Once the value returned from AudioTimestampPoller advances, we
only need getPlaybackHeadPosition to sample sync params and
verify the returned timestamp. Both of these happen less often
and we can avoid calling getPlaybackHeadPosition if we don't
actually need it.
PiperOrigin-RevId: 512882170
(cherry picked from commit 408b4449ff)
Playback parameter signalling can be quite complex because
(a) the renderer clock often has a delay before it realizes
that it doesn't support a previously set speed and
(b) the speed set on media clock sometimes intentionally
differs from the one surfaced to the user, e.g. during
live speed adjustment or when overriding ad playback
speed to 1.0f.
This change fixes two problems related to this signalling:
1. When resetting the media clock speed at a period transition,
we don't currently tell the renderers that this happened.
2. When a delayed speed change update from the media clock is
pending and the renderer for this media clock is disabled
before the change can be handled, the pending update becomes
stale but it still applied later and overrides any other valid
speed set in the meantime.
Both edge cases are also covered by extended or new player tests.
Issue: google/ExoPlayer#10882
PiperOrigin-RevId: 512658918
(cherry picked from commit e79b47ccff)
MediaCodecRenderer currently has two independent paths to trigger
events at stream changes:
1. Detection of the last output buffer of the old stream to trigger
onProcessedStreamChange and setting the new output stream offset.
2. Detection of the first input buffer of the new stream to trigger
onOutputFormatChanged.
Both events are identical for most media. However, there are two
problematic cases:
A. (1) happens after (2). This may happen if the declared media
duration is shorter than the actual last sample timestamp.
B. (2) is too late and there are output samples between (1) and (2).
This can happen if the new media outputs samples with a timestamp
less than the first input timestamp.
This can be made more robust by:
- Keeping a separate formatQueue for each stream to avoid case A.
- Force outputting the first format after a stream change to
avoid case B.
Issue: google/ExoPlayer#8594
PiperOrigin-RevId: 512586838
(cherry picked from commit 3970343846)
Some devices were reported to have wrong PerformancePoint sets
that cause 60 fps to be marked as unsupported even though they
are supported.
Issue: google/ExoPlayer#10898
PiperOrigin-RevId: 512580395
(cherry picked from commit d0cbf0fce8)
The output info for a new stream is marked pending until the last
sample of the previous stream has been processed. However, this fails
if the previous stream has already been fully processed. We need to
detect this case explicitly to avoid signalling the output change one
sample too late.
#minor-release
PiperOrigin-RevId: 512572854
(cherry picked from commit 7ffcc6f7ea)
This test became flaky after ab7e84fb34 because some of the
unrealistic frame times ended up on the same release time.
Using realistic numbers avoids the flakiness.
PiperOrigin-RevId: 512566469
(cherry picked from commit 0c8ce183fe)
Protected system broadcasts should not specify the export flag.
Marking them as NOT_EXPORTED breaks sticky broadcasts in some
cases.
Issue: google/ExoPlayer#10970
PiperOrigin-RevId: 512020154
(cherry picked from commit 93e117928c)
The current logic uses manual array operations to keep track of pending
changes. Modernize this code by using an ArrayDeque and a data class.
This also allows to extend the output stream information in the future.
This also fixes a bug where a position reset accidentally assigns a pending
stream offset instead of keeping the current one.
PiperOrigin-RevId: 511787571
(cherry picked from commit f042012495)
When rendering frames at a rate higher than the screen refresh rate,
e.g. playing at 8x, the player is releasing multiple frames at the same
release time (nanos) which are then dropped by the platform. The output
buffers are available later and as a result MediaCodec cannot keep up
decoding fast enough.
This change skips releasing multiple video frames on the same vsync
period and proactivelly drops the frame. The frame is counted as skipped
rather than dropped to differentiate with frames dropped due to slow
decoding.
PiperOrigin-RevId: 510964976
(cherry picked from commit ab7e84fb34)
This call may cause performance overhead in some situations,
for example if the AudioTrack needs to query an offload DSP
for the current position. We don't need to check this multiple
times per doSomeWork iteration as the value is unlikely to
change in any meaningful way.
PiperOrigin-RevId: 510957116
(cherry picked from commit 9eccf09165)
The current javadoc refers to the SessionCallback#onConnected, which doesn't exist.
