Android considers ALAC initialization data to consider of the magic
cookie only, where-as FFmpeg requires a full atom. Standardize around
the Android definition, since it makes more sense (the magic cookie
being contained within an atom is container specific, where-as the
decoder shouldn't care what container the media stream is carried in)
Issue: #5938
PiperOrigin-RevId: 261124155
Checking inputPosition == 0 isn't sufficient because the synchronization
at the top of read() may advance the input (i.e. in the case where there's
some garbage prior to the seek frame).
PiperOrigin-RevId: 261086901
When using speed adjustment it was possible for playback to get stuck at a
period transition when the channel count changed: SonicAudioProcessor would be
drained at the point of the period transition in preparation for creating a new
AudioTrack with the new channel count, but during draining the incorrect (new)
channel count was used to calculate the output buffer size for pending data from
Sonic. This meant that, for example, if the channel count changed from stereo to
mono we could have an output buffer size that stored an non-integer number of
audio frames, and in turn this would cause writing to the AudioTrack to get
stuck as the AudioTrack would prevent writing a partial audio frame.
Use Sonic's current channel count when draining output to fix the issue.
PiperOrigin-RevId: 260156541
1. Using the Locale on API<21 doesn't make any sense because it's a no-op
anyway. Slightly restructured the code to avoid that.
2. API<21 often reports languages with non-standard underscores instead of
dashes. Normalize that too.
3. Some invalid language tags on API>21 get normalized to "und". Use original
tag in such a case.
Issue:#6153
PiperOrigin-RevId: 258773463
2-letter codes (ISO 639-1) are the standard Android normalization and thus we
should prefer them to 3-letter codes (although both are technically allowed
according the BCP47).
This helps in two ways:
1. It simplifies app interaction with our normalized language codes as the
Locale class makes it easy to convert a 2-letter to a 3-letter code but
not the other way round.
2. It better normalizes codes on API<21 where we previously had issues with
language+country codes (see tests).
3. It allows us to normalize both ISO 639-2/T and ISO 639-2/B codes to the same
language.
PiperOrigin-RevId: 258729728
If we use the default start position, we currently resolve it immediately
even if we need to play an ad first, and later try to project forward again
if we believe that the default start position should be used.
This causes problems if a specific start position is set and the later
projection after the preroll ad shouldn't take place.
The problem is solved by keeping the content position as TIME_UNSET (= default
position) if an ad needs to be played first. The content after the ad can
then be resolved to its current default position if needed.
PiperOrigin-RevId: 258583948
Sending MESSAGE_PREPARE_SOURCE should happen last in the constructor.
It was previously happening before initialization finished (and in
particular before pendingMediaPeriods was instantiated).
Issue: #6146
PiperOrigin-RevId: 257158275
Currently, we sometimes apply new playback parameters directly and sometimes
through the list of playbackParameterCheckpoints. Only when using the checkpoints,
we also reset the offset and corresponding position for speedup position
calculation. However, these offsets need to be changed in all cases to prevent
calculation errors during speedup calculation[1].
This change channels all playback parameters changes through the checkpoints to
ensure the offsets get updated accordingly. This fixes an issue introduced in
31911ca54a.
[1] - The speed up is calculated using the ratio of input and output bytes in
SonicAudioProcessor.scaleDurationForSpeedUp. Whenever we set new playback
parameters to the audio processor these two counts are reset. If we don't reset
the offsets too, the scaled timestamp can be a large value compared to the input
and output bytes causing massive inaccuracies (like the +20 seconds in the
linked issue).
Issue:#6117
PiperOrigin-RevId: 256533780
Before this change we'd release the audio track and create a new one as soon
as audio processors had drained when reconfiguring.
Fix this behavior by stop()ing the AudioTrack to play out all written data.
Issue: #2446
PiperOrigin-RevId: 244812402
We currently handle most the control code logic after handling special
characters. This includes filtering out repeated control codes and checking
for the correct channel. As the special character sets are control codes as well,
these checks should happen before parsing the characters.
Issue:#6133
PiperOrigin-RevId: 256993672
1. Only output video starting from a keyframe
2. When calculating the timestamp offset to adjust live streams to start
at t=0, use the timestamp of the first tag from which a sample is actually
output, rather than just the first audio/video tag. The test streams in
the referenced GitHub issue start with a video tag whose packet type is
AVC_PACKET_TYPE_SEQUENCE_HEADER (i.e. does not contain a sample) and whose
timestamp is set to 0 (i.e. isn't set). The timestamp is set correctly on
tags that from which a sample is actually output.
