This change fixes a bug with seeking forward in MIDI. When seeking forward,
the progressive media period attempts to seek within the sample queue, if a
key-frame exists before the seeking position. With MIDI, however, we can
only skip Note-On and Note-Off samples and all other samples must be sent
to the MIDI decoder.
When seeking outside the sample queue, the MidiExtractor already
instructs the player to start from the beginning of the MIDI input. With
this change, only the first output sample is a key-frame, thus the
progressive media period can no longer seek within the sample queue and
is forced to seek from the MIDI input start always.
Issue: androidx/media#704
#minor-release
PiperOrigin-RevId: 584321443
The live offset override is used to replace the media-defined
live offset after user seeks to ensure the live adjustment adjusts
to the new user-provided live offset and doesn't go back to the
original one.
However, the code currently clips the override to the min/max
live offsets defined in LiveConfiguration. This is useful to
clip the default value (in case of inconsistent values in the media),
but the clipping shouldn't be applied to user overrides as
the player will then adjust the position back to the min/max
and doesn't stay at the desired user position.
See 2416d99857 (r132871601)
#minor-release
PiperOrigin-RevId: 584311004
Composition and EditedMediaItemSequence don't allow empty lists in their main
constructors, so shouldn't the vararg API. This is more inline with Effective
Java item 53.
PiperOrigin-RevId: 583415124
When transmuxing, the `EncodedSampleExporter` maintains a queue of input
buffers that get filled with encoded data by the asset loader. The number of
buffers was limited to avoid using more and more memory if producer (asset
loader) gets far ahead of the consumer (exporter).
Previously this limit was fixed at 10 buffers, but increasing the number of
buffers can make some transmux operations much faster. Allow allocating between
a min and max number of buffers, and also set a target allocation size beyond
which new buffers can't be allocated. This allows audio formats which require
many small buffers to be processed more quickly, while preventing allocating
too much memory for hypothetical very high bitrate formats.
'Remove video' edits on local videos in particular get much faster, because
audio buffers are very short and there are lots of them. With a sample 10
minute video, a 'remove video' edit took 2 seconds (36 seconds before this
change). With a sample 1 minute removing video took 0.25 seconds after this
change (2.5 seconds before).
The speed improvement is smaller for other types of edits that retain the video
track. Transmuxing a 10 minute video retaining the video track took 26 seconds
(40 seconds before).
PiperOrigin-RevId: 583390284
In some contexts (e.g. BottomSheetDialogFrament), Material Design
themes will override the default of singleLine=false to true. This
causes layout problems because the forward/rewind buttons are no
longer visible with singleLine=true.
This problem can be avoided by explicitly requesting the default
value of false in our layout files.
Issue: androidx/media#511
#minor-release
PiperOrigin-RevId: 582604131
This removes the flakiness of the HLS playback test as well.
Previously, this flow only worked for standalone WebVTT subtitles (7b762642db)
PiperOrigin-RevId: 582359383
The test is hidden behind the `@Ignore` annotation due to some
flakiness. However, it will be removed when the subtitle parsing is
moved to a pre-sample-queue architecture.
The test media was created with:
```shell
$ cp ../../dash/standalone-ttml/sample.xml sample.ttml
$ MP4Box -add sample.ttml sample.text.mp4
$ MP4Box -frag 10000 sample.text.mp4
$ rm sample.ttml
```
PiperOrigin-RevId: 582347113
This helps to play ads where the file extension is not sufficient
to deduce the correct source in DefaultMediaSourceFactory.
PiperOrigin-RevId: 582340114
Currently, ads are only defined by a single URL, which makes it
impossible to define additional fields needed to play ads correctly.
This can be fixed by using a full MediaItem in AdPlaybackState,
replacing the previous Uri field.
PiperOrigin-RevId: 582331588
Use renderengine's PQ to SDR tone-mapping implementation instead
of naive implementation from before.
This improves luminance on highlights, as seen in the test image.
PiperOrigin-RevId: 582318045
MIME types are case-insensitive, but none of the many existing
comparisons across our code base take this into account. The
code can be made more robust by normalizing all MIME types at the
moment they are first set into a class/builder and adding toLowerCase
as part of the normalization.
Most concretely, this fixes an issue with playing HLS streams via
the IMA SDK where the stream MIME type is indicated with all lower
case "application/x-mpegurl", which failed the MIME type comparison
in DefaultMediaSourceFactory.
