This is confusing, since the effect is used not only when applying an effect, but also when preparing an effect (ex. in a texture processor's constructor), so we should also mention that case.
PiperOrigin-RevId: 504843598
Tested adding 3, 15,16 different overlays in a single OverlayTextureProcessor. The program errored out when 16 overlays were added.
PiperOrigin-RevId: 504810157
`FrameProcessorManager` now reports it's not ready when the output surface is set but not the output resolution. `FrameProcessorManager` allows playback without an output surface, like with ExoPlayer.
PiperOrigin-RevId: 504626088
This is necessary in order to move HDR to SDR tone-mapping tests to transformer/mh,
and to move the test runner to androidx.media3.test-utils, which should not have to
include androidx.media3.effects.
PiperOrigin-RevId: 504607929
The commands are partly checked already before enabling
features or calling player methods, but the checks were
still missing in many places.
#minor-release
PiperOrigin-RevId: 504589888
Also add a Builder to EditedMediaItem to avoid having a constructor with
many optional parameters, or a chain of constructors.
PiperOrigin-RevId: 504588544
This information may be needed for applications to create their own OpenGL contexts
and textures passed into or interacting with Effects.
PiperOrigin-RevId: 504342258
ImaUtil calls VideoProgressUpdate.equals() which is annotated as hidden,
which causes lint errors with gradle.
#minor-release
PiperOrigin-RevId: 504306210
Created unified MediaUtils method to handle various logic for calling Player.setMediaItems from MediaSessionStub and MediaSessionLegacyStub
PiperOrigin-RevId: 504271877
Based on experimentation, when CameraX is producing input for frame processor the buffer size is not being set to match the camera capture resolution, so the output has lower resolution than expected. Expose the default buffer size setter on `SurfaceTexture` to allow apps to process frames at full resolution for use cases like this one where the producer doesn't override the default buffer size.
PiperOrigin-RevId: 504022107
Transformer convention has been to avoid splitting into packages unless
necessary.
See https://jlbp.dev/JLBP-2: "Prefer fewer packages over more packages
to avoid unnecessarily publicizing internal details, since any
dependency across package boundaries needs to be public.
PiperOrigin-RevId: 503463294
Resampling as a term is overloaded, however it was raised as a
confusing term in a meeting recently, as the 1P team initially thought
this would change the sample rate. The naming of this `AudioProcessor`
now matches `ToInt16PcmAudioProcessor`.
PiperOrigin-RevId: 503441019
Added onSetMediaItems callback listener to allow the session to modify/set MediaItem list, starting index and position before call to Player.setMediaItem(s).
Added conditional check in MediaSessionStub.setMediaItem methods to only call player.setMediaItem rather than setMediaItems if player does not support COMMAND_CHANGE_MEDIA_ITEMS
PiperOrigin-RevId: 503427927
This makes it implicitly clear that if the value of a getter changes due
to a change in command availability then the listener will be invoked,
without needing to explicitly document every command on every listener
method.
#minor-release
PiperOrigin-RevId: 503178383
We stop estimating new position when pausing until we
receive a new position from the player. However, this
means that we will continue to return a possible stale
previous position. Updating the current position before
pausing solves this issue.
PiperOrigin-RevId: 503153982
We currently only document it for the getCurrentMediaItem(), but
the command was always meant to cover all information about the
current media item and the position therein.
To correctly hide information for controllers, we need to filter
the Timeline when bundling the PlayerInfo class if only this
command is available.
PiperOrigin-RevId: 503098124
When bundling PlayerInfo, we need to remove information if the
controller is not allowed to access it. This was only partially
done at the moment.
PiperOrigin-RevId: 502852798
When bundling PlayerInfo, we remove data when the controller is not
allowed to access this data via getters. We also remove data for
performance reasons. In the toBundle() method, it's currently hard to
make the connection between allowed commands and filtering, because
the values are checked at a different place. This can be made more
readable by forwarding the applicable Commands directly.
