The renderers are currently constructing formats that consist of their
input format with added PCM encoding. Such formats are not self-consistent,
and this only works because DefaultAudioSink ignores the rest of the
format if the format has a PCM encoding. It would not work if the sink
implementation checked the MIME type, for example, which wouldn't be a
strange or incorrect thing for it to do.
The more correct approach is to construct a new format that properly
represents the PCM that will be provided to the sink.
This change also renames supportsOutput to supportsFormat, because
AudioSink itself has both an input and an output side, and this method
is actually evaluating support on the input side of the sink.
PiperOrigin-RevId: 320396089
Previously only pcm encoding were stored in Format,
this was an issue as for audio passthrough and offload
lots of code needs to pass complex format informations
(encoding, sample rate, channel count, gapless metadata)
but could not use Format and each function was taking
each as different parameter.
By allowing Format to contain any encoding, and not only
pcmEncoding, it allows to pass a Format everywhere in ExoPlayer
code that needs a Format.
This patch does not have any functional change. It is only an internal refactor.
PiperOrigin-RevId: 318789444
*** Reason for rollforward ***
Fixed dependent cl was rolled forward
*** Original change description ***
Rollback of 2aac0717d7
*** Original commit ***
Propagate format in supportsOutput
It is needed to know if gapless is needed,
as gapless offload might not be supported.
***
***
PiperOrigin-RevId: 318429321
This removes a lot of duplication from the module configuration,
avoids divergence, and makes sure that only the important differences
to the default are visible in each module file.
PiperOrigin-RevId: 318024823
*** Original commit ***
Propagate format in supportsOutput
It is needed to know if gapless is needed,
as gapless offload might not be supported.
***
PiperOrigin-RevId: 315947888
FFmpeg requires input buffers to be sized larger than the size
of the data they contain. This is to allow optimized decoder
implementations that read data in fixed size chunks, without
the risk of such decoders reading beyond the end of the buffer.
Issue: #2159
PiperOrigin-RevId: 310946866
It makes it harder to work with a different branch. Also make
the FFmpeg instructions consistent with those of the other
extensions (e.g., by removing the "jni" part of the path from
the FFMPEG_EXT_PATH variable.
PiperOrigin-RevId: 310937751
- Fix DecoderAudioRenderer to re-init codec if the DRM session changes.
- Add canKeepCodec to DecoderVideoRenderer. Previously it was assumed
that the decoder could be re-used, but this will not be true in all
cases for FfmpegVideoRenderer.
Issue: #7079
PiperOrigin-RevId: 309935278
- Show renderers with no tracks in EventLogger track logging
- Log renderer names in EventLogger track logging
- Add useful message to ExoPlaybackException instances (including
renderer name for renderer errors)
PiperOrigin-RevId: 302421616
This is a necessary step for Decoder implementations to support
audio and video. MediaCodecRenderer.DecoderException is renamed
MediaCodecDecoderException and extends the new DecoderException
Issue: #2159
PiperOrigin-RevId: 301698238
The restriction that these classes only work with SimpleDecoders
is unnecessary. An FfmpegVideoRenderer will not be able to use a
SimpleDecoder, because the SimpleDecoder assumption that each input
buffer can be decoded immediately into a corresponding output is
not true for all video codecs that Ffmpeg supports (e.g., H264 does
not have this property). Generalizing SimpleDecoderVideoRenderer to
DecoderVideoRenderer will allow FfmpegVideoRenderer to still use
the base class, without having to use a SimpleDecoder.
This is a preliminary change toward being able to merge a version
of https://github.com/google/ExoPlayer/pull/7079.
Issue: #2159
PiperOrigin-RevId: 301412344
The new version fixes some warnings in Gradle builds. Also
add missing indirect compileOnly dependencies to fix some more warnings
Issue:issue:#7007
PiperOrigin-RevId: 298855510
- Fix FLAC extension build (currently broken due to use of std::array,
but fixed by migrating to NDK r20).
- Move opus and ffmpeg extensions to NDK r20. For ffmpeg, upgrade to
release 4.2 which requires using libswresample and updates to the
build script.
Issue: #6601
PiperOrigin-RevId: 277924119
- Simplify the supported formats configuration by moving it to a
separate variable, therefore avoiding updating the COMMON_OPTIONS
variable in the ffmpeg build command.
- Move the ffmpeg build command to a shell script.
PiperOrigin-RevId: 274778232
The current ExoPlayerFactory is growing too big and usage becomes increasingly
complicated because it's not possible to set individual components without
specifying many other defaults.
Adding new builder classes makes building easier and more future-proof.
PiperOrigin-RevId: 263339078
We no longer need two modules as AndroidX-Test takes care of the system
abstraction and we no longer have Robolectric Handler/Looper workarounds.
