Some devices fail to decode an avc3 stream that doesn't start with an SPS (for
example, if an access unit delimiter appears first). Workaround the issue by
discarding input sample data up to the first SPS on those devices.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=117224602
The upstream source (or its stream) should always provide data
starting from a sync frame, so this logic shouldn't be necessary.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=117220759
The logic in the platform was causing captions and the reported
playback position to gradually drift out of sync with respect to
audio and video.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=117126970
The TrackSelector API will look like:
TrackSelection[] selectTrack(
TrackRenderer[] renderers, TrackGroup[] trackGroups);
In this CL:
- SampleSources return TrackGroup[], so that the result can be easily
passed to the selector.
- TrackStream gets its own file to sit alongside other Track* classes.
- A TrackSelection object is introduced to encapsulate group and track
indices.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=115251331
- Add a top level failure type (source/renderer/unexpected),
and convenience methods for retrieving the underlying cause
without needing to cast.
- Also add renderer index in the case of renderer failures.
- setIndex/getIndex is a little . . . unclean, but alternatives
involve either having the top line of the stack trace be a
non-interesting line, or loads of try/catch blocks in
ExoPlayerImplInternal.
Issue: #777
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=114763073
- Format can represent both container and sample formats.
If a container contains a single track (as is true in
DASH and SmoothStreaming) then the container Format can
also contain sufficient information about the samples
to allow for track selection. This avoids the Format to
MediaFormat conversions that we were previously doing in
ChunkSource implementations.
- One important result of this change is that adaptive
format evaluation and static format selection now use the
same format objects, which is a whole lot less confusing
for someone who wants to implement both initial selection
and subsequent adaptation logic. It's not in the V2 doc,
but it may well make sense if the TrackSelector not only
selects the tracks to enable for an adaptive playback, but
also injects a FormatEvaluator when enabling them that will
control the subsequent adaptive selections. That would make
it so that all format selection logic originates from the
same place.
- As part of this change, the adaptiveX variables are removed
from the format object; they don't really correspond to a
single format. This also saves on having to inject the max
video dimensions through a bunch of classes.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=114546777
[Step 4 - Partial, of []
- The capabilities checks previously performed in VideoFormatSelectorUtil
are now performed in MediaCodecVideoTrackRenderer. This means they'll be
useful for non-chunk use cases (e.g. when using ExtractorSampleSource).
- Added capabilities checks for audio in MediaCodecAudioTrackRenderer. We
didn't check audio capabilities previously.
- Added functionality to allow a TrackRenderer to indicate the extent of
its adaptive support.
The idea here is that a TrackSelector (to be introduced) will have access to:
(a) TrackGroups from the SampleSource that indicate whether they support
adaptive playbacks and the formats of each individual track.
(b) TrackRenderers that indicate whether they support adaptive playbacks as
well as how capable they are of rendering formats of individual tracks.
This is everything that a TrackSelector needs from the player components in
order to decide how to wire things up. Note that a TrackSelector may opt to
treat FORMAT_EXCEEDS_CAPABILITIES as FORMAT_HANDLED at its own risk, if it
thinks that it (or the user) knows better. This is a request that we've seen
from third parties for better handling cases where capabilities aren't
accurately reported by the underlying platform.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=114427428
GitHub note - Apologies for the cryptic change descriptions,
they relate to a design doc that's not externally visible.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=113043764
When a seek is performed, renderers currently perform the
actions that they need to take in two places: Some changes
are performed in seekTo implementations. Other changes are
performed when discontinuities are read from the source.
In HLS we need to perform what is effectively a seek
originating in the source. To support this, this CL allows
discontinuities read from the source to modify the playback
position. All actions that renderers perform as a result
of a seek are moved to be performed when a discontinuity is
received.
Best way to understand CL:
- Look at SampleSource interface change and then at the
concrete implementations, to make sure they've been
changed properly.
- Look at SampleSourceTrackRenderer change.
- Look at concrete renderers. The general pattern is that
code previously performed in seekTo and READ_DISCONTINUITY
is merged into onDiscontinuity().
Note: This will be further untangled in V2.
Issue #676
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=112720746
Also apply the workaround for the secure variant of OMX.SEC.avc.dec.
Note that it's not necessary to do the same for the RK decoder in
the method below, since that workaround is targeted at SDK_INT<=17
and secure decoders only came along in 18.
Issue: #603
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=112395376
Targeting to all API level 19 devices using the OMX.SEC.avc.dec
decoder is probably the right thing to do. It shouldn't have
negative implications if we apply the workaround on devices that
don't really need it, except to slow down seeking slightly due
to decoder re-allocation. Given we're talking about JB, I think
the priority should be to "make sure it works".
Issue: #951
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=111514406
This allows implementation and injection of custom MediaCodecSelector
instances. By injecting a custom selector, it's possible for applications
to exert more control over which decoder(s) they instantiate. For example,
applications can force use of a software decoder.
GitHub Issue #938
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=110369810
* Add additional Widevine samples.
* Improve error messaging in demo app around decoders.
* Display toasts for playback errors related to missing insecure
decoders, missing secure decoders, decoder instantiation failure
and decoder query failure.
* Remove checks from SampleChooserActivity, since the above largely
covers off this problem.
- The old approach was technically incorrect, because the checks
were "capacity < sampleSize" and hence neglected the fact that
the buffer position may be greater than 0 (e.g. if the caller
wants to prefix the sample with some additional data).
- Also proactively throw an exception if the buffer is too small,
rather than wait for the failure when we actually do the write.
Remove MPEG TS stream filtering based on AudioCapabilities.
Pass AudioCapabilities to MediaCodecAudioTrackRenderer so it can choose between
passthrough/raw and decoding for AC-3 tracks.
- Generalize rendererEnabledFlags to be selected track indices through
ExoPlayerImpl/ExoPlayerImplInternal.
- Selecting an out-of-bound track index (e.g. -1) is equivalent to
disabling a renderer prior to the generalization.
- A prepared TrackRenderer that exposes 0 tracks is equivalent to a
TrackRenderer in the STATE_IGNORE state prior to the generalization.
Issue #514.
1. Workaround for decoders that fail to handle the END_OF_STREAM flag.
2. Revert processing of final output buffer if it's non-empty. This
introduced another bug (#596)
Reverts: b88012f51f
Issue: #417
Issue: #596
1. Remove requirement for TrackRenderer implementations to report
current position, unless they are time sources.
2. Expose whether renderers have media to play. The immediate benefit
of this is to solve the referenced GitHub issue, and also to only
display the appropriate Audio/Video/Text buttons in the demo app
for the media being played. This is also a natural step toward
multi-track support.
Github issue: #541
This makes it so that it's no longer necessary to specify the number
of downstream renderers to HlsSampleSource, FrameworkSampleSource and
ExtractorSampleSource, by forcing the downstream renderers to register
with the SampleSource instances in their constructors. This eliminates
a common source of subtle client bugs where the passed value is incorrect.
This also fixes a technical mistake where HlsChunkSource is fed
seekPositionUs=-1 when obtaining the first chunk. This is wrong,
but the usage of this variable within HlsChunkSource enforces that
the seek must stay within bounds, so we get away with it.
Issue: #385
The OMX component needs to be configured with a format that has a
MIME type of audio/raw. Remove Ac3PassthroughAudioTrackRenderer,
which is no longer used.
