Unlike Assertions, the introduced method cannot be disabled and throws
a ParserException instead. This method is meant to replace regular
assertions (which throw RuntimeExceptions) which check input in the
parsing code.
PiperOrigin-RevId: 375085160
We need to avoid reading and skipping into preload chunks as they
may need to be discarded. The current code iterates over all chunks,
but this can be simplified by just checking the last chunk knowing
that the preload chunk must always be the last one.
As a result, we avoid calling getFirstSampleIndex on all chunks. This
is a bug since the method is not allowed to be called for chunks
that have been spliced in. This still leaves the smaller issue of
potentially calling this method for spliced-in preload chunks, which
will be solved separately.
Issue: #8937
#minor-release
PiperOrigin-RevId: 375053638
Preload chunks may still need to be discarded. However, we don't
currently support discarding spliced-in chunks. Thus, we need to
avoid loadng a preload chunk that needs to be spliced-in.
Issue: #8937
#minor-release
PiperOrigin-RevId: 374851661
This media source wraps another source and publishes a Timeline with
ads. The created MediaPeriods for ad and content are mapped back to
the original stream to allow seamless playback.
PiperOrigin-RevId: 374836091
There is a newly added condition to help advancing between SSAI ads
and content in case the ad group position or ad duration changed. The
condition currently doesn't check directly whether it's a SSAI
transition but relies on indrect signals. Making this more direct
helps to understand the purpose and avoid unintentional bugs where
this condition would apply in other cases too.
In addition, we need to exclude TextRenderer from the check because
its read position doesn't correspond to the actual decode position
since the decoding happens in the renderer itself (b/181312195).
PiperOrigin-RevId: 374835985
We can instead just save this information in MediaPeriodInfo, similar
to how we store whether the MediaPeriod is last in the timeline etc.
PiperOrigin-RevId: 374835918
It only covers MediaSession - MediaController
(Does not consider cases that either a legacy session or a legacy controller is involved)
Add PlayerInfo#Builder to clean it up.
PiperOrigin-RevId: 374785779
Notes:
- The only functional change is that createForRemote now assings ERROR_CODE_REMOTE_ERROR.
- createForSource still uses ERROR_CODE_UNSPECIFIED, even though it expects an
IOException. The reason for not using ERROR_CODE_IO_UNSPECIFIED is that the reason for
the error might not be IO. For example, malformed media, or BehindLiveWindowException,
which have non-IO error codes. So using UNSPECIFIED saves a later change in category.
PiperOrigin-RevId: 374390407
When working with SSAI ads, we need to easily convert positions between
the underlying stream and the media model that exposes ad groups. To
simplify this, we can add util methods (that are testable on their own).
In addition, we need an easy way to build AdPlaybackStates for SSAI
inserted ads. The metadata is obtained out-of-band and usually has the
ad group start and end times in the underlying stream only. Hence, we
also add a util method to add a new ad group based on this information.
PiperOrigin-RevId: 374369360
MediaSession default command state contains all
commands.
To avoid having to update MediaSession when a command
is added, allow to create a Commands.Builder that
starts with all commands.
PiperOrigin-RevId: 374183484
Make ForwardingPlayer implement Player and not extend BasePlayer so that
ForwardingPlayer forwards each Player method directly to the wrapped
Player instance.
PiperOrigin-RevId: 374161084
Fix bug where rubies and boutens are missing, tate-chu-yoko is rendered
incorrectly when SubtitleView.setApplyEmbeddedStyles(false). This method
should only affect styling elements and not remove any language features.
There are two main changes that need to be made:
1. Whenever we determine the next ad to play, we need to select a
server-side inserted ad even if it has been played already (because
it's part of the stream).
2. When the Timeline is updated in the player, we need to avoid changes
that would unnecessarily reset the renderers. Whenever a Timeline
change replaces content with a server-side inserted ad at the same
position we can just keep the existing MediaPeriod and also if the
duration of the current MediaPeriod is reduced but it is followed by
a MediaPeriod in the same SSAI stream, we can don't need to reset
the renderers as we keep playing the same stream.
PiperOrigin-RevId: 373745031
In Android 12 mutability flags have to be set on PendingIntents. If they are not, and the app targets Android 12, then the app will be crashed by the system.
PiperOrigin-RevId: 373427591
Content after ad groups currently always resumes at the ad break position (unless
overridden by a seek or similar). In some cases, media inserting ads wants to
specify an offset after the ad group at which playback should resume. A common
example is a live stream that inserts an ad and then wants to continue streaming
at the current live edge.
Support this use case by allowing ad groups to specify a content resume offset
and making sure that the content start position after the ad group uses this offset.
