`SurfaceTexture` provides a transform matrix with each buffer. Previously
gldemo ignored this but it is important to apply it to have the video render
properly.
The transformation matrix from the surface texture includes flipping so this
change removes the hard-coded flipping from `a_texcoord`.
Issue: #8992
#minor-release
PiperOrigin-RevId: 377271389
Add the `needsReconfiguration` API on the `MediaCodecAdapter` interface so that `MediaCodecRenderer` can reconfigure the `MediaCodec` in case a `MediaCodecAdapter` needs to be reconfigured immediately after being obtained from the `MediaCodecAdapter.Factory`.
PiperOrigin-RevId: 376944334
A renderer is disabled (without being reset) in two situations:
* When transitioning into a period that starts with a discontinuity
* When stopping the player with setForegroundMode(true)
Before this change the behaviour of `MediaCodecRenderer` when disabled
(but not reset) depended on whether the content being decoded had an
associated `DrmSession`:
* For content without an associated DRM session the MediaCodec instance
was kept alive.
* For content with an associated DRM session, the MediaCodec instance
was released. This was to prevent the DRM session from staying alive
and continuing to make license refresh network requests while the
player was stopped in 'foreground mode'.
This change removes the second bullet, and keeps MediaCodec instances
alive in both the secure and insecure case. This will result in the
DRM machinery making occasional license refresh network requests (at
a frequency defined by the license policy) while the player is stopped
and in 'foreground mode'. This network usage is considered to be a
'limited resource' as described by the `ExoPlayer#setForegroundMode`
javadoc.
This means that switches between secure content (or between secure and
clear content when `MediaItem.drmConfiguration.sessionForClearTypes`
indicates a secure decoder should be used for clear content) should
keep the same video decoder, thus avoiding the 'black flash' that occurs
on some devices when switching the surface away from a secure decoder.
Issue: #8842
#minor-release
PiperOrigin-RevId: 376825501
This change introduces a third 'state' for `DefaultDrmSessionManager`:
It's been fully released (prepareCount == 0) but at least one of its
sessions is still active.
In this state new acquisitions are rejected (`(pre)acquireSession()`
calls will fail) but the machinery to support the existing sessions
(ExoMediaDrm and MediaDrmHandler) is kept until they're all released.
This change will allow us to remove the TODO in MediaCodecRenderer
that resolves Issue: #8842.
PiperOrigin-RevId: 376193952
Many of the setters are ignored unless others are set - this change:
* Lists these conditions exhaustively.
* Uses more concise language to avoid overshadowing the main details
of what the setter sets.
* Tweaks the language from 'is ignored' to 'shouldn't be called', to
open up the future possibility of throwing an error if these are
called without the 'required' setter also being present (see
Issue: #8957).
#minor-release
PiperOrigin-RevId: 376162385
Authentication sequence in RTSP:
- Server replies "Unauthorized" to our DESCRIBE request, and includes the
necessary information (i.e. realm, digest nonce, etc) in WWW-Authenticate
header
- After `RtspClient` receives the response, we
- Parse the WWW-Authenticate header, stores the auth info. The info is saved
for all further RTSP requests (that all need to carry authorization headers)
- send the second DESCRIBE request with the Authorization header.
#minor-release
PiperOrigin-RevId: 376116302
We need to avoid reading and skipping into preload chunks as they
may need to be discarded. The current code iterates over all chunks,
but this can be simplified by just checking the last chunk knowing
that the preload chunk must always be the last one.
As a result, we avoid calling getFirstSampleIndex on all chunks. This
is a bug since the method is not allowed to be called for chunks
that have been spliced in. This still leaves the smaller issue of
potentially calling this method for spliced-in preload chunks, which
will be solved separately.