The only functional fix is to filter the Timeline when sending the
first PlayerInfo after a connecting a controller if the command to
get the Timeline is not available. This also allows us to remove a
path to filter MediaItems from Timelines as it isn't used.
PiperOrigin-RevId: 502607391
This is an AssetLoader that wraps a sequence of AssetLoaders. It will
be used for constrained multi-asset.
This class can currently only concatenate media items with the exact
same format.
PiperOrigin-RevId: 502525796
Also remove usages of TransformationRequest convenience methods
(setScale, setRotationDegrees and setResolution).
Some usages of setResolution can't be removed yet because they are used
for fallback.
PiperOrigin-RevId: 502415748
This CL includes following changes:
1. Remove GCA related terms/links from java docs and comments.
2. Make class final where ever possible.
3. Append /* package */ for default classes.
4. Change java docs to recommended format.
5. Replace term "packet" with "sample" to avoid confusion.
6. Correct TODO format.
7. Delete MediaFormatUtil.java from muxer module and add its methods into MediaFormatUtil.java in common module.
Note: The java doc on various boxes has the limited description which was already present. In future I am planning to add proper small description for each box (from MP4 spec).
Not included in this CL:
1. Order of element correction as it will show lot of changes and might create confusion with other minor changes.
2. Correction in test cases (Only some renaming).
PiperOrigin-RevId: 502414139
This is needed for constrained multi-asset to shift the timestamps of
the media items that are not the first in the sequence.
PiperOrigin-RevId: 502409923
Also, omit the "actual" label from output files, as this boilerplate isn't necessary
(it doesn't disambiguate between any other saved filename like "expected").
PiperOrigin-RevId: 502378188
This should make debugging much easier as values will be more human-readable.
Before this CL, one needed to reference MediaFormatUtil to check the
colorSpace/colorTransfer/colorRange values and make sure values were as
expected.
PiperOrigin-RevId: 502367147
The method to dispatch actions in MediaControllerImplBase takes
a Player.Command, but the value is only used to check if we
are setting a surface and need to handle the special blocking
call. This can be cleaned up by removing the parameter and calling
a dedicated blocking method where needed. This also ensures we
have to mention the relevant Player.Command only once in each
method.
PiperOrigin-RevId: 502341862
Makes GlEffectsFrameProcessorPixelTest slightly more modular in preparation for
copying this into transformer/mh.
Refactoring change. No functional change intended.
PiperOrigin-RevId: 501902223
Frame cache compensates for the fluctuation in frame processing times.
Imagine a frame takes 10ms to process, and the interval between two frames is
33ms. The third frame took 40ms to process.
If we don't have frame cache:
- Process frame 1, ready after 10ms, starts playback, now t=0 ms
- Start processing frame 2, ready at t=10ms,
- Release frame 2 at t=33ms
- We start processing the third frame at t=33ms
- The third frame is due presentation at t=66ms
- But frame 3 is available at t=73ms, late
If we have a frame cache of say 3 frams,
- Process frame 1, ready after 10ms, starts playback, now t=0 ms
- Start processing frame 2, ready at t=10ms
- Start processing frame 3, ready at t=50ms
- Release frame 2 at t=33ms
- Start frame 4, ready at t=60ms
- Frame 3 is due presentation at t=66ms
- Frame 3 isn't late
PiperOrigin-RevId: 501869948
Previously, after calling MCVR.setOutput() with null, `frameProcessorManager`'s output surface is cleared. What was unexpected is `ExoPlayerInternal` notifies a zero output resolution after clearing the output surface. This zero resolution causes FrameProcessor to fail.
PiperOrigin-RevId: 501861993
Move BitmapTestUtil from media3.effect to media3.test.utils.
This allows this class to be accessed from both transformer and effect tests.
Refactoring change. No functional change intended.
PiperOrigin-RevId: 501837130
This fix applies to Android 12 and above.
