Player controls are somewhat distracting when showing the difference between the
input and output video, as they obscure and darken the video players.
PiperOrigin-RevId: 480597804
(cherry picked from commit 51edb329a1)
Player controls are somewhat distracting when showing the difference between the
input and output video, as they obscure and darken the video players.
PiperOrigin-RevId: 480597804
(cherry picked from commit 91a61cecbe)
Before, slider values were read as `floor()`'ed `longValue()`s, so that trimming to
intervals less than one second would be interpreted as a request for a zero-
duration trim.
Also, rename `radiusRange` references here to `trimRange`, since this is not a
radius range.
PiperOrigin-RevId: 480401556
(cherry picked from commit fb5cd18dcd)
Before, slider values were read as `floor()`'ed `longValue()`s, so that trimming to
intervals less than one second would be interpreted as a request for a zero-
duration trim.
Also, rename `radiusRange` references here to `trimRange`, since this is not a
radius range.
PiperOrigin-RevId: 480401556
(cherry picked from commit 6c59f9ece4)
We currently use the literal -1 (=NO_VALUE) when adding up the
total. Tracks without known bitrate can be ignored in the
calculation, but we should use an explicit value of 0.
#minor-release
Issue: google/ExoPlayer#10664
PiperOrigin-RevId: 480048126
(cherry picked from commit af19e0ea89)
We currently use the literal -1 (=NO_VALUE) when adding up the
total. Tracks without known bitrate can be ignored in the
calculation, but we should use an explicit value of 0.
#minor-release
Issue: google/ExoPlayer#10664
PiperOrigin-RevId: 480048126
(cherry picked from commit b0daae72cf)
If the sample type is Dolby Vision and the display does not support Dolby Vision, then the capabilities DecoderSupport flag is set to DECODER_SUPPORT_FALLBACK_MIMETYPE. This denotes that the renderer will use a decoder for a fallback mimetype if possible. This alters track selection as tracks with DecoderSupport DECODER_SUPPORT_PRIMARY are preferred.
UnitTests included
-DefaultTrackSelector test that checks track selection reordering with DECODER_SUPPORT_FALLBACK_MIMETYPE
-MediaCodecVideoRenderer test that checks setting of DecoderSupport flag based on Display's Dolby Vision support
Issue: google/ExoPlayer#8944
PiperOrigin-RevId: 480040876
(cherry picked from commit a366590a04)
If the sample type is Dolby Vision and the display does not support Dolby Vision, then the capabilities DecoderSupport flag is set to DECODER_SUPPORT_FALLBACK_MIMETYPE. This denotes that the renderer will use a decoder for a fallback mimetype if possible. This alters track selection as tracks with DecoderSupport DECODER_SUPPORT_PRIMARY are preferred.
UnitTests included
-DefaultTrackSelector test that checks track selection reordering with DECODER_SUPPORT_FALLBACK_MIMETYPE
-MediaCodecVideoRenderer test that checks setting of DecoderSupport flag based on Display's Dolby Vision support
Issue: google/ExoPlayer#8944
PiperOrigin-RevId: 480040876
(cherry picked from commit 266de1b21b)
Replace the instance-field MediaController with a local instance created
in each test.
PiperOrigin-RevId: 480039768
(cherry picked from commit ba1ecafb8f)
PlayableFolderActivity currently uses two seperate commands
to set the playlist and then seek to the requested item.
This is slightly inefficient and also causes analytics
listeners to believe the first item in the playlist was
briefly active.
#minor-release
Issue: androidx/media#180
PiperOrigin-RevId: 480031682
(cherry picked from commit 5d6d069e4e)
Currently, a frame is dropped if it's requested release time is in the past.
This mode was added to support previewing. However, in normal ExoPlayer
playback, slightly late frames (<30ms late) are also rendered. On MediaCodec
side, this means calling `releaseOutputBuffer` with a release time in the
past.
PiperOrigin-RevId: 479615291
(cherry picked from commit 2188685c46)
Currently, a frame is dropped if it's requested release time is in the past.
This mode was added to support previewing. However, in normal ExoPlayer
playback, slightly late frames (<30ms late) are also rendered. On MediaCodec
side, this means calling `releaseOutputBuffer` with a release time in the
past.
PiperOrigin-RevId: 479615291
(cherry picked from commit a426cb27c0)
Remove static imports to constants and imports to intdefs, to make the
code more readable.
PiperOrigin-RevId: 479594144
(cherry picked from commit 36e12fbadb)
Also, update tests to allow AnyOf error codes, and no longer check exception messages, which caused quite a bit of churn.
PiperOrigin-RevId: 479570861
(cherry picked from commit faa796d736)
Also, update tests to allow AnyOf error codes, and no longer check exception messages, which caused quite a bit of churn.
PiperOrigin-RevId: 479570861
(cherry picked from commit 8548e3519e)
This mode is supported by using `C.TIME_UNSET` (which is a negative value). The
new logic decouples the value of `C.TIME_UNSET` and the frame dropping
behaviour.
