This ensures the DownloadService stays functional on Android 14
where defining this type is required. On Android 14 and above,
the app also needs to define the DATA_SYNC permission, which is
added to the demo app as well. In the future, this service type
will no longer be supported and DownloadService needs to be
rewritten with another background scheduling framework.
Issue: google/ExoPlayer#11239
PiperOrigin-RevId: 548994842
This was done because it was deemed correct to only start at timestamp
zero when the code was originally written. However, in case of
prerolling from a keyframe, many samples will get the same timestamp,
which is not correct and interferes with downstream logic
that deals with timestamps.
PiperOrigin-RevId: 548986160
Reading a discontinuity from a media period indicates that a position
reset is required. As part of this event, the media period may need
further loading (e.g in a MergingMediaPeriod where one stream reported
a discontinuity and the other need to reload from this position).
This currently fails if the media periods was already fully loaded and
we started loading further items in the playlist. As a result, playback
is stuck forever. We can fix this by detecting that further loading is
needed and resetting the loading period to the current one.
The existing MergingPlaylistPlaybackTest already covers this case
reliably, because it combines all the right preconditions (merging
source, clipping to get a discontinuity and a playlist).
PiperOrigin-RevId: 548735177
This is a step towards adding general support for overlapping
subtitles in these formats (and others), both muxed and sideloaded:
* Issue: google/ExoPlayer#10295
* Issue: google/ExoPlayer#4794
This change adds these files to the end-to-end playback tests too, but
the subtitle track is currently disabled because renderer-side subtitle
parsing causes flaky tests (due to an uncontrolled thread in
`SimpleSubtitleDecoder`). The subtitle track will be re-enabled in
a follow-up change when loading-side subtitle parsing is added (so the
tests will no longer be flaky). At this point the overlapping subtitles
**still** won't be supported end-to-end, but a second change will
resolve this will changes in `TextRenderer` - which will change the
end-to-end playback dumps to reflect the overlapping subtitles.
PiperOrigin-RevId: 548705032
The streams return end-of-input if they read no samples, but know that
they are fully buffered to at least the clipped end time. This helps to
detect the end of stream even if there are no new buffers after the end
of the clip (e.g. for sparse metadata tracks).
The race condition occurs because the buffered position is evaluated
after reading the sample. So between reading "no sample" and checking
the buffered position, the source may have loaded arbitrary amounts
of data. This may lead to a situation where the source has not read
all samples, reads NOTHING_READ (because the queue is empty) and then
immediately returns end-of-stream (because the buffered position
jumped forward), causing all remaining samples in the stream to be
skipped. This can fixed by moving the buffered position check to
before reading the sample, so that it never exceeds the buffered
position at the time of reading "no sample".
#minor-release
PiperOrigin-RevId: 548646464
Also re-use the `CuesWithTimingSubtitle` implementation (previously a
private class inside `DelegatingSubtitleDecoder`) in `ExoPlayerCuesDecoder`.
PiperOrigin-RevId: 548612040
It will act similarly to `SubtitleDecoderFactory`, but return parsers instead of decoders. In turn `SubtitleDecoderFactory.createDecoder()` cab wrap those parsers with `DelegatingSubtitleDecoder`.
PiperOrigin-RevId: 548528054
`PgsDecoder` which used to be `SimpleSubtitleDecoder` will now be called `PgsParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `PgsParser` instance.
PiperOrigin-RevId: 548520549
`DvbDecoder` which used to be `SimpleSubtitleDecoder` will now be called `DvbParser` and implement `SubtitleParser` interface. There was, however, already a `DvbParser`, used by `DvbDecoder` behind the scenes. Hence, the refactoring only requires the existing `DvbParser` to adhere to the new `SubtitleParser` interface.
For backwards compatibility, we will have the same functionality as `DvbDecoder` provided by `DelegatingSubtitleDecoder` backed-up by a new `DvbParser` instance, available from the `SubtitleDecoderFactory`.
PiperOrigin-RevId: 548155759
`Tx3gDecoder` which used to be `SimpleSubtitleDecoder` will now be called `Tx3gParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `Tx3gParser` instance.
PiperOrigin-RevId: 548144492
Add Ogg ID Header and Comment Header Pages to the Ogg encapsulated Opus for offload playback. This further matches the RFC 7845 spec and provides initialization data to decoders.
PiperOrigin-RevId: 548080222
These tests allow to verify the samples sent for decoding,
when decoders are reset, which samples are dropped as decode-only
for video and which samples are sent to the AudioTrack for playback.
The test exercises all combinations of merges where audio or video
is the primary track and where audio, video or both are clipped.
