The current code only works if the tts:ruby attributes are defined
directly on the in-line elements. This changes that so we also consider
tts:ruby attributes on `style` nodes referenced by ID.
PiperOrigin-RevId: 319515177
We don't need the renderer immediately after stopping, so the
renderer should not throw a checked exception until it's used again.
This is inline with the not throwing from disable().
Also, none of the known implementation throw an exception at the moment
and all reasonable base classes omit the throws clause already.
PiperOrigin-RevId: 319503643
They are all for Context.getSystemService that is allowed to return
null. In most cases where we need to service, we make an assertion that
it is available.
PiperOrigin-RevId: 319503557
The test was incorrectly assuming that with LooperMode.PAUSE,
HandlerThread instances needed explicit calls to execute
tasks. This commit fixes the test flakiness by manually pausing the
HandlerThead when needed.
PiperOrigin-RevId: 319411552
Without checking if getFramesPerEncodedSample fails,
the frame count becomes negative which leads to
hard to debug errors.
PiperOrigin-RevId: 319247618
Passthrough mode can use a codec or not, but
the code only mentioned "passthrough" in most cases,
making the specific mode confusing.
For example both `MediaCodecRenderer` and
it's derived class `MediaCodecAudioRenderer`
had a private `passthroughEnabled` field,
but they were used for the opposite modes!
This change renames all relevant variables/functions
to explicit `CodecPassthrough` or `Bypass`.
PiperOrigin-RevId: 319225235
The system services may return a null value if the service is
not available. Guard against this by falling back to default values.
PiperOrigin-RevId: 319187882
Issue: #7011
Issue: #6725
Issue: #7066
This also mitigates (but doesn't fix) Issue: #4133 because it
prevents a second key load after a short clear section.
PiperOrigin-RevId: 319184325
SampleStreams should always provide samples starting from a keyframe.
We do not have equivalent logic in any of our extension decoder renderers.
PiperOrigin-RevId: 319012365
The list of MediaSourceHolder in ExoPlayerImpl is only maintained to be able to create a PlaylistTimeline for masking. By keeping only the id and a snapshot of the timeline of the MediaSourceHolder in ExoPlayerImpl, parallel access is prevented and we still have sufficient information to create the masking timeline.
PiperOrigin-RevId: 319003837
We can't restore the previous state of the remaining chunk, so we can't
support discarding from spliced-in chunks. Mark this explicitly instead
of attempting to discard from the previous chunk.
PiperOrigin-RevId: 318983628
This fixes an issue where, even if captioning manager is disabled, the latest used captioning manager preference
related to text size is being applied.
In order to replicate:
1. Go to Captioning Preferences under device Settings and enable it
2. Change the text size to "very large"
3. Observe the selected text size is used for subtitles, for example in Youtube
4. Go to Captioning Preferences under device Settings and disable it
5. Observe the text size used for subtitles does not come back to normal, stays on "very large"
- Deprecate constructors that don't take an executor, to direct
developers toward the new ones. Callers can trivially pass
Runnable::run to one of the new ones if they want old behaviour.
- Add comment explaining warning suppression added in the CL that
added parallelised download support.
Issue: #5978
PiperOrigin-RevId: 318803296
This enhances readability, particularly as those methods will become
more complex when partially fragmented media will be supported.
PiperOrigin-RevId: 318795536
Previously only pcm encoding were stored in Format,
this was an issue as for audio passthrough and offload
lots of code needs to pass complex format informations
(encoding, sample rate, channel count, gapless metadata)
but could not use Format and each function was taking
each as different parameter.
By allowing Format to contain any encoding, and not only
pcmEncoding, it allows to pass a Format everywhere in ExoPlayer
code that needs a Format.
This patch does not have any functional change. It is only an internal refactor.
PiperOrigin-RevId: 318789444
Gapless offload is fixed in later R beta builds of all Pixels supporting R.
On the firsts R beta builds of Pixel 4, run the following command.
`setprop vendor.audio.offload.gapless.enabled true`.
It can not be enabled on the first Pixel 2 and 3 beta build.
PiperOrigin-RevId: 318436134
This it is enabled only on a list of
manually tested devices.
