The exception fires when intent resolution fails to find a service which declares an appropriate intent-filter. The existing message is confusing; it's trying to say that the service couldn't be found but the double negative renders it incorrect.
#cleanup
#minor-release
PiperOrigin-RevId: 472736740
(cherry picked from commit 15d3d74e16)
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (2 times)
* This catch block catches an exception and re-throws another, but swallows the caught exception rather than setting it as a cause. This can make debugging harder.
(see http://go/bugpattern/UnusedException)
* This comment contains Javadoc or HTML tags, but isn't started with a double asterisk (/**); is it meant to be Javadoc?
(see http://go/bugpattern/AlmostJavadoc)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 472255768
(cherry picked from commit 3a2e0d3717)
The assertion asserts against a `Period` and an `AdPlaybackState` which actually
asserts against a resolved ad which is what `ExoPlayerImplInternal` does later and
what gives us a `SEEK_ADJUSTMENT`. However, this assertion is not required at the
moment of masking, because we are sure that the resolved seek results in a content
period and never an ad period.
#minor-release
Issue: androidx/media#122
PiperOrigin-RevId: 471827072
(cherry picked from commit 73f86682e9)
Native multidex can only be used for binaries with minSdkVersion of 21 or higher, but minSdkVersion was specified to 16.
PiperOrigin-RevId: 470003836
(cherry picked from commit 5b3f320230)
We create an empty CueGroup in many places as default or
where none is needed. Instead, we can define a constant
for this purpose and reuse it.
PiperOrigin-RevId: 467944841
(cherry picked from commit 59895646e0)
When the player finishes playback and reaches the STATE_ENDED,
the notification remains visible with a pause button and the
service is kept in the foreground. This is a bug.
With this change, when the player reaches the STATE_ENDED, the
service is stopped from the foreground and a notification is shown
with a play button. If the play icon is tapped, the player will restart
playback of the last played item. Playing the last played item again
is the existing behavior when play/pause commands are received from
the legacy MediaSession (e.g. BT headset buttons).
#minor-release
Issue: google/ExoPlayer#112
PiperOrigin-RevId: 467231509
(cherry picked from commit 7a7e1eb23b)
Once a controller bound to a MediaSessionService unbinds, this service
may be destroyed immediately if this was the last bound controller and
the service isn't started in the foreground.
At the time of releasing the controller, there may still be pending
commands that need to be handled by the session service. These commands
may cause the session service to post a foreground notification to
keep it alive. So to avoid the destruction of the service while these
commands are still handled, we need to keep the controller bound.
We also add a timeout in case the session tasks are never completed
by the session implementation. In case the controller is destroyed,
the unbinding happens automatically by the system.
PiperOrigin-RevId: 463802220
(cherry picked from commit ac42b593cc)
The DefaultMediaNotificationProvider caches the last loaded artwork
bitmap so that the bitmap isn't loaded again when the notification is
updated, e.g., the player is transiting from playing to paused. However,
loading bitmap requests for bitmaps that are already being loaded are
not suppressed. For example, if the notification is updated while the
artwork is still downloading, the same artwork might be downloaded
multiple times.
This change suppresses a bitmap load request if the same artwork is
still being loaded, to avoid additional artwork downloads.
#minor-release
PiperOrigin-RevId: 462572221
(cherry picked from commit dd2c16bc45)
It's always safe to ignore the result of these methods, because the
caller already has a reference to the returned value.
PiperOrigin-RevId: 462388947
(cherry picked from commit 2deb435625)
We currently clear all pending messages, including the one that flushes
pending commands to the MediaSession. To ensure all commands that have
been called before controller.release() are still sent, we can manually
trigger the flush message from the release call.
Related to handling the final flush because disconnecting the controller,
MediaSessionStub didn't post the removal of the controller to the
session thread, creating a race condition between removing the controller
and actually handling the flush.
Issue: androidx/media#99
PiperOrigin-RevId: 462342860
(cherry picked from commit ee209690cb)
These constructors are currently very intertwined, passing `this`
references from the constructor of one to the constructor of another
before the first constructor is complete (and so the `this` reference
isn't really valid yet).
This change uses checker framework `@UnderInitialization` and
`@NotOnlyInitialized` annotations to make it more clear that the
references are not available yet. For the one 'direct' access needed
in the second constructor (calling `getApplicationLooper()`) we now
pass the `applicationLooper` directly alongside (to avoid needing to
dereference the reference 'too early').
This change also ensures that where a class hierarchy has a
'dependent' class hierarchy, the 'subclass' instance is always used
(by both subclass and superclass) without casting or manually hiding
the superclass field, by defining an overridable `getFoo()` method
instead and always using it.
#minor-release
PiperOrigin-RevId: 462335043
(cherry picked from commit 287c757944)
"seq" is not a well-defined abbreviation and the value is
also an integer, so sequenceNumber is better than just sequence.
PiperOrigin-RevId: 462129581
(cherry picked from commit 4a4a74edff)
Add a Builder to constructor DefaultMediaNotificationProvider. The
Builder can also set the provider's:
- notification ID
- notification channel ID
- notification channel name
The change adds an API for apps to set the small icon in notifications.
#minor-release
Issue: androidx/media#104
PiperOrigin-RevId: 462111536
(cherry picked from commit 436ff6d86a)
Some commands are run asynchronously and subsequent commands need
to wait until the previous one finished. This can be supported
by returning a Future for each command and using the existing
command execution logic to wait for each Future to complete.
As some MediaSessionStub code is now executed delayed to when it
was originally created, we also need to check if the session is
not released before triggering any actions or sending result codes.