PiperOrigin-RevId: 548061254
These tests allow to verify the samples sent for decoding,
when decoders are reset, which samples are dropped as decode-only
for video and which samples are sent to the AudioTrack for playback.
The test exercises all combinations of clipping transitions for
sources that are either clipped at the start, the end, or both.
PiperOrigin-RevId: 547730824
When a renderer is pre-enabled (while another playback is still
ongoing), we pass mayRenderStartOfStream=false to Renderer.enable.
This ensures we don't show any first frames while the previous media
is still playing.
Currently, we never tell the renderer when we actually stop playing
the previous media so that it could render the start of the stream,
because we allow this as soon as the renderer is in STATE_STARTED and
we assume that we have to be in STATE_STARTED to make this stream
transition.
While this assumption is true, there are also cases where we can't
start the renderers because they are not ready yet and the video
renderer can't become ready because it didn't render its first frame.
This effectively blocks playback forever.
The most direct way of solving this, is to tell the renderer that
playback has transitioned and that it is now allowed to render the
start of the stream. This means it can never get blocked as described
above.
PiperOrigin-RevId: 547727347
`Mp4WebvttDecoder` which used to be `SimpleSubtitleDecoder` will now be called `Mp4WebvttParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `Mp4WebvttParser` instance.
PiperOrigin-RevId: 547248157
For sync-sample-only formats, we have an optimization to drop all buffers
with less than the start time when writing them to the queue.
For the same formats, if we set a new start time (=seek), we only seek
to the buffer at or before the start time. This means the first sample
in the queue is different depending on whether we seek to a start time
or set a start time and then write samples. This is inconsistent and
effectively means the first sample depends on a race condition between
the Loader thread (writing samples) and the playback thread (attempting
an initial seek in the already loaded samples).
The effect of this inconsistency is that we have to decode one sample
we don't need (and could have skipped) and that some tests become flaky
if the test setup runs into the mentioned race condition.
The fix is to change the SampleQueue seek method to also seek to
a sample at or after the specified time, to align the behavior to the
case where we write the same samples to an empty queue.
The change also clarifies the Javadoc of
MimeTypes.allSamplesAreSyncSamples to note that this should really only
return true if the samples have no "duration" that matters. Otherwise,
we could reasonably return true for most subtitle formats although it
would break subtitle display because we'd remove samples that start
before the seek time.
PiperOrigin-RevId: 547189941
Also parse the PCM encoding for lpcm in MP4, and update `MatroskaExtractor`
similarly.
Tested manually in the demo app using an MP4 with 24-bit big endian audio.
PiperOrigin-RevId: 546878505
Some adjustments to the test to make it more correct and prevent it
from becoming flaky:
- Use separate output dump files per test setup. Once we add more data
to these files, they are not guaranteed to be the same anymore.
- Use a seek position that is actually behind the midroll as described
in the test setup.
- Change ad insertion position to ensure the ad group duration doesn't
exceed the underlying media duration.
- Add a wait for isLoading to ensure the late insertion of an ad group
happens consistently at the same processing stage.
PiperOrigin-RevId: 546825183
This changes all MediaSources in our library to allow updates to
their MediaItems (if supported).
Issue: google/ExoPlayer#9978
Issue: androidx/media#33
PiperOrigin-RevId: 546808812
`SubripDecoder` which used to be `SimpleSubtitleDecoder` will now be called `SubripParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `SubripParser` instance.
PiperOrigin-RevId: 546538113
`SsaDecoder` which used to be `SimpleSubtitleDecoder` will now be called `SsaParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `SsaParser` instance.
PiperOrigin-RevId: 546336035
`DelegatingSubtitleDecoder` is a `SimpleSubtitleDecoder` that delegates to a `SubtitleParser` instance (e.g. future implementations like `WebvttParser`, `SubripParser`, `SsaParser`, `DvbParser` etc)
It will be in the `exoplayer` package, rather than `extractor` and only be used in the decoding flow which happens after SampleQueue (and to be deprecated). When this decoding flow is deprecated and removed, the class can be later deleted.
PiperOrigin-RevId: 546317528
This makes tests more realistic because the returned value matches
the rest of the simulated test time.
It also prevents test flakiness in (yet to be written) tests that
may not correctly advance the playback time in the position tracker.
PiperOrigin-RevId: 546011842
When selecting progressive and HLS tracks, we currently check if
we can either seek in the existing samples or are starting from the
beginning of the stream. In both cases, we don't need to reload the
stream and can continue reading.