PiperOrigin-RevId: 582317261
All methods in VideoFrameProcessor are expected to be called by the owning thread,
as far as I understand (vs. 10 threads each queuing frames/textures/streams, which
invalidates blocking done by registerInputStream and flush)
PiperOrigin-RevId: 582295240
BundledChunkExtractor creates a JpegExtractor or a PngExtractor if the
chunk's MIME type is JPEG or PNG respectively.
The JpegExtractor is instantiated to load an image track.
PiperOrigin-RevId: 582005828
Skip wearable devices, which don't have the same CDD requirements on codecs from Android 5 (API 21).
Limit an existing skipping case to pre API 33 devices, so that we can catch failures on Android 13 (API 33) onwards, and add OnePlus 9 Pro which also times out calculating SSIM. Remove TODOs for removing test/SSIM skipping now they are restricted to API version.
PiperOrigin-RevId: 581985554
This device over-reports encoding capabilities, so skip the test.
This is a Pixel device that was upgraded to Android 12 (API 31/32) so the issue should only affect devices that didn't take OTAs.
PiperOrigin-RevId: 581981073
Instantiate an ImageRenderer and add it to the list returned by
DefaultRenderersFactory.buildRenderers.
Add Renderer.MessageType.MSG_SET_IMAGE_OUTPUT and
ExoPlayer.setImageOutput to enable setting a custom
ImageRenderer.imageOutput.
Add ImageRenderer.handleMessage to process messages sent to the
renderer.
PiperOrigin-RevId: 581962451
Based on on-device testing, this device seems to have the same issue as Moto G (20) where frames are dropped despite configuring the decoder not to drop frames.
PiperOrigin-RevId: 581943805
The dump file diff as part of this change is because using AudioGraph
means the 2nd item is automatically edited to match the AudioFormat of
the 1st item {44.1KHz mono}, rather than {48KHz stereo}.
Manually verified that for the 2nd item, data output:
* Before: 66936 bytes (16734 frames) output = 348_625us of audio.
* After: 30750 bytes (15375 frames) output = 348_639us of audio.
The small final buffer is caused by SonicAudioProcessor outputting all
pending data when EOS queued, and is WAI.
PiperOrigin-RevId: 580494578
Changes includes:
1. Add resume flow.
2. Change demo app code to resume export.
3. Changes in test infra to trigger resume.
4. E2E Test cases
PiperOrigin-RevId: 579895744
Both interfaces are not really needed as the methods can be called
on the respective classes directly. This also avoid error-prone
situations where classes define to/fromBundle methods with parameters
that should be used instead of the parameter-less version.
Also deprecate all existing CREATOR static instances and make the
corresponding fromBundle method public where needed.
PiperOrigin-RevId: 579189766
* Rename method f(n) to a more helpful name.
* Move the private inner class to the bottom.
* Move public fields before private fields but below the static field.
* Make `private ParsableByteArray data` final.
* Make sure `parseSequenceHeader` can only be called once.
DefaultTrackSelector now has all logic necessary for selecting an
image track.
If isPrioritizeImageOverVideoEnabled is set to true, image track will
try to be selected first and a video track will only be selected if no
image track is available. If isPrioritizeImageOverVideoEnabled is set
to false, image track will be selected only if video track wasn't
selected.
PiperOrigin-RevId: 578806006
The native code can now reallocate the buffer if it needs to grow
its size, so we have to reacquire a reference in the Java code to
avoid accessing a stale instance.
This fixes a bug introduced by 8750ed8de6.
PiperOrigin-RevId: 578799862
BundleableUtil is the only class that really depends on the type
inheritence from Bundleable. However, it only needs this as a way
to define Function<T, Bundle> and Function<Bundle, T>, which could
just be passed in as parameters as it's already done for some of
these methods.
Also rename the class to BundleCollectionUtil accordingly.
PiperOrigin-RevId: 578791946
Android Studio removed some nested imports, but I think the extra
qualification at the usage site is actually mostly helpful, so I'm
leaving it as-is.
PiperOrigin-RevId: 578518880
Unfortunately we can't fail any more obviously at this point, because
manifests often contain config for multiple DRM schemes, and when
parsing the manifest we don't know which scheme is going to be used for
playback. It would be unreasonable to fail playback due to incomplete
ClearKey config if playback was otherwise going to succeed using e.g.
