This is prework for `Sonic` to provide a precise calculation of output
sample counts, and thus allow `SpeedChangingAudioProcessor` to replace
`getSpeedAdjustedTimeAsync()` with an accurate synchronous calculation.
This is a non functional change.
PiperOrigin-RevId: 690608520
This method is already called below in the
`else if (sps.isCompleted())` block which applies when
`hasOutputFormat == true`, but this is only ever entered if we are
parsing SPS and PPS NAL units **after** we've emitted a format, which
is only the case if
`DefaultTsPayloadReaderFactory.FLAG_DETECT_ACCESS_UNITS` is set (which
it isn't by default).
The equivalent call in `H265Reader` is already inside the
`if (!hasOutputFormat)` block, so doesn't need a similar fix.
#cherrypick
PiperOrigin-RevId: 689809529
This ensures that media button preferences with slots for BACK,
FORWARD and OVERFLOW are converted to the legacy custom layout
according to the implicit placement rules. This has to happen
when populating the MediaSessionCompat and when generating the
notification for older APIs. Sending these preferences to older
Media3 controllers can filter them down to the custom layout the
session would have used previously, but there is no need to adjust
the reservation extras because the older Media3 custom layout has
no concept of these extras.
PiperOrigin-RevId: 689761637
This is equivalent to the current logic, but also allows to easily pick
up other buttons that use the BACK, CENTRAL or FORWARD slots for the
compact view by default.
Also fix the test to actually assert the output order.
PiperOrigin-RevId: 689747844
This ensures that the slots are set according to the implicit placement
rules for the legacy custom layouts. This has to be done when receiving
custom actions from a MediaControllerCompat and for Media3 sessions
setting the custom layout field.
PiperOrigin-RevId: 689737951
These methods are marked `default` on the `AnalyticsListener` interface
with an empty implementation, so there's no need to override them just
to re-define the empty implementation.
PiperOrigin-RevId: 689416584
* Use asset without audio for independent video time progress
* Use longer item duration to avoid ExoPlayer STATE_READY workaround
(see https://github.com/google/ExoPlayer/issues/1874)
PiperOrigin-RevId: 689409427
Add `DecoderAudioRenderer.getDurationToProgressUs()` so that `ExoPlayer`, if set with `experimentalSetDynamicSchedulingEnabled()`, will dynamically schedule its main work loop to when the `DecoderAudioRenderer` can make progress.
PiperOrigin-RevId: 689377247
Mp4Muxer caches the samples and then writes them in batches.
The new API allows disabling the batching and writing sample
immediately.
PiperOrigin-RevId: 689352771
- Create `LibiamfAudioRenderer` with `DefaultRenderersFactory` in `ExoPlayerModuleProguard`.
- Remove redundant library availability check from `IamfModuleProguard`.
- Move `proguard-rules.txt` to the root folder.
- Removed unused `cryptoType` parameter from `setLibraries()` method in `IamfLibrary`.
- Added log when `LibiamfAudioRenderer` is loaded in `DefaultRenderersFactory`.
- Annotated missing classes with `@UnstableApi`.
- Check for library availability and throw exception in `IamfDecoder` constructor.
#cherrypick
PiperOrigin-RevId: 689330016
This change:
1. Updates `DataSourceContractTest` to allow multiple "not found"
resources, and to include additional info (e.g. headers) on them.
2. Updates the contract test to assert that `DataSource.getUri()`
returns the expected (non-null) value for "not found" resources
between the failed `open()` call and a subsequent `close()` call.
The `DataSource` is 'open' at this point (since it needs to be
'closed' later), so `getUri()` must return non-null.
* This change also fixes some implementations to comply with this
contract. It also renames some imprecisely named `opened`
booleans that **don't** track whether the `DataSource` is open
or not.
3. Updates the contract test assertions to enforce that
`DataSource.getResponseHeaders()` returns any headers associated
with the 'not found' resource.
4. Configures `HttpDataSourceTestEnv` to provide both 404 and "server
not found" resources, with the former having expected headers
associated with it.
PiperOrigin-RevId: 689316121
The new `media3-ui-compose` module does not have any Material library dependencies, but will rely on androidx.compose + foundation/runtime/ui and other non-theming/opinionated libraries. Surface handling is one such usecase.
PiperOrigin-RevId: 689004504
Also add a test for this to avoid missing any others in future. Also
flesh out the existing test for the deprecated builder, to assert the
return type is correctly updated.
