It currently wrongly documents that it is only called before reading
streams (that has never been the case and all MediaPeriods already need
to handle calls after reading samples from the streams).
It was also a bit unclear what a discontinuity implies and the new
Javadoc calls out the main use case for discontinuties and the intended
meaning of returning a discontinuity.
#minor-release
PiperOrigin-RevId: 543989124
MP4 edit lists sometimes ask to start playback between two samples.
If this happens, we currently change the timestamp of the first
sample to zero to trim it (e.g. to display the first frame for a
slightly shorter period of time). However, we can't do this to audio
samples are they have an inherent duration and trimming them this
way is not possible.
#minor-release
PiperOrigin-RevId: 543420218
*** Original commit ***
Mark output sample as decode-only based on start time
We currently do the same check on the input timestamps and
expect the output timestamps to match. Some codecs produce
samples with modified timestamps and the logic is a lot safer
when the comparison with the start time is done on the output
side of the codec.
Issue: google/ExoPlayer#11000
***
PiperOrigin-RevId: 543379665
This change uses this new method everywhere we currently `instanceof`
check an `Extractor` directly. This allows us to introduce
wrapping/delegating `Extractor` instances - because the `instanceof`
checks will continue to operate on the underlying instance.
HLS is a slightly different case, because it directly re-instantiates
`Extractor` instances, which is not compatible with an arbitrary
wrapping structure. Luckily the only `Extractor` instances that HLS
re-instantiates do not support muxed subtitles, so won't be wrapped
in the first place (although future changes might use the
delegating-`Extractor` pattern for other purposes, which might affect
HLS).
PiperOrigin-RevId: 542550928
Devices pre-API 33 are not able to comprehend the position reset that occurs by the HAL in offloaded gapless track transitions.
PiperOrigin-RevId: 542503662
When an app tried to re-prepare a live streeam with server side inserted
ad after a playback exception, the player tried to find the ad group by
its index in the ad playback state of the next timeline when creating
the first period.
If a source that supports server side ad, has removed the ad playback
state when the source has been removed, this causes a crash. For live
streams this is a reasonable thing to do given the exception could be
caused by an invalid ad playback state.
This change removes the ad metadata from the current period for live
streams and the timeline. In case the ad playback state is not reset
by the source, the first timeline refresh would ad the metadata again.
PiperOrigin-RevId: 541959628
Some events may arrive after the playlist is cleared (e.g. load
cancellation). In this case, the DefaultPlaybackSessionManager may
create a new session for the already removed item.
We already have checks in place that ignore events with old
windowSequenceNumbers, but these checks only work if the current
session is set (i.e. the playlist is non-empty). The fix is to add
the same check for empty playlists by keeping note of the last
removed window sequence number.
PiperOrigin-RevId: 541870812
Instead of providing `playbackDurationUs` and `loadPositionUs` individually, which are used to calculate the buffer duration for CMCD logging, we can directly pass the pre-calculated `bufferedDurationUs` available in the `getNextChunk` method of the chunk source classes.
Issue: google/ExoPlayer#8699
#minor-release
PiperOrigin-RevId: 540630112
The APIs /related fields for playback suppression due to unsuitable output should be renamed from '..SuppressPlaybackWhenNoSuitableOutputAvailable' to '..SuppressPlaybackOnUnsuitableOutput'
PiperOrigin-RevId: 540555715
*** Original commit ***
Rollback of 2a6f893fba
*** Original commit ***
Set video size to 0/0 when video render is disabled
In terms of MCVR wi...
***
PiperOrigin-RevId: 540525069
The existing NullableType has been deprecated 5 years ago and causes
crashes in Kotlin apps because Kotlin doesn't recognize this annotation
as a nullable type annotation.
While we can't align on a single @Nullable annotation yet, we can at
least replace this one by JSR305's @Nonnull(MAYBE) as it fulfils all
requirements, including full Kotlin compatiblity. To avoid the
cumbersome name, we can redefine it as our own @NullableType
annotation. (We can't use @Nullable to avoid name clashes with the main
@Nullable annotation from AndroidX)
Issue: google/ExoPlayer#6792
PiperOrigin-RevId: 540497469
These comments reflect the parameter names of the constructor that
we're reflectively calling, but errorprone complains that they don't
match the parameter names of `Constructor.newInstance`.