Widevine.
* Issue: androidx/media#777
* Issue: androidx/media#563
* Issue: google/ExoPlayer#9169
#minor-release
PiperOrigin-RevId: 578491484
The toBundle method should only be used for remote processes,
because there is a separate method for in-process bundling.
Renaming the method makes this more explicit and less error-prone.
PiperOrigin-RevId: 578456532
This moves the invocation of `transferInitializing` slightly earlier,
but this is consistent with other `DataSource` implementations like
`OkHttpDataSource`.
PiperOrigin-RevId: 578137236
This has been documented to work since this class was created, but until
now we were always trying to resolve using the current application's
`Resources.getIdentifier` method. This commit changes to resolve to the
other app's `Resources` object if the package name doesn't match the
current package.
This will only work if the current app has package-visibility to the
destination package: http://g.co/dev/packagevisibility
This is hard to test because to do so robustly requires being able to
guaranteed that another test APK will be installed with a known raw
resource inside it.
PiperOrigin-RevId: 577864992
This change applies to standalone WebVTT files linked directly from the manifest.
Since DASH only supports stand-alone IMSC1 (TTML) and WebVTT text files, this change concludes the support extension of text-based subtitle files to be parse during extraction.
PiperOrigin-RevId: 577468830
This change applies to standalone TTML files linked directly from the manifest.
As a result, we no longer have the flakiness in the DashPlaybackTest which uses sidecar-loaded (standalone file) TTML subtitles. We experimentally opt into parsing subtitles during extraction and use SubtitleExtractor in hybrid mode.
PiperOrigin-RevId: 577457256
Throws when calling flush when there's no active input, for example
before an input stream is registered or after all output streams have
ended.
PiperOrigin-RevId: 577165419
This CL adds an isPrioritizeImageOverVideoEnabled flag to
TrackSelectionParameters and an API to set the flag value.
The flag will be used by DefaultTrackSelector to determine whether
to select an image track if both an image track and a video track are available.
PiperOrigin-RevId: 576175162
When transmuxing, we usually only need to offset the timestamp by the position of a mediaItem in a sequence.
Trim optimization introduces another type of offset: for the transmux of the second part of the video we need to offset the timestamps by the total duration already trancoded by transformer.
PiperOrigin-RevId: 576134656
The events happens in the following order, assuming two media items:
1. First media item is fully decoded, record the last frame's pts
- Note frame processing is still ongoing for this media item
2. Renderer sends `onOutputFormatChanged()` to signal the second media item
3. **Block sending the frames of the second media item to the `VideoSink`**
4. Frame processing finishes on the first media item
5. The last frame of the first media item is released
6. **Reconfigure the `VideoSink` to apply new effects**
7. **Start sending the frames of the second media item to the `VideoSink`**
This CL implements the **events in bold**
PiperOrigin-RevId: 576098798
Some devices supporting Performance Points for decoder coverage are missing coverage over the CDD requirements for H264. For these cases ExoPlayer should fall back to legacy resolution and frame rate support checks. If there is an H264 stream evaluated as a `PerformancePointCoverageResult` of `COVERAGE_RESULT_NO`, then ExoPlayer checks for coverage of the [720p CDD requirement](https://source.android.com/docs/compatibility/10/android-10-cdd#5_3_4_h_264).
Issue: google/ExoPlayer#10898
Issue: androidx/media#693
PiperOrigin-RevId: 575768836
This change moves the handling of any media button event into
`MediaSessionImpl.onMediaButtonEvent(intent)`. This includes
the double click handling from `MediaSessionLegacyStub`.
The advantage is that everything is in one place which allows
to offer `MediaSession.Callback.onMediaButtonEvent` with which
an app can override the default implementation and handle media
buttons in a custom way.
Media button events can originate from various places:
- Delivered to `MediaSessionService.onStartCommand(Intent)`
- A `PendingIntent` from the notification below API 33
- An `Intent` sent to the `MediaButtonReceiver` by the system dispatched
to the service
- Delivered to `MediaSessionCompat.Callback.onMediaButtonEvent(Intent)`
implemented by `MediaSessionLegacyStub` during the session is active
- Bluetooth (headset/remote control)
- Apps/system using `AudioManager.dispatchKeyEvent(KeyEvent)`
- Apps/system using `MediaControllerCompat.dispatchKeyEvent(keyEvent)`
Issue: androidx/media#12
Issue: androidx/media#159
Issue: androidx/media#216
Issue: androidx/media#249
#minor-release
PiperOrigin-RevId: 575231251
Player methods shouldn't be called if they are not available and the
entry point to the playback resumption flow only checks
COMMAND_PLAY_PAUSE.
