The output info for a new stream is marked pending until the last
sample of the previous stream has been processed. However, this fails
if the previous stream has already been fully processed. We need to
detect this case explicitly to avoid signalling the output change one
sample too late.
#minor-release
PiperOrigin-RevId: 512572854
(cherry picked from commit 39935d7f12)
This test became flaky after cbb6878f9f because some of the
unrealistic frame times ended up on the same release time.
Using realistic numbers avoids the flakiness.
PiperOrigin-RevId: 512566469
(cherry picked from commit 13700e0aec)
Protected system broadcasts should not specify the export flag.
Marking them as NOT_EXPORTED breaks sticky broadcasts in some
cases.
Issue: google/ExoPlayer#10970
#minor-release
PiperOrigin-RevId: 512020154
(cherry picked from commit 34b9824201)
The current logic uses manual array operations to keep track of pending
changes. Modernize this code by using an ArrayDeque and a data class.
This also allows to extend the output stream information in the future.
This also fixes a bug where a position reset accidentally assigns a pending
stream offset instead of keeping the current one.
PiperOrigin-RevId: 511787571
(cherry picked from commit 4e0babdcd1)
When rendering frames at a rate higher than the screen refresh rate,
e.g. playing at 8x, the player is releasing multiple frames at the same
release time (nanos) which are then dropped by the platform. The output
buffers are available later and as a result MediaCodec cannot keep up
decoding fast enough.
This change skips releasing multiple video frames on the same vsync
period and proactivelly drops the frame. The frame is counted as skipped
rather than dropped to differentiate with frames dropped due to slow
decoding.
PiperOrigin-RevId: 510964976
(cherry picked from commit cbb6878f9f)
This call may cause performance overhead in some situations,
for example if the AudioTrack needs to query an offload DSP
for the current position. We don't need to check this multiple
times per doSomeWork iteration as the value is unlikely to
change in any meaningful way.
PiperOrigin-RevId: 510957116
(cherry picked from commit 829b49d724)
In parsing Describe RTSP response messages, IllegalArgumentExceptions are thrown for invalid parameters and values. These exceptions were not caught and crashed the Playback thread. Now these exceptions will be caught and their errors forwarded to the proper error handling listeners.
#minor-release
Issue: google/ExoPlayer#10971
PiperOrigin-RevId: 509207881
(cherry picked from commit 711fa44d56)
The AsynchronousMediaCodecAdapter's queuing thread stores any exceptions
raised by MediaCodec and re-throws them on the next call to
queueInputBuffer()/queueSecureInputBuffer(). However, if MediaCodec
raises and error while queueing, it goes into a failed state and does
not announce available input buffers. If there is no input available
input buffer, the MediaCodecRenderer will never call
queueInputBuffer()/queueSecureInputBuffer(), hence playback is stalled.
This change surfaces the queueing error through the adapter's dequeueing
methods.
PiperOrigin-RevId: 508637346
(cherry picked from commit a5f4651d55)
`TrackSelectorResult.rendererConfigurations` can contain null elements:
> A null entry indicates the corresponding renderer should be disabled.
This wasn't caught by the nullness checker because `ExoPlayerImpl` is
currently excluded from analysis.
#minor-release
Issue: google/ExoPlayer#10977
PiperOrigin-RevId: 508619169
(cherry picked from commit 5e3cd7a3c3)
The AudioTrackPositionTracker needs to correct positions by
the speed set on the AudioTrack itself whenever it makes
estimations based on real-time (=the real-time playout
duration is not equal to the media duration played).
This happens for the main playback path already, but not for
the mode in which the position is estimated from the playback
head position and also not in the phase after the track has
been stopped. Both cases are not very noticeable during
normal playback, but become relevant when playing in offload
mode.
PiperOrigin-RevId: 507736408
(cherry picked from commit 4ede931c2a)
In MediaCodecUtil, use Format.colorInfo, besides the codec string,
to accurately map to a 10bit HEVC profile.
PiperOrigin-RevId: 507500071
(cherry picked from commit 80dbaca0e5)
MediaCodecRenderer currently has two independent paths to trigger
events at stream changes:
1. Detection of the last output buffer of the old stream to trigger
onProcessedStreamChange and setting the new output stream offset.
2. Detection of the first input buffer of the new stream to trigger
onOutputFormatChanged.