PiperOrigin-RevId: 688948768
The duration is now correctly calculated as the maximum of all track durations, instead of being overwritten by the last track's value. This aligns with how other Extractor implementations handle durations for multiple tracks.
PiperOrigin-RevId: 688896743
`RandomParameterizedSpeedChangingAudioProcessorTest` follows the
structure of `RandomParameterizedSonicAudioProcessorTest` and will help
improve coverage and confidence in the output length of
`SpeedChangingAudioProcessor`.
This CL is prework for removing the synchronization between the video
pipeline and the audio pipeline for speed changing effects.
PiperOrigin-RevId: 688578597
Currently most of the public APIs use `fullscreen` (apart from the deprecated `PlayerControlView.OnFullScreenModeChangedListener` which will have to remain as is). This code changes mostly private variable naming.
PiperOrigin-RevId: 688559509
Frame rate change is currently notified to the release control when the
video frame processor input frame rate changes, but it should be when
the video frame processor output frame rate changes.
PiperOrigin-RevId: 688512300
If not copied, the extras Bundle can be accidentally changed by the
app if it modifies the instance passed into MediaSession. On the flip
side, the Bundle should be modifiable once created so that the session
can amend the extras if needed without crashing.
PiperOrigin-RevId: 688485963
Added start and end time details to the error message for `REASON_START_EXCEEDS_END`, helping to debug cases where the start time exceeds the end time.
PiperOrigin-RevId: 688117440
The method allows extractors to set track duration when available. The `default` implementation does nothing, allowing implementers of `TrackOutput` to override it if they need to handle track duration.
Implemented it in `FakeExtractor` to print track duration in dump files.
PiperOrigin-RevId: 688110288
Treats the media duration as unknown (`C.TIME_UNSET`) when all bytes are `-1` to prevent exceptions during playback.
Issue: androidx/media#1819
#cherrypick
PiperOrigin-RevId: 688103949
This adds the API surface for media button preferences in MediaSession
and MediaController. It closely mimics the existing custom layout
infrastructure (which it will replace eventually).
Compat logic:
- Session:
- When converting to platform custom actions, prefer to use
media button preferences if both are set.
- When connecting to an older Media3 controller, send the
media button preferences as custom layout instead.
- Controller:
- Maintain a single resolved media button preferences field.
- For Media3 controller receiving both values, prefer media
button preferences over custom layouts.
Missing functionality:
- The conversion from/to custom layout and platform custom actions
does not take the slot preferences into account yet.
PiperOrigin-RevId: 686950100
Before this change:
* With legacy subtitle decoding (at render time), load errors (e.g. HTTP
404) would result playback completely failing, while parse errors
(e.g. invalid WebVTT data) would be silently ignored, so playback
would continue without subtitles.
* With new subtitle decoding (at extraction time), both load and parse
errors would result in playback completely failing.
This change means that now neither load nor parse errors in text or
metadata tracks stop playback from continuing. Instead the error'd track
is disabled until the end of the current period.
With new subtitle decoding, both load and parse errors happen during
loading/extraction, and so are emitted to the app via
`MediaSourceEventListener.onLoadError` and
`AnalyticsListener.onLoadError`. With legacy subtitle decoding, only
load errors are emitted via these listeners and parsing errors continue
to be silently ignored.
Issue: androidx/media#1722
PiperOrigin-RevId: 686902979
These events are always reported with the primary child period ID,
because this is the same ID used in the parent `MergingMediaSource`'s
Timeline.
This ensures that e.g. loading errors from sideloaded subtitles (which
uses `MergingMediaSource`) are now reported via
`AnalyticsListener.onLoadError`.
It results in non-error events being reported from these children too,
which will result in more `onLoadStarted` and `onLoadCompleted` events
being reported (one for each child).
Issue: androidx/media#1722
PiperOrigin-RevId: 686901439
Use this for sideloaded subtitles, so preparation can still complete
despite an error from e.g. `DataSource.open`. In this case, no subtitle
tracks will be emitted.
Issue: androidx/media#1722
PiperOrigin-RevId: 686888588
This is prework for implementing
`RandomParameterizedSpeedChangingAudioProcessorTest`, which depends on
Sonic's resampling algorithm's behaviour.
This is a non-functional refactor.