#minor-release
PiperOrigin-RevId: 574834148
If an app rejects the connection of the internal media notification manager
the session should behave like without the the media notification controller.
The legacy System UI controller should not be hidden or even rejected to
connect in such a case.
#minor-release
PiperOrigin-RevId: 574807901
Since DEFAULT_MAX_CHANNEL_COUNT was increased from 8 to 10,
getMaxSupportedChannelCountForPassthrough always throws if its loop
enters its second iteration (channelCount of 9). This is due to
Util.getAudioTrackChannelConfig returning CHANNEL_INVALID when passed a
channelCount of 9, and setting CHANNEL_INVALID as the AudioFormat's
channel mask throws an exception.
This change skips each iteration where CHANNEL_INVALID is returned.
HttpEngine was added in Android SDK 34. This DataSource is preferable to the DefaultHttpDataSource if supported as it offers better performance and more modern features.
PiperOrigin-RevId: 574594553
The current formatting makes the 'scheme' part of the list blend into
the definition, especially when the definition is multi-line.
https://developer.android.com/reference/androidx/media3/datasource/DefaultDataSource
I considered adding another level of nesting, but I think bold will
help distinguish the structure of the list without adding too much HTML
or visual whitespace.
#minor-release
PiperOrigin-RevId: 574514208
As Opus decoders skip some bytes prior to playback during a seek, the renderer for bypass playback should send samples to the decoder even if they would be decode-only.
#minor-release
PiperOrigin-RevId: 574494666
This replaces the SimpleBitmapLoader that can now be deprecated
as it's fully unused and doesn't provide any additional functionality.
#minor-release
PiperOrigin-RevId: 574454636
The `PreloadMediaSource` has below two new public methods that suppose to be called by the app:
* `preload(long)` allows the apps to preload the source at the passed start position before playback. The preload efforts include preparing the source for a `Timeline`, creating and caching a `MediaPeriod`, preparing the period, selecting tracks on the period and continuing loading the data on the period.
* `releasePreloadMediaSource()` allows the apps to release the preloaded progress.
The `PreloadMediaPeriod` is designed to facilitate the `PreloadMediaSource` for the preloading work. It has a new package-private method `selectTracksForPreloading` which will cache the `SampleStream` that corresponds to the track selection made during the preloading, and when the `PreloadMediaPeriod.selectTracks` is called for playback, it will uses the preloaded streams if the new selection is equal to the selection made during the preloading.
Also add a shortform demo module to demo the usage of `PreloadMediaSource` with the short-form content use case.
PiperOrigin-RevId: 574439529
This change moves the release timestamp adjustment logic out of
MediaCodecVideoRenderer and into a standalone component, the
VideoFrameReleaseControl. The plan for VideoFrameReleaseControl is to use
it:
- from MediaCodecVideoRenderer, when ExoPlayer plays video in standalone
mode.
- from the CompositionPlayer's DefaultVideoSink, when CompositionPlayer
supports multiple sequences.
- (temporarily) from the CompositionPlayer's custom ImageRenderer while
we are implementing single-sequence preview, which is an intermediate
milestone for composition preview.
PiperOrigin-RevId: 574420427
Media button event coming from the `MediaSessionService` are delegated
to the `MediaSessionImpl` and then sent to the session by using the
`MediaSessionStub` directly instead of using the `MediaController`
API.
Splitting the `MediaController.Listener` and `Player.Listener` in
`MediaNotificationManager` got reverted, and both listener are set to the
controller as before. This reverts the change that introduced a
different timing behaviour. It still holds, that a listener
registered on a `MediaController` that calls a method like `play()` is
called immediately and before the call has arrived at the player. This
change works around this behaviour from the library side by calling
`MediaSessionStub` directly with a `ControllerInfo`.
#minor-release
PiperOrigin-RevId: 573918850
I couldn't work out a good way to set up a test environment with
an asset in a different package, so I'm not adding a test for the
package overriding.