The list is empty in this CL.
*** Reason for rollforward ***
Fixed dependent cl was rolled forward.
*** Original change description ***
Rollback of 962e08d3be
*** Original commit ***
Add Offload gapless support
Confirmed to work on a Pixel 4 after enabling the feature:
`setprop vendor.audio.offload.gapless.enabled true`
***
***
PiperOrigin-RevId: 318433123
*** Reason for rollforward ***
Fixed dependent cl was rolled forward
*** Original change description ***
Rollback of 2aac0717d7
*** Original commit ***
Propagate format in supportsOutput
It is needed to know if gapless is needed,
as gapless offload might not be supported.
***
***
PiperOrigin-RevId: 318429321
*** Reason for rollforward ***
Rollforward after making sure the handler is created,
and that a test is written preventing a
similar regression.
*** Original change description ***
Rollback of b6f5a263f7
*** Original commit ***
Rollforward of commit 5612ac50a3.
*** Reason for rollforward ***
Rollforward after making sure the handler is created
from the playback thread and not from an app thread.
*** Original change description ***
Rollback of e1beb1d194
*** Original commit ***
PiperOrigin-RevId: 318274400
Ignore two tests in AsynchronousMediaCodecBufferEnqueuerTest
until the ShadowMediaCodec's behavior is updated to apply
input buffer ownership.
PiperOrigin-RevId: 318251859
The existing code moves a multi-line cue box by multiples of the height
of the whole cue box (incorrect), rather than multiples of the first
line of text (correct). These two are equivalent for single-line cues,
which is why I didn't initially spot the problem.
PiperOrigin-RevId: 318036793
Numerical lines conceptually map to a grid of lines in the viewport,
with the Cue text lines being aligned to one of the viewport lines.
It doesn't make sense to position a single-line cue differently based
on lineAnchor when it's expected to 'snap' to a particular line on the
viewport grid. So we redefine the position to be in terms of the cue
lines rather than the bounds of the cue box.
It's also not possible to always handle ANCHOR_TYPE_MIDDLE when
lineType=NUMBER (as it relies on the number of lines in the cue being
odd), so it's easier to ignore lineAnchor completely.
PiperOrigin-RevId: 318034664
This removes a lot of duplication from the module configuration,
avoids divergence, and makes sure that only the important differences
to the default are visible in each module file.
PiperOrigin-RevId: 318024823
Postrolls would be skipped because the period duration wasn't know at
the moment of resuming playback after backgrounding, so the position
wouldn't be resolved to resume the postroll ad.
We have the period duration stored in the AdPlaybackState, so we can
use that directly.
Issue: #7518
PiperOrigin-RevId: 317830418
They currently fall back to the main Looper if the current thread
doesn't have a Looper. All the changed Handlers are guaranteed to
be created on a thread with a Looper (mostly the ExoPlayer playback
Looper) and thus can make this stricter assumption. This makes it
easier to reason about the code as there are no ambiguities as to which
thread the Handler is running on.
PiperOrigin-RevId: 317334503
The setForeground mode method blocks in the same way as release
and should use the same timeout if configured.
In case the method runs into the timeout, a player error is reported.
PiperOrigin-RevId: 317283808
*** Original commit ***
Rename Util methods to clarify which Looper is used.
The method name didn't clarify that either the main or current
Looper is used.
***
PiperOrigin-RevId: 317283606
- It seems conceptually simpler for DefaultExtractorsFactory
- It seems unlikely we'll need to diverge the two. In the case of
workaround flags we can just have them be no-ops in the version
that doesn't need them.
PiperOrigin-RevId: 317151955
Looks like this change was introduced in
<unknown commit>
onKeysRemoved is currently not triggered in DefaultDrmSessionManager
as far as I can tell. It seems like it should be called from here.
PiperOrigin-RevId: 317072794
It seems more natural given we always end up instantiating a Matroska extractor,
not one that's specific to the WebM subset of Matroska. There's also no reason
not to support Matroska MIME types in DASH.
PiperOrigin-RevId: 316975451
*** Original commit ***
Rollforward of commit 5612ac50a3.