PiperOrigin-RevId: 540348118
Previously `AsynchronousMediaCodecCallback.mediaCodecException` was
cleared when flushing completed. This behaviour was changed in
aeff51c507
so now the exception is not cleared.
The result after that commit was that we would **only** suppress/ignore
the expression if a flush was currently pending, and we would throw it
both before and after the flush. This doesn't really make sense, so this
commit changes the behaviour to also throw the exception during the
flush.
This commit also corrects the assertion in
`flush_withPendingError_resetsError` and deflakes it so that it
consistently passes. The previous version of this test, although the
assertion was incorrect, would often pass because the
`dequeueInputBuffer` call would happen while the `flush` was still
pending, so the exception was suppressed.
#minor-release
PiperOrigin-RevId: 540237228
We currently do the same check on the input timestamps and
expect the output timestamps to match. Some codecs produce
samples with modified timestamps and the logic is a lot safer
when the comparison with the start time is done on the output
side of the codec.
Issue: google/ExoPlayer#11000
PiperOrigin-RevId: 540228209
With playback suppression in place, the devices can be added when the playback on ExoPlayer is in the suppression state. Also, it is quite possible that a suitable audio output device on which playback is ongoing gets removed requiring the Player to pause the playback. These requirements can be fullfilled using AudioDeviceCallbacks which has been implemented with this change.
PiperOrigin-RevId: 539559193
In case the player is reset while a live stream is playing, the current
period needs to be a placeholder. This makes sure that the default start
position is used when the first live timeline arrives after re-preparing.
#minor-release
PiperOrigin-RevId: 539044360
Add support for including Common Media Client Data (CMCD) in the outgoing requests of adaptive streaming formats DASH, HLS, and SmoothStreaming.
API structure and API methods:
* CMCD logging is disabled by default, use `MediaSource.Factory.setCmcdConfigurationFactory(CmcdConfiguration.Factory cmcdConfigurationFactory)` to enable it.
* All keys are enabled by default, override `CmcdConfiguration.RequestConfig.isKeyAllowed(String key)` to filter out which keys are logged.
* Override `CmcdConfiguration.RequestConfig.getCustomData()` to enable custom key logging.
NOTE: Only the following fields have been implemented: `br`, `bl`, `cid`, `rtp`, and `sid`.
Issue: google/ExoPlayer#8699
#minor-release
PiperOrigin-RevId: 539021056
This CL introduces the new public API setSuppressPlaybackWhenUnsuitableOutput which if set to TRUE will cause suppression of a requested playback if that is going to happen on an unsuitable audio output (e.g. builtin speaker on a WearOS device).
PiperOrigin-RevId: 538867212
*** Original commit ***
BEGIN_PUBLIC
Set video size to 0/0 when video render is disabled
In terms of MCVR with a `VideoRendererEventListener`, the video size is set to
0/0 right after `onVideoDisabled()` is called and is set to the actual size as
soon as the video size is known after 'onVideoEnabled()`.
For ExoPlayer and in terms of the `Player` interface, `Player.getVideoSize()`
returns a video size of 0/0 when `Player.getCurrentTracks()` does not support
`C.TRACK_TYPE_VIDEO`. This is ensured by the masking behavior
***
PiperOrigin-RevId: 537938947
With `AudioOffloadModePreference` `AUDIO_OFFLOAD_MODE_PREFERENCE_REQUIRED`, the `DefaultTrackSelector` will select a single audio track that it finds is offload compatible. If not any audio track is supported in offload, then no track will be selected.
PiperOrigin-RevId: 537877183
Otherwise, texture output errors out if video decoding decodes faster than audio,
hitting the end of the file, while audio is still in the middle of the file.
PiperOrigin-RevId: 536679568
*** Original commit ***
ExoPlayer: Add setVideoFrameProcessorFactory().
This allows apps to use a custom VideoFrameProcessor implementation for video
playback. This may be useful, for example, when outputting to a texture.