PiperOrigin-RevId: 686874593
When a `SampleQueue` is prepared prior to playback, the start position may be less than the timestamp of the first sample in the queue and still be valid. This scenario can come about with specific clipping values and if all samples are sync samples. Currently, with `ClippingMediaPeriods` around `ProgressiveMediaPeriods`, if the `SampleQueue` has already been reset through the seekTo operation in `onPrepared`, then in the aforementioned scenario the seekTo operation in `handleDiscontinuity` will remove all samples and reset the loading periods unnecessarily.
The solution is that if the `ProgressiveMediaPeriod` has already handled a seekTo operation for the same position and the sample queue has not been read yet, then loading does not need to be reset.
The tests in `MergingPlaylistPlaybackTest` were specifically causing this behavior through its setup of `MergingMediaSources` around clipped `FilteringMediaSources`. Since the video content was not 'all sync samples', there would always be a discontinuity to handle and the audio content being 'all sync samples' would start with samples post start time.
These changes also remove the flakiness from the `MergingPlaylistPlaybackTest`.
PiperOrigin-RevId: 686858444
Currently every test in the library passes `null` here, which seems to
end up being passed into non-null places in the library. This change
removes the parameter and instead initializes the field to a
`DefaultAllocator` instance in the same way that `DefaultLoadControl`
creates one.
PiperOrigin-RevId: 686823273
This ensures that the buffers are correctly marked as `rendered = true`
(and therefore `renderered = false` is meaningful when it's present).
This was accidentally missed in 387153fcf2
PiperOrigin-RevId: 686474869
This allows users to extend and customize specific methods of the `TrackOutput` implementation while inheriting default behaviors for others.
PiperOrigin-RevId: 686454360
Childrens returned by the legacy service when a Media3
browser connects are cached and returned with the first
`getChildren` call in case the same `paranetid` is
requested.
In any other case the cache is immediately cleared.
#cherrypick
PiperOrigin-RevId: 686157511
Updated logic to walk forward in the timestamps array to include all frames within the valid edit duration, accounting for out-of-order frames. This ensures that no frames with timestamps less than `editMediaTime` + `editDuration` are incorrectly excluded.
Issue: androidx/media#1797
PiperOrigin-RevId: 686075680
When receiving an error from a legacy `MediaBrowserService` after
having successfully subscribed to a given `parentId`, the callback
needs to be asked to load the children again to receive an error
from the service.
Before this change such an error was dropped as a no-op by Media3
without the `MediaBrowser` giving a chance to react on such an error
being sent by the legacy service.
#cherrypick
PiperOrigin-RevId: 686052969
The `CapturingRenderersFactory` is only needed if the output is
asserted on, e.g. by using `PlaybackOutput` and
`DumpFileAsserts.assertOutput()`.
PiperOrigin-RevId: 686046545
Many of the Android TV platforms do not report accurate `SystemClock.elapsedRealtime()`
In addition this drift is not consistant accross multiple boxes, so the time offset
between any pair of boxes will vary over time.
This variance will lead to a drift in the Live Offset calculation.
Fix is simple, inValidate the NTP server query after a period of time (10 minutes)
and re-issue the call
`HlsExtractorFactory` instances are mutable, so storing one in a static
field is not safe, and can lead to state accidentally/surprisingly being
shared between different player instances.
PiperOrigin-RevId: 685701062
This ensures these values are still updated even if the delegate
`DataSource.open()` throws an exception (e.g. an HTTP 404).
PiperOrigin-RevId: 685687810
The `DefaultLoadControl` implementation of onTracksSelected only utilizes the `Renderer[]` parameter for use in stream type, of which it can collect from the `ExoTrackSelection[]` parameter.
PiperOrigin-RevId: 685677726
The `DefaultPreloadManager.Builder` is able to build the `DefaultPreloadManager` and `ExoPlayer` instances with the consistently shared configurations. Apps can:
* Simply setup the `DefaultPreloadManager` and `ExoPlayer` with all default configurations via `build()` and `buildExoPlayer()`;
* Or customize the shared configurations by the setters on `DefaultPreloadManager.Builder` and setup via `build()` and `buildExoPlayer()`;
* Or customize the player-only configurations for `ExoPlayer` via `buildExoPlayer(ExoPlayer.Builder)`.
PiperOrigin-RevId: 684852808
This CL is prework for implementing
`RandomParameterizedSpeedChangingAudioProcessorTest`, which will build
on logic present in `RandomParameterizedSonicTest`.