*** Reason for rollforward ***
Rollforward after making sure the handler is created
from the playback thread and not from an app thread.
*** Original change description ***
Rollback of e1beb1d194
*** Original commit ***
Expose experimental offload scheduling
Add a new scheduling mode that stops ExoPlayer main loop
when the audio offload buffer is full and resume it...
***
PiperOrigin-RevId: 316914147
*** Reason for rollforward ***
Rollforward after making sure the handler is created
from the playback thread and not from an app thread.
*** Original change description ***
Rollback of e1beb1d194
*** Original commit ***
Expose experimental offload scheduling
Add a new scheduling mode that stops ExoPlayer main loop
when the audio offload buffer is full and resume it when
it has been partially played.
This mode needs to be enabled and dissabled manually by the app
for now.
#exo-offload
***
***
PiperOrigin-RevId: 316898804
Ads can appear due to asynchronous ad tag requests completing after
earlier ads in a pod have loaded, so remove the requirement that the
ad count can't change. The MediaPeriodQueue should handling discarding
buffered content if an ad appears before already buffered content, so
I think this case is actually handled correctly by the core player
already.
Also remove the requirement that an ad URI can't change. This is a
defensive measure for now, but it's likely that a later fix in the IMA
SDK for an issue where loadAd is not called after preloading then
seeking before a preloaded ad plays will result in loadAd being called
more than once, and I think it's possible that the second call to
loadAd may have a different URI. Because the ad URI should only change
after an intermediate seek to another MediaPeriod, there shouldn't be
any problems with buffered data not getting discarded.
Issue: #7477
PiperOrigin-RevId: 316871371
The test was trying to synchronize a background decoding thread by
waiting for pending decode calls. However, the background thread needs
to fully queue the newly available output buffer before we can stop
waiting to ensure it's actually fully predictable. So we change the
pending wait to wait until the input buffer is cleared, which only
happens after the decoder is definitely done with it.
Also properly clean-up decoder (including shutting down the background
thread).
PiperOrigin-RevId: 316870659
- Leaving the TODO, since there are still MIME types we're unsure about.
- Removing AAC because xHE-AAC does not have this property. We may re-add
it with an additional profile check to exclude xHE-AAC in the future.
PiperOrigin-RevId: 316715147
We haven't seen it used anywhere in practice. It's a niche feature not
supported by any other extractors, and is one of the very few things
stopping us from simplifying MediaSource implementations to not set the
decodeOnly sample flag. This is a simplification that we want to make,
since the current mechanism doesn't work properly for cases where a
downstream decoder adjusts the buffer presentation timestamps so that
they're different on the output side than on the input side.
PiperOrigin-RevId: 316712302
This flag isn't needed anymore because the waiting for keys happens on
the source side and the source just returns NOTHING_READ under the
same conditions.
PiperOrigin-RevId: 316704214
We started using this method from other tests unrelated to
TestExoPlayer, so the method is better placed inside a generic Util
class.
PiperOrigin-RevId: 316675067
This change adds MediaSource.getMediaItem and deprecates MediaSource.getTag. For backwards compatibility, the tag is made available through the Window with `mediaItem.playbackProperties.tag` as well as in the deprecated `tag` attribute.
PiperOrigin-RevId: 316539752
Using the default offset as a magic constant makes tests hard to
understand. Improve that by looking up the value from the timeline or
setting it explicitly in multiple places, so the relationship becomes
clear.
PiperOrigin-RevId: 316421977
The correct order of initializing the MediaCodec should be (as per
documentation
https://developer.android.com/reference/android/media/MediaCodec#initialization)
"create -> setCallback -> configure -> start"
but the MediaCodecRenderer currently does
"create -> configure -> setCallback -> start"
MediaCodec implementations did not complain about this so far, but the
wrong sequence does not work with the MediaCodec in block mode (new mode
in Android R) and also the ShadowMediaCodec won't operate in
asynchronous mode otherwise. To initialize the MediaCodec in the correct
order, this commit adds configure() in the MediaCodecAdapter so the
MediaCodecRenderer can do:
adapter.configure(); // sets the callback and then configures the codec
adapter.start(); // starts the codec
PiperOrigin-RevId: 316127680