Seeking to the beginning isn't side-effect free though because it
also sets the startTimeUs to zero. Whether a seek to the beginning
is successful also depends on whether we already loaded a sample or
not. This mean that the startTimeUs value is set (or not set) based
on the speed of the Loader thread even for the same input starting
from the beginning. This race condition means the actual samples
we write to the stream may differ if the stream has initial samples
with negative timestamps.
We can avoid this race condition by checking if the queue is empty
first, so that we only call seekTo if really needed.
PiperOrigin-RevId: 546010951
Robolectric writes warnings to the log output because the Surfaces
we create are not released and pollute the test environment. This
causes performance issues if tests are run repeatedly.
PiperOrigin-RevId: 545906757
We have the optimization to skip buffers if the release time is
exactly the same as the one for the previous buffer. This makes
sense under the assumption that these buffers get released to
a visible Surface and will be ignored anyway.
However, it's also helpful to provide a customization option to not
do this for cases where the outputting MediaCodecAdapter is not
directly talking to a visible Surface or for tests where we can't
fully control the vsync timing of the Surface and want to ensure
we output all samples that are meant to be shown.
PiperOrigin-RevId: 545906113
This makes tests more realistic because the returned value matches
the rest of the simulated test time.
It also prevents test flakiness in (yet to be written) tests that
may accidentally drop output buffers or calculate the wrong values.
PiperOrigin-RevId: 545690008
Upon track transition of offloaded playback of gapless tracks, the framework will reset the playback head position. The AudioTrackPositionTracker must be made to expect the reset and cache accumulated sum of rawPlaybackHeadPosition.
#minor-release
PiperOrigin-RevId: 545602979
This allows MediaSources to accept MediaItem updates after creation.
This CL adds the handling and plumbing logic in `ExoPlayerImpl`,
`ExoPlayerImplInternal`, `MediaSourceList` and `MaskingMediaSource`.
It also updates all forwarding/wrapping sources to forward these calls
to their wrapped instance.
The actual functionality is only added to `FakeMediaSource` instances in
tests so far.
PiperOrigin-RevId: 545450210
This plumbs a duration through `SampleQueue` which will make it easier
to handle transcoding muxed subtitles from e.g. SubRip to
`text/x-exoplayer-cues`.
This change is a no-op to the end-to-end behaviour of ExoPlayer because
currently we only support parsing sideloaded subtitles before
`SampleQueue`, and by adding the duration we don't affect the cues that
are ultimately output by `Player.Listener.onCues` (as shown by no change
to the golden files for `WebvttPlaybackTest` in this commit).
I considered making `CuesWithStartTimeAndDuration` implement
`Bundleable` (and deleting `CueEncoder/Decoder`) but decided against
it because we are deliberately not encoding `startTimeUs` (since that's
encoded as the sample time in `SampleQueue`). I also considered
introducing another type that only has `List<Cue>` and `durationUs`
fields, but it didn't seem necessary, since we want `startTimeUs`
everywhere else (except inside `SampleQueue`).
PiperOrigin-RevId: 545226847
Instead of playing or pausing itself, the ExoPlayer implementation should only update the playback suppression reason as and when audio outputs are added or removed dynamically.
PiperOrigin-RevId: 544379033
Add a fail-fast check in `ExoPlayerImpl` to ensure the equality of the lengths of `ShuffleOrder` and the current playlist. Also improve the documentation of `setShuffleOrder(ShuffleOrder)` with explicit instruction on this.
Issue: androidx/media#480
#minor-release
PiperOrigin-RevId: 544009359
It currently wrongly documents that it is only called before reading
streams (that has never been the case and all MediaPeriods already need
to handle calls after reading samples from the streams).
It was also a bit unclear what a discontinuity implies and the new
Javadoc calls out the main use case for discontinuties and the intended
meaning of returning a discontinuity.
#minor-release
PiperOrigin-RevId: 543989124
MP4 edit lists sometimes ask to start playback between two samples.
If this happens, we currently change the timestamp of the first
sample to zero to trim it (e.g. to display the first frame for a
slightly shorter period of time). However, we can't do this to audio
samples are they have an inherent duration and trimming them this
way is not possible.
#minor-release
PiperOrigin-RevId: 543420218
*** Original commit ***
Mark output sample as decode-only based on start time
We currently do the same check on the input timestamps and
expect the output timestamps to match. Some codecs produce
samples with modified timestamps and the logic is a lot safer
when the comparison with the start time is done on the output
side of the codec.
Issue: google/ExoPlayer#11000
***
PiperOrigin-RevId: 543379665
This change uses this new method everywhere we currently `instanceof`
check an `Extractor` directly. This allows us to introduce
wrapping/delegating `Extractor` instances - because the `instanceof`
checks will continue to operate on the underlying instance.