***
PiperOrigin-RevId: 536391597
This change moves the default logic into the actual Player
implementations, but does not introduce any behavior changes compared
to addMediaItems+removeMediaItems except to make the updates "atomic"
in ExoPlayerImpl, SimpleBasePlayer and MediaController. It also
provides backwards compatbility for cases where Players don't support
the operation.
Issue: google/ExoPlayer#8046
#minor-release
PiperOrigin-RevId: 534945089
This change removes it from `Player.Listener` and `AnalyticsListener`,
use `onPositionDiscontinuity` with `DISCONTINUITY_REASON_SEEK` instead.
#minor-release
PiperOrigin-RevId: 534757426
Added piping to present offload support from the audio sink to the renderer and track selection. Applications can set offload mode preference and with both sink support and compatible track selection, renderer will be configured for offload.
PiperOrigin-RevId: 534450534
This allows apps to use a custom VideoFrameProcessor implementation for video
playback. This may be useful, for example, when outputting to a texture.
PiperOrigin-RevId: 534044831
The methods in ExoPlayerImpl and MediaControllerImplBase that determine
the new PlayerInfo/PlaybackInfo currently have a hard-to-reason-about
setup where the method generating the new info accesses other methods
that rely on the existing class field instead of working with the
passed in PlayerInfo/PlaybackInfo. This prevents reuse of the util
methods (e.g. for replaceMediaItems) because they access potentially
stale state.
This change untangles these methods a bit by making the util methods
either static or at least ensure that they don't rely on existing
class fields of PlayerInfo/PlaybackInfo. Overall, the change is a
complete no-op.
#minor-release
PiperOrigin-RevId: 534036633
In terms of MCVR with a `VideoRendererEventListener`, the video size is set to
0/0 right after `onVideoDisabled()` is called and is set to the actual size as
soon as the video size is known after 'onVideoEnabled()`.
For ExoPlayer and in terms of the `Player` interface, `Player.getVideoSize()`
returns a video size of 0/0 when `Player.getCurrentTracks()` does not support
`C.TRACK_TYPE_VIDEO`. This is ensured by the masking behavior of
`ExoPlayerImpl` that sets an empty track selection result when the playing
period changes due to a seek or timeline removal.
When transitioning playback from a video media item to the next, or when
seeking within the same video media item, the renderer is not disabled.
#minor-release
PiperOrigin-RevId: 533479600
Docs:
* https://developer.android.com/build/publish-library/configure-pub-variants#single-pub-var
* https://developer.android.com/reference/tools/gradle-api/8.0/com/android/build/api/dsl/PublishingOptions
This resolves the following warning from Android Gradle Plugin 7.2.2 and
helps unblock the upgrade to AGP 8.0.1:
> Software Components will not be created automatically for Maven
> publishing from Android Gradle Plugin 8.0. To opt-in to the future
> behavior, set the Gradle property
> `android.disableAutomaticComponentCreation=true` in the
> `gradle.properties` file or use the new publishing DSL.
>
> Affected Modules: `lib-cast`, `lib-common`, `lib-container`,
> `lib-database`, `lib-datasource`, `lib-datasource-cronet`,
> `lib-datasource-okhttp`, `lib-datasource-rtmp`, `lib-decoder`,
> `lib-effect`, `lib-exoplayer`, `lib-exoplayer-all (legacy)`,
> `lib-exoplayer-dash`, `lib-exoplayer-hls`, `lib-exoplayer-ima`,
> `lib-exoplayer-rtsp`, `lib-exoplayer-smoothstreaming`,
> `lib-exoplayer-workmanager`, `lib-extractor`, `lib-media2 (legacy)`,
> `lib-mediasession (legacy)`, `lib-muxer`, `lib-session`,
> `lib-transformer`, `lib-ui`, `lib-ui-leanback`, `test-utils`,
> `test-utils-robolectric`
Issue: androidx/media#409
PiperOrigin-RevId: 533464133
This is a pre-requisite for the Android Studio upgrade assistant to
upgrade from AGP 7.2.2 to 8.0.1, otherwise it fails and complains
this is missing.
Issue: androidx/media#409
PiperOrigin-RevId: 533463246
This is useful for cases where only certain types (e.g. only video)
from a source are needed and other tracks should be filtered out
completely to avoid later track selection issues.
