in live streams more robust by allowing ad
groups to grow in number of ads if more ad events are received than initially
announced by the SDK.
With the IMA prefetch feature, an AdPod can grow in size in certain conditions
like from initially 2 ads to 4 ads being part of the ad group. With this change,
if an additional ad event arrives while the ad group is still being played,
the ad group is expanded. If the event arrives late and the ad group is already
completed, a new group is created for the remaining ads.
This also covers the case where we join the live stream while an ad is being
played and we missed at least one LOADED event from the SDK. Ads of the group
before the first LOADED event are ignored in such a case.
PiperOrigin-RevId: 484214760
(cherry picked from commit 136addf640)
From ANSI-CTA-608-E R-2014 section 8.4:
> When closed captioning is used on line 21, field 2, it shall conform
> to all of the applicable specifications and recommended practices as
> defined for field 1 services with the following differences:
> 1. The non-printing character of the miscellaneous control-character
> pairs that fall in the range of 0x14, 0x20 to 0x14, 0x2F in field 1,
> shall be replaced with 0x15, 0x20 to 0x15, 0x2F when used in field
> 2.
> 2. The non-printing character of the miscellaneous control-character
> pairs that fall in the range of 0x1C, 0x20 to 0x1C, 0x2F in field
> 1, shall be replaced with 0x1D, 0x20 to 0x1D, 0x2F when used in
> field 2.
This basically means that `cc1=0x15` in field 2 should be interpreted as
`cc1=0x14` in field 1, and same for `0x1D -> 0x1C`.
The `isMiscCode` method above already handles this by ignoring the LSB
(the only difference between `0x14` and `0x15`, and `0x1C` and `0x1D`)
by AND-ing with `0xF6` instead of `0xF7`. This change uses the same
trick in `isServiceSwitchCommand`.
Issue: google/ExoPlayer#10666
#minor-release
PiperOrigin-RevId: 483927506
(cherry picked from commit 7c6d492ff1)
Split inner interface into separate file, which will go in common
module. The old interface will be deprecated and extends the new.
#cleanup
PiperOrigin-RevId: 483732226
(cherry picked from commit ad52b68c73)
This is a no-op, but it's more 'correct' because it avoids any potential
sign mix-ups that come from storing an unsigned byte (with a
potentially set MSB) in a signed java byte variable.
PiperOrigin-RevId: 483409798
(cherry picked from commit 3d0f43a149)
Although it can be useful to check the output format, it's not required or needed.
For some AudioProcessor implementations, it is stated/obvious that
the output format will match the input, in which case there is no
a need to check the return value.
#cleanup
PiperOrigin-RevId: 483403679
(cherry picked from commit a7bfa12eec)
This listener will need to be passed to the MuxerWrapper to throw when
the Transformer is stuck.
PiperOrigin-RevId: 482433552
(cherry picked from commit e3f28421fd)
Make it easier to support use of RGBA_101012 rather than RGBA_8888 for EGL
contexts, displays, and surfaces.
This tangentially supports adding HDR tests, by slightly simplifying the color
selection logic we'd have to add in HDR tests.
PiperOrigin-RevId: 482219428
(cherry picked from commit 9e1adee4cb)
The reason for making the Muxer public is that we want to add an option
to disable or configure the timer that will throw when the muxer doesn't
receive any data for a given period of time.
PiperOrigin-RevId: 482199360
(cherry picked from commit d213b93958)
`transformationMatrix` is not ambiguous, as there's no other local
transformationMatrix variable nearby.
PiperOrigin-RevId: 482184602
(cherry picked from commit c698ec51a2)
This was originally added in 4fd7d777b6, but it hasn't done anything
since 98ee159df1 (when the instanceof ExoPlayer check was removed).
PiperOrigin-RevId: 482161662
(cherry picked from commit 7d5f1a24be)
Currently, repeating the same item (via seekNext/Previous) implicitly
results in a seek to the default position of the current item, which
looks exactly the same as a direct seek. As a result, we don't send
onMediaItemTransition as we would for every other seekNext/Previous
call.
This can be fixed by explicitly marking the repeat case in the internal
BasePlayer/ExoPlayerImpl methods, so that the callback can be triggered.
Issue: google/ExoPlayer#10667
PiperOrigin-RevId: 481951788
(cherry picked from commit 76ce0cc69f)
- The naming DefaultMuxer is more consistent with the rest of
Transformer codebase (e.g. DefaultEncoderFactory).
- By hiding the implementation details of DefaultMuxer, the transition
to in-app Muxer will be seamless for apps using DefaultMuxer.
- The current plan is that DefaultMuxer will become the in-app muxer.
PiperOrigin-RevId: 481838790
(cherry picked from commit b4d7f066dd)
This means the null checker can be more sure that these fields don't
get reassigned between a null-check and a usage.
