This change applies to standalone WebVTT files linked directly from the manifest.
Since DASH only supports stand-alone IMSC1 (TTML) and WebVTT text files, this change concludes the support extension of text-based subtitle files to be parse during extraction.
PiperOrigin-RevId: 577468830
This change applies to standalone TTML files linked directly from the manifest.
As a result, we no longer have the flakiness in the DashPlaybackTest which uses sidecar-loaded (standalone file) TTML subtitles. We experimentally opt into parsing subtitles during extraction and use SubtitleExtractor in hybrid mode.
PiperOrigin-RevId: 577457256
Throws when calling flush when there's no active input, for example
before an input stream is registered or after all output streams have
ended.
PiperOrigin-RevId: 577165419
This CL adds an isPrioritizeImageOverVideoEnabled flag to
TrackSelectionParameters and an API to set the flag value.
The flag will be used by DefaultTrackSelector to determine whether
to select an image track if both an image track and a video track are available.
PiperOrigin-RevId: 576175162
When transmuxing, we usually only need to offset the timestamp by the position of a mediaItem in a sequence.
Trim optimization introduces another type of offset: for the transmux of the second part of the video we need to offset the timestamps by the total duration already trancoded by transformer.
PiperOrigin-RevId: 576134656
The events happens in the following order, assuming two media items:
1. First media item is fully decoded, record the last frame's pts
- Note frame processing is still ongoing for this media item
2. Renderer sends `onOutputFormatChanged()` to signal the second media item
3. **Block sending the frames of the second media item to the `VideoSink`**
4. Frame processing finishes on the first media item
5. The last frame of the first media item is released
6. **Reconfigure the `VideoSink` to apply new effects**
7. **Start sending the frames of the second media item to the `VideoSink`**
This CL implements the **events in bold**
PiperOrigin-RevId: 576098798
Some devices supporting Performance Points for decoder coverage are missing coverage over the CDD requirements for H264. For these cases ExoPlayer should fall back to legacy resolution and frame rate support checks. If there is an H264 stream evaluated as a `PerformancePointCoverageResult` of `COVERAGE_RESULT_NO`, then ExoPlayer checks for coverage of the [720p CDD requirement](https://source.android.com/docs/compatibility/10/android-10-cdd#5_3_4_h_264).
Issue: google/ExoPlayer#10898
Issue: androidx/media#693
PiperOrigin-RevId: 575768836
This change moves the handling of any media button event into
`MediaSessionImpl.onMediaButtonEvent(intent)`. This includes
the double click handling from `MediaSessionLegacyStub`.
The advantage is that everything is in one place which allows
to offer `MediaSession.Callback.onMediaButtonEvent` with which
an app can override the default implementation and handle media
buttons in a custom way.
Media button events can originate from various places:
- Delivered to `MediaSessionService.onStartCommand(Intent)`
- A `PendingIntent` from the notification below API 33
- An `Intent` sent to the `MediaButtonReceiver` by the system dispatched
to the service
- Delivered to `MediaSessionCompat.Callback.onMediaButtonEvent(Intent)`
implemented by `MediaSessionLegacyStub` during the session is active
- Bluetooth (headset/remote control)
- Apps/system using `AudioManager.dispatchKeyEvent(KeyEvent)`
- Apps/system using `MediaControllerCompat.dispatchKeyEvent(keyEvent)`
Issue: androidx/media#12
Issue: androidx/media#159
Issue: androidx/media#216
Issue: androidx/media#249
#minor-release
PiperOrigin-RevId: 575231251
Player methods shouldn't be called if they are not available and the
entry point to the playback resumption flow only checks
COMMAND_PLAY_PAUSE.
#minor-release
PiperOrigin-RevId: 574834148
If an app rejects the connection of the internal media notification manager
the session should behave like without the the media notification controller.
The legacy System UI controller should not be hidden or even rejected to
connect in such a case.