Issue: #6111
PiperOrigin-RevId: 256147747
We currently don't display the last frame because the seek time is behind the
last frame's timestamps and it's thus marked as decodeOnly.
This case can be detected by checking whether all data sent to the codec is
marked as decodeOnly at the time we read the end of stream signal. If so, we
can re-enable the last frame. This should work for almost all cases because the
end-of-stream signal is read in the same feedInputBuffer loop as the last
frame and we therefore haven't released the last frame buffer yet.
Issue:#2568
PiperOrigin-RevId: 251425870
We are currently queuing periods in a way such that the new start position
lines up with the end of the previous period (to ensure continuous playback).
However, if the start position of the new period is larger than the total of
all previously played period durations, we may end up with negative renderer
timestamps when seeking back to the beginning of this new period. Negative
timestamps should be avoided as most decoders have problems handling them
correctly.
This change forces a renderer reset if we detect such a seek to a negative
renderer time and also resets the renderer offset to 0 every time all
renderers are disabled, as this is the only time where we can savely change
the offset of an existing media period.
Also, if playback starts with an ad, we choose the content position as
renderer offset to prevent the whole issue from occurring for the seek-behind-
midroll case.
Issue:#6009
Issue:#5323
PiperOrigin-RevId: 253790054
In some edge cases the renderer position may be slightly ahead of the
buffered position and the total buffered duration is thus negative. We already
filter that in ExoPlayerImpl for the publicly accessible value. However, we
forward the unfiltered value to other components like the LoadControl, which
may be confusing.
Issue:#6015
PiperOrigin-RevId: 253780460
This permission has normal access right and can't be revoked by the user.
However, an app can choose to revoke it when using ExoPlayer, e.g. if
no network is required and the app doesn't want to list this permission.
Support this use case by gracefully catching the exception in the relevant
places.
Issue:#6019
PiperOrigin-RevId: 253759332
It's only thrown in an edge case on API level 20 and below. If it
is thrown it causes playback failure when playback could succeed,
by throwing up through configureCodec.
It seems better just to catch the exception and have the codec be
configured using the format's own width and height.
PiperOrigin-RevId: 251745539
cache() opens all connections with unset length to avoid position errors.
This makes more data then needed to be downloading by the underlying
network stack.
This fix makes makes it open connections for only required length.
Issue:#5927
PiperOrigin-RevId: 250546175
We currently toggle the view in onTouchEvent ACTION_DOWN which is non-standard
and causes problems when used in a ViewGroup intercepting touch events.
Switch to standard Android click handling instead which is also what most
other player apps are doing.
Issue:#5784
PiperOrigin-RevId: 245219728
Using parallel adaptation for Formats without bitrate information currently
causes an exception. Handle this gracefully and also cases where all formats
have the same bitrate.
Issue:#5971
PiperOrigin-RevId: 250682127
According to Cue's constructor (for bitmaps) documentation:
+ cuePositionAnchor does horizontal anchoring.
+ cueLineAnchor does vertical anchoring.
Usage is currently inverted.
Issue:#5633
PiperOrigin-RevId: 250253002
This prevents further unexpected updates if the MediaSource happens to
finish its preparation at a later point.
Issue:#5915
PiperOrigin-RevId: 249439246
The SurfaceListener just sets the surface on the VideoComponent, but
SphericalSurfaceView already accesses the VideoComponent directly so it seems
simpler to update the surface directly.
PiperOrigin-RevId: 249242185
If a PlayerMessage throws an exception, it is currently not deleted from the
list of pending messages. This may be problematic as the list of pending
messages is kept when the player is retried without reset and the message is
sent again in such a case.
PiperOrigin-RevId: 247414494
Adding an explicit option to clear all downloads prevents repeated database
access in a loop when trying to delete all downloads.
However, we still create an arbitrary number of parallel Task threads for this
and seperate callbacks for each download.
PiperOrigin-RevId: 247234181
As justification for why we should not have this type of logging,
it would scale up to about 13K LOC, 1800 Strings, and 36K (after
pro-guarding - in the case of the demo app) if we did it through
the whole code base*. It makes the code messier to read, and in
most cases doesn't add significant value.