PiperOrigin-RevId: 481142004
(cherry picked from commit 248ee469ad)
We already have logic to end all session except the current one if the
current one doesn't have a MediaPeriodId yet. This is assuming that this
only happens after a seek on the app side where the player doesn't have
detailled knowledge about the MediaPeriodIds yet.
Currently this logic isn't triggered if the window we are coming from
doesn't have its MediaPeriodId either as we run into another check that
keeps sessions around until we have a valid windowSequenceNumber.
Swapping both conditions fixes this case without breaking any of the
other known transition scenarios.
Issue: androidx/media#180
PiperOrigin-RevId: 480866465
(cherry picked from commit 6070d9110a)
- This method is redundant with getSupportedSampleMimeTypes().
- This is to prepare the Muxer class to become public.
PiperOrigin-RevId: 480840902
(cherry picked from commit 8962f5a3f4)
When debugging and fixing Issue: google/ExoPlayer#10666 I wanted to write a regression
test, but needed to add a test first... This is just a small bit of
coverage to start with. It checks the field/channel filtering works
correctly, but doesn't check any styling info. It also doesn't test
'pop on' subtitles (i.e. when the subtitle isn't shown until a 'end of
subtitle' signal is received).
PiperOrigin-RevId: 480644568
(cherry picked from commit 6052212c15)
We currently use the literal -1 (=NO_VALUE) when adding up the
total. Tracks without known bitrate can be ignored in the
calculation, but we should use an explicit value of 0.
#minor-release
Issue: google/ExoPlayer#10664
PiperOrigin-RevId: 480048126
(cherry picked from commit af19e0ea89)
If the sample type is Dolby Vision and the display does not support Dolby Vision, then the capabilities DecoderSupport flag is set to DECODER_SUPPORT_FALLBACK_MIMETYPE. This denotes that the renderer will use a decoder for a fallback mimetype if possible. This alters track selection as tracks with DecoderSupport DECODER_SUPPORT_PRIMARY are preferred.
UnitTests included
-DefaultTrackSelector test that checks track selection reordering with DECODER_SUPPORT_FALLBACK_MIMETYPE
-MediaCodecVideoRenderer test that checks setting of DecoderSupport flag based on Display's Dolby Vision support
Issue: google/ExoPlayer#8944
PiperOrigin-RevId: 480040876
(cherry picked from commit a366590a04)
Currently, a frame is dropped if it's requested release time is in the past.
This mode was added to support previewing. However, in normal ExoPlayer
playback, slightly late frames (<30ms late) are also rendered. On MediaCodec
side, this means calling `releaseOutputBuffer` with a release time in the
past.
PiperOrigin-RevId: 479615291
(cherry picked from commit 2188685c46)
Also, update tests to allow AnyOf error codes, and no longer check exception messages, which caused quite a bit of churn.
PiperOrigin-RevId: 479570861
(cherry picked from commit faa796d736)
This mode is supported by using `C.TIME_UNSET` (which is a negative value). The
new logic decouples the value of `C.TIME_UNSET` and the frame dropping
behaviour.
PiperOrigin-RevId: 479368880
(cherry picked from commit ccab9fba03)
* Add `setOutputStreamOffsetUs(long)` method in `AudioSink`.
* Add private methods `setOutputStreamOffsetUs(long)` method in `MediaCodecRenderer` and `DecoderAudioRenderer`.
* Add protected method `onOutputStreamOffsetUs(long)` method in `MediaCodecRenderer`, in which:
* `MediaCodecRenderer` itself will be no-op for this method.
* `MediaCodecAudioRenderer` will propagate this value to its `audioSink`.
* Add logics in `DecoderAudioRenderer` to calculate `outputStreamOffsetUs`.
PiperOrigin-RevId: 479265429
(cherry picked from commit 4c73241058)
The JavaDoc of RequestMetadata should point to the media3 controller,
not the platform one.
PiperOrigin-RevId: 479047924
(cherry picked from commit 0889589947)
Currently `FrameProcessor.releaseOutputFrame()` method supports
Release at a specific system time
Drops the frame
This API is not that convenient to use when the caller wants to release a frame, now, regardless of the release time. A use case is to release (present) a frame when no frame is shown for a while, and it's thus better to just release the frame, now.
Currently if MCVR wants a frame to be rendered now, MCVR calls release frame with a set offset like 10us: `releaseOutputFrame(System.nanoTime() + 10_000)`. The 10us offset is to prevent the frame processor dropping the frame, due to thread hopping delays.
To make the API better usable, consider adding a mode for releasing the frame now, like (bold marks the new mode)
- Use C.TIME_UNSET to drop
- **Use -1 to release the frame immediately, or**
- Use an actual release time.