#minor-release
PiperOrigin-RevId: 574807901
Since DEFAULT_MAX_CHANNEL_COUNT was increased from 8 to 10,
getMaxSupportedChannelCountForPassthrough always throws if its loop
enters its second iteration (channelCount of 9). This is due to
Util.getAudioTrackChannelConfig returning CHANNEL_INVALID when passed a
channelCount of 9, and setting CHANNEL_INVALID as the AudioFormat's
channel mask throws an exception.
This change skips each iteration where CHANNEL_INVALID is returned.
HttpEngine was added in Android SDK 34. This DataSource is preferable to the DefaultHttpDataSource if supported as it offers better performance and more modern features.
PiperOrigin-RevId: 574594553
The current formatting makes the 'scheme' part of the list blend into
the definition, especially when the definition is multi-line.
https://developer.android.com/reference/androidx/media3/datasource/DefaultDataSource
I considered adding another level of nesting, but I think bold will
help distinguish the structure of the list without adding too much HTML
or visual whitespace.
#minor-release
PiperOrigin-RevId: 574514208
As Opus decoders skip some bytes prior to playback during a seek, the renderer for bypass playback should send samples to the decoder even if they would be decode-only.
#minor-release
PiperOrigin-RevId: 574494666
This replaces the SimpleBitmapLoader that can now be deprecated
as it's fully unused and doesn't provide any additional functionality.
#minor-release
PiperOrigin-RevId: 574454636
The `PreloadMediaSource` has below two new public methods that suppose to be called by the app:
* `preload(long)` allows the apps to preload the source at the passed start position before playback. The preload efforts include preparing the source for a `Timeline`, creating and caching a `MediaPeriod`, preparing the period, selecting tracks on the period and continuing loading the data on the period.
* `releasePreloadMediaSource()` allows the apps to release the preloaded progress.
The `PreloadMediaPeriod` is designed to facilitate the `PreloadMediaSource` for the preloading work. It has a new package-private method `selectTracksForPreloading` which will cache the `SampleStream` that corresponds to the track selection made during the preloading, and when the `PreloadMediaPeriod.selectTracks` is called for playback, it will uses the preloaded streams if the new selection is equal to the selection made during the preloading.
Also add a shortform demo module to demo the usage of `PreloadMediaSource` with the short-form content use case.
PiperOrigin-RevId: 574439529
This change moves the release timestamp adjustment logic out of
MediaCodecVideoRenderer and into a standalone component, the
VideoFrameReleaseControl. The plan for VideoFrameReleaseControl is to use
it:
- from MediaCodecVideoRenderer, when ExoPlayer plays video in standalone
mode.
- from the CompositionPlayer's DefaultVideoSink, when CompositionPlayer
supports multiple sequences.
- (temporarily) from the CompositionPlayer's custom ImageRenderer while
we are implementing single-sequence preview, which is an intermediate
milestone for composition preview.
PiperOrigin-RevId: 574420427
Media button event coming from the `MediaSessionService` are delegated
to the `MediaSessionImpl` and then sent to the session by using the
`MediaSessionStub` directly instead of using the `MediaController`
API.
Splitting the `MediaController.Listener` and `Player.Listener` in
`MediaNotificationManager` got reverted, and both listener are set to the
controller as before. This reverts the change that introduced a
different timing behaviour. It still holds, that a listener
registered on a `MediaController` that calls a method like `play()` is
called immediately and before the call has arrived at the player. This
change works around this behaviour from the library side by calling
`MediaSessionStub` directly with a `ControllerInfo`.
#minor-release
PiperOrigin-RevId: 573918850
I couldn't work out a good way to set up a test environment with
an asset in a different package, so I'm not adding a test for the
package overriding.
PiperOrigin-RevId: 573843326
Android Auto shows a queue button when the queue is not empty.
Apps were able to remove this queue button with the legacy API
by not setting the queue of the session.
After this change, removing `COMMAND_GET_TIMELINE` from the commands
of the media notification controller or the session player sets the
queue in the platform session to null.
