- Split text emphasis mark and style into two IntDefs
- Represent textEmphasis="none" with a span rather than null
- Fixed bugs in the style parsing logic
- Refactor TextEmphasis class to support different ordering of styles
- Merge RubySpan.Position and TextEmphasisSpan.Position
- Remove TTML constructs from Spanned classes
Includes fixes for the HTTP implementations, which previously
broke this contract specifically in the case when a server
responds to a range request with a HTTP 200 response. To fix
this case, skipping to the requested position is moved from
read() to open(). As a side effect, this nicely simplifies
CronetDataSource!
PiperOrigin-RevId: 359737301
Given we're proposing to make reading from the end a non-error case,
it's important to check that we return the right thing from open(),
and that we read the right thing (i.e., nothing) once opened.
For now, this test allows quite a bit of permissiveness, in line
with other related tests. This will be tightened up in due course.
PiperOrigin-RevId: 359504075
Currently, this only asserts that *if* an exception is thrown, it
must be a position-out-of-range exception as determined by
DataSourceException.isCausedByPositionOutOfRange.
Issue: #7326
PiperOrigin-RevId: 359092124
Assert that an exception is not thrown from DataSource.open
if the DataSpec's start position is valid but its end position
extends beyond the end of the data.
HTTP based DataSource implementations have no good way of
knowing when this is the case, so it makes sense to make this
the required behaviour, rather than requiring an exception to
be thrown or allowing both.
There are also use cases where the caller may want to use the
end position as an upper bound, without knowing for sure how
long the content is. An example of this use case is wanting to
pre-cache the first N bytes of a stream. This implies that any
exception should be thrown after reading to the end of the
data, rather than preemptively in open.
Issue: #7326
PiperOrigin-RevId: 359063721
- If DataSource.close fails then it's unknown whether the underlying file was
written to the cache. We should assume that it has not been.
- Always re-query cachedBytes at the start of CacheWriter.cache, since its
current value may be incorrect if a previous failure was the result of a
file not being written to the cache.
PiperOrigin-RevId: 359039109
- Make it a property of the DataSource, not of the resource.
- Apply it only when a contract test reads using an
unbounded DataSpec.
PiperOrigin-RevId: 358997735
This type is different to the selection reason, which is
dynamic (i.e., corresponds to the individual selected track,
which can change during playback). The static type is
exposed via TrackSelection, where-as the selection reason
will be internal to the core (i.e., player) module.
PiperOrigin-RevId: 357578201
This parameterized test execute a single playback with a variety of
specified network conditions, user country and network types, and then
compares some basic ABR performance data against a dump file to detect
changes.
PiperOrigin-RevId: 356468304
We currently block the loading thread until the calculated load
time has past and then unblock again by a message sent from the
playback thread. However, because the loading thread itself is not
using a Looper and runs freely, we don't control when the short
calculations on the loader thread that determine how long we have
to wait are happening, and we also don't control how long it takes
to start and stop this thread.
To solve these problems and to make the playback deterministic we
can
1. Send a message on the playback thread to block until the loader
thread has started.
2. Block the playback thread whenever a loading thread is doing its
short calculation of wait times. The playback thread knows when it
can continue because loading either enter a new waiting state for
a simulated load time or loading is finished completely.
3. Also wait on the playback thread until the loader has shut down.
As this is waiting for a message on the playback thread, we can
achieve this by sending messages to ourselves at the current time
until the loader is shut down.
All 3 steps together ensure that the loading thread interaction is
compeltely deterministic when simulating bandwidth profiles with the
BandwidthProfileDataSource. As we need to notify the source before and
after the load started/finished, we also need a small wrapper for the
chunk source when running the playback.
PiperOrigin-RevId: 355810408
Main improvement is to switch away from ExoPlayerTestRunner and to
split out the waiting component so that the same class can be used
from Robolectric tests in the future.
The only functional difference is that that BufferLengthLogAction
is removed completely because the data isn't used downstream and the
method of collecting this data is a bit arbitrary.
PiperOrigin-RevId: 355117850
This can happen for instrumented tests that are run on a non-Looper
thread. If these tests send a message to a Looper thread to start the
test procedure, they should just triger the message directly as before.
PiperOrigin-RevId: 354066836
- The order of sample stream (and thus the order in which loads are
triggered) currently depends on a Set and thus on the hash codes
of the objects that change with every run. Changing to a List solves
this problem.
- The FakeAdaptiveDataSet directly created a static Random (with random
seed) to compute the variation of chunk sizes. Changing this to an
injected Random object that can always be initialized with the same
seed also removed this randomness from the tests.
PiperOrigin-RevId: 353878661
This is achieved by only triggering one message at a time. After
triggering a message we send another to ourselves to know when the
following message can be triggered.
Other required changes:
- The messages need to be sorted correctly (by time and creation order)
- To prevent deadlocks when one thread is waiting for another,
we need to add new method to Clock to indicate that the current
thread is about to wait. This then allows us to trigger messages
from other threads in FakeClock.
