Unconditionally sleep for offload, if the audio buffer is full.
Previously ExoPlayer would not sleep if the expected wake-up was
in 2s. This was to prevent underrun if the wake-up was delayed.
Experiments have shown that the wakup audio buffer is far more
than 2s (around 1min). Additionally,
the metric was incorrect because it measured both,
AudioTrack + DSP.
Finally, this metric was erroneous after a gapless transition,
when the head position would reset to 0 and thus the computed
delay until next wakeup was too large.
PiperOrigin-RevId: 451383701
*** Original commit ***
Rollback of 57182ac7bd
*** Original commit ***
Remove `@Nullable` from `MediaSource.Factory` setters
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default imple...
***
PiperOrigin-RevId: 450453325
AudioTrack.setOffloadEndOfStream should be called after a track
has been buffered. Additionally, the AudioTrack must be playing.
It has been observed that for very short media (<1s), the AudioTrack
might not have started immediately after the read that buffered
the audio.
In such a situation, calling AudioTrack.setOffloadEndOfStream throws
and playback fails.
Avoid this failure by checking that the AudioTrack is playing before
calling setOffloadEndOfStream.
This means that very short gapless media will not be gapless, this was
deemed acceptable given that such very short media should be very rare
in offload.
PiperOrigin-RevId: 450431146
*** Original commit ***
Remove `@Nullable` from `MediaSource.Factory` setters
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default implementation is only used if the
parameter is `null`.
******
PiperOrigin-RevId: 450410833
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default implementation is only used if the
parameter is `null`.
PiperOrigin-RevId: 450386627
This detection relies on an unsupported workaround and may trigger
permission warnings in tools analyzing permission usage although
no permission is needed or requested by app code.
Given the majority of 5G-NSA playbacks are on API 31+ by now,
we can remove this path to avoid the permission confusion and the
unsupported detection workaround.
PiperOrigin-RevId: 450382586
This causes a bug where the forwarded selections are no longer
assumed equal and the child MediaPeriods will think they need
to reset streams even though the selection stayed the same.
Issue: Issue: google/ExoPlayer#10248
PiperOrigin-RevId: 449454038
We need to pass timestamp for the list of cues so we are defining a new class CueGroup which will store both cues and timestamp.
PiperOrigin-RevId: 449212054
Network type detection on these API levels couldn't be tested
yet because of a missing Robolectric feature. This was fixed by
the recent Robolectric upgrade and the restrictions can be removed.
This also requires to replicate the platform hack we rely on on
these API levels.
PiperOrigin-RevId: 448240431
The TrackSelector is released when the player is released. The
TrackSelector can be reused if TrackSelector.init() is called again.
PiperOrigin-RevId: 446439717
Some APIs from Android 12L were used either via reflection or
constants values were hard-coded. We can now use these APIs directly
since we upgraded the compile SDK version to 32.
PiperOrigin-RevId: 446167543
This is consistent with the IntDef name, and frees up the CONTENT_TYPE_
prefix for the @ContentType values (which are currently just TYPE_*,
and therefore ambiguous with lots of other 'type' values in C).
PiperOrigin-RevId: 445356476
When downlading an adaptive asset, if an ExoPlaybackException happens
during track selection, the player raises an
UnsupportedOperationException which is not handled gracefully and can
crash the app main thread.
This change catches the error and forwards it to
DownloadHelper.Callback.onPrepareError() as an IOException.
PiperOrigin-RevId: 443015332
App code should get all of this information from TrackGroupInfo,
and should only need TrackGroup as a key to use for overrides.
PiperOrigin-RevId: 438840925
The problem is not the IntDef array, it's the fact the lint tool
is unable to correctly infer the annotations on the lambda parameters
without them being explicitly annotated. It seems explicitly annotating
is better than suppressing all IntDef warnings in the whole method.
PiperOrigin-RevId: 437969271
Some infra thinks the if does not protect against API incompatibilities
(example: Android's soong build system). AndroidStudio 2021.3.1 also
signals a warning.
#minor-release
PiperOrigin-RevId: 435027073
*** Original commit ***
Don't call MediaDrm.setLogSessionId in FrameworkMediaDrm
This method throws an UnsupportedOperationException on some Android 12
devices.
***
PiperOrigin-RevId: 433708582
When the start position of a MediaPeriodInfo is equal or higher than the duration,
we set the start position to `duration - 1` to end on the last frame. With server
side inserted ad streams, this has the effect that we actually need to seek back to
the last content frame after a post-roll.
This is desirable when actually ending on that frame but produces a BUFFERING event
when transitioning from an SSAI stream with a post-roll to the next media item in
the playlist. This change sets the start position to the duration when we are
clipping the last content period of an SSAI stream that is played in a playlist.
PiperOrigin-RevId: 433445680
This makes the reading period advance early as expected at the end of an ad
period. Before this change the reading position of the metadata renderer
prevented advancing the period until metadata arrived after the start position of
the following period. Only then the reading position of the metadata renderer
is updated and beyond the start position of the following period which is a
condition to advance the reading period.
