Fixed by explicitly waiting for the timeline update. This shouldn't be
necessary and will be removed as soon as the correct order of events
can be guaranteed (timeline change -> state change -> onSeekProcessed).
The waiting for the timeline update is implemented by introducing the
feature that the test runner also waits until the action schedule has
finished before stopping the test.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176848540
We've found that in our production environment, the AAC stream's timestamp exceeds the 33bit limit from time to time, when it happens, `peekId3PrivTimestamp` returns a value that is greater than `TimestampAdjuster.MAX_PTS_PLUS_ONE`, which causes a overflow in `TimestampAdjuster.adjustTsTimestamp` (overflow inside `ptsToUs`) after playing for a while . When the overflow happens, the start time of the stream becomes negative and the playback simply stucks at buffering forever.
I fully understand that the 33bit is a spec requirement, thus I asked our stream provider to correct this mistake. But in the mean time, I'd also like ExoPlayer to handle this situation more error tolerance, as in other platforms (iOS, browsers) we see more tolerance behavior.
Also prevent skip when there's a pending reset, and add a
TODO to split/fix chunk discard and downstream format change
reporting.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176760955
This is mostly useful for suppressing the initial position
discontinuity reported by ClippingMediaPeriod.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176758972
This brings ClippingMediaSource clip failures in line with
what MergingMediaSource does when it cannot merge.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176660123
It currently always reports 0, but it should report the position
passed through selectTracks. Reporting should also be disabled if
there's a seekToUs call.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176644228
Parse DASH manifest's publishTime node as defined by ISO/IEC 23009-1:2014,
section 5.3.1.2.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176525922
Until recently, changing primary track formats were reported when the
corresponding media chunk was discarded which always happened immediately
after the sample has been read.
Now, media chunks may be discarded later on or in batches, leaving the
current reporting mechanism broken because changes may never be reported.
This fix separates the discarding from the reporting such that format changes
can be reported when the media chunk is first read from, while the discarding
operation only discards without reporting format changes.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176519071
Currently EventMessage's presentationTimeMs is kept separately in
EventSampleStream. However, EventMessage's presentationTimeMs maybe used in
other places besides EventSampleStream, such as when handling `emsg' messages
targeting the player. This CL let EventMessage object to holds its
presentationTimeMs for such use cases.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176502938
We (eventually - albeit possibly infinitely far in the future)
expect a timeline update with a window of known duration. This
also stops live radio stream playbacks transitioning to ended
state when their tracks are disabled.
As part of this fix, I found an issue where getPeriodPosition
could return null even when defaultPositionProjectionUs is 0,
which is not as documented.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176492024
This allows implementations of those classes to take into account the playback
speed for adaptive track selection and controlling when to resume the player.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176484361
The ExoPlayerImplInternal.reset method now takes the same set of options
as the ExoPlayer.prepare method. This also allows to
- Remove some code duplication within ExoPlayerImplInternal
- Fix calls to prepare(sameSource, resetPosition=true, resetState=false)
with enabled shuffle mode where the position was not correctly reset to the
first period index.
- Keep the current timeline when calling stop (in line with ExoPlayerImpl).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176481878
Currently onTimelineChanged doesn't allow to distinguish easily between the
different reasons why it's being called. Especially, finding
out whether a new media source has been prepared or the current source
refreshed dynamically was impossible without tightly coupling the player
operations with the listener.
The new reasons provide this disdinction by either indicating a newly
initialized media source, a dynamic update to an existing timeline
or manifest, or a reset of the player (which usually results in an
empty timeline).
The original onTimelineChanged method without reason is kept in the
DefaultEventListener as deprecated to prevent the need to update all
existing listeners in one go.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176478701
This causes the player to report that it's started loading
when in the ended state.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176371892
- Properly report internal discontinuities
- Add DISCONTINUITY_REASON_SEEK_ADJUSTMENT to distinguish
seek adjustments from other internal discontinuity events
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176367365
Currently for a DASH ChunkSource that consists of multiple sub-streams, we
always use a CompositeSequenceableLoader, which only allows the furthest behind
loader or any loader that are behind current playback position to continue
loading.
This changes allow clients to have more flexibility when deciding the loading
strategy:
- They can construct a different kind of composite SequenceableLoader from
the sub-loaders, and use it by injecting a different CompositeSequeableLoaderFactory accordingly.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176363870
This class implements MediaClock itself and handles the switching between
renderer and standalone media clock.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176340615
Add Builder pattern to SingleSampleMediaSource and mark existing constructors as
deprecated.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176332964
- MediaSourceTestRunner aims to encapsulate some of the logic
currently used in DynamicConcatenatingMediaSourceTest, so it
can be re-used for testing other MediaSource implementations.
- The change also fixes DynamicConcatenatingMediaSourceTest to
execute calls on the correct threads, and to release handler
threads at the end of each test.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176117535
This test seems to obtain a timeline from a prepared
FakeMediaSource, but that's identical to the timeline
passed into that source to start with :).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176117133
This is helpful for tests which don't care about detailled timeline set-ups
besides the number of windows.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176097369
Add Builder pattern to ExtractorMediaSource and mark existing constructors as
deprecated.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=176088810
This change makes sure progress is being made before reporting
a discontinuity. Else in cases like having no network and
playing a live stream, we allow the discontinuity to be read
each time an internal retry occurs, meaning it gets read
repeatedly. This does no harm, but is noisy and unnecessary.