- AnalyticsCollectorTest needed some adjustments:
- onTimelineChanged now deterministically arrives after the initial
timline is already known, so some of the period information changes
from window only to full period info.
- The playlistOperations test suffers from a bug that the first frame
is rendered too early and that's why we now get additional events.
PiperOrigin-RevId: 353877832
We currently only remove messages that have already been sent
to the actual Handler, not the pending ones that are only kept
in the FakeClock. Fix this by also removing matching messages
from the FakeClock list.
PiperOrigin-RevId: 353877049
Currently only delayed messages are handled. Change this to handling
all messages so that we have more control over their execution order.
This requires adding a new wrapper type for the Message to support
the obtainMessage + sendToTarget use case.
PiperOrigin-RevId: 353876557
`TrackSelection` had mutation methods which were to be called only
internally by ExoPlayer components but were exposed in the
public `Player` interface.
The mutation methods have been moved out of `TrackSelection`
to a new class `ExoTrackSelection`.
Current track related read-only method have also been moved out,
because they are actually something quite unclear.
Even for a single item playlist, it's the track being buffered rather
than the track being played, which is unclear.
But when you have a playlist it starts to get really confusing,
because if the next item is being buffered, then it's actually
the last track to be buffered in the currently playing item.
As a final aside, the implementations don't do proper thread synchronization
to ensure visibility of updated state by the calling thread.
Exposing those mutable methods in the public `Player` interface
was problematic because they leaking internal concepts of `ExoPlayer`.
This is also required to minimize the `Player` interface for long term
stability.
`ExoTrackSelection` is a subclass of `TrackSelection`.
This is not ideal as an `TrackSelection` implementation could
break the current immutability.
This was done in order for this refactor to be simpler.
A future patch will fully split the two classes.
All `MediaPeriod` and `Sources` had to be updated to use the new
`TrackSelection` dynamic aspect class name.
An alternative would have been to break ExoPlayer's public API, keeping
`TrackSelection` as the dynamic aspect name, and calling the public static
aspect class `TrackSelectionState` or similar.
Nevertheless, while it would have impacted less files, it would have
many more small apps and casual users of ExoPlayer.
#player-to-common
PiperOrigin-RevId: 353637924
This ensures the message devilery is governed by the clock.
Also replace setting a Handler with a Looper to facilititate this
change.
PiperOrigin-RevId: 353019729
Add a test to DataSourceContractTest that asserts the gzip flag is
either ignored or handled correctly.
Add a test resource to DefaultHttpDataSourceContracTest that enables
gzip compression on the 'server' and checks it's handled correctly by
the client.
PiperOrigin-RevId: 352574359
- SimpleExoPlayer now always generates a session ID at
construction time. This ID is used indefinitely, including
for tunneling, unless a call to setAudioSessionId is made
to change it.
- DefaultTrackSelector support for enabling tunneling has
been changed to a boolean, since tunneling now uses the
same session ID as non-tunneled mode.
- Since the session ID is now always set at the top level,
internal propagation of generated session IDs is no longer
necessary, and so is removed.
PiperOrigin-RevId: 351349687
Whether a resource resolves to a known length or not is more than just
a property of the resource & data source - for example if
`DataSpec.flags` contains `ALLOW_GZIP` then the length might be
unresolved. More generally, a `DataSource` could randomly return
`C.UNKNOWN_LENGTH` from `open()` 50% of the time and still fulfil the
`DataSource` interface. This makes it ~impossible to write a meaningful
assertion aroun this.
So this change relaxes the assertion slightly to more closely match the
definition of the `DataSource` interface.
We leave the `resolveToUnknownLength` toggle in
`WebServerDispatcher.Resource` because this is still useful for
simulating the case of a server that is serving a file it doesn't
know the length of.
PiperOrigin-RevId: 351124246
The length needs to change depending on the positition/length parameters
passed to DataSpec, so it doesn't really make sense to keep this private
method - it's clearer to in-line the calls in each test.
PiperOrigin-RevId: 348749254
This replaces all the duplicated logic previously implemented in
FakeSampleStream and more closely follows the pattern of how
SampleStreams are used from real MediaPeriods.
Some tests needed adjustments because using real the SampleQueue
improved behaviour:
- Waiting for isLoading is only needed once even across period
boundaries because the real SampleQueue doesn't have the on/off
pattern.
- AnalyticsCollectorTest.playlistOperations() was wrongly asserting
that some pre-buffering events. The new version is more intuitively
correct we pre-buffer the second item during the initial loading
phase (thus period1seq1) and keep the buffer in the queue after
the removal operation.
PiperOrigin-RevId: 348440255
I decided not to migrate all the tests in one CL to keep the diff
manageable. I'll make follow-up CLs to migrate the tests, and eventually
delete TeeCodec and all associated logic.
