`SilentAudioGenerator` could output a fractional audio frame, and this could cause downstream components to throw because of trying to read a complete audio frame but only seeing a partial one.
Calculate the output buffer size based on the frame size (which is a no-op for stereo 16-bit audio) and calculate a total number of frames to output then multiple by the frame size.
PiperOrigin-RevId: 494992941
isLoading is not allowed to be true when IDLE, so we have to set to
false when stopping in case it was set to true before.
PiperOrigin-RevId: 494975405
BasePlayer simplifies implementations by handling all the various
seek methods and forwarding to a single method that can then be
implemented by subclasses. However, this loses the information about
the concrete entry point used for seeking, which is relevant when
the subclass wants to verify or filter by Player.Command. This
can be improved by adding the command as a new parameter. Since
we have to change the method anyway, we can also incorporate the
boolean flag about whether the current item is repeated to avoid
the separate method.
PiperOrigin-RevId: 494948094
- Use a single `VideoSize` instance instead of four primitive fields.
- Clarify that the reported size is the decoded size, that is the encoded video
size.
PiperOrigin-RevId: 494148190
The duration in TransformerInternal.ComponentListener is set on the
Transformer internal thread, and is read on the playback thread. Making
this field volatile ensures that the playback thread reads the updated
value.
PiperOrigin-RevId: 493908385
Some Player methods like getting the Looper and adding listeners
were always allowed to be called from any thread, but this is
undocumented. This change makes the threading rules of these
methods more explicit.
Removing listeners was never meant to be called from another thread
and we also don't support it safely because final callbacks may
be triggered from the wrong thread. To find potential issues, we
can assert the correct thread when releasing listeners.
Finally, there is a potential race condition when calling addListener
from a different thread at the same time as release, which may lead to
a registered listener that could receive callbacks after the player is
released.
PiperOrigin-RevId: 493843981
An AndroidTest is needed to test the message sending from ExoPlayerImpl to
a video renderer (MCVR in this case). The test will be added later.
PiperOrigin-RevId: 493602259
The folder type has a mix of information about the item. It shows
whether the item is browsable (type != FOLDER_TYPE_NONE) and
which Bluetooth folder type to set for legacy session information.
It's a lot clearer to split this into a boolean isBrowsable and
use the existing mediaType to map back to the bluetooth folder type
where required.
folderType is not marked as deprecated yet as this would be an API
change, which will be done later.
PiperOrigin-RevId: 493544589
This adds support for the release handling. To align with the
established behavior in ExoPlayer, the player can only call
listeners from within the release methods (and not afterwards)
and automatically enforces an IDLE state (without listener call)
in case getters of the player are used after release.
PiperOrigin-RevId: 493543958
Rename ERROR_CODE_OUTPUT_FORMAT_UNSUPPORTED to
ERROR_CODE_ENCODING_FORMAT_UNSUPPORTED.
This makes the error code more consistent with ERROR_CODE_DECODING_FAILED on the
decoding side. Also, the error code is in the "Encoding errors (4xxx)" section,
so muxer errors probably should be in the "Muxer errors (7xxx)" section instead.
Additionally, no muxer errors currently seem to use
ERROR_CODE_OUTPUT_FORMAT_UNSUPPORTED, so this should be a safe change.
PiperOrigin-RevId: 493322880
This is necessary to move video slow motion flattening to the
AssetLoader because this step can change the duration. As we use the
duration before flattening to calculate the progress, we must also use
the position before flattening.
PiperOrigin-RevId: 493291990
These terms are easier to understand, and make sense in the context of
MatrixTextureProcessor now that a MatrixTextureProcessor may have a
different input and output transfer.
PiperOrigin-RevId: 493265980
Modify FrameProcessor and MatrixTextureProcessor interfaces to support
different input and output color transfers. Does not implement conversion between
color ranges (ex. HDR and SDR), but should allow for conversion between color
transfers of the same color range (ex. HLG and PQ).
This supports in-app tone mapping, where we need a single FrameProcessor to
input HDR color transfers (ex. HLG/PQ) and output SDR (ex. gamma2.2). This also
supports previewing, where we need a single FrameProcessor to be able to input HLG
and output PQ.
Manually tested by confirming colors still look right on SDR and HDR videos
with a rotation and color affect applied.
PiperOrigin-RevId: 493108678
From this CL on, FrameProcessor listeners will be invoked from an Executor that
is passed in when creating the FrameProcessor.
GlTextureProcessor needs to invoke the ErrorListener on the said Executor too.