We should also not allow skipping whilst there is a pending
reset or discontinuity notification, just like we don't allow
reads.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=175953064
Also switch from using MIME types to C.ENCODING_* encodings in DefaultAudioSink.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=175936872
Add Builder pattern to HlsMediaSource and mark existing constructors as
deprecated.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=175803853
The purpose of this change isn't to fix anything. It's just to
simplify things a little bit. There will be following CLs that
make some changes to get things onto correct threads.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=175800354
This allows to remove the LazyMediaSource used within
DynamicConcatenatingMediaSourceTest and also allows to write test which
simulates dynamic timeline or manifest updates.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=175680371
Now we have a ChunkSampleStream.discardBuffer, we need to call
it from SsMediaPeriod as well as for the DASH case.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=175675427
Also replaced the duplicated EMPTY track group array with the one already defined
in TrackGroupArray.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=175670266
Add Builder pattern to SsMediaSource and mark existing constructors as
deprecated.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=175659618
Also added tests which verify the intended behaviour.
GitHub:#3452
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=175656478
This is a step toward retaining a back-buffer in a way that
works for all MediaSource implementations. It's not possible
to adjust the discardBuffer calls in ExoPlayerImplInternal
to discard up to (position - backBufferDurationUs). Next steps
are to:
1. Find an appropriate place to specify the back buffer value,
to be passed to the discardBuffer calls. I guess the
LoadControl is the appropriate place to define such values.
2. Enhance discardBuffer to support a toKeyframe argument to
pass through to discardTo.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=175565363
Add onEnable() and onDisable() call-backs to TrackSelection. This allows
TrackSelection to perform interesting operations (like subscribe to
NetworkStatus) and clean up after itself.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=175558485
Start with DASH MediaSource. The number of injected arguments is getting
out-of-control.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=175529031
This will be needed when retaining a back-buffer. Being able to
query the first index allows us to work out when we've discarded
all samples that were obtained from a particular chunk, which
we'll use to determine when to remove chunks from
ChunkSampleStream.mediaChunks.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=175172085
In the case converting cache files from an earlier version of
SimpleCache, there is no previous version of the index file. If the app
doesn't call any SimpleCache methods which would make the index file
stored before it exists whole data gets lost.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=175153650
These callbacks are executed on the app thread after the corresponding
timeline update was triggered. This ensures that seek operations see the
updated timelines and are therefore valid, even if the seek is performed into a
window which didn't exist before.
GitHub:#3407
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=175136187
When the renderer media clock source read its stream to end but is not ready,
this means one of two things. Either the next period is not prepared yet and
we need to stop the renderers and buffer until it's prepared, or we are
waiting for another track in the current period with a uneven (longer)
duration.
The second case was already covered by this if condition and uses the standalone
clock instead to continue.
The first case now also uses the standalone clock, but it doesn't make a
difference, because both clocks are stopped and still synchronized.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=175134975
MPD file may include multiple EventStreams in its Periods, which contains Events
that the application may need to handle/respond to.
This change adds support for parsing the EventStream/Event nodes from MPD
file, and exposing these EventStreams as a metadata sample stream that application
can respond in a similar way to other metadata events.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=175017697
This CL does not aim to introduce any functionality changes.
Issue:#3149
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=174864875
Removes duplicated code and starts cleaning up handling of media clocks.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=174829840
This prevents users from having to check sideloaded subtitles URLs before
preparing a SingleSampleMediaSource with it.
Issue:#3140
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=174475274
... by making it case insensitive and null-tolerant for schemeId (as was before
adding playlist drm data merging).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=174472123
This is the first CL in a series to add chunkless preparation support.
Also did a bit a tidying up in HlsSampleStreamWrappen and
HlsMasterPlaylistParserTest.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=174461737
This also allows exposing multiple CC channels to any fMP4 extractor client.
Issue:#1661
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=174458725
First fix, prevents forced rewriting when cipher is set but encrypt is
false.
Second, removes the store() call in SimpleCache.initialize() so
initialization doesn't fail because of CachedContentIndex write issues.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=174450586
The mediaChunks.size() > 1 check was supposed to ensure this, and
did roughly the right thing when there was only a single stream
(although it was unnecessarily restrictive in preventing chunk
cancelation for the first chunk, where bytesLoaded != 0 and none
of the samples had been consumed).
Now we have multiple streams the check doesn't do the right thing,
and adding a back-buffer feature will make even more incorrect.
This change switches to checking the condition we actually want
to check directly :).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=174449398
*** Reason for rollback ***
Breaks setting PlaybackParameters before start of playback
*** Original change description ***
Add support for float output in DefaultAudioSink
Also switch from using MIME types to C.ENCODING_* encodings in DefaultAudioSink.
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=174445506
Client can add this functionality by extending DownloadService.
Also made DownloadManager accept multiple listeners. So instead of
broadcast event, client can listen to DownloadManager directly.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=174335820