Note: I left the Scheduler logging because it logs interactions
with some awkward library components outside of ExoPlayer, so is
perhaps a bit more justified.
* This is a bit unfair since realistically we wouldn't ever add
lots of logging into trivial classes. But I think it is fair
to say that the deltas would be non-negligible.
PiperOrigin-RevId: 246181421
- Removed DownloadInternal and its sometimes-out-of-sync
duplicate state
- Fixed downloads being in STOPPED rather than QUEUED state
when the manager is paused
- Fixed setMaxParallelDownloads to start/stop downloads if
necessary when the value changes
- Fixed isWaitingForRequirements
PiperOrigin-RevId: 246164845
Can happen if the load position falls behind in every playlist and
when we try to load the next segment, the adaptive selection logic
decides to change variant.
Issue:#5816
PiperOrigin-RevId: 245923006
This resolves some naming confusion that previously existed
as a result of DownloadThread also being used for removals.
Some related variables (e.g. activeDownloadCount) would refer
to both download and removal tasks, whilst others
(e.g. maxParallelDownloads) would refer only to downloads.
This change renames those that refer to both to use "task"
terminology.
This change also includes minor test edits.
PiperOrigin-RevId: 245913671
Experiments show this is beneficial for rebuffers with only minor impact
on battery usage.
Configurations which explicitly set a minimum buffer duration are unaffected.
Issue:#2083
PiperOrigin-RevId: 244823642
There are no logic changes here. It's just moving code around and removing
the "internal" part of names where no longer required.
PiperOrigin-RevId: 245407238
This ensures we keep the loading period in sync with the the playing period in
PlybackInfo, when the latter changes to something new.
PiperOrigin-RevId: 244838123
- We had buildAddRequest and sendNewDownload. Converged to
buildAddDownload and sendAddDownload.
- Also fixed a few more inconsistencies, and brought the
action constants into line as well.
PiperOrigin-RevId: 244274041
- Listener based reporting of progress allows the content length
to be persisted into the download index (and notified via a
download state change) as soon as it's available.
- Moved contentLength back into Download proper. It should only
ever change once, so I'm not sure it belongs in the mutable part
of Download.
- Made a DownloadProgress class, for naming sanity.
PiperOrigin-RevId: 244242487
1. customCacheKey for DASH/HLS/SS is now asserted against
in DownloadRequest
2. Merging of event delivery in DownloadManager is very
tricky to get right and probably not a good idea
PiperOrigin-RevId: 244048392
Currently SimpleCache will touch cache spans whenever it reads
from them. With legacy SimpleCache setups this involves a potentially
expensive file rename. With new SimpleCache setups it involves
a more efficient but still non-free database write.
For offline use cases, and more generally any use case where the
eviction policy doesn't use last access timestamps, touching is
not useful. This change allows the evictor to specify whether it
needs cache spans to be touched or not. SimpleCache will only touch
spans if the evictor requires it.
Note: There is a potential change in behavior in cases where a
cache uses an evictor that doesn't need cache spans to be touched,
but then later switches to an evictor that does. The new evictor
may temporarily make sub-optimal eviction decisions as a result.
I think this is a very fair trade-off, since this scenario is
unlikely to occur much, if at all, in practice, and even if it
does occur the result isn't that bad.
PiperOrigin-RevId: 244005682
One goal we forgot about a little bit was to allow applications
to provide their own index implementation. This requires the
writable side to also be defined by an interface.
PiperOrigin-RevId: 243979660
ImaAdsLoader gets the player position after the app releases
the player to support resuming ads at their current position
if the same ads loader is reused.
PiperOrigin-RevId: 243969916
The removed condition only applies when prepare fails and no timeline was or
is known. We should keep a pending seek position in such a case. The internal
player does the same thing already.
PiperOrigin-RevId: 243819466
- Expose constructors that take DatabaseProvider. Deprecate those
that do not.
- Expose Cache.getUid. This will likely be used for naming of the
tables accessed by DefaultDownloadIndex .
PiperOrigin-RevId: 243637786
- Allows enforcing immutability, which in a future CL will allow
avoiding allocating a new array/list on every call.
- Also some left over doc cleanup from the DownloadState rename.
PiperOrigin-RevId: 243627352