I couldn't completely remove the dump diff because
ShadowMediaCodec.getCodecInfo() (which would give me access to the MIME
type) doesn't seem to work properly - it returned video/avc when
name=exotest.audio.aac, and looking into the code it looks like there's
some native methods that are missing shadow implementations.
PiperOrigin-RevId: 347991956
The adaptive period currently extends the base (non-adaptive) period
to share common MediaPeriod boilerplate code.
However, once we start using the real SampleQueue in FakeMediaPeriod
the common code becomes even less and the overhead to support
multiple stream implementation from the base class is no longer
worth it. Thus, this change removes the class hierarchy and copies
the common parts to FakeAdaptiveMediaPeriod.
PiperOrigin-RevId: 347990468
Before this we added the resource info to Truth assertions, but the
same info is missing if an exception bubbles out of the SUT.
PiperOrigin-RevId: 346757960
Changes MetadataRetriever and Transformer so that their
respective tests don't need to manually control the SystemClock
in order to execute taks posted with delay from Loader.
PiperOrigin-RevId: 345024140
The workaround to post a message was needed to ensure we
receive any final onIsPlayingChanged event before the test
is finished (to record the correct playing time).
Using onEvents allows us to do this synchronously as the
callback guarantees that there is no other pending event.
#exofixit
PiperOrigin-RevId: 344436180
In many cases it doesn't matter for the test itself how many windows
a timeline has, or even how the timeline of a MediaSource looks like.
And since we introduced the MediaItem-based APIs, single-window
Timelines are the only fully supported Timelines. Thus there is no
point in specifiying this explicitly.
Using these assumptions, we can remove some boilerplate when setting
up standard FakeTimelines or FakeMediaSources with a standard
FakeTimeline.
#exofixit
PiperOrigin-RevId: 344210395
This only has a couple of simple tests for now. We'll add more tests
after we've written some concrete sub-class tests for various
DataSource implementations.
I've included a concrete FileDataSourceContractTest as a demonstration.
PiperOrigin-RevId: 342851187
This information is already available in the MappingTrackSelector,
but not currently forwarded to the TrackSelection.Factory.
This makes it more complicated (or impossible) to depend on period
or manifest information in the track selection (for example to only
select tracks which are cached for the current format).
PiperOrigin-RevId: 340605886
ExoHostedTest was calculating the total play time by solely listening
to onIsPlayingChanged. The last update to false (when playback ends) was relying
on a callback that was always called after the player has already been released.
This happened because of a now fixed bug where callbacks were still issued if
player.release() is called from within another callback (as in ExoHostedTest).
Fix the currently broken test by posting the release call so that all pending
events are still delivered first.
PiperOrigin-RevId: 339438863
This moves TestUtil#runMainLooperUntil and
TestUtil#createRobolectricConditionVariable to a new RobolectricUtil
class.
Also move testutil classes that use Robolectric-related utils classes
(e.g. TestPlayerRunHelper, TestDownloadManagerListener).
PiperOrigin-RevId: 336864959
TestExoPlayerBuilder can be used from both emulator and robolectric
tests, TestPlayerRunHelper uses Robolectric Looper behaviour, meaning
it can be moved to the robolectricutils module in a follow-up change.
PiperOrigin-RevId: 336634225
Otherwise, some extractor tests are seeking without making sure that the
extractor has retrieved the formats.
This is needed for PR Issue: #7378.
PiperOrigin-RevId: 335934326
Throwing Error forces a test to catch Throwable (e.g.
DashWidevineOfflineTest#widevineOfflineReleasedV22), which will also
catch AssertionError meaning the fail() call at the end of the try block
won't work.
The DashWidevineOfflineTest have been broken since
91185500a1
PiperOrigin-RevId: 331120894
To play slow motion streams where the audio has been recorded at
slower speeds, it is necessary to be able to resample (rather than
time-stretch) the audio. This change undeprecates back the previously
deprecated PlaybackParameters class to allow apps to set pitch.
PiperOrigin-RevId: 328703116
Currently the audio renderer can become ready before the AudioTrack
actually has enough data to play something, which means that the
player may transition to the ready state before audio starts
playing. This makes the player's current state transition not very
useful for detecting when audio actually starts playing.
This change adds a new event to notify apps when the audio position
is increasing after a pause or seek/flush/reset event, and includes
an estimate of the system time at which audio playout started.
Issue: #7577
PiperOrigin-RevId: 327810040
This allows us to more easily create different dumps derived from the
same assets.
This moves media/source files from `assets/` to `assets/media/` and
dump files from `assets/` to `assets/extractordumps/` and
`assets/audiosinkdumps/` as appropriate. I intend to add
`assets/playbackdumps/` in a future CL.
PiperOrigin-RevId: 326986283
*** Original commit ***
Rollback of bf5e6c7862
*** Original commit ***
Pass startPositionUs into Renderer.replaceStream
Plumb this down into BaseRenderer.onStreamChanged and use it when
deciding whether to render the first frame of a new period.
***
***
PiperOrigin-RevId: 325218588