Issue: #8937
#minor-release
PiperOrigin-RevId: 375053638
Gradle warns against passing a relative path to `new File(String)`:
https://docs.gradle.org/current/userguide/working_with_files.html#sec:single_file_paths
This change fixes all usages of `exoplayerRoot` to pass it to Gradle's
`Project.file()` first, which returns an absolute `File`.
To reproduce the problem in Issue: #8927:
1. Checkout ExoPlayer git project, to e.g. `~/ExoPlayer/exoplayer-git`
2. Create a new Android Studio project in e.g. `~/AndroidStudioProjects/exoplayer-test`
3. Edit the new project's `settings.gradle` file as described in
https://github.com/google/ExoPlayer/blob/release-v2/README.md
using a relative path for `exoplayerRoot`:
```
gradle.ext.exoplayerRoot = '../../ExoPlayer/exoplayer-git'
```
4. In a shell:
```bash
$ cd ~/AndroidStudioProjects/exoplayer-test/app
$ ../gradlew build
```
(Step 4 is important, it seems running `./gradlew` from the project root
doesn't trigger the relative path problem)
This change fixes the problem, and also works with `exoplayerRoot` as a
`File` or `Path` object. `String`, `File` and `Path` all work with relative or
absolute paths:
```
gradle.ext.exoplayerRoot = '/home/ibaker/ExoPlayer/exoplayer-git'
gradle.ext.exoplayerRoot = '../../ExoPlayer/exoplayer-git'
gradle.ext.exoplayerRoot = new File('/home/ibaker/ExoPlayer/exoplayer-git')
gradle.ext.exoplayerRoot = new File('../../ExoPlayer/exoplayer-git')
gradle.ext.exoplayerRoot = Paths.get('/home/ibaker/ExoPlayer/exoplayer-git')
gradle.ext.exoplayerRoot = Paths.get('../../ExoPlayer/exoplayer-git')
```
Note: The Path versions above require importing `java.nio.file.Paths`
and changing the `apply from:` line in the project's settings.gradle
file to something like:
```
apply from: file(gradle.ext.exoplayerRoot.resolve('core_settings.gradle'))
```
It's assumed that a project wanting to pass a `Path` will make these
changes.
Issue: #8927
PiperOrigin-RevId: 374421627
In Android 12 mutability flags have to be set on PendingIntents. If they are not, and the app targets Android 12, then the app will be crashed by the system.
PiperOrigin-RevId: 373427591
Content after ad groups currently always resumes at the ad break position (unless
overridden by a seek or similar). In some cases, media inserting ads wants to
specify an offset after the ad group at which playback should resume. A common
example is a live stream that inserts an ad and then wants to continue streaming
at the current live edge.
Support this use case by allowing ad groups to specify a content resume offset
and making sure that the content start position after the ad group uses this offset.
PiperOrigin-RevId: 373393807
The player already supports changing durations of periods and ads.
The only thing not yet supported is a change in ad break positions
which changes the duration of clipped content ending in an ad break.
Adding support for this requires updating the end position in
MediaPeriodInfo and changing the clip end position of the respective
ClippingMediaPeriod.
Issue: #5067
PiperOrigin-RevId: 373139724
All `add*Listener` and `add*Output` methods are
deprecated in favor of `addListener`.
As for the class themselves `VideoListener` and
`AudioListener` are not used internaly by ExoPlayer,
`VideoRendererEventListener`
and `AudioRendererEventListener` are use in their
place.
As a result `VideoListener` and `AudioListener`
can be deprecated in favor `Listener`.
On the other hand `TextOutput` and `MedataOutput`
are used both in the player interface and internally in
renderers.
This means that those class can't be deprecated.
There usage in the public interface are indirectly
deprecated as their is no way to use them without
using the deprecated `add*Output`.
Thus it's not an issue that the class themselves are
not deprecated.