Because transitioning to the next period is a virtual transition and the
SharedMediaPeriod keeps reading from the same underlying sample streams, the
metadata renderer can safely be ignored for this check.
#minor-release
PiperOrigin-RevId: 432646037
We will be migrating our track selection UI components to be
based on TracksInfo. We need DownloadHelper to expose TracksInfo
to make it compatible with such components.
PiperOrigin-RevId: 432474487
addTrackSelectionForSingleRenderer takes a list of legacy overrides,
which are then set on the supplied parameters one at a time to run
track selection. This allows multiple overrides for a single track
type to be applied in the download use case, despite it not being
possible to place such overrides directly into a single parameters.
For new style overrides, multiple overrides for the same track type
can be placed directly into a single parameters. Therefore we'll be
able to replace use of addTrackSelectionForSingleRenderer with use
of addTrackSelection, which is a much cleaner API. For this to work,
we need to make DownloadHelper apply multiple overrides in this case.
PiperOrigin-RevId: 432459834
This method is no longer needed since we added SubtitleConfiguration#id
in 59d98b9a4e.
Issue: google/ExoPlayer#10016
#minor-release
PiperOrigin-RevId: 432169262
DownloadHelper is in the ExoPlayer module, so there's no reason
why it can't use ExoPlayer specific track selections. That said,
we want our UI components to operate on generic
TrackSelectionParameters, and we want such UI components to be
useful for selecting tracks for download. To keep this interop,
it's necessary to have DownloadHelper accept generic
TrackSelectionParameters, or to require application code to
convert them. The first approach seems preferable!
PiperOrigin-RevId: 432158846
This constructor always does the wrong thing for non-adaptive groups
containing more than 1 track, because it'll incorrectly generate an
adaptive selection. Replace it with a constructor for specifying a
single track within the group instead.
PiperOrigin-RevId: 431673458
As evidenced by the somewhat awkward logic in PlayerControlView, the
previous design wasn't very friendly to expected usage. There will be
more usage when the track selection dialog components are migrated,
which would be similarly awkward without this change.
PiperOrigin-RevId: 431407675
*** Original commit ***
Rollback of 8d9c4f4774
*** Original commit ***
Rollback of 43b796b64d
*** Original commit ***
Rollback of 08c5b1cb0a
*** Original commit ***
PiperOrigin-RevId: 430905772
The AsyncronousMediaCodecAdapter should call MediaCodec.start()
on the same thread it calls MediaCodec.flush(), i.e. the playback
thread. This change removes the experimental flag that allowed
calling MediaCodec.start() from the callback thread.
The flag was flipped to true already.
PiperOrigin-RevId: 430689665
This can fix the following warning caused by commit a7aa84a:
Warning: com.google.android.exoplayer2.drm.UnsupportedDrmException.Reason:
The typedef annotation should have @Retention(RetentionPolicy.SOURCE)
Author: Tony Guo <tony.guo.peng@gmail.com>
Date: Mon Feb 28 10:56:52 2022 +0800
getCurrentTrackGroups and getCurrentTrackSelections are
retained for now, but moved from Player to ExoPlayer, to
ease the transition for some application code that currently
uses these methods.
PiperOrigin-RevId: 430036355
*** Original commit ***
Rollback of 43b796b64d
*** Original commit ***
Rollback of 08c5b1cb0a
*** Original commit ***
Wire up MediaMetricsListener and add configuration to...
***
PiperOrigin-RevId: 429585773
The track type is derived solely from the content. It does
not depend on any runtime properties such as the player's
capabilities of user track selection. Hence it belongs in
TrackGroup rather than TrackGroupInfo.
Note that this avoids TrackSelectionOverride from having to
re-derive the track type internally.
PiperOrigin-RevId: 429303312
We need TracksInfo.hasTracksOfType to determine which tabs to
display in TrackSelectionDialog.
We need TrackGroupInfo.isAdaptiveSupported to determine whether
to allow multiple selection (check boxes) or not (radio buttons).
PiperOrigin-RevId: 428793739
This change makes sure played server side ads are skipped in a single period
timeline. It avoids creating an ad-MediaPeriodInfo for played postrolls and
creates a content info instead. It also sets the end position for content infos
that terminate the stream before the stream is actually finished. This prevents
the player from continue playing the remaining media delivered by the
MediaPeriod.
We also make sure that the discontinuity of played ads are not reported because
there is actually no discontinuity.
#minor-release
PiperOrigin-RevId: 428734387
The last used shared media period is reused after all media periods have been
released. In case the sample streams are already filled up, they need to be
reset or they download samples from the current position up to the seek
position. This causes long buffering states or load stuck exceptions.
A seek when reusing the shared period takes care for reseting the period or
internally seeks to the current position in the already available samples.
#minor-release
PiperOrigin-RevId: 428484187
We have two ways to choose the minDurationForQualityIncreaseMs value in
AdaptiveTrackSelection: use the configured value for non-live or when
enough buffered data is available, or use a fraction of the available
duration to allow switching when playing close to the live edge.