Issue: androidx/media#85
PiperOrigin-RevId: 462101136
(cherry picked from commit 7cb7636ed9)
The commands currently use a task and a postTask that are chained
together manually. In some cases, e.g. when adding MediaItems,
the postTask is already a chain of commands in itself.
To allow using the entire command handling as a single task
(for simplified queueing), we can change the implementation to
always create a single task. If multiple subtasks need to be
chained together, we can do that by wrapping the method calls.
In case a task is asynchronous, we can also use Futures to
chain them together.
Overall, this is just a refactoring and changes no logic.
Issue: androidx/media#85
PiperOrigin-RevId: 462085724
(cherry picked from commit 45f1f5b378)
Some commands may be asynchronous and subsequent commands need to
wait for them to complete before running. This change updates the
queue to use (and listen to) Futures instead of calling Runnables
directly. The commands are currently still added as Runanbles
though, so this change is a no-op.
Also moves the permission check in MediaSessionImpl to before
queueing the command because the permission should be check at
the time of calling the method.
When executing the comamnds in the queue, we need to be careful
to avoid recursion in the same thread (which happens when both
the Future is immediate and running on the correct thread already).
To avoid recursion, we detect this case and loop the commands
instead.
Issue: androidx/media#85
PiperOrigin-RevId: 461827264
(cherry picked from commit dee80788e4)
After this change the current tracks are sent to the controller as part of
`PlayerInfo` and call `Listener.onTracksChanged()` in case of a change in tracks.
PiperOrigin-RevId: 461578695
(cherry picked from commit 9a895cd18f)
`TextRenderer` is updated to output `CueGroup`, which contains the presentation time of the cues, in microseconds.
PiperOrigin-RevId: 456531399
(cherry picked from commit 74d61bbffb)
This code path is now completely redundant as the same effect can be
achieved by using player.setMediaItem.
PiperOrigin-RevId: 455115567
(cherry picked from commit 21d4e85817)
These calls were not implemented so far as they require a mix of
initial prepareFrom/playFrom calls and addQueueItem. We can also
support clients without queue handling to set single MediaItems.
To make the calls consistent and predictable in the session,
we need to ensure that none of the play/pause/addQueueItem/
removeQueueItem/prepare/playFromXYZ/prepareFromXYZ are called
before the controller is prepared and has media.
#minor-release
PiperOrigin-RevId: 455110246
(cherry picked from commit b475f1f2da)
The service handles three different types of `Intents`. Custom command and media
command Intents created by the library and media button event Intents from other
sources.
Media commands from the library as well as from external sources have the action
set to `android.intent.action.MEDIA_BUTTON`. If the data URI is set and can be
used to identify a session then it is a library Intent. If the Intent is coming
from an external KeyEvent, the service implementation is asked which session to use
by calling `onGetSession(controllerInfo)` with the controller info being an
anonymous legacy controller info.
Intents representing a custom command are always coming from the library and hence
always have a data URI.
Issue: androidx/media#82
PiperOrigin-RevId: 453932972
(cherry picked from commit 8b592fc77a)
Some Player implementations have no playlist capability but can still
set a MediaItem for playback. Examples are a MediaController connected
to a legacy MediaSession, ExoPlayer up to 2.12 or MediaPlayer.
To indicate this capability, we need an allowed command in addition
to COMMAND_CHANGE_MEDIA_ITEMS that just allows to set a single item
that replaces everything that is currently played.
#minor-release
PiperOrigin-RevId: 453879626
(cherry picked from commit 5333c67d08)
Use Collections.synchronizedSet() instead of creating a set from a
ConcurrentHashMap because ConcurrentHashMap has a bug in APIs 21/22
that can result in lost updates.
PiperOrigin-RevId: 453696565
(cherry picked from commit d506c709c9)
These legacy callbacks are currently forwarded to onSetMediaUri which
will be removed in the future.
Also make sure to only call player.prepare/play after the items have
been set.
The calls to onAddQueueItem are also forwarded to onAddMediaItems to
actually allow a session to resolve these items to playable media, which
wasn't possible so far.
PiperOrigin-RevId: 453625204
(cherry picked from commit bd126ec5c5)
This provides an (unstable) API for apps to broadcast session extras
Bundle to all connected controllers and set the extras in the legacy
session.
Similar to the custom layout, the extras Bundle is not part of the
Media3 session state. This means that when a Media3 controller
connects to the session after the broadcast, the extras needs to be
sent to that controller in `MediaSession.Callback.onPostConnect(MediaSession session, ControllerInfo controller)`.
PiperOrigin-RevId: 451871731
This value only existed to allow setting media URLs from external sources
(e.g. in a MediaController) so that a player can start playing this item.
Now that we have MediaItem.RequestMetadata.mediaUrl we can remove this value
from MediaMetadata because it's request metadata, not media metadata.
PiperOrigin-RevId: 451857413
The MediaItemFiller is not flexible enough for most realworld usages
because:
- it doesn't allow asynchronous resolution of MediaItems (e.g. to
look up URIs from a database)
- it doesn't allow to batch updates for multiple items or do more
advanced customizations (e.g. expanding a mediaId representing
a playlist to multiple items).
Both issues can be solved by passing in a list of items and
returning a ListenableFuture. The callback itself can also move
into MediaSession.Callback for consistency with the other
callbacks.
PiperOrigin-RevId: 451857319
In some cases it's helpful to have access to the session
(e.g. to get the PlayerWrapper) from within the PostSessionTask
implementations. This change forwards the existing sessionImpl
instance to all these callbacks.
PiperOrigin-RevId: 451857191
