`findDecoder/EncoderForFormat` seem to be more restrictive than querying
`MediaCodecList` as done for playback, and it's not clear that the cases where
no codec is found correspond to actual cases that would fail given that it
seems this returns an empty string for many cases in production.
Switch to using `MediaCodecUtil` and `EncoderUtil` for querying codecs instead.
PiperOrigin-RevId: 525078321
The sessions may have different application threads for their players,
and the service with its notification provider runs on the main thread.
To ensure everything runs on the correct thread, this change labels
methods where needed and fixes thread access in some places.
Issue: androidx/media#318
PiperOrigin-RevId: 524849598
This check was a leftover from when the metadata was generated from
the MediaItem only. Since we moved to the actual MediaMetadata fields,
the check is completely unnecessary and prevents accessing metadata
when the GET_CURRENT_MEDIA_ITEM command is not available.
#minor-release
PiperOrigin-RevId: 524837587
In `ExternalTextureManager` in seemingly rare cases end of stream is signaled
at the point where a frame is currently pending processing. In that case the
video end of stream signal was lost. If the muxer timeout was enabled this
case would result in throwing an exception, but otherwise the operation would
get stuck
Add code to signal end of stream in `onInputFrameProcessed` as well, so that we
signal end of stream when the pending frame is handled.
Tested by running
`TransformerEndToEndTest.loopingTranscodedVideo_producesExpectedResult` several
times.
PiperOrigin-RevId: 524361069
The overrides specified by a MediaController may not use the exact
same TrackGroup instances as known to the Player because the groups
have been bundled to and from the controller. This bundling may
alter the instance slightly depending on the version used on each
side of the communication and the fields set (e.g. Format.metadata
is not supported for bundling).
This issue can be solved by creating unique track group ids for
each group on the session side before bundling. On the way back,
the groups in the track selection parameters can be mapped backed
to their original instances based on this id.
#minor-release
Issue: androidx/media#296
PiperOrigin-RevId: 523986626
Previously, ExoPlayerImpl had volume flags hardcoded to SHOW_UI, but now the developer can choose what happens on volume change. The old methods have been deprecated.
PiperOrigin-RevId: 523974358
The setter command is only used for setPlaylistMetadata and can
be named COMMAND_SET_PLAYLIST_METADATA. The getter commnad is
used to access getMediaMetadata and getPlaylistMetadata and can
be better named COMMAND_GET_METADATA to reflect this usage.
PiperOrigin-RevId: 523673286
Previously `ChannelMixingAudioProcessor` output float because it was
implemented using the audio mixer's float mixing support.
Move the implementation over to just using the `ChannelMixingMatrix` and make
it publicly visible in the common module so it can be used by apps for both
playback and export.
Also resolve a TODO that no longer had a bug attached by implementing support
for putting multiple mixing matrices to handle different input audio channel
counts, and fix some nits in the test code.
Tested via unit tests and manually configuring a `ChannelMixingAudioProcessor`
in the transformer demo app and playing an audio stream that identifies
channels, and verifying that they are remapped as expected.
PiperOrigin-RevId: 523653901
It is not possible to provide a safe deprecation path because
BaseTrackSelection can't easily know which of the methods is
implemented by subclasses.
PiperOrigin-RevId: 523471578
`sed` has a different in-place command line syntax in FreeBsd
than GNU tools. This change makes the `sed` commands work with
FreeBSD `sed` on OSX in bash and zsh shells.
Issue: androidx/media#217
PiperOrigin-RevId: 522043938
MediaItems are not meant to be unique in a playlist. If a legacy
session publishes multiple items that get converted to equal MediaItems,
the current code fails because we look up queue ids in a Map (that
doesn't allow duplicate entries).
Fix this by storing a simple list of items with additional data.
#minor-release
Issue: androidx/media#290
PiperOrigin-RevId: 521993802
* Add a new event `onAudioCapabilitiesChanged` in `AudioSink.Listener` interface.
* Add an interface `RendererCapabilities.Listener`, which will listen to `onRendererCapabilitiesChanged` events from the renderer.
* Add `getRendererCapabilitiesReceiver` method for `TrackSelector`, and register/unregister the `TrackSelector` as the `RendererCapabilitiesReceiver` (if implemented) when the `ExoPlayer` is initialized/released.
* Trigger the `AudioSink.Listener.onAudioCapabilitiesChanged` and further `RendererCapabilities.Listener.onRendererCapabilitiesChanged` events when the audio capabilities changes are detected in `DefaultAudioSink`.