PiperOrigin-RevId: 479044215
(cherry picked from commit ff8dd0b4b9)
Assert that tone mapping is applied when an HDR edit cannot be HDR, but is successfully tone mapped. Meanwhile, assert that fallback, which is applied after codec configuration (which throws the "Tone-mapping requested but not supported by the decoder" error) is not applied when that error is called.
PiperOrigin-RevId: 478762951
(cherry picked from commit 36e41059ea)
"Final" was likely added to reference the FinalMatrixTextureProcessorWrapper,
which is a package-private class. However, I think more clear to express that
this is the input size, which then has all effects applied, to get the output
size.
PiperOrigin-RevId: 477975358
(cherry picked from commit 7286155fc3)
Rename test files to avoid substrings that can be implied by the directory name,
like "Transformation" and "Test"
No functional changes. Renaming-only.
PiperOrigin-RevId: 477724724
(cherry picked from commit 9786802527)
This allows to access the associated functionality of AudioTrack and
fills a feature gap to MediaPlayer, which has a similar method.
Issue: androidx/media#135
PiperOrigin-RevId: 476398964
(cherry picked from commit ccb820dd2f)
* Before this CL, the texture was stored during the construction of the LUT processor. This failed since if one creates a list of GlEffects on the application thread, the texture will get stored in the application thread during the effect creation and not on the GL thread, which executes the FrameProcessors.
* This is an issue since the executing thread then can't index from the texture stored on a different thread.
PiperOrigin-RevId: 476388021
(cherry picked from commit f745c6ee0e)
If the sample type is dolby vision and the following conditions match
a)There is a supported alternative codec mimetype
b)Display does not support Dolby Vision
Then getDecoderInfos will return the alternative types.
Issue: google/ExoPlayer#9794
PiperOrigin-RevId: 476356223
(cherry picked from commit 94a88e93d9)
* Transform the intermediate color space to linear SDR by applying the SMPTE 170M EOTF and OETF.
* Use linear colors for the color filter pixel tests and update all golden bitmaps.
PiperOrigin-RevId: 476124592
(cherry picked from commit afd829e5db)
The ClearKey CDM will attach an 'invalid' URL in `KeyRequest` objects,
when the documentation states this should be an empty string if a
default URL is not known.
#minor-release
PiperOrigin-RevId: 476113513
(cherry picked from commit 331d4d626f)
*** Original commit ***
Handle int instead of byte in SSIM.
The value of pixels are converted to integers at the point of use,
move this logic to the initialisation step.
This is a prerequisite step for testing SSIM calculation, which
will lead on to some SSIM improvements being verifiable.
Tested manually and SSIM values match for the same video
before and after this change.
***
PiperOrigin-RevId: 473259446
(cherry picked from commit 8f9c9d0f88)
The value of pixels are converted to integers at the point of use,
move this logic to the initialisation step.
This is a prerequisite step for testing SSIM calculation, which
will lead on to some SSIM improvements being verifiable.
Tested manually and SSIM values match for the same video
before and after this change.
PiperOrigin-RevId: 473231779
(cherry picked from commit eb6c1183b6)
Test that HDR editing succeeds on devices supporting HDR editing, tone maps on
devices supporting tone mapping, and throws exceptions on all other devices.
Also, only restrict HDR editing and tone mapping support to API 31+ only when
transcoding, not for all transformations.
PiperOrigin-RevId: 472958965
(cherry picked from commit 8ee2121627)
If the back buffer is using too much memory, there is a risk
playback could get stuck because LoadControl refuses to load
further data. This eventually results in a stuck-buffering
playback error.
We can detect this case, clear the back buffer and then ask
the LoadControl again to avoid failing playback in such a case.
PiperOrigin-RevId: 472679797
(cherry picked from commit 125646e4c9)
The stream offset is used to calculate the presentation time of
a metadata object when reading and later when playing, to calculate
the current presentation time to decide whether to send the metadata
to the output.
Accordingly, the presentation time of a pending metadata that has been
calculated with a given offset needs to be recalculated when the
stream offset changes.
#minor-release
PiperOrigin-RevId: 472499943
(cherry picked from commit 5a1223777c)
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (3 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 472254253
(cherry picked from commit 8396647896)
shouldPassthrough's internal checks seem to be check whether we should *not*
pass through, which seemed a bit like a confusing double-negative to me.
shouldTranscode is slightly more clear, by instead returning true when we do
want to transcode.
No functional changes intended.
PiperOrigin-RevId: 471753771
(cherry picked from commit 1a4cd549a4)
3b0d2c1586 made `shouldPassthrough` always return false for `enableHdrVideoEditing`:
>We force using `FrameEditor` (no passthrough) to avoid the need to select another edit operation, and use the new shaders. The `EGLContext` and `EGLSurface` also need to be set up differently for this path.
However, this was introduced before the `videoNeedsEncoding` setting was introduced in 3f615040c0. That setting should apply to HDR videos as much as SDR videos.