PiperOrigin-RevId: 510261965
(cherry picked from commit fc642eb45f)
In parsing Describe RTSP response messages, IllegalArgumentExceptions are thrown for invalid parameters and values. These exceptions were not caught and crashed the Playback thread. Now these exceptions will be caught and their errors forwarded to the proper error handling listeners.
Issue: google/ExoPlayer#10971
PiperOrigin-RevId: 509207881
(cherry picked from commit a8c87453db)
The AsynchronousMediaCodecAdapter's queuing thread stores any exceptions
raised by MediaCodec and re-throws them on the next call to
queueInputBuffer()/queueSecureInputBuffer(). However, if MediaCodec
raises and error while queueing, it goes into a failed state and does
not announce available input buffers. If there is no input available
input buffer, the MediaCodecRenderer will never call
queueInputBuffer()/queueSecureInputBuffer(), hence playback is stalled.
This change surfaces the queueing error through the adapter's dequeueing
methods.
PiperOrigin-RevId: 508637346
(cherry picked from commit 706431059c)
`TrackSelectorResult.rendererConfigurations` can contain null elements:
> A null entry indicates the corresponding renderer should be disabled.
This wasn't caught by the nullness checker because `ExoPlayerImpl` is
currently excluded from analysis.
#minor-release
Issue: google/ExoPlayer#10977
PiperOrigin-RevId: 508619169
(cherry picked from commit a6dfcf7799)
The AudioTrackPositionTracker needs to correct positions by
the speed set on the AudioTrack itself whenever it makes
estimations based on real-time (=the real-time playout
duration is not equal to the media duration played).
This happens for the main playback path already, but not for
the mode in which the position is estimated from the playback
head position and also not in the phase after the track has
been stopped. Both cases are not very noticeable during
normal playback, but become relevant when playing in offload
mode.
PiperOrigin-RevId: 507736408
(cherry picked from commit 01d7bc7279)
In MediaCodecUtil, use Format.colorInfo, besides the codec string,
to accurately map to a 10bit HEVC profile.
PiperOrigin-RevId: 507500071
(cherry picked from commit a50ea94525)
This change includes 3 things:
- when the legacy media session is created, FLAG_HANDLES_QUEUE_COMMANDS
is advertised if the player has the COMMAND_CHANGE_MEDIA_ITEMS
available.
- when the player changes its available commands, a new
PlaybackStateCompat is sent to the remote media controller to
advertise the updated PlyabackStateCompat actions.
- when the player changes its available commands, the legacy media
session flags are sent accoridingly: FLAG_HANDLES_QUEUE_COMMANDS is
set only if the COMMAND_CHANGE_MEDIA_ITEMS is available.
#minor-release
PiperOrigin-RevId: 506605905
(cherry picked from commit ebe7ece1eb)
Can be used to combine multiple media items into a single timeline window.
Issue: androidx/media#247
Issue: google/ExoPlayer#4868
PiperOrigin-RevId: 506283307
(cherry picked from commit fcd3af6431)
This change fixes an issue that can be reproduced when
a controller `onConnect` creates a `QueueTimeline` out
of the state of a legacy session and then `prepare` is called.
`activeQueueItemId`, `metadata` and the `queue` of the legacy
session are used when a `QueueTimeline` is created. The change
adds unit tests to cover the different combinatoric cases these
properties being set or unset.
PiperOrigin-RevId: 505731288
(cherry picked from commit 4a9cf7d069)
When seeking in fMP4, we try to extract as little samples as possible
by only starting at the preceding sync frame. This comparison should
use <= to allow sync frames at exactly the seek position.
Issue: google/ExoPlayer#10941
PiperOrigin-RevId: 505098172
(cherry picked from commit 00436a04a4)
MergingMediaPeriod creates its track groups with ids concatenating position in its periods array and the underlying child track group id. The ids can be used in selectTracks for matching to periods list.
Issue: google/ExoPlayer#10930
PiperOrigin-RevId: 505074653
(cherry picked from commit 542a1ef03f)
For most missing commands, we already disable the corresponding
controls. This change extends this to more UI elements that are
disabled in case the corresponding action is unavailable.
#minor-release
PiperOrigin-RevId: 505057751
(cherry picked from commit b3e7696ba7)
The commands are partly checked already before enabling
features or calling player methods, but the checks were
still missing in many places.