PiperOrigin-RevId: 262363201
Android considers ALAC initialization data to consider of the magic
cookie only, where-as FFmpeg requires a full atom. Standardize around
the Android definition, since it makes more sense (the magic cookie
being contained within an atom is container specific, where-as the
decoder shouldn't care what container the media stream is carried in)
Issue: #5938
PiperOrigin-RevId: 261124155
We are currently defaulting to targetSdk=1 as no targetSdk is specified. Only
tests which explicitly ask for another SDK use another test SDK. With the
versioned manifest, all tests run using the targetSDK by default.
PiperOrigin-RevId: 249060796
The old domain automatically forwards to the new one. For consistency, change
all doc and code references regardless.
Also adds GitHub CNAME config file which configures our page for the custom
domain.
PiperOrigin-RevId: 243592110
This replaces the deprecated usages of RobolectricTestRunner and
RuntimeEnvironent and fully migrates the tests to androidx.
PiperOrigin-RevId: 238011667
Also add explicit Lint.IfChange/ThenChange rules to make it
clearer what needs to be done when changing one of the code
paths that's accessed via reflection.
PiperOrigin-RevId: 233406709
Also configure the FFmpeg context to ignore errors as far as possible (this
appears to have an effect only for certain decoders).
Issue: #5293
PiperOrigin-RevId: 227851397
Also fix an NPE in FfmpegAudioRenderer if sampleMimeType wasn't set.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=208230947
If compiled with eac3, audio/eac3-joc stream 5.1 bed-channels
can be decoded. The stream will be decoded as 2-D rather than
3-D.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206296930
- Change 'compile' configuration (deprecared) to using 'implementation'
and 'api' configurations instead.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=187311778
I think they're excessively sized also, but changing that
is a little more risky. And we should look at investigating
the input buffer size for all our decoder extensions,
rather than just this one.
Issue: #3120
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=164234087
With this change, it becomes possible to depend on ExoPlayer
locally in settings.gradle by doing:
gradle.ext.exoplayerRoot = 'path/to/exoplayer/root'
apply from: new File(gradle.ext.exoplayerRoot, 'core_settings.gradle')
You can optionally add a prefix onto ExoPlayer's module names
by adding:
gradle.ext.exoplayerModulePrefix = 'prefix'
Issue: #2851
Issue: #2974
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=160277967
It's currently difficult to use ExoPlayer modules in other gradle
projects because they rely on constants and dependencies defined
in our own top level gradle file. This change moves the constants
into a separate file referenced directly from each module. It also
removes the need for the top level gradle file to declare a
dependency on com.novoda:bintray-release. This is now only needed
if "exoplayerPublishEnabled = true" is specified.
Issue: #2851
Issue: #2974
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=160272072
Also add instructions for building arm64-v8a and x86.
Issue: #2561
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=152141270
Notes:
- Now only generating a single module Javadoc task for the
release variant.
- Combined Javadoc now includes extensions. VP9 is excluded
for now since it's failing for an unknown reason.
Issue: #2139
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=150865589
Notes:
- The VP9 one is failing claiming that the util package
doesn't exist and that LibraryLoader cannot be found.
Unsure why, since it appears to be setup exactly like
other extensions (e.g. Opus) that does work.
- @link across modules will not work when generating
Javadoc for a single module. This is WAI. I subsequent
change will add an aggregated Javadoc generator that
will generate Javadoc for all modules together and
apply cross module @link correctly.
Issue: #2139
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=150864273
1. Move entire library from v2/library/ to v2/library/core
2. Add v2/library/all that depends on v2/library/core
Issue: #2139
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=150455693
Note: Depending on the GVR extension via gradle wont work until
we actually push a release
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=150208524
- Use a variable for the (default) minSdkVersion. There will
be more modules that need it, and it'll be easier to manage
if it's in one place.
Issue: #2139
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=150050663
- Add proguard rules for libraries/extensions into .aar files
- Add proguard rules to retain CEA608/708 decoder constructors
- Remove lots of default config from gradle files
- Remove disabling of abort on lint error
- Enable optimizations on release builds of demo app
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=144350233
- Also make some of the naming more concise + misc style cleanup.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=132899979
- Centralise compileSdkVersion, targetSdkVersion and
buildToolsVersion in a single place for gradle.
- Bump compileSdkVersion and targetSdkVersion to 24.
- Bump com.android.tools.build version to re-enable
instant start.
- Bump targetSdkVersion in manifests (needed for
internal builds).
- Use standard expandable_list_item from Android in
the demo app, since ours doesn't look right when
targeting API level 24. We were also setting the
theme on the wrong element in the manifest, so I'm
removing that line.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=131929216