In this fix, the `MediaSessionService` will try to start in the foreground before the session playback resumes, if ForegroundServiceStartNotAllowedException is thrown, then the app can handle the exception with their customized implementation of MediaSessionService.Listener.onForegroundServiceStartNotAllowedException. If no exception thrown, the a media notification corresponding to paused state will be sent as the consequence of successfully starting in the foreground. And when the player actually resumes, another media notification corresponding to playing state will be sent.
PiperOrigin-RevId: 501803930
This class may be removed soon, but in the meantime clarify this method's
javadoc summary fragment to make it marginally clearer that this only affects
the "displayed" height instead of the "encoded" height.
PiperOrigin-RevId: 501582219
Small refactoring change to simplify the logic a tiny bit by removing one
unnecessary variable. No functional change intended.
PiperOrigin-RevId: 501566533
Starting with Android 13 (API 33) an app needs to request the
permission to post notifications or notifications are suppressed.
This change documents this in the class level JavaDoc of the
`DownloadService`.
Issue: google/ExoPlayer#10884
PiperOrigin-RevId: 501346908
The migration strategy is to deprecate `androidx.media3.session.BitmapLoader` and copy the file into common since BitmapLoader is a public interface that apps could be relying on.
PiperOrigin-RevId: 501266521
It makes more sense to have it in the AssetLoader now that decoding is
done there, particularly as the decoder factory should rarely be
customized.
Also remove the setter from the AssetLoader.Factory because it's
uncommon to have setters in a factory.
PiperOrigin-RevId: 501244974
For TV devices the skip button needs to have the focus to be accessible with
the remote control. This property makes this configurable while being set to
true by default.
PiperOrigin-RevId: 501077608
The FrameProcessor is created on the GL thread, but:
- setInputFrameInfo() is currently called from the playback thread.
- release() is currently called from the transformer internal thread.
PiperOrigin-RevId: 501035719
When audio processors are enabled during tunneling, they must produce
output immediately, ensuring that the timestamps of the output samples
correspond to the input and that no additional samples are produced.
This requirement is documented in the Javadoc of DefaultAudioSink.
However, this alone doesn't guarantee all buffers are immediately
written to the AudioTrack, because the AudioTrack writes are
non-blocking and may need multiple attempts.
When draining the audio sink at the end of the stream, we currently
fail in this situation because we assert that the timestamp must be
set (=the drain operation is a no-op). But this may not be true when
the previous non-blocking write wasn't fully handled. We can fix this
by saving the last timestamp and reusing it during draining.
Issue: google/ExoPlayer#10847
PiperOrigin-RevId: 500943891
Initialising the fields as Integer and then getting a String on compute time is slow. Instead we directly initialise these fields as String. Improves the time taken in bundling PlayerInfo further to less than 200ms from ~300ms.
Also modified a test to improve productive coverage.
PiperOrigin-RevId: 500003935
This brings together the multiple details about a muxer track, and
reduces the need for additional variables and more complicated track
tracking.
PiperOrigin-RevId: 499872145
Improves the time taken to construct playerInfo from its bundle from ~400 ms to ~300 ms.
Also made `Timeline.Window.toBundle(boolean excludeMediaItem)` public as it was required to assert a condition in tests.
PiperOrigin-RevId: 499512353
The old names are not really correct anymore because:
- The Audio/VideoTranscodingSamplePipelines do not decode anymore.
- The pipelines now mux the encoded data.
PiperOrigin-RevId: 499498446
Whilst testing fallback functionality, I found that we were
aggressively reducing the resolution if it was not supported. A quick
test found that we could reduce by a much smaller increments.
Performance wise it appears these checks are incredibly quick.
The code for checking supported sizes was duplicated, with one case
having a bug because of this duplication (2/3 case). This CL abstracts
this into a loop.
PiperOrigin-RevId: 499497646
Added another check in each of these tests to make sure we don't add keys to bundle for fields with default values.
Also fixed comments of similar changes in `AdPlaybackStateTest` and `MediaMetadataTest`.
PiperOrigin-RevId: 499463581