#minor-release
PiperOrigin-RevId: 371318268
Imported from GitHub PR https://github.com/google/ExoPlayer/pull/8858
Fix bug in text alignment inheritance where child does not correctly inherit ancestor's setting
@icbaker
Merge 70eb4bceb73b3f07e2f8d545b4fa7961189ac52a into 45616f916b
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/ExoPlayer/pull/8877 from dlafayet:multirowalign-cue d942b50a40525fea5d11b35a33d3bbc512550960
PiperOrigin-RevId: 371306966
Move VideoSize in the common module and have the Player return it.
`Listener` and `AnalyticsListener` `onVideoSizeChanged` are updated
with the old method deprecated.
`VideoRendererEventListener.onVideoSizeChanged` was also migrated to
`VideoSize` but the old method is removed, not deprecated.
This is because:
- apps calling/listening to this method is a rare and niche use-case.
- it would introduce hard to diagnostic issues where if only the caller
or the callee is updated to use the new method, the event will be lost.
This doesn't occur with the other 2 listeners as the caller is always
in ExoPlayer library and was updated to call both the old and new methods.
VideoSize is used everywhere except in `Format` as this would lead to
too much refactoring and backward compatibility breakage for little gain.
#minor-release
PiperOrigin-RevId: 371087419
Add method getAvailableCommands() in Player interface to return
the available commands. Method isCommandAvailable() moved to
BasePlayer since it can be implelented by calling
getAvailableCommands().
PiperOrigin-RevId: 370059328
A subsequent change will make the UI module access
SphericalGLSurfaceView and VideoDecoderGLSurfaceView
using reflection, now we're at the point where we only
need to reflect the constructors.
PiperOrigin-RevId: 369630102
The protected visibility causes problems in Kotlin (Issue: #8830) and
also prevents a subclass of AdaptiveTrackSelection.Factory that isn't
nested inside a subclass of AdaptiveTrackSelection (in both Java and
Kotlin).
#minor-release
PiperOrigin-RevId: 369468841
The original cl has been fixed by not implementing
VideoListener but Player.Listener in
StyledPlayerView.
VideoFrameMetadataListener and CameraMotionListener are still part
of the Player interface as a good way to break the UI dependency
on them has not yet been finalised.
PiperOrigin-RevId: 369417682
This change moves the responsibility of creating, configuring and starting the MediaCodec from the MediaCodecRender to the MediaCodecAdapter.Factory.
This move allows ExoPlayer's client to decide how and when codecs are created and/or reused.
To allow the move, this CL replaces MediaCodecRenderer.ConfigureCodec with MediaCodecRenderer.getCodecConfiguration
PiperOrigin-RevId: 369273887
*** Original commit ***
Move VideoComponent in ExoPlayer
VideoFrameMetadataListener and CameraMotionListener are still part
of the Player interface as a good way to break the UI dependency
on them has not yet been finalised.
***
PiperOrigin-RevId: 369194309
VideoFrameMetadataListener and CameraMotionListener are still part
of the Player interface as a good way to break the UI dependency
on them has not yet been finalised.
PiperOrigin-RevId: 368863829
Other properties of SphericalGLSurfaceView (e.g., setDefaultStereoMode)
are not plumbed through the PlayerView components, and it doesn't scale
to plumb through all properties of all of the SurfaceView types.
Applications can instead do:
```
((SphericalGLSurfaceView) playerView.getVideoSurfaceView())
.setUseSensorRotation(useSensorRotation);
```
PiperOrigin-RevId: 368196537
This brings in another fix for `NullPointerExceptions` within `WebView` callbacks in the IMA SDK, related to companion ads.
Issue: #8447
#minor-release
PiperOrigin-RevId: 367591047
- Take centerControls padding into account to prevent switching to
minimal mode too soon
- Disable clipping to padding to avoid the edges of controls from
being clipped as the view gets smaller
Issue: #8763
PiperOrigin-RevId: 366966298
This ensures BUFFER_FLAG_DECODE_ONLY is set on samples that are
before the playback start position, in the case that the queue
is created after the start position is set.