The decision point when to use which value isn't quite consistent because
we compare against availableDurationUs before making the adjustments. This
means there is range of values where no up-switching is possible despite
perfect buffering. Fix this by choosing the minimum of both values.
Issue: google/ExoPlayer#9784
#minor-release
PiperOrigin-RevId: 428474332
Ignorable ad periods are skipped to resolve the media period id with the
ad playback state of the resulting period. In case of a change in the period
position un-played ad periods are rolled forward to be played.
PiperOrigin-RevId: 428011116
This adds some missing calls to verifyApplicationThread to
ExoPlayerImpl.
Now all public methods start with this call, except listener
registrations because registration after construction on a background
thread is allowed and supported.
PiperOrigin-RevId: 428009498
All the functionality of SimpleExoPlayer has moved to ExoPlayerImpl.
Hence, ExoPlayerImpl can fulfil its own name and become an ExoPlayer
implementation. As a result, ExoPlayer.Builder can return ExoPlayerImpl
directly without using SimpleExoPlayer at all.
#minor-release
PiperOrigin-RevId: 427947028
And also add a test that all Player.Listener events are forwarded
to AnalyticsListener.
The AnalyticsCollector also needlessly implemented
Video/AudioRendererEventListener, which is not needed because all of
the equivalent methods are called directly and never through the
interface.
#minor-release
PiperOrigin-RevId: 427478000
There are two sets of listeners in ExoPlayerImpl at the moment,
which can be merged together to use a single ListenerSet. This has
the added advantage that the events that were previously sent
through the ArraySet get additional guarantees provided by ListenerSet
(e.g. correct event ordering and onEvents triggered).
Also add missing constants for onEvents to ensure all Player.Listener
methods have an corresponding constant.
#minor-release
PiperOrigin-RevId: 427415349
This brings listener invocations closer together and removes
unnecessary methods.
Also fixes a bug where a change in track selection parameters only
queued a callback but never flushed it to actually inform the
listeners.
#minor-release
PiperOrigin-RevId: 427201691
In some cases (whose where we previously used EventListener),
AnalyticsCollector is registered as a listener to receive updates,
in other cases it is called directly.
Avoid this inconsistent handling by registering it as normal listener
and removing all callbacks that are handled by the normal listener flow.
The remaining direct usages of AnalyticsCollector calls are those
callbacks that have no equivalent in Player.Listener.
#minor-release
PiperOrigin-RevId: 427201525
With this change, MediaCodecAudioRenderer always configures MediaCodec
with max output channels set to 99 on API 32+.
#minor-release
PiperOrigin-RevId: 427192801
SimpleExoPlayer used to register a listener on ExoPlayerImpl for
the old EventListener callbacks. Now both classes are merged, this is
no longer needed and should be removed in favor of calling methods
directly.
#minor-release
PiperOrigin-RevId: 427187875
We have logic to not immediately interrupt playback when an ad group
fails to load and instead let the current content play and transition
at the point where the ad group should have been.
This logic was broken by dcbdbe5341 because of one of the conditions
used MediaPeriodId.adGroupIndex, which is always -1 for content ids.
It still worked for the last ad group because the next ad group index
was C.INDEX_UNSET.
Fix the issue and amend the test that was meant to catch this to test
the ad failures for the last ad and previous ads.
Also fix the PositionInfo reported in such a case, which was also wrong.
Issue: google/ExoPlayer#9929
#minor-release
PiperOrigin-RevId: 427143223
*** Original commit ***
Rollback of 9b8ed581d0
*** Original commit ***
Add missing imports to ExoPlayerImpl
These were missed in 3bb0210d22
#minor-release
***
***
PiperOrigin-RevId: 427131696
*** Original commit ***
Rollback of 08c5b1cb0a
*** Original commit ***
Wire up MediaMetricsListener and add configuration to disable it.
The listener will automatically forward diagnostics info to the
Android platform. ExoPlayer.Builder gets a new setter that allows
to disable this feature if required.
#...
***
PiperOrigin-RevId: 427131438
*** Original commit ***
Rollback of 3bb0210d22
*** Original commit ***
Move SimpleExoPlayer logic into ExoPlayerImpl
This makes SimpleExoPlayer a simple forwarding wrapper which can be
removed in the future.
The changes are all purely mechanical with none of the potential further
simplifications made yet...
***
PiperOrigin-RevId: 427131338
*** Original commit ***
Move SimpleExoPlayer logic into ExoPlayerImpl
This makes SimpleExoPlayer a simple forwarding wrapper which can be
removed in the future.
The changes are all purely mechanical with none of the potential further
simplifications made yet. The only exceptions are name clashes where
either EPI or SEP was calling a method in one of the classes and both
classes had different implementations for the same method name. In these
cases we needed to disambiguate between the two different
implementations (e
***
PiperOrigin-RevId: 426997821
