This CL also aligns supported color space in `media3 common` and `media3 muxer`.
Earlier `muxer` would take even those values which are considered invalid
in `media3` in general.
Earlier muxer would throw if a given `color standard` is not recognized
but with the new change, it will rather put default `unspecified` value.
#cherrypick
PiperOrigin-RevId: 698683312
Enable transformer to transmux into alternative sample MIME types.
For example, some Dolby Vision profiles have a backwards-compatible
AVC or HEVC layer. MV-HEVC is backwards compatible with HEVC.
This change enables Transformer to transmux into the backwards compatible
format to improve compatibility with legacy APIs such as
MediaMetadataRetriever.
PiperOrigin-RevId: 693667597
The implementation of these methods was updated from direct java integer
arithmetic in 885ddb167e.
In this change, `RoundingMode.FLOOR` was used to try and maintain
compatibility with java integer division. This was incorrect, because
java integer division uses `DOWN` (i.e. towards zero), rather than
`FLOOR` (i.e. towards negative infinity) semantics.
This change fixes the compatibility.
The dump file changes in this CL relate to tests that exercise edit
list behaviour. This involves manipulating negative timestamps, which
explains why they are impacted by this change.
PiperOrigin-RevId: 684013175
This CL also fixes EOS handling to account for not-yet-copied samples in
`remainingInputToCopyFrameCount`, which would throw off the final output
sample count calculation.
For testing, we allow a tolerance of 0.000017% drift between expected
and actual number of output samples. The value was obtained from running
100 iterations of `timeStretching_returnsExpectedNumberOfSamples()` and
calculating the average delta percentage between expected and actual
number of output samples. Roughly, this means a tolerance of 40 samples
on a 90 min mono stream @48KHz.
PiperOrigin-RevId: 683133461
To avoid rounding errors, set the `Rounding mode` of the `uvFromVu` and `vuFromUs` results to `HALF_UP`. This `Rounding mode` rounds numbers towards the "nearest neighbor" unless both neighbors are equidistant, in which case round up.
PiperOrigin-RevId: 679003943
This CL adds `SonicTest` and `RandomParameterizedSonicTest` as
initial basic unit testing for `Sonic.java`. The tested scenarios
do not necessarily verify a correct implementation of Sonic, but rather
hope to catch any behaviour change from the current implementation.
The change includes a small fix for a lossy simplification and also
checks whether the output sample count matches the expected drift from
the truncation accumulation error present in Sonic's resampler. This is
important as pre-work for fixing issues with unexpected durations within
`SonicAudioProcessor` and `SpeedChangingAudioProcessor` that cause AV
sync issues for speed changing effects.
This is a partial roll forward of e88d6fe459, which was rolled back in
873d485056.
PiperOrigin-RevId: 677756854
Last buffer was not flipped, so was writing the garbage data between
limit and capacity, rather than the actual data between position and
limit.
As a result, all PCM audio dump files need updating.
PiperOrigin-RevId: 676452990
- Added logic to parse media duration from the `mdhd` box for accurate frame rate calculation.
- Fallbacks to track duration from `tkhd` when `mdhd` contains invalid or missing data.
- Avoids incorrect frame rate calculations in MP4 files with an edit list (`elst`) box.
- Adds frame rate calculations for partially fragmented MP4 files.
- Verified accuracy with tools like `mediainfo` and `ffprobe`.
Issue: androidx/media#1531
**Note**: The slight difference in frame rate values in dump files that aren’t MP4s with an edit list or fragmented MP4s isn’t due to differences in `tkhd` and `mdhd` duration values (which should be identical for non-edited or non-fragmented files). Rather, it’s because they are calculated using different timescales. The `mvhd` box defines a global movie timescale, which is used for the track's `tkhd` duration. Meanwhile, each track’s `mdhd` box defines its own timescale specific to its content type, which we now use for more accurate frame rate calculation.
PiperOrigin-RevId: 676046744
to
LAST_SAMPLE_DURATION_BEHAVIOR_SET_FROM_END_OF_STREAM_BUFFER_OR_DUPLICATE_PREVIOUS
This CL also combines LAST_SAMPLE_DURATION_BEHAVIOR_SET_FROM_END_OF_STREAM_BUFFER
and LAST_SAMPLE_DURATION_BEHAVIOR_DUPLICATE_PREVIOUS.
The reason for combining the two enums is that, when the option
to use END_OF_STREAM_BUFFER is selected and if the EOS buffer is
not provided then the muxer anyways fallbacks to duplicate
duration behavior.
The last sample with 0 durations seems less useful so
change the default behavior to non-zero duration.
This will also match the behavior with MediaMuxer.
PiperOrigin-RevId: 675189932
Sonic would accumulate truncation errors on float to int conversions
that caused the final output sample count to drift noticeably, by
hundreds of samples on streams of a few minutes of length. The fix now
keeps track of the truncation error and compensates for it.
Other small fixes include eliminating lossy operations (e.g. int
division) and using doubles instead of floats for resampling where
helpful.
This CL also introduces `SonicParameterizedTest`, which helps test
resampling on an arbitrary number of randomly generated parameters,
with random sample data. `SonicParameterizedTest` uses `BigDecimal`s
for calculating sample count values, as to avoid precision issues with
large sample counts.
PiperOrigin-RevId: 673852768
When processing edit lists in MP4 files, the media start position may be a non-keyframe. To ensure proper playback, the decoder must preroll to the preceding keyframe, as these preroll samples are essential for decoding but are not rendered.