#minor-release
PiperOrigin-RevId: 533394658
Use a non deprecated constructor that includes the option to provide a `channelDescriptionResourceId` parameter.
#minor-release
PiperOrigin-RevId: 532450975
This change adds end-to-end Robolectric playback tests which handle
the scenario the player is playing audio via passthrough and
AudioTrack raises the ERROR_DEAD_OBJECT error upon which the player
attempts to recover by switching to another audio format.
PiperOrigin-RevId: 531180183
Tone-mapping an HDR video with MediaCodec on sm-s908u1 was timing out.
The reason for that is that the decoder was dropping frames, and the
ExternalTextureManager was therefore never propagating the end-of-stream
signal.
There was already a workaround for a similar issue but restricted to
sm-f936b. Removed the model check as the bug is probably present on more
devices.
PiperOrigin-RevId: 530639437
Adding items to an empty playlist is slightly different from adding
items to a non-empty playlist, because the former usually requires to
handle a change in the current item, position and playback state,
while the latter is not expected to affect the current item, position
or state.
The current ExoPlayer and SimpleBasePlayer code doesn't account for
this difference, leading to inconsistent behavior between
setMediaItem(s) and addMediaItem(s) when called on an empty playlist.
PiperOrigin-RevId: 530549928
* Implement RendererCapabilities.Listener in DefaultTrackSelector.
* Add new methods TrackSelector.invalidateForRendererCapabilitiesChange and TrackSelector.InvalidateListener.onRendererCapabilitiesChanged.
* Add new field allowInvalidateSelectionsOnRendererCapabilitiesChange to DefaultTrackSelector.Parameter to allow opt-in of the renderer capabilities detection feature.
* Add logics of triggering track reselection when renderer capabilities change.
PiperOrigin-RevId: 529067433
renderOutputFrame actually renders frames to an output surface. We'll soon have
a releaseOutputFrame method, that would release resources associated with an
output time, so rename this to disambiguate the two methods.
Also rename onOutputFrameAvailable to onOutputFrameAvailableForRendering, to
make it clear this is not available for "release"
This change should be a renaming-only change and have no functional differences.
PiperOrigin-RevId: 527844947
The only dependencies that are not updated are the ones that need
to be kept in sync with other system (like Android source tree) or
would require a Kotlin dependency in common or exoplayer modules.
As a side effect, some demo apps now need a Kotlin config and some
additional modules require desugaring/multidex logic. To simplify
the setup, the desugaring and multidex steps are added to the common
config.
PiperOrigin-RevId: 527243950
`prepare()` now logs a warning if it's called before `setPlayer()`
because it's not possible to tell if it's being called on the wrong
thread (since 3480a27994).
This change finds all the places one is called immediately after the
other and flips the order to be more correct.
Issue: androidx/media#350
#minor-release
PiperOrigin-RevId: 526582294
This simplifies the addition of new fields in the future.
Also do some misc clean up for the volume limit values:
- Add some documentation to mention assumed defaults
- Add the IntRange annotations to match the ones we have in Player
already
- Mention the limits in the relevant Player methods
- Avoid bundling default values
- Improve range checks for masking in MediaController
PiperOrigin-RevId: 526029619
If the limited number of input buffers causes reading of all samples except the last one conveying end of stream, then the last frame will not be rendered.
PiperOrigin-RevId: 525974445
Previously, ExoPlayerImpl had volume flags hardcoded to SHOW_UI, but now the developer can choose what happens on volume change. The old methods have been deprecated.
PiperOrigin-RevId: 523974358
The setter command is only used for setPlaylistMetadata and can
be named COMMAND_SET_PLAYLIST_METADATA. The getter commnad is
used to access getMediaMetadata and getPlaylistMetadata and can
be better named COMMAND_GET_METADATA to reflect this usage.
PiperOrigin-RevId: 523673286
It is not possible to provide a safe deprecation path because
BaseTrackSelection can't easily know which of the methods is
implemented by subclasses.
PiperOrigin-RevId: 523471578
Change what format is logged from MediaCodecAudioRenderer when
AudioSink throws InitializationException. We printed the
AudioSink's format, which most of the times is audio/raw (PCM)
and not the renderer's format. With this change both formats are
logged.