#minor-release
PiperOrigin-RevId: 366249188
When playing TrueHD streams, it's possible that the first decoded
buffer is empty, and that the channel count and sample rate are
still unknown. To correct for this, defer determining the format
until a buffer that will actually be output from the decoder has
been obtained, and only then query the channel count and sample
rate.
Issue: #8616
#minor-release
PiperOrigin-RevId: 366246245
The exo_controls_background view is supposed to fill its parent,
and so previously used match_parent to do this. However, if the
parent uses wrap_content for its own dimensions, the constraints
being specified become somewhat ambiguous. The parent is supposed
to be sizing itself to wrap its children, and one of the children
is supposed to be sizing itself to match the parent.
Intuitively for this case, you'd hope that the layout logic would
size the parent to wrap its other children, and that the
match_parent child would then fill the parent with its determined
size. That's not what happens, and instead the parent ends up
expanding to occupy all of the space available to it.
This commit sets the exo_controls_background view's dimensions
to be 0dp in the layout, to stop it from influencing the size of
the parent. It's then expanded to fill the parent in code.
Issue: #8726
#minor-release
PiperOrigin-RevId: 364868301
Null was an alias for DEFAULT. Remove this for nullness
safety in the API.
The ExoPlayer implementation still checks for null and
replaces it by DEFAULT, so this is ABI compatible.
PiperOrigin-RevId: 364370017
This change fixes playback of playlists where segments have the
extension and Content-Type of JPEG pictures (although in reality)
they are transport streams. File inferrence before this change will
cause an exception when assuming the inferred file type is one of
the allowed HLS containers.
#minor-release
Issue: #8733
PiperOrigin-RevId: 363641277
This makes HLS playback less liable to become stuck if discontinuity
tags are inserted at different times across media playlists.
Issue: #8700
Issue: #8372
PiperOrigin-RevId: 362903428
According to the spec (section 8.4.2), high numeric values represent low
priorities, so we need to flip this sort.
Issue: #8704
#minor-release
PiperOrigin-RevId: 362558370
`ImaAdsLoader` clears its `AdPlaybackState` when it's released but this could
cause `AdsMediaSource` to look up information in the ad playback state that is
no longer in bounds.
Issue: #8693
#minor-release
PiperOrigin-RevId: 362556286
Adds a new Listener that extends all other listener.
This is part of the component flattening goal.
After components have been flattened in Player,
and clients transitioned, existing listeners will be deprecated.
PiperOrigin-RevId: 362287507
In a period transition we pass the start time of the next period, for
the final period we pass the duration of the period or timeline, if
known.
This means sideloaded subtitles now respect the end point of
ClippingMediaSource and ensures that content subtitles aren't
incorrectly displayed over mid-roll ads.
When transitioning back into the subtitled content the subtitles still
appear slightly before the video transitions, meaning the first subtitle
of the content is shown with the last few frames of the ad. Resolving
this in a way that doesn't break anything else requires a deeper
investigation.
Issue: #5317
Issue: #8456
#minor-release
PiperOrigin-RevId: 361797118
MaskingMediaSource needs to resolve the prepare position set for a MaskingPeriod
while the source was still unprepared to the first actual prepare position.
It currently assumes that the period-window offset and the default position is
zero. This assumption is correct when a PlaceholderTimeline is used, but it
may not be true if the real timeline is already known (e.g. when re-preparing
a live stream after a playback error).
Fix this by using the known timeline at the time of the preparation.
Also:
- Update a test that should have caught this to use lazy re-preparation.
- Change the demo app code to use the recommended way to restart playback
after a BehindLiveWindowException.
Issue: #8675
PiperOrigin-RevId: 361604191
- Avoid having two onPositionDiscontinuity events (seek and transition)
sent after a seek to another media item.
- Avoid triggering an onPositionDiscontinuity event after a timeline
change.
#minor-release
PiperOrigin-RevId: 361092914