Issue: google/ExoPlayer#1659
#cherrypick
PiperOrigin-RevId: 673457615
In the current implementation due to missing "="
operator, last three bytes were not checked for
000 or 001 sequence.
In sample_no_bframes file, few samples has extra 0 at the end.
It was working fine with the bug because muxer was writing some
harmless 0 at the end.
PiperOrigin-RevId: 672994054
Add parameterized test for codecs supported by InAppMuxer.
Split TransformerWithInAppMuxerEndToEndParameterizedTest tests
between parameterized and non parameterized
This will be helpful for adding more tests which need not to
be parameterized.
PiperOrigin-RevId: 658353532
This is done by reserving some space for moov box at the start of the file and writing it there if it fits. If it doesn't fit, then it is written at the end of the file.
PiperOrigin-RevId: 643944698
This value is used in a follow-up change to re-order SEI messages
containing CEA-6/708 data from decode order to presentation order.
PiperOrigin-RevId: 643296338
For each item, AudioGraphInput now pads the input audio track with silence
to the duration given in onMediaItemChanged.
Possibly resolves Issue: androidx/media#921 .
PiperOrigin-RevId: 634753721
Add ctts box implementation to handle muxing B-frame videos.
Add method convertPresentationTimestampsToCompositionOffset to
provide sample offsets. Return empty ctts box in case of video
does not contain B-frame. Add ctts box to MoovStructure to handle
muxing the video containing B-frames.
PiperOrigin-RevId: 633537106
AudioGraphInput now accepts a range of inputs, as long as the effects
provided modify the audio to be int 16.
As part of this, add the workaround to DefaultCodec to ensure pcm
encoding is correct, and remove parameterized tests that are not valid.
PiperOrigin-RevId: 631404152
Add ctts box implementation to handle muxing B-frame videos.
Add method convertPresentationTimestampsToCompositionOffset to
provide sample offsets. Return empty ctts box in case of video
does not contain B-frame. Add ctts box to MoovStructure to handle
muxing the video containing B-frames.
PiperOrigin-RevId: 628346257
After this CL, Transformer will throw if the clipping start and end
positions are the same because MediaMuxer doesn't support writing a
file with no samples. This should work once we default to the in-app
muxer.
Issue: androidx/media#1242
PiperOrigin-RevId: 624861950
Reduces flakiness of tests that assert on PCM audio. Tests now have to
clearly choose how they want the capturing muxer to handle pcm audio.
Note that the only dump files that have changed are those that deal
with PCM audio (.wav, sowt, twos, silence). Because of the continuous
nature of PCM, timestamps are not part of the dump.
PiperOrigin-RevId: 623155302
Issue: androidx/media#725
Ideally the test to transmux a `ts` file (having 3 bytes NAL start code)
should go into `Mp4MuxerEndToEndTest`but `Mp4MuxerEndToEndTest` uses `MediaExtractor` and `MediaExtractor` is returning samples with `4 byte NAL start code` which will not exercise the newly added code path.
Hence the test is added in `TransformerWithInAppMuxerEndToEndTest` which
internally uses `media3 extractor` and feeds samples with `3 bytes NAL start code`
only.
PiperOrigin-RevId: 617985866
The new API will take both `creation time` and `modification time`.
Till now, Mp4Muxer wrote `modification time` in both
`creation time` and `modification time` field, which was
incorrect.
PiperOrigin-RevId: 605590623
Earlier implementation compared the whole file against a golden
data. The new implementation compares only the metadata being tested.
This will avoid updating the golden data when any unrelated change
(unrelated to scenario being tested) is made.
Added a separate test to compare the whole output file against a golden data.
PiperOrigin-RevId: 604692985
Before supporting transmuxing when both no op effects and regular rotations are set, move setting the muxerWrapper rotation out of shouldTranscodeVideo() to ensure the muxerWrapper rotation is only set at the appropriate times.
This cl also ensures the state between the muxerWrapper and the list of video effects is consistent by clearing the list of videoEffects in trim optimization. If trim optimisation is being applied, then EditedMediItem.effects.videoEffects only contains no-op effects or regular rotations that get be applied in the muxer wrapper. Therefore, we should clear the list of video effects to ensure that no effect gets applied twice.
PiperOrigin-RevId: 604292052
An audio file can only play sound between two PCM samples (the 'start'
and 'end' of section of a wave form). Therefore when calculating
duration from a count of PCM samples we need to subtract one first (the
'end' sample which has no duration of its own).
This only changes durations by one PCM sample (21us - 22us for 44.1kHz sample
rate).
PiperOrigin-RevId: 596990306
This file is CBR encoded with LAME, so it has an `Info` header (the CBR
equivalent to `Xing`).
A follow-up change will use this file in `Mp3ExtractorTest`.
Issue: androidx/media#878
PiperOrigin-RevId: 595938327
Mp4Muxer does not support out of order B-frames. Currently it
silently writes out of order B-frames, producing an invalid file (with
negative sample durations).
Although `Mp4Extractor` is somehow able to process this invalid file and
`Exoplayer` is able to play it but that is unexpected.
The `sample.mp4` test file contains B frames. Other test files does not
contain `H264 video + AAC audio` format hence created a new test file by
running `sample.mp4` via `Transformer` after applying some effects.
PiperOrigin-RevId: 594016144