#minor-release
Issue: androidx/media#339
PiperOrigin-RevId: 573813558
This is the documented format of this URI. The previous test was
exercising an undocumented format. Support for the previous format is
kept (and documented) because it seems to be relatively common (despite
the package name not being needed or used).
PiperOrigin-RevId: 573756190
Previously, we calculated the next playlist reload time by adding the target duration (or half of it, depending on whether there is a real update in the new playlist snapshot) from the last load completion time, which makes the reload interval as long as `targetDuration(or half of it) + lastLoadDuration`. While still complying to the standard that "the client MUST wait for at least the target duration before attempting to reload the Playlist file again", this could cause buffering when the playback position is close to the end of live window. This change is to calculate the reload interval accurately by not adding the term `lastLoadDuration`.
Issue: androidx/media#663
#minor-release
PiperOrigin-RevId: 573300009
All production and test callers of the non-incremental methods are
already migrated, so we can remove them in this change too.
#minor-release
PiperOrigin-RevId: 573207318
If the `Subtitle` has 'active' cues at `OutputOptions.startTimeUs`, this
change ensures these are emitted in a `CuesWithTiming` with
`CuesWithTiming.startTimeUs = OutputOptions.startTimeUs`. If
`OutputOptions.outputAllCues` is also set, then another `CuesWithTiming`
is emitted at the end that covers the 'first part' of the active cues,
and ends at `OutputOptions.startTimeUs`.
As well as adding some more tests to `LegacySubtitleUtilWebvttTest`,
this change also adds more tests for `TtmlParser` handling of
`OutputOptions`, which transitively tests the behaviour of
`LegacySubtitleUtil`.
#minor-release
PiperOrigin-RevId: 573151016
All the production code is already calling these new incremental
methods, migrating the tests allows us to remove the old
`List`-returning methods in a follow-up change.
#minor-release
PiperOrigin-RevId: 572822828
PlayerInfo bundling is costly and we can add a shortcut for
in-process binder calls where we store the direct object
reference in a live Binder object that can be written to the
Bundle instead of the individual data fields.
#minor-release
PiperOrigin-RevId: 572816784
A few methods in PlayerInfo and related classes combine filtering
information with bundling in one method. This makes it impossible
to use just the filtering for example and it's also easier to reason
about than two dedicated methods. This change splits these methods
into two parts accordingly.
PiperOrigin-RevId: 572592458
When the controller of the `MediaNotificationManager` is disconnected,
the session is removed from the service without checking whether the
session hasn't already been removed. This caused flakiness in `MediaSessionServiceTest.addSession()`.
Because there is a public API `MediaSessionService.removeSession()`,
the controller can't make an assumption whether the session is still
contained in the service when being disconnected.
#minor-release
PiperOrigin-RevId: 572568350
Looping through all MIME types is a bit hacky, but seems like a nice way
to check "all" MIME types (or at least more than a random selection).
PiperOrigin-RevId: 572508027
This currently only applies to subtitles muxed into mp4 segments, and
not standalone text files linked directly from the manifest.
Issue: androidx/media#288
#minor-release
PiperOrigin-RevId: 572263764
Interrupting the main thread in particular may be dangerous
as the flag is not cleared after handling the current message.
#minor-release
PiperOrigin-RevId: 572259422
This gives access to the replacement behavior for a particular subtitle
format without needing to instantiate a `SubtitleParser`.
#minor-release
PiperOrigin-RevId: 572226084
In particular:
- Add allowAudioNonSeamlessAdaptiveness parameter (default true, same
as video and as already implemented by default)
- Forward mixedMimeTypeAdaptation support to AudioTrackScore
(as for VideoTrackScore) and adapt mixed MIME type adaptive
support accordingly
- Check adaptive support when deciding whether a track is allowed for
adaptation (also same check as for video). This takes the new
parameter into account.
#minor-release
PiperOrigin-RevId: 572191308
When used within the same process, we don't have to go via the
onTransact method (which includes marshalling and unmarhsalling
the data), but can directly return the list.
#minor-release
PiperOrigin-RevId: 572179846