#minor-release
PiperOrigin-RevId: 504589888
(cherry picked from commit e2ece2f5bc)
This allows a MediaController to understand which methods calls
are available on a legacy session.
PiperOrigin-RevId: 504306806
(cherry picked from commit 067340cb0a)
ImaUtil calls VideoProgressUpdate.equals() which is annotated as hidden,
which causes lint errors with gradle.
#minor-release
PiperOrigin-RevId: 504306210
(cherry picked from commit 5f6e172c8f)
Created unified MediaUtils method to handle various logic for calling Player.setMediaItems from MediaSessionStub and MediaSessionLegacyStub
PiperOrigin-RevId: 504271877
(cherry picked from commit 7fbdbeb6ca)
Added onSetMediaItems callback listener to allow the session to modify/set MediaItem list, starting index and position before call to Player.setMediaItem(s).
Added conditional check in MediaSessionStub.setMediaItem methods to only call player.setMediaItem rather than setMediaItems if player does not support COMMAND_CHANGE_MEDIA_ITEMS
PiperOrigin-RevId: 503427927
(cherry picked from commit bb11e0286e)
This makes it implicitly clear that if the value of a getter changes due
to a change in command availability then the listener will be invoked,
without needing to explicitly document every command on every listener
method.
#minor-release
PiperOrigin-RevId: 503178383
(cherry picked from commit 280889bc4a)
We stop estimating new position when pausing until we
receive a new position from the player. However, this
means that we will continue to return a possible stale
previous position. Updating the current position before
pausing solves this issue.
PiperOrigin-RevId: 503153982
(cherry picked from commit e961c1b5e9)
We currently only document it for the getCurrentMediaItem(), but
the command was always meant to cover all information about the
current media item and the position therein.
To correctly hide information for controllers, we need to filter
the Timeline when bundling the PlayerInfo class if only this
command is available.
PiperOrigin-RevId: 503098124
(cherry picked from commit f15b752543)
When bundling PlayerInfo, we need to remove information if the
controller is not allowed to access it. This was only partially
done at the moment.
PiperOrigin-RevId: 502852798
(cherry picked from commit 69cfba7c53)
When bundling PlayerInfo, we remove data when the controller is not
allowed to access this data via getters. We also remove data for
performance reasons. In the toBundle() method, it's currently hard to
make the connection between allowed commands and filtering, because
the values are checked at a different place. This can be made more
readable by forwarding the applicable Commands directly.
The only functional fix is to filter the Timeline when sending the
first PlayerInfo after a connecting a controller if the command to
get the Timeline is not available. This also allows us to remove a
path to filter MediaItems from Timelines as it isn't used.
PiperOrigin-RevId: 502607391
(cherry picked from commit c90ca7ba5f)
PlayerWrapper advertises PlaybackStateCompat actions to the legacy
MediaSession based on the player's available commands.
PiperOrigin-RevId: 502559162
(cherry picked from commit 39f4a17ad4)
This player didn't fully check all player commands before calling the
respective methods.
PiperOrigin-RevId: 502353704
(cherry picked from commit a2a44cdc02)
The method to dispatch actions in MediaControllerImplBase takes
a Player.Command, but the value is only used to check if we
are setting a surface and need to handle the special blocking
call. This can be cleaned up by removing the parameter and calling
a dedicated blocking method where needed. This also ensures we
have to mention the relevant Player.Command only once in each
method.
PiperOrigin-RevId: 502341862
(cherry picked from commit 664ab72d09)
This avoids throwing exceptions for correct (but deprecated) Player
method invocations.
PiperOrigin-RevId: 502341428
(cherry picked from commit 86a95c2a4a)
This fix applies to Android 12 and above.
In this fix, the `MediaSessionService` will try to start in the foreground before the session playback resumes, if ForegroundServiceStartNotAllowedException is thrown, then the app can handle the exception with their customized implementation of MediaSessionService.Listener.onForegroundServiceStartNotAllowedException. If no exception thrown, the a media notification corresponding to paused state will be sent as the consequence of successfully starting in the foreground. And when the player actually resumes, another media notification corresponding to playing state will be sent.