#minor-release
Issue: google/ExoPlayer#11066
PiperOrigin-RevId: 523456840
In addition to the changes in 3a5c4277a7
This change essentially reverts 30e5bc9837 (Merged Jul 2022).
From this CL on, `VideoFrameProcessor` takes in non-offset, monotonically
increasing timestamps. For example, with one 5s and one 10s video,
- `VideoFrameProcessor`'s input should start from 0
- On switching to the second video (10s), the timestamp of the first frame in
the second video should be at 5s.
In ExoPlayer however, `streamOffset` is managed differently and thus needs
correction before sending the frames to `VideoFrameProcessor`:
- The timestamp of the first video is offset by a large int, so the first frame
of the first media item has timestamp (assuming) 10000000000000000
- The last frame of the first media item has 10000005000000000
- At this point the stream off set is updated to 10000005000000000
- The pts of the first frame of the second video starts from 0 again.
PiperOrigin-RevId: 523444236
There is a race with the ad period preparation having completed
and `onDownstreamFormatChanged` being called when a live stream
is joined in an ad period. In this case the stream event metadata
of the period is immediately emitted and causing an ad media period
being created that is selected in `getMediaPeriodForEvent` before
being prepared (1 out of 4).
Using an `isPrepared` flag makes sure we don't hand out the media
period to early in `getMediaPeriodForEvent`.
PiperOrigin-RevId: 522340046
* Add a new event `onAudioCapabilitiesChanged` in `AudioSink.Listener` interface.
* Add an interface `RendererCapabilities.Listener`, which will listen to `onRendererCapabilitiesChanged` events from the renderer.
* Add `getRendererCapabilitiesReceiver` method for `TrackSelector`, and register/unregister the `TrackSelector` as the `RendererCapabilitiesReceiver` (if implemented) when the `ExoPlayer` is initialized/released.
* Trigger the `AudioSink.Listener.onAudioCapabilitiesChanged` and further `RendererCapabilities.Listener.onRendererCapabilitiesChanged` events when the audio capabilities changes are detected in `DefaultAudioSink`.
PiperOrigin-RevId: 521427567
The `DashMediaSource` wrongly added an offset to the media times set
to the `MediaLoadData`. With this the `startTimeMS` and `endTimeMs`
don't represent the positions in the period but in the stream.
`DashMediaSource` was the only call site that was setting the offset
to a non-zero value. So if we are using 0 for the `DashMediaSource`
as well, the offset is redundant and we can remove it everywhere.
PiperOrigin-RevId: 520682026
The media3-hosted versions of these SVGs were removed due to a change in
the way the reference docs are generated. While work on getting them
hosted on developer.android.com, this change simply links to the
(identical) exoplayer2 versions in order to fix the media3 docs.
#minor-release
PiperOrigin-RevId: 520647905
Also fixed the javadoc link in devsite and removed javadoc links from decoder extensions as it is not published yet on developer.android.com.
#minor-release
PiperOrigin-RevId: 520636868
This means we don't need to manually store the result of `get()` into a
local to convince the nullness checker that it remains non-null.
PiperOrigin-RevId: 520576719
For multi-period live streams the content timeline for
which the global ad playback state has been split needs
to be kept together to not run into a race between
timeline refreshes and ad events.
PiperOrigin-RevId: 520358964
`DefaultDrmSession(Manager)` expect most of their methods to be called
on the 'playback thread'. There isn't a playback thread in the case of
`OfflineLicenseHelper`, but in that case it's the thread backing
`DefaultDrmSessionManager.playbackLooper`, which is `OfflineLicenseHelper.handlerThread`.
PiperOrigin-RevId: 520053006
JaCoCo introduces private synthetic methods (even on interfaces) which
have to be skipped when checking that a 'forwarding' implementation does
forward everything. Instead we can use the existing `getPublicMethods()`
method which implicitly skips these (since they're private).
PiperOrigin-RevId: 519665752
When MediaCodecRenderer is given an empty sample stream, it puts
its output format change tracking in a bad state where we never
process future stream changes because we are waiting for a sample
that doesn't exist.
We can fix this by:
- Looping the pending output stream changes to see if we processed
more than one change at once (this fixes the tracking for empty
sample streams that are not the first in the queue).