PiperOrigin-RevId: 493018583
These have the same value (`-1`), and basically the same meaning (offset
in an array/list/file/byte stream/etc), but 'position' is an overloaded
term in a media playback library, and there's a risk people assume that
methods like `Player.getCurrentPosition()` may return
`C.POSITION_UNSET`, when in fact unset media times (whether duration or
position) are always represented by `C.TIME_UNSET` which is a) a `long`
(not `int`) and b) a different underlying value. (aside:
`getCurrentPosition()` never returns an unset value, but it's a good
example of the ambiguity of the word 'position' between 'byte offset'
and 'media timestamp'.)
PiperOrigin-RevId: 492493102
This inconsistency was exposed by an upcoming change to deprecate
`POSITION_UNSET` in favour of `INDEX_UNSET` because position is an
ambiguous term between 'byte offset' and 'media position', as shown
here.
PiperOrigin-RevId: 492470241
Discovered while investigating Issue: google/ExoPlayer#10823
Example stack trace with the previous code (I added the index value for
debugging):
```
playerFailed [eventTime=44.07, mediaPos=44.01, window=0, period=0, errorCode=ERROR_CODE_FAILED_RUNTIME_CHECK
androidx.media3.exoplayer.ExoPlaybackException: Unexpected runtime error
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:635)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loopOnce(Looper.java:202)
at android.os.Looper.loop(Looper.java:291)
at android.os.HandlerThread.run(HandlerThread.java:67)
Caused by: java.lang.IllegalArgumentException: index=-1
at androidx.media3.common.util.Assertions.checkArgument(Assertions.java:55)
at androidx.media3.extractor.text.webvtt.WebvttSubtitle.getEventTime(WebvttSubtitle.java:62)
at androidx.media3.extractor.text.SubtitleOutputBuffer.getEventTime(SubtitleOutputBuffer.java:56)
at androidx.media3.exoplayer.text.TextRenderer.getCurrentEventTimeUs(TextRenderer.java:435)
at androidx.media3.exoplayer.text.TextRenderer.render(TextRenderer.java:268)
at androidx.media3.exoplayer.ExoPlayerImplInternal.doSomeWork(ExoPlayerImplInternal.java:1008)
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:509)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loopOnce(Looper.java:202)
at android.os.Looper.loop(Looper.java:291)
at android.os.HandlerThread.run(HandlerThread.java:67)
]
```
#minor-release
PiperOrigin-RevId: 492464180
This is necessary to move video decoding to the AssetLoader. Otherwise,
if the decoder max pending frame count is reached, the AssetLoader will
stop queuing frames to the pipeline, and process data will not be called
anymore.
PiperOrigin-RevId: 492392621
In some cases we split a test method, and in other cases we just add
line breaks to make the separation between arrange/act/assert more
clear.
PiperOrigin-RevId: 492182769
This adds the forwarding logic for most setters in SimpleExoPlayer
in the same style as the existing logic for setPlayWhenReady.
This change doesn't implement the setters for modifying media items,
seeking and releasing yet as they require additional handling that
goes beyond the repeated implementation pattern in this change.
PiperOrigin-RevId: 492124399
EncoderUtil using a static list to cache encoders means it's not possible to
use a different set of encoders for different tests when running all
robolectric tests together.
PiperOrigin-RevId: 491959350
This better matches the terminology we use elsewhere in the Player
interface, where items inside the playlist are referred to as
"media item" and only the entire list is called "playlist".
PiperOrigin-RevId: 491882849
Bypass Z Fold 4 HDR10 tone-mapping bug by limiting the max frame count to 12.
This passed with a value of 14, and failed with a value of 15, but I figured I'd use 12 just to be safe.
PiperOrigin-RevId: 491684058
Use the bitrate of the audio format (when available) in
DefaultAudioSink.AudioTrackBufferSizeProvider.getBufferSizeInBytes() to
calculate accurate buffer sizes for direct (passthrough) playbacks.
#minor-release
PiperOrigin-RevId: 491628530
To support OPUS offload, we need to provide a few configuration values
that are currently not set due to the lack of devices supporting
OPUS offload.
PiperOrigin-RevId: 491613716
Main change:
- Removed `Codec.EncoderFactory.createForVideoEncoding`'s argument of a list
of allowed MIME types
- Moved the check for whether a video MIME type is supported to VTSP
PiperOrigin-RevId: 491611799
The list of charsets is already hard-coded, and using `Charset` types
ensures they will all be present at run-time, hence we will never
encounter an 'unsupported' charset.
PiperOrigin-RevId: 491324466
This thread just starts the player and handles the player callbacks for
now. Sample pipelines are still run on the playback thread.