Both events are identical for most media. However, there are two
problematic cases:
A. (1) happens after (2). This may happen if the declared media
duration is shorter than the actual last sample timestamp.
B. (2) is too late and there are output samples between (1) and (2).
This can happen if the new media outputs samples with a timestamp
less than the first input timestamp.
This can be made more robust by:
- Keeping a separate formatQueue for each stream to avoid case A.
- Force outputting the first format after a stream change to
avoid case B.
Issue: google/ExoPlayer#8594
PiperOrigin-RevId: 512586838
(cherry picked from commit 3970343846)
Some devices were reported to have wrong PerformancePoint sets
that cause 60 fps to be marked as unsupported even though they
are supported.
Issue: google/ExoPlayer#10898
PiperOrigin-RevId: 512580395
(cherry picked from commit d0cbf0fce8)
The output info for a new stream is marked pending until the last
sample of the previous stream has been processed. However, this fails
if the previous stream has already been fully processed. We need to
detect this case explicitly to avoid signalling the output change one
sample too late.
#minor-release
PiperOrigin-RevId: 512572854
(cherry picked from commit 7ffcc6f7ea)
This test became flaky after ab7e84fb34 because some of the
unrealistic frame times ended up on the same release time.
Using realistic numbers avoids the flakiness.
PiperOrigin-RevId: 512566469
(cherry picked from commit 0c8ce183fe)
Protected system broadcasts should not specify the export flag.
Marking them as NOT_EXPORTED breaks sticky broadcasts in some
cases.
Issue: google/ExoPlayer#10970
PiperOrigin-RevId: 512020154
(cherry picked from commit 93e117928c)
The current logic uses manual array operations to keep track of pending
changes. Modernize this code by using an ArrayDeque and a data class.
This also allows to extend the output stream information in the future.
This also fixes a bug where a position reset accidentally assigns a pending
stream offset instead of keeping the current one.
PiperOrigin-RevId: 511787571
(cherry picked from commit f042012495)
When rendering frames at a rate higher than the screen refresh rate,
e.g. playing at 8x, the player is releasing multiple frames at the same
release time (nanos) which are then dropped by the platform. The output
buffers are available later and as a result MediaCodec cannot keep up
decoding fast enough.
This change skips releasing multiple video frames on the same vsync
period and proactivelly drops the frame. The frame is counted as skipped
rather than dropped to differentiate with frames dropped due to slow
decoding.
PiperOrigin-RevId: 510964976
(cherry picked from commit ab7e84fb34)
This call may cause performance overhead in some situations,
for example if the AudioTrack needs to query an offload DSP
for the current position. We don't need to check this multiple
times per doSomeWork iteration as the value is unlikely to
change in any meaningful way.
PiperOrigin-RevId: 510957116
(cherry picked from commit 9eccf09165)
The current javadoc refers to the SessionCallback#onConnected, which doesn't exist.
PiperOrigin-RevId: 510261965
(cherry picked from commit fc642eb45f)
In parsing Describe RTSP response messages, IllegalArgumentExceptions are thrown for invalid parameters and values. These exceptions were not caught and crashed the Playback thread. Now these exceptions will be caught and their errors forwarded to the proper error handling listeners.
Issue: google/ExoPlayer#10971
PiperOrigin-RevId: 509207881
(cherry picked from commit a8c87453db)
The AsynchronousMediaCodecAdapter's queuing thread stores any exceptions
raised by MediaCodec and re-throws them on the next call to
queueInputBuffer()/queueSecureInputBuffer(). However, if MediaCodec
raises and error while queueing, it goes into a failed state and does
not announce available input buffers. If there is no input available
input buffer, the MediaCodecRenderer will never call
queueInputBuffer()/queueSecureInputBuffer(), hence playback is stalled.
This change surfaces the queueing error through the adapter's dequeueing
methods.
PiperOrigin-RevId: 508637346
(cherry picked from commit 706431059c)
`TrackSelectorResult.rendererConfigurations` can contain null elements:
> A null entry indicates the corresponding renderer should be disabled.
This wasn't caught by the nullness checker because `ExoPlayerImpl` is
currently excluded from analysis.
#minor-release
Issue: google/ExoPlayer#10977
PiperOrigin-RevId: 508619169
(cherry picked from commit a6dfcf7799)
The AudioTrackPositionTracker needs to correct positions by
the speed set on the AudioTrack itself whenever it makes
estimations based on real-time (=the real-time playout
duration is not equal to the media duration played).