PiperOrigin-RevId: 479368880
(cherry picked from commit ccab9fba03)
This mode is supported by using `C.TIME_UNSET` (which is a negative value). The
new logic decouples the value of `C.TIME_UNSET` and the frame dropping
behaviour.
PiperOrigin-RevId: 479368880
(cherry picked from commit 26be9ae885)
* Add `setOutputStreamOffsetUs(long)` method in `AudioSink`.
* Add private methods `setOutputStreamOffsetUs(long)` method in `MediaCodecRenderer` and `DecoderAudioRenderer`.
* Add protected method `onOutputStreamOffsetUs(long)` method in `MediaCodecRenderer`, in which:
* `MediaCodecRenderer` itself will be no-op for this method.
* `MediaCodecAudioRenderer` will propagate this value to its `audioSink`.
* Add logics in `DecoderAudioRenderer` to calculate `outputStreamOffsetUs`.
PiperOrigin-RevId: 479265429
(cherry picked from commit 4c73241058)
* Add `setOutputStreamOffsetUs(long)` method in `AudioSink`.
* Add private methods `setOutputStreamOffsetUs(long)` method in `MediaCodecRenderer` and `DecoderAudioRenderer`.
* Add protected method `onOutputStreamOffsetUs(long)` method in `MediaCodecRenderer`, in which:
* `MediaCodecRenderer` itself will be no-op for this method.
* `MediaCodecAudioRenderer` will propagate this value to its `audioSink`.
* Add logics in `DecoderAudioRenderer` to calculate `outputStreamOffsetUs`.
PiperOrigin-RevId: 479265429
(cherry picked from commit 5bff862374)
The JavaDoc of RequestMetadata should point to the media3 controller,
not the platform one.
PiperOrigin-RevId: 479047924
(cherry picked from commit 0889589947)
The JavaDoc of RequestMetadata should point to the media3 controller,
not the platform one.
PiperOrigin-RevId: 479047924
(cherry picked from commit b70258e43d)
Currently `FrameProcessor.releaseOutputFrame()` method supports
Release at a specific system time
Drops the frame
This API is not that convenient to use when the caller wants to release a frame, now, regardless of the release time. A use case is to release (present) a frame when no frame is shown for a while, and it's thus better to just release the frame, now.
Currently if MCVR wants a frame to be rendered now, MCVR calls release frame with a set offset like 10us: `releaseOutputFrame(System.nanoTime() + 10_000)`. The 10us offset is to prevent the frame processor dropping the frame, due to thread hopping delays.
To make the API better usable, consider adding a mode for releasing the frame now, like (bold marks the new mode)
- Use C.TIME_UNSET to drop
- **Use -1 to release the frame immediately, or**
- Use an actual release time.
PiperOrigin-RevId: 479044215
(cherry picked from commit ff8dd0b4b9)
Currently `FrameProcessor.releaseOutputFrame()` method supports
Release at a specific system time
Drops the frame
This API is not that convenient to use when the caller wants to release a frame, now, regardless of the release time. A use case is to release (present) a frame when no frame is shown for a while, and it's thus better to just release the frame, now.
Currently if MCVR wants a frame to be rendered now, MCVR calls release frame with a set offset like 10us: `releaseOutputFrame(System.nanoTime() + 10_000)`. The 10us offset is to prevent the frame processor dropping the frame, due to thread hopping delays.
To make the API better usable, consider adding a mode for releasing the frame now, like (bold marks the new mode)
- Use C.TIME_UNSET to drop
- **Use -1 to release the frame immediately, or**
- Use an actual release time.
PiperOrigin-RevId: 479044215
(cherry picked from commit 139a6e8d31)
Assert that tone mapping is applied when an HDR edit cannot be HDR, but is successfully tone mapped. Meanwhile, assert that fallback, which is applied after codec configuration (which throws the "Tone-mapping requested but not supported by the decoder" error) is not applied when that error is called.
PiperOrigin-RevId: 478762951
(cherry picked from commit 36e41059ea)
Assert that tone mapping is applied when an HDR edit cannot be HDR, but is successfully tone mapped. Meanwhile, assert that fallback, which is applied after codec configuration (which throws the "Tone-mapping requested but not supported by the decoder" error) is not applied when that error is called.
PiperOrigin-RevId: 478762951
(cherry picked from commit 253486d4af)
When a media service currently produces multiple media sessions, the notification of the second session overwrites the notification of the first one, because all sessions use the same notification ID. When we use different notification IDs for different sessions, multiple media notifications can be up at the same time, which means that they can both be controlled at the same time.
PiperOrigin-RevId: 478709069
(cherry picked from commit 7783c6e4f7)
"Final" was likely added to reference the FinalMatrixTextureProcessorWrapper,
which is a package-private class. However, I think more clear to express that
this is the input size, which then has all effects applied, to get the output
size.
PiperOrigin-RevId: 477975358
Rename test files to avoid substrings that can be implied by the directory name,
like "Transformation" and "Test"
No functional changes. Renaming-only.
PiperOrigin-RevId: 477724724