- Checking if none of the previous streams queued any samples in
onStreamChanged to handle this in the same way as the case
where we already output all samples (this fixes the problem when
the empty sample stream comes first in the queue).
- Also calling onProcessedStreamChange for the case above, which
was missing previously.
#minor-release
PiperOrigin-RevId: 519226637
This wasn't added so far because releasing is always allowed from a
MediaController (as it just releases the connection, not the session
player). But Player instances can be created for other purposes and
the receiver of a Player instance should not always be allowed to
call release if it doesn't own the player resource.
PiperOrigin-RevId: 519121122
The content timeline field may be updated when the live timeline
is refreshed in the looper event preceding the runnable that is
posted to the player thread. Hence a new timeline may contain a
new period uid that is not present in the ad playback state map.
Using a final reference makes sure period and ad playback state
match when asserted.
PiperOrigin-RevId: 518228165
This change makes sure that live ad periods that are played are
skip when attempted to be added to the queue. To make this work
the existing filter logic had to be take into account the content
resume offset that live periods use.
PiperOrigin-RevId: 518068138
* Add `release` method to Renderer and AudioSink interfaces.
* Call the `release` method for renderers when the ExoPlayer is going to be released.
PiperOrigin-RevId: 517135677
While playback thread is 'asleep' during audio offload playback, the playbackInfo.positionUs is not being constantly updated. During this time, the returned value from getCurrentPosition should return an estimate based on the most recent value and playback speed.
PiperOrigin-RevId: 516550509
* Add AudioDeviceCallbackApi23 class which extends the AudioDeviceCallback.
* Add registerAudioDeviceCallback and unregisterAudioDeviceCallback methods for Api23.
* Modify the logics of AudioCapabilitiesReceiver constructor, register and unregister methods.
PiperOrigin-RevId: 516183997
This change makes sure that the `AdPlaybackState` of any period can
contain an empty postroll placeholder.
The placeholder postroll should be represented in the `MediaPeriodId`
of a content period as `nextAdGroupIndex`, but should be ignored when
building the list of `MediaPeriodInfo` in the `MediaPeriodQueue`. This
is required to allow to add an ad group to ad playback state of the
content period that is currently being played, instantly insert an ad
period into the media period queue and immediately transition playback
to the new period.
This change makes sure and tests that
- a live server side inserted postroll placeholder can be inserted to
a `AdPlaybackState` in well-defined and tested way (helper method)
- a postroll placeholder is NOT ignored when
`AdPlaybackState.getAdGroupIndexAfterPositionUs` is called (this
is required when evaluating the `nextAdGroupIndex`).
- a postroll placeholder is ignored when
`AdPlaybackState.getAdGroupIndexForPositionUs` is called (this is
required to not attempt to play the ad and is analogous to ignore the
post roll placeholder in a single period timeline).
- `MediaPeriod.getFollowingMediaPeriodInfo()` does not include a
`MediaPeriodInfo` for the placeholder postroll when building the
queue.
PiperOrigin-RevId: 515079136
We currently rely on the raw playback head position to check if any
data is pending in the AudioTrack (e.g. to know if the renderer is
still ready). We can use the value returned from getCurrentPositionUs
instead to align the "isReady" logic with the playback position logic.
This has the side effect that getPlaybackHeadPosition position is called
less often when the position is obtained via getTimestamp.
PiperOrigin-RevId: 514747613
Once the value returned from AudioTimestampPoller advances, we
only need getPlaybackHeadPosition to sample sync params and
verify the returned timestamp. Both of these happen less often
and we can avoid calling getPlaybackHeadPosition if we don't
actually need it.
PiperOrigin-RevId: 512882170
Playback parameter signalling can be quite complex because
(a) the renderer clock often has a delay before it realizes
that it doesn't support a previously set speed and
(b) the speed set on media clock sometimes intentionally
differs from the one surfaced to the user, e.g. during
live speed adjustment or when overriding ad playback
speed to 1.0f.
This change fixes two problems related to this signalling:
1. When resetting the media clock speed at a period transition,
we don't currently tell the renderers that this happened.