PiperOrigin-RevId: 501803930
(cherry picked from commit 0d0cd78626)
This method allows to call through to `StreamManager.focus()` of the currently playing SSAI stream.
PiperOrigin-RevId: 501399144
(cherry picked from commit 16285ca5df)
Starting with Android 13 (API 33) an app needs to request the
permission to post notifications or notifications are suppressed.
This change documents this in the class level JavaDoc of the
`DownloadService`.
Issue: google/ExoPlayer#10884
PiperOrigin-RevId: 501346908
(cherry picked from commit 20aa5bd926)
For TV devices the skip button needs to have the focus to be accessible with
the remote control. This property makes this configurable while being set to
true by default.
PiperOrigin-RevId: 501077608
(cherry picked from commit 9882a20783)
Initialising the fields as Integer and then getting a String on compute
time is slow. Instead we directly initialise these fields as String.
Improves the time taken in bundling PlayerInfo further to less than
200ms from ~300ms.
Also modified a test to improve productive coverage.
PiperOrigin-RevId: 500003935
(cherry picked from commit 578f2de48f)
As per the javadoc for AtomParsers.parseTrack, ParserException should be "thrown if the trak atom can't be parsed."
PiperOrigin-RevId: 499522748
(cherry picked from commit d8ea770e9b)
Improves the time taken to construct playerInfo from its bundle from ~400 ms to ~300 ms.
Also made `Timeline.Window.toBundle(boolean excludeMediaItem)` public as it was required to assert a condition in tests.
PiperOrigin-RevId: 499512353
(cherry picked from commit 790e27d929)
Added another check in each of these tests to make sure we don't add keys to bundle for fields with default values.
Also fixed comments of similar changes in `AdPlaybackStateTest` and `MediaMetadataTest`.
PiperOrigin-RevId: 499463581
(cherry picked from commit 0512164fdd)
Did not do this optimisation for `AdPlaybackState.AdGroup` as its length is zero for `AdPlaybackState` with no ads.
No need to pass default values while fetching keys, which we always set in `AdPlaybackState.AdGroup.toBundle()`.
PiperOrigin-RevId: 496995048
(cherry picked from commit 7fc2cdbe1b)
Added another check in test to make sure we don't add keys to bundle for fields with `null` values.
PiperOrigin-RevId: 496948705
(cherry picked from commit 13c93a3dd6)
There are two overloads of this method due to a type 'rename' from
`PlayerControlView.VisibilityListener` to
`PlayerView.ControllerVisibilityListener`. Currently when you call one
overload it passes `null` to the other one (to clear the other listener).
Unfortunately this results in it clearing itself, because it receives
a null call back!
This change tweaks the documentation to clarify that the 'other'
listener is only cleared if you pass a non-null listener in. This solves
the recursive problem, and allows the 'legacy' visibility listener to be
successfully registered.
Issue: androidx/media#229
#minor-release
PiperOrigin-RevId: 496876397
(cherry picked from commit 4087a011e2)
Users of this class may run into these assertions when creating the
State and they need to check the source code to understand why
the State is invalid. Adding error messages to all our correctness
assertions helps to understand the root cause more easily.
PiperOrigin-RevId: 496875109
(cherry picked from commit 6c98f238e4)
Also clean up the strict mode violations of using `BitmapFactory.convertToByteArray` on the main thread.
PiperOrigin-RevId: 496422355
(cherry picked from commit d848d3358a)
These are the remaining setter operations. They all share the same
logic that handles playlist and/or position changes. The logic to
create the placeholder state is mostly copied from ExoPlayerImpl's
maskTimelineAndPosition and getPeriodPositonUsAfterTimelineChanged.
PiperOrigin-RevId: 496364712
(cherry picked from commit 5fa115641d)
The period updates were introduced to ensure the buffered position is
updated regularly and that any playback position drift is corrected.
None of these updates need to happen while the player is paused or
not loading and we can avoid the constant binder interactions.
PiperOrigin-RevId: 496329800
(cherry picked from commit 0749b05923)
The tunneling callbacks are sent via Handler messages and may be
handled after the codec/surface was changed or released.
We already guard against the codec/surface change condition by
creating a new listener and verifying that the current callback
happens for the correct listener instance, but we don't guard
against a released codec yet.