PiperOrigin-RevId: 521427567
The `DashMediaSource` wrongly added an offset to the media times set
to the `MediaLoadData`. With this the `startTimeMS` and `endTimeMs`
don't represent the positions in the period but in the stream.
`DashMediaSource` was the only call site that was setting the offset
to a non-zero value. So if we are using 0 for the `DashMediaSource`
as well, the offset is redundant and we can remove it everywhere.
PiperOrigin-RevId: 520682026
For multi-period live streams the content timeline for
which the global ad playback state has been split needs
to be kept together to not run into a race between
timeline refreshes and ad events.
PiperOrigin-RevId: 520358964
If RTSP Setup Request with UDP receives HTTP Error Status 461 UnsupportedTransport, then client will retry with TCP.
Issue: google/ExoPlayer#11069
PiperOrigin-RevId: 518807829
* Add `release` method to Renderer and AudioSink interfaces.
* Call the `release` method for renderers when the ExoPlayer is going to be released.
PiperOrigin-RevId: 517135677
While playback thread is 'asleep' during audio offload playback, the playbackInfo.positionUs is not being constantly updated. During this time, the returned value from getCurrentPosition should return an estimate based on the most recent value and playback speed.
PiperOrigin-RevId: 516550509
The value returned by `player.getContentPosition()` is calculated
in the timeline based on the position of the first period in the
window. In a single period live stream this position is advanced
when the live window advances on timeline refresh.
This calculation has produced slightly varying values below 1000
us which are likely caused by us/ms truncations for public API
values that we use in the IMASSAIMediaSource.
However, `AdGroup.timeUs` is the (recorded) content position at the
moment when the first ad of the an ad group has been inserted. While
playing an ad, we can always use this value instead of
`getContentPosition()` to not require recalculation.
#minor-release
PiperOrigin-RevId: 515093177
Segment timelines are technically allowed to be empty, but not all places
add the necessary checks.
Issue: google/ExoPlayer#11014
PiperOrigin-RevId: 514722205
Playback parameter signalling can be quite complex because
(a) the renderer clock often has a delay before it realizes
that it doesn't support a previously set speed and
(b) the speed set on media clock sometimes intentionally
differs from the one surfaced to the user, e.g. during
live speed adjustment or when overriding ad playback
speed to 1.0f.
This change fixes two problems related to this signalling:
1. When resetting the media clock speed at a period transition,
we don't currently tell the renderers that this happened.
2. When a delayed speed change update from the media clock is
pending and the renderer for this media clock is disabled
before the change can be handled, the pending update becomes
stale but it still applied later and overrides any other valid
speed set in the meantime.
Both edge cases are also covered by extended or new player tests.
Issue: google/ExoPlayer#10882
#minor-release
PiperOrigin-RevId: 512658918
MediaCodecRenderer currently has two independent paths to trigger
events at stream changes:
1. Detection of the last output buffer of the old stream to trigger
onProcessedStreamChange and setting the new output stream offset.
2. Detection of the first input buffer of the new stream to trigger
onOutputFormatChanged.
Both events are identical for most media. However, there are two
problematic cases:
A. (1) happens after (2). This may happen if the declared media
duration is shorter than the actual last sample timestamp.
B. (2) is too late and there are output samples between (1) and (2).
This can happen if the new media outputs samples with a timestamp
less than the first input timestamp.
This can be made more robust by:
- Keeping a separate formatQueue for each stream to avoid case A.
- Force outputting the first format after a stream change to
avoid case B.
Issue: google/ExoPlayer#8594
#minor-release
PiperOrigin-RevId: 512586838
Some devices were reported to have wrong PerformancePoint sets
that cause 60 fps to be marked as unsupported even though they
are supported.
Issue: google/ExoPlayer#10898
#minor-release
PiperOrigin-RevId: 512580395
Protected system broadcasts should not specify the export flag.
Marking them as NOT_EXPORTED breaks sticky broadcasts in some
cases.
Issue: google/ExoPlayer#10970
#minor-release
PiperOrigin-RevId: 512020154
In parsing Describe RTSP response messages, IllegalArgumentExceptions are thrown for invalid parameters and values. These exceptions were not caught and crashed the Playback thread. Now these exceptions will be caught and their errors forwarded to the proper error handling listeners.
#minor-release
Issue: google/ExoPlayer#10971
PiperOrigin-RevId: 509207881