2. When a delayed speed change update from the media clock is
pending and the renderer for this media clock is disabled
before the change can be handled, the pending update becomes
stale but it still applied later and overrides any other valid
speed set in the meantime.
Both edge cases are also covered by extended or new player tests.
Issue: google/ExoPlayer#10882
#minor-release
PiperOrigin-RevId: 512658918
MediaCodecRenderer currently has two independent paths to trigger
events at stream changes:
1. Detection of the last output buffer of the old stream to trigger
onProcessedStreamChange and setting the new output stream offset.
2. Detection of the first input buffer of the new stream to trigger
onOutputFormatChanged.
Both events are identical for most media. However, there are two
problematic cases:
A. (1) happens after (2). This may happen if the declared media
duration is shorter than the actual last sample timestamp.
B. (2) is too late and there are output samples between (1) and (2).
This can happen if the new media outputs samples with a timestamp
less than the first input timestamp.
This can be made more robust by:
- Keeping a separate formatQueue for each stream to avoid case A.
- Force outputting the first format after a stream change to
avoid case B.
Issue: google/ExoPlayer#8594
#minor-release
PiperOrigin-RevId: 512586838
Some devices were reported to have wrong PerformancePoint sets
that cause 60 fps to be marked as unsupported even though they
are supported.
Issue: google/ExoPlayer#10898
#minor-release
PiperOrigin-RevId: 512580395
The output info for a new stream is marked pending until the last
sample of the previous stream has been processed. However, this fails
if the previous stream has already been fully processed. We need to
detect this case explicitly to avoid signalling the output change one
sample too late.
#minor-release
PiperOrigin-RevId: 512572854
This test became flaky after ab7e84fb34 because some of the
unrealistic frame times ended up on the same release time.
Using realistic numbers avoids the flakiness.
PiperOrigin-RevId: 512566469
Protected system broadcasts should not specify the export flag.
Marking them as NOT_EXPORTED breaks sticky broadcasts in some
cases.
Issue: google/ExoPlayer#10970
#minor-release
PiperOrigin-RevId: 512020154
The current logic uses manual array operations to keep track of pending
changes. Modernize this code by using an ArrayDeque and a data class.
This also allows to extend the output stream information in the future.
This also fixes a bug where a position reset accidentally assigns a pending
stream offset instead of keeping the current one.
#minor-release
PiperOrigin-RevId: 511787571
When rendering frames at a rate higher than the screen refresh rate,
e.g. playing at 8x, the player is releasing multiple frames at the same
release time (nanos) which are then dropped by the platform. The output
buffers are available later and as a result MediaCodec cannot keep up
decoding fast enough.
This change skips releasing multiple video frames on the same vsync
period and proactivelly drops the frame. The frame is counted as skipped
rather than dropped to differentiate with frames dropped due to slow
decoding.
PiperOrigin-RevId: 510964976
This call may cause performance overhead in some situations,
for example if the AudioTrack needs to query an offload DSP
for the current position. We don't need to check this multiple
times per doSomeWork iteration as the value is unlikely to
change in any meaningful way.
PiperOrigin-RevId: 510957116
Rename ScaleToFitTransformation to ScaleAndRotateTransformation.
This better represents the operations that can be accomplished using this
effect. The name was originally named ScaleToFit* because it's not obvious how
to scale to fit using OpenGL, and this effect handled the scaling to fit in a way that no other MatrixTransformations did.
However, it's hard to discover how to rotate when skimming names of effects, so
it's probably more useful to convey that this effect rotates, than that it
scales to fit.
PiperOrigin-RevId: 510480078
Previously, any constructors instrumented by Robolectric were made public. This
caused two types of issues:
1) If Android classes had non-public constructors which were made public and
added to the Android API, Robolectric allowed tests to incorrectly use the
constructors on older SDK levels (where they were non-public). This most
commonly occurs for AccessibiltyEvent and AccessibilityNodeInfo.
2) When reflection was used to instantiate classes that were instrumented by
Robolectric, all constructors were accessible, which did not match what
happened when running on an Android test.
Update the instrumentation in Robolectric to prevent making all public
constructors.