PiperOrigin-RevId: 495882353
(cherry picked from commit 49ccfd6383)
Some Player methods operate relative to existing indices in the
playlist (add,remove,move,seek). As these operations may be issued
from a place with a stale playlist (e.g. a controller that sends
a command while the playlist is changing), we have to handle out-
of-bounds indices gracefully. In most cases this is already
documented and implemented correctly. However, some cases are not
documented and the existing player implementations don't handle
these cases consistently (or in some cases not even correctly).
PiperOrigin-RevId: 495856295
(cherry picked from commit a1954f7e0a)
The `MediaItem` instances in the following cases are not actually empty but acts as a placeholder. `EMPTY_MEDIA_ITEM` can also be confused with `MediaItem.EMPTY`.
PiperOrigin-RevId: 495843012
(cherry picked from commit 3e7f53fda7)
Improves the time taken to construct `playerInfo` from its bundle from ~450 ms to ~400 ms. Each `MediaItem` inside `Timeline.Window` contains `MediaMetadata` and hence is a good candidate for bundling optimisations. There already exists a test to check all parameters for null values when unset.
PiperOrigin-RevId: 495614719
(cherry picked from commit d11e0a35c1)
This simplifies some position tracking needs for an app implementing
SimpleBasePlayer.
- The period index can always be derived from the media item index
and the position. So there is no need to set it separately.
- The media item index can be left unset in the State in case the app
doesn't care about the value or wants to set it the default start
index (e.g. while the playlist is still empty where UNSET is
different from zero).
- Similarly, we should allow to set the content position (and buffered
position) to C.TIME_UNSET to let the app ignore it or indicate the
default position explictly.
PiperOrigin-RevId: 495352633
(cherry picked from commit 545fa59462)
This ensures they are not accidentally triggered again when
the state is rebuilt with a buildUpon method.
PiperOrigin-RevId: 495280711
(cherry picked from commit a123134892)
This improves the time taken to construct PlayerInfo from bundle from ~600ms to ~450ms.
PiperOrigin-RevId: 495055355
(cherry picked from commit 395cf4debc)
isLoading is not allowed to be true when IDLE, so we have to set to
false when stopping in case it was set to true before.
PiperOrigin-RevId: 494975405
(cherry picked from commit 6e7de583bb)
BasePlayer simplifies implementations by handling all the various
seek methods and forwarding to a single method that can then be
implemented by subclasses. However, this loses the information about
the concrete entry point used for seeking, which is relevant when
the subclass wants to verify or filter by Player.Command. This
can be improved by adding the command as a new parameter. Since
we have to change the method anyway, we can also incorporate the
boolean flag about whether the current item is repeated to avoid
the separate method.
PiperOrigin-RevId: 494948094
(cherry picked from commit ab6fc6a08d)
Some Player methods like getting the Looper and adding listeners
were always allowed to be called from any thread, but this is
undocumented. This change makes the threading rules of these
methods more explicit.
Removing listeners was never meant to be called from another thread
and we also don't support it safely because final callbacks may
be triggered from the wrong thread. To find potential issues, we
can assert the correct thread when releasing listeners.
Finally, there is a potential race condition when calling addListener
from a different thread at the same time as release, which may lead to
a registered listener that could receive callbacks after the player is
released.
PiperOrigin-RevId: 493843981
(cherry picked from commit 927b2d6a43)
The folder type has a mix of information about the item. It shows
whether the item is browsable (type != FOLDER_TYPE_NONE) and
which Bluetooth folder type to set for legacy session information.
It's a lot clearer to split this into a boolean isBrowsable and
use the existing mediaType to map back to the bluetooth folder type
where required.
folderType is not marked as deprecated yet as this would be an API
change, which will be done later.
PiperOrigin-RevId: 493544589
(cherry picked from commit ae8000aeca)
This adds support for the release handling. To align with the
established behavior in ExoPlayer, the player can only call
listeners from within the release methods (and not afterwards)
and automatically enforces an IDLE state (without listener call)
in case getters of the player are used after release.
PiperOrigin-RevId: 493543958
(cherry picked from commit 4895bc42ff)
The callback is currently triggered on the ExoPlayer playback thread
instead of the app thread that added the listener.
PiperOrigin-RevId: 492474405
(cherry picked from commit 634c6161f1)