PiperOrigin-RevId: 573843326
Android Auto shows a queue button when the queue is not empty.
Apps were able to remove this queue button with the legacy API
by not setting the queue of the session.
After this change, removing `COMMAND_GET_TIMELINE` from the commands
of the media notification controller or the session player sets the
queue in the platform session to null.
#minor-release
Issue: androidx/media#339
PiperOrigin-RevId: 573813558
This is the documented format of this URI. The previous test was
exercising an undocumented format. Support for the previous format is
kept (and documented) because it seems to be relatively common (despite
the package name not being needed or used).
PiperOrigin-RevId: 573756190
Previously, we calculated the next playlist reload time by adding the target duration (or half of it, depending on whether there is a real update in the new playlist snapshot) from the last load completion time, which makes the reload interval as long as `targetDuration(or half of it) + lastLoadDuration`. While still complying to the standard that "the client MUST wait for at least the target duration before attempting to reload the Playlist file again", this could cause buffering when the playback position is close to the end of live window. This change is to calculate the reload interval accurately by not adding the term `lastLoadDuration`.
Issue: androidx/media#663
#minor-release
PiperOrigin-RevId: 573300009
All production and test callers of the non-incremental methods are
already migrated, so we can remove them in this change too.
#minor-release
PiperOrigin-RevId: 573207318
If the `Subtitle` has 'active' cues at `OutputOptions.startTimeUs`, this
change ensures these are emitted in a `CuesWithTiming` with
`CuesWithTiming.startTimeUs = OutputOptions.startTimeUs`. If
`OutputOptions.outputAllCues` is also set, then another `CuesWithTiming`
is emitted at the end that covers the 'first part' of the active cues,
and ends at `OutputOptions.startTimeUs`.
As well as adding some more tests to `LegacySubtitleUtilWebvttTest`,
this change also adds more tests for `TtmlParser` handling of
`OutputOptions`, which transitively tests the behaviour of
`LegacySubtitleUtil`.
#minor-release
PiperOrigin-RevId: 573151016
All the production code is already calling these new incremental
methods, migrating the tests allows us to remove the old
`List`-returning methods in a follow-up change.
#minor-release
PiperOrigin-RevId: 572822828
PlayerInfo bundling is costly and we can add a shortcut for
in-process binder calls where we store the direct object
reference in a live Binder object that can be written to the
Bundle instead of the individual data fields.
#minor-release
PiperOrigin-RevId: 572816784
A few methods in PlayerInfo and related classes combine filtering
information with bundling in one method. This makes it impossible
to use just the filtering for example and it's also easier to reason
about than two dedicated methods. This change splits these methods
into two parts accordingly.
PiperOrigin-RevId: 572592458
When the controller of the `MediaNotificationManager` is disconnected,
the session is removed from the service without checking whether the
session hasn't already been removed. This caused flakiness in `MediaSessionServiceTest.addSession()`.
Because there is a public API `MediaSessionService.removeSession()`,
the controller can't make an assumption whether the session is still
contained in the service when being disconnected.
#minor-release
PiperOrigin-RevId: 572568350
Looping through all MIME types is a bit hacky, but seems like a nice way
to check "all" MIME types (or at least more than a random selection).
PiperOrigin-RevId: 572508027
This currently only applies to subtitles muxed into mp4 segments, and
not standalone text files linked directly from the manifest.
Issue: androidx/media#288
#minor-release
PiperOrigin-RevId: 572263764
Interrupting the main thread in particular may be dangerous
as the flag is not cleared after handling the current message.
#minor-release
PiperOrigin-RevId: 572259422
This gives access to the replacement behavior for a particular subtitle
format without needing to instantiate a `SubtitleParser`.
#minor-release
PiperOrigin-RevId: 572226084
In particular:
- Add allowAudioNonSeamlessAdaptiveness parameter (default true, same
as video and as already implemented by default)
- Forward mixedMimeTypeAdaptation support to AudioTrackScore
(as for VideoTrackScore) and adapt mixed MIME type adaptive
support accordingly
- Check adaptive support when deciding whether a track is allowed for
adaptation (also same check as for video). This takes the new
parameter into account.
#minor-release
PiperOrigin-RevId: 572191308
When used within the same process, we don't have to go via the
onTransact method (which includes marshalling and unmarhsalling
the data), but can directly return the list.
#minor-release
PiperOrigin-RevId: 572179846