PiperOrigin-RevId: 491299671
This is more clear than using Format.NO_VALUE, when we do actually intend for an
output value.
Also, fix @see formatting by using summary fragments instead, and add an error
output for OETF and EOTF transfer functions.
PiperOrigin-RevId: 490910229
Our FakeClock generally makes sure that playback tests are fully
deterministic. However, this fails if the test uses blocking waits
with clock.onThreadBlocked and where relevant Handlers are created
without using the clock.
To fix the flakiness, we can make the following adjustments:
- Use TestExoPlayerBuilder instead of legacy ExoPlayerTestRunner
to avoid onThreadBlocked calls. This also makes the tests more
readable.
- Use clock to create Handler for FakeVideoRenderer and
FakeAudioRenderer. Ideally, this should be passed through
RenderersFactory, but it's too disruptive given this is a
public API.
- Use clock for MediaSourceList and MediaPeriodQueue update
handler.
PiperOrigin-RevId: 490907495
Format expects the values of `averageBitrate` and `peakBitrate` in bps and the value fetched from AC3SpecificBox and EC3SpecificBox is in kbps.
PiperOrigin-RevId: 490756581
*** Original commit ***
Rollback of 01eddb34f5
*** Original commit ***
Parse and set `peakBitrate` for Dolby TrueHD(AC-3) and (E-)AC-3
#minor-release
***
***
PiperOrigin-RevId: 490707234
This reduces the priority to best effort (from the default that seems to be best effort), and allows us to run SSIM even on 8k24fps video. Without this CL,
start()'ing a second codec may result in a MediaCodec.CodecException.
Tested to confirm that transformation8k24():
* fails deterministically without this CL, or with KEY_PRIORITY set to 0.
* succeeds deterministically after this CL (~18s on Samsung Z Fold 4)
PiperOrigin-RevId: 490570416
We cannot check this in code, due to DEVICE_INITIAL_SDK_INT being a @SystemApi, and
reflection being a bit risky/unstable.
PiperOrigin-RevId: 490537916
The bug has since been fixed.
The values still could change, as the API is labelled as @UnstableApi, so it's
probably fine to leave the <p> tag mostly as is.
PiperOrigin-RevId: 490509205
This change includes a change in the `IMediaController.aidl` file and needs
to provide backwards compatibility for when a client connects that is of an older or
newer version of the current service implementation.
This CL proposes to create a new AIDL method `onPlayerInfoChangedWithExtensions`
that is easier to extend in the future because it does use an `Bundle` rather than
primitives. A `Bundle` can be changed in a backward/forwards compatible way
in case we need further changes.
The compatibility handling is provided in `MediaSessionStub` and `MediaControllerStub`. The approach is not based on specific AIDL/Binder features but implemented fully in application code.
Issue: androidx/media#102
#minor-release
PiperOrigin-RevId: 490483068
If there is output data available (outputBuffer.hasRemaining()), then
there is no need to move other data between the underlying processors.
It will not change the buffer being returned by that call to getOutput.
If there is no output data readily available, it's necessary to go to
the AudioProcessors and pass buffers between them, as this may produce
data for output.
PiperOrigin-RevId: 490482653
This allows us to release both codecs used in SSIM when one fails to
configure() or start().
Tested and confirmed that on Samsung Galaxy Z Flip 4, running all
TransformationTest.java tests, tests after transform8k24() fails to start the
2nd codec:
* Before this CL, all fail.
* After this CL, all pass.
PiperOrigin-RevId: 490461560
This exception is a bit shorter and more clear (and is more clear that this is a
test issue, as opposed to the prior issue that was thrown as an ExoPlayer
DataSourceException, which may seem like a legitimate Transformer failure)
PiperOrigin-RevId: 490252772
Following naming conventions throughout AndroidTestUtil, REMOTE files should have REMOTE instead of ASSET. Update the URI and FORMAT names accordingly.
PiperOrigin-RevId: 490237673
Instead of the ID3v2 text frame falling back to a singleton list of an
empty string when the given values are empty, make that case throw
an exception within the text frame, and move that fallback behavior
into the ID3v2 decoder.
ExoPlayer is unable to detect the presence of subtitle tracks in some
MPEG-TS files that don't fully declare them. It's possible for a
developer to provide the list instead, but doing so is quite awkward
without this helper method. This is consistent for how
`DefaultExtractorsFactory` allows other aspects of the delegate
`Extractor` implementations to be customised.
* Issue: google/ExoPlayer#10175
* Issue: google/ExoPlayer#10505
#minor-release
PiperOrigin-RevId: 490214619