PiperOrigin-RevId: 373393807
NAT will block off incoming UDP connection because the router has no knowledge
of the necessary port mapping (the mapping is never set up because UDP is
connectionless).
The end result is, the UDP socket to receive RTP data will timeout. After the
`SocketTimeoutException` is caught, the following takes place to try streaming
with TCP (or, RTP over RTSP).
- `RtspClient` sends TEARDOWN to tear down the current session.
- `RtspClient` re-connect to the RTSP server.
- `RtspMediaPeriod` cancels all loading `RtpDataLoadables` (that are using UDP)
- `RtspMediaPeriod` constructs new `RtpDataLoadables` that use
`TransferRtpDataChannel`, and starts loading.
- Once the `RtpDataLoadables` are up and running, we are ready to receive.
`RtspClient` sends the SETUP requests.
- The rest of the flow is unchanged.
#minor-release
PiperOrigin-RevId: 373310774
The player already supports changing durations of periods and ads.
The only thing not yet supported is a change in ad break positions
which changes the duration of clipped content ending in an ad break.
Adding support for this requires updating the end position in
MediaPeriodInfo and changing the clip end position of the respective
ClippingMediaPeriod.
Issue: #5067
PiperOrigin-RevId: 373139724
RTSP interleaving enables RTP packets to be sent using RTSP's TCP connection.
The interleaving RTSP messages contain binary data only and always start with a
'$'. Normal RTSP messages contain line breaks (CRLFs) that indicate complete
lines.
#minor-release
PiperOrigin-RevId: 372990181
The method to handle Timeline updates currently uses
isAd() || isPlaceholder()
to trigger two things:
1. Using the existing requested content position as the content
position.
2. Re-resolving the content position from window to period in case
it changed since the last update.
The condition is correct for case (1) because ads must use the content
position (and not the position in the ad) and a placeholder period must
keep using the requested content position as well until the media
information is no longer a placeholder.
However, case (2) only needs to be done if the content position is
C.TIME_UNSET (to start at the default position) OR if the period is
still a placeholder and we want to re-resolve the position.
The case where re-resolution shouldn't be done is for ads with a non-
placeholder period and a concrete content position. This likely only
affects ads in live stream where the content position is currently
moving with the live stream instead of staying where it is.
PiperOrigin-RevId: 372929439
- Don't deprecate methods not deprecated in the base class and that
could one day be useful.
- Better document deprecation of other methods.
#minor-release
PiperOrigin-RevId: 372919080
The existing code results in flaky tests, where sometimes the write
fails (with "EPIPE (broken pipe)") and the exception propagates out
and causes the test to never complete and time out.
Swallowing the exception resolves this flakiness.
#minor-release
PiperOrigin-RevId: 372909415
First intention to support parsing MPEG-H 3D Audio in ExoPlayer is to
take advantage of parsing capability from MediaParser API in AOSP.
Just with this change ExoPlayer does't support decoding MPEG-H 3D Audio
but can support decoding either by adding decoder with an extension or
by using Android OS which has decoder capability with MediaCodec API.
It was originally introduced because it was guaranteed to be non-null
unlike the inherited field. But ExoPlaybackException.cause has been
nullable for some time, so there's no gain in not using the inherited
field.
PiperOrigin-RevId: 372329740
Also make future similar issues less likely by adding isPlaceholder
to the set method of Period (in case forwarding Timeline
implementations use this instead of just updating values selectively)
#minor-release
PiperOrigin-RevId: 372138523
Issues have been identified around
offload gapless track transitions blocking
the track timestamp.
Until those issues are root caused, this settings
allows to disable gapless offload completely.
PiperOrigin-RevId: 372081545
In RtpDataLoadable.load, the second UDP data source is opened on the port we
specify. If the port is already in use, a BindException is thrown.
#minor-release
PiperOrigin-RevId: 371319522
All `add*Listener` and `add*Output` methods are
deprecated in favor of `addListener`.
As for the class themselves `VideoListener` and
`AudioListener` are not used internaly by ExoPlayer,
`VideoRendererEventListener`
and `AudioRendererEventListener` are use in their
place.
As a result `VideoListener` and `AudioListener`
can be deprecated in favor `Listener`.
On the other hand `TextOutput` and `MedataOutput`
are used both in the player interface and internally in
renderers.
This means that those class can't be deprecated.
There usage in the public interface are indirectly
deprecated as their is no way to use them without
using the deprecated `add*Output`.
Thus it's not an issue that the class themselves are
not deprecated.
#minor-release
PiperOrigin-RevId: 371318268