PiperOrigin-RevId: 510049123
Tests in `SilenceSkippingAudioProcessorTest` used half as many short integers as needed for channel values when generating alternating silence/noise input. Fix this by passing left and right channel input.
PiperOrigin-RevId: 509188074
The AsynchronousMediaCodecAdapter's queuing thread stores any exceptions
raised by MediaCodec and re-throws them on the next call to
queueInputBuffer()/queueSecureInputBuffer(). However, if MediaCodec
raises and error while queueing, it goes into a failed state and does
not announce available input buffers. If there is no input available
input buffer, the MediaCodecRenderer will never call
queueInputBuffer()/queueSecureInputBuffer(), hence playback is stalled.
This change surfaces the queueing error through the adapter's dequeueing
methods.
PiperOrigin-RevId: 508637346
`TrackSelectorResult.rendererConfigurations` can contain null elements:
> A null entry indicates the corresponding renderer should be disabled.
This wasn't caught by the nullness checker because `ExoPlayerImpl` is
currently excluded from analysis.
#minor-release
Issue: google/ExoPlayer#10977
PiperOrigin-RevId: 508619169
Previously, Robolectric's instrumentation updated all constructors to be
public. This caused two main types of problems:
1) When non-public constructors were made public and added to the Android API,
Robolectric allowed tests to incorrectly use the constructors on older SDK
levels (where they were non-public). This most commonly occurs for
AccessibiltyEvent and AccessibilityNodeInfo.
2) When reflection was used to instantiate classes that were instrumented by
Robolectric, all constructors were accessible.
Fix issues across Google3 Robolectric tests that were affected by this issue.
A forthcoming change will fix the instrumentation in Robolectric to prevent
this type of issue from occurring.
Tested:
TAP --sample ran all affected tests and none failed
http://test/OCL:507861075:BASE:507805409:1675803313108:f2128fa4
PiperOrigin-RevId: 508087822
If a renderer error happens while processing readahead data for the
next item in the playlist, we currently throw the error immediately
and only set the item id in the error details. This makes it harder
to associate the error to the right item. For example, the user
facing UI is likely not updated to show the failing item when the
error is reported.
This can be improved slighly by force setting the position to the
failing item. The playback still fails immediately, but this can't
be avoided because the renderer itself went into an error state.
PiperOrigin-RevId: 507808635
The AudioTrackPositionTracker needs to correct positions by
the speed set on the AudioTrack itself whenever it makes
estimations based on real-time (=the real-time playout
duration is not equal to the media duration played).
This happens for the main playback path already, but not for
the mode in which the position is estimated from the playback
head position and also not in the phase after the track has
been stopped. Both cases are not very noticeable during
normal playback, but become relevant when playing in offload
mode.
PiperOrigin-RevId: 507736408
Based on [this conversation thread](https://chat.google.com/room/AAAA--f88ao/76Rem_cRCK8), I've opted to update the existing FrameProcessor.create() rather than deprecate it, as it is unlikely to be in use by apps outside google3.
PiperOrigin-RevId: 506920930
Before this CL, the `renderedLastFrame` flag is not set if the last frame is released immediately (force render), or when it's dropped.
PiperOrigin-RevId: 506358626
Flushing resets all the texture processors within the `FrameProcessor`. This
includes:
- At the back, the FinalMatrixTextureProcessorWrapper, and its MatrixTextureProcessor
- At the front, the ExternalTextureManager
- All the texture processors in between
- All the ChainingGlTextureProcessorListeners in between texture processors
- All the internal states in the aforementioned components
The flush process follows the order, from `GlEffectsFrameProcessor.flush()`
1. Flush the `FrameProcessingTaskExecutor`, so that after it returns, all tasks queued before calling `flush()` completes
2. Post to `FrameProcessingTaskExecutor`, to flush the `FinalMatrixTextureProcessorWrapper`
3. Flushing the `FinalMatrixTextureProcessorWrapper` will propagate flushing through, via the `ChainingGlTextureProcessorListener`
Startblock:
has LGTM from christosts
and then
add reviewer andrewlewis
PiperOrigin-RevId: 506296469
Can be used to combine multiple media items into a single timeline window.
Issue: androidx/media#247
Issue: google/ExoPlayer#4868
PiperOrigin-RevId: 506283307