PiperOrigin-RevId: 471569853
(cherry picked from commit 94713a8ffb)
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (3 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 471198016
(cherry picked from commit bac7d697c3)
In particular, make it a bit more clear that "rendering" and "releasing" frames are
related concepts, and how they differ from one another in conjunction with frame
dropping.
PiperOrigin-RevId: 471037733
(cherry picked from commit e6a1936ba9)
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (19 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 471022923
(cherry picked from commit 674b3d4575)
Native multidex can only be used for binaries with minSdkVersion of 21 or higher, but minSdkVersion was specified to 16.
PiperOrigin-RevId: 470003836
(cherry picked from commit 142d1c062c)
Use the PQ OETF and EOTF to ensure that intermediate fragment shader operations
using PQ are in linear BT.2020 rather than PQ and HLG-1 BT.2020.
Also, swap the OETF and EOTF in shaders, as they were used incorrectly before
Manually tested by verifying transformer demo HLG and PQ videos look the same with and without this CL, including with a BitmapOverlayProcessor enabled to test flows both with one MatrixTransformationProcessor that skips HDR TFs, and with one that doesn't.
PiperOrigin-RevId: 469736067
(cherry picked from commit a2139109e3)
Upstream timestamps from the decoder are also in microseconds,
so using microseconds here is consistent with that.
PiperOrigin-RevId: 468659099
(cherry picked from commit 4e7f9c575d)
Adds a method to FrameProcessor.Listener to be called when an
output frame is available and a method releaseOutputFrame in
FrameProcessor allowing the caller to trigger release of the
oldest available output frame at a given timestamp. Late frames
or frames with unset release times are dropped in the
FinalMatrixTransformationProcessorWrapper.
More than one output frame can become available before they are
released if the penultimate GlTextureProcessor is capable of producing
multiple output frames. Processing continues while waiting for
releaseOutputFrame to be called. Frame release tasks are prioritized
over other tasks.
PiperOrigin-RevId: 468473072
(cherry picked from commit 2c063546a1)
We create an empty CueGroup in many places as default or
where none is needed. Instead, we can define a constant
for this purpose and reuse it.
PiperOrigin-RevId: 467944841
(cherry picked from commit 29208ec1ed)
Increase the estimated max sample size for HEVC by 2x, and set a minimum
size of 2MB. The 2MB will be applied for resolutions up to 1080p, after
which the new calculation takes effect. This is in par with the
platform's HEVC software decoder.
PiperOrigin-RevId: 467641494
(cherry picked from commit d3d5ffce91)
This base class will simplify the implementation of custom
Player classes. The current version only supports
available commands and playWhenReady handling.
PiperOrigin-RevId: 467618021
(cherry picked from commit 9a7fde8fde)
createSupportedTransformationRequest is more accurate than
createFallbackTransformationRequest, as a TransformationRequest will be returned
regardless of whether any fallback is applied.
PiperOrigin-RevId: 466641277
(cherry picked from commit 70972bbab0)
Previously, this feature interpreted SDR signals as HDR when called. Now, only HDR
streams are interpreted as HDR, so the javadoc should be updated. Not yet removing
this method, as there are still some loose ends to finish up (ex. PQ support, e2e
tests).
PiperOrigin-RevId: 466425738
(cherry picked from commit 2d2926b8c0)
While HDR is most closely tied to the color transfer (ex.
COLOR_TRANSFER_SDR is the only one explicitly mentioning dynamic
range), technically color spaces may be associated with HDR as well,
like BT.2020 commonly being used for HDR rather than BT.709 for SDR.
Therefore, it's more specific to mention just that the transfer is HDR.
PiperOrigin-RevId: 466316960
(cherry picked from commit 7075f78eb2)
This allows the GlEffectsFrameProcessor to later handle HLG and PQ
differently, or limited and full color range differently.
No functional change intended in this CL.
PiperOrigin-RevId: 466070764
(cherry picked from commit e444eaa5b7)
In the case where this check fails, the downstream frame processor chain won't be able to handle the incoming (SDR) data anyway as we've already set it up for HDR.
PiperOrigin-RevId: 465584814
(cherry picked from commit 0e99d28a79)
`requestCalculateSsim` more clearly represents the intention of the caller.
Also rephrase the javadoc to simplify it and make it more precise.
PiperOrigin-RevId: 465575578
(cherry picked from commit d90d7d3078)
Adds a new event to AudioOffloadListener to get the offload state of the track, which indicates when software decoding is taking place.
PiperOrigin-RevId: 465264362
(cherry picked from commit fe2b846552)
Avoids disabling Offload on a write error, and instead relies on this being disabled on the AudioTrack init. It will no longer recover by disabling offload.
PiperOrigin-RevId: 465248917
(cherry picked from commit 2fbe1bbfb3)