This happens for the main playback path already, but not for
the mode in which the position is estimated from the playback
head position and also not in the phase after the track has
been stopped. Both cases are not very noticeable during
normal playback, but become relevant when playing in offload
mode.
PiperOrigin-RevId: 507736408
(cherry picked from commit 01d7bc7279)
In MediaCodecUtil, use Format.colorInfo, besides the codec string,
to accurately map to a 10bit HEVC profile.
PiperOrigin-RevId: 507500071
(cherry picked from commit a50ea94525)
Following test cases are added:
1. Mux H264 video
2. Mux H265 video
3. Mux HDR video
Each test case performs following actions:
1. Extract track and samples from input Mp4 using MediaExtractor.
2. Feed those samples into Mp4 muxer.
3. Use extractor to extract the samples from muxed file and create dump file.
PiperOrigin-RevId: 512589069
MediaCodecRenderer currently has two independent paths to trigger
events at stream changes:
1. Detection of the last output buffer of the old stream to trigger
onProcessedStreamChange and setting the new output stream offset.
2. Detection of the first input buffer of the new stream to trigger
onOutputFormatChanged.
Both events are identical for most media. However, there are two
problematic cases:
A. (1) happens after (2). This may happen if the declared media
duration is shorter than the actual last sample timestamp.
B. (2) is too late and there are output samples between (1) and (2).
This can happen if the new media outputs samples with a timestamp
less than the first input timestamp.
This can be made more robust by:
- Keeping a separate formatQueue for each stream to avoid case A.
- Force outputting the first format after a stream change to
avoid case B.
Issue: google/ExoPlayer#8594
#minor-release
PiperOrigin-RevId: 512586838
Some devices were reported to have wrong PerformancePoint sets
that cause 60 fps to be marked as unsupported even though they
are supported.
Issue: google/ExoPlayer#10898
#minor-release
PiperOrigin-RevId: 512580395
Following test cases are added:
1. Mux H264 video
2. Mux H265 video
3. Mux HDR video
Each test case performs following actions:
1. Extract track and samples from input Mp4 using MediaExtractor.
2. Feed those samples into Mp4 muxer.
3. Use extractor to extract the samples from muxed file and create dump file.
PiperOrigin-RevId: 512589069
MediaCodecRenderer currently has two independent paths to trigger
events at stream changes:
1. Detection of the last output buffer of the old stream to trigger
onProcessedStreamChange and setting the new output stream offset.
2. Detection of the first input buffer of the new stream to trigger
onOutputFormatChanged.
Both events are identical for most media. However, there are two
problematic cases:
A. (1) happens after (2). This may happen if the declared media
duration is shorter than the actual last sample timestamp.
B. (2) is too late and there are output samples between (1) and (2).
This can happen if the new media outputs samples with a timestamp
less than the first input timestamp.
This can be made more robust by:
- Keeping a separate formatQueue for each stream to avoid case A.
- Force outputting the first format after a stream change to
avoid case B.
Issue: google/ExoPlayer#8594
#minor-release
PiperOrigin-RevId: 512586838
Some devices were reported to have wrong PerformancePoint sets
that cause 60 fps to be marked as unsupported even though they
are supported.
Issue: google/ExoPlayer#10898
#minor-release
PiperOrigin-RevId: 512580395
The output info for a new stream is marked pending until the last
sample of the previous stream has been processed. However, this fails
if the previous stream has already been fully processed. We need to
detect this case explicitly to avoid signalling the output change one
sample too late.
#minor-release
PiperOrigin-RevId: 512572854
The output info for a new stream is marked pending until the last
sample of the previous stream has been processed. However, this fails
if the previous stream has already been fully processed. We need to
detect this case explicitly to avoid signalling the output change one
sample too late.
#minor-release
PiperOrigin-RevId: 512572854
This test became flaky after ab7e84fb34 because some of the
unrealistic frame times ended up on the same release time.
Using realistic numbers avoids the flakiness.
PiperOrigin-RevId: 512566469
Uses the first mediaItem's format as the output format.
If there is `Presentation` supplied in the `Composition.effects`, add it as the
last effect of the first EditedMediaItem.
PiperOrigin-RevId: 512082659