This is a non-functional change.
PiperOrigin-RevId: 684838017
Inconsistent rounding modes between `currentTimeUs` and
`bytesUntilNextSpeedChange` would cause `SpeedChangingAudioProcessor`
to miss calling `queueEndOfStream()` on `SonicAudioProcessor` on a speed
change, and thus the final output samples of that `SonicAudioProcessor`
"configuration" would be missed.
This change is also a partial revert of 971486f5f9, which fixed a hang
of `SpeedChangingAudioProcessor`, but introduced the dropped output
frames issue fixed in this CL (see b/372203420). To avoid reintroducing
the hang, we are now ignoring any mid-sample speed changes and will only
apply speed changes that are effective at a whole sample position.
PiperOrigin-RevId: 684824218
Removed `Android.mk` and `Application.mk`, allowing `CMake` to run directly from the build.gradle file. Users no longer need to check out `NDK` or depend on it, simplifying the usage of the Flac extension.
Also fixed a copy-pasted comment in `CMakeLists.txt` of Opus and IAMF.
PiperOrigin-RevId: 684769561
Removed `Android.mk` and `Application.mk`, allowing `CMake` to run directly from the build.gradle file. Users no longer need to check out `NDK` or depend on it, simplifying the usage of the Opus extension.
PiperOrigin-RevId: 684489927
We need to rebuild any native components of the app to prevent crashes on devices with 16 KB page support.
Tested on a device that supports 16 KB pages and runs Android 15, as well as on older Android devices.
Issue: androidx/media#1685
PiperOrigin-RevId: 684488244
Removed `Android.mk` and `Application.mk`, allowing `CMake` to run directly from the `build.gradle` file. Users no longer need to check out `NDK` or depend on it, simplifying the usage of the IAMF extension.
PiperOrigin-RevId: 684471874
The version and flags are stored in a single integer,
with the version in the higher 8 bits and the flags in
the lower 24 bits. The version should be 1 and the
flags should be 0.
Surprisingly the incorrect value was ignored by many
players and hence the bug was never caught.
With the bug, the video does not play on
`Samsung Galaxy S22 Ultra` and works well
after fixing the bug.
PiperOrigin-RevId: 684433371
Minor improvement to allow an Media3 browser to pass extras
when connecting the initial browser in `MediaControllerImplLegacy`.
Before this change an empty bundle was sent. After this change
the connection hints of the `Media3 browser is used as root hints
of the initial browser that connects when the Media3 browser is
built in `MediaBrowser.buildAsync`.
#cherrypick
PiperOrigin-RevId: 684372552
This helps avoid overflows in intermediate calculations.
Verified the value in the test using `BigInteger`:
```
jshell> BigInteger.valueOf(1L << 52).multiply(BigInteger.valueOf(90000)).divide(BigInteger.valueOf(1000000))
$3 ==> 405323966463344
```
Issue: androidx/media#1763
#cherrypick
PiperOrigin-RevId: 684028178
The implementation of these methods was updated from direct java integer
arithmetic in 885ddb167e.
In this change, `RoundingMode.FLOOR` was used to try and maintain
compatibility with java integer division. This was incorrect, because
java integer division uses `DOWN` (i.e. towards zero), rather than
`FLOOR` (i.e. towards negative infinity) semantics.
This change fixes the compatibility.
The dump file changes in this CL relate to tests that exercise edit
list behaviour. This involves manipulating negative timestamps, which
explains why they are impacted by this change.
PiperOrigin-RevId: 684013175
- Updated `DefaultTrackSelector.SpatializerWrapperV32.canBeSpatialized` to handle IAMF format.
- Modified `isAudioFormatWithinAudioChannelCountConstraints` to check for `NO_VALUE` of `channelCount` to improve readability.
Note: `DefaultTrackSelector.SpatializerWrapperV32.canBeSpatialized` is not triggered for the IAMF format due to the unset channel count (`Format.NO_VALUE`). The update ensures completeness.
#cherrypick
PiperOrigin-RevId: 684003980
Object-based audio is more efficient and flexible than channel-based audio, supporting a broader range of devices. This update makes `DefaultTrackSelector` prefer object-based audio when other factors are equal, ensuring its use whenever possible.
#cherrypick
PiperOrigin-RevId: 683990051