HLS is a slightly different case, because it directly re-instantiates
`Extractor` instances, which is not compatible with an arbitrary
wrapping structure. Luckily the only `Extractor` instances that HLS
re-instantiates do not support muxed subtitles, so won't be wrapped
in the first place (although future changes might use the
delegating-`Extractor` pattern for other purposes, which might affect
HLS).
PiperOrigin-RevId: 542550928
Devices pre-API 33 are not able to comprehend the position reset that occurs by the HAL in offloaded gapless track transitions.
PiperOrigin-RevId: 542503662
When an app tried to re-prepare a live streeam with server side inserted
ad after a playback exception, the player tried to find the ad group by
its index in the ad playback state of the next timeline when creating
the first period.
If a source that supports server side ad, has removed the ad playback
state when the source has been removed, this causes a crash. For live
streams this is a reasonable thing to do given the exception could be
caused by an invalid ad playback state.
This change removes the ad metadata from the current period for live
streams and the timeline. In case the ad playback state is not reset
by the source, the first timeline refresh would ad the metadata again.
PiperOrigin-RevId: 541959628
Some events may arrive after the playlist is cleared (e.g. load
cancellation). In this case, the DefaultPlaybackSessionManager may
create a new session for the already removed item.
We already have checks in place that ignore events with old
windowSequenceNumbers, but these checks only work if the current
session is set (i.e. the playlist is non-empty). The fix is to add
the same check for empty playlists by keeping note of the last
removed window sequence number.
PiperOrigin-RevId: 541870812
Instead of providing `playbackDurationUs` and `loadPositionUs` individually, which are used to calculate the buffer duration for CMCD logging, we can directly pass the pre-calculated `bufferedDurationUs` available in the `getNextChunk` method of the chunk source classes.
Issue: google/ExoPlayer#8699
#minor-release
PiperOrigin-RevId: 540630112
The APIs /related fields for playback suppression due to unsuitable output should be renamed from '..SuppressPlaybackWhenNoSuitableOutputAvailable' to '..SuppressPlaybackOnUnsuitableOutput'
PiperOrigin-RevId: 540555715
*** Original commit ***
Rollback of 2a6f893fba
*** Original commit ***
Set video size to 0/0 when video render is disabled
In terms of MCVR wi...
***
PiperOrigin-RevId: 540525069
The existing NullableType has been deprecated 5 years ago and causes
crashes in Kotlin apps because Kotlin doesn't recognize this annotation
as a nullable type annotation.
While we can't align on a single @Nullable annotation yet, we can at
least replace this one by JSR305's @Nonnull(MAYBE) as it fulfils all
requirements, including full Kotlin compatiblity. To avoid the
cumbersome name, we can redefine it as our own @NullableType
annotation. (We can't use @Nullable to avoid name clashes with the main
@Nullable annotation from AndroidX)
Issue: google/ExoPlayer#6792
PiperOrigin-RevId: 540497469
These comments reflect the parameter names of the constructor that
we're reflectively calling, but errorprone complains that they don't
match the parameter names of `Constructor.newInstance`.
PiperOrigin-RevId: 540348118
Previously `AsynchronousMediaCodecCallback.mediaCodecException` was
cleared when flushing completed. This behaviour was changed in
aeff51c507
so now the exception is not cleared.
The result after that commit was that we would **only** suppress/ignore
the expression if a flush was currently pending, and we would throw it
both before and after the flush. This doesn't really make sense, so this
commit changes the behaviour to also throw the exception during the
flush.
This commit also corrects the assertion in
`flush_withPendingError_resetsError` and deflakes it so that it
consistently passes. The previous version of this test, although the
assertion was incorrect, would often pass because the
`dequeueInputBuffer` call would happen while the `flush` was still
pending, so the exception was suppressed.
#minor-release
PiperOrigin-RevId: 540237228
We currently do the same check on the input timestamps and
expect the output timestamps to match. Some codecs produce
samples with modified timestamps and the logic is a lot safer
when the comparison with the start time is done on the output
side of the codec.
Issue: google/ExoPlayer#11000
PiperOrigin-RevId: 540228209
With playback suppression in place, the devices can be added when the playback on ExoPlayer is in the suppression state. Also, it is quite possible that a suitable audio output device on which playback is ongoing gets removed requiring the Player to pause the playback. These requirements can be fullfilled using AudioDeviceCallbacks which has been implemented with this change.
PiperOrigin-RevId: 539559193
In case the player is reset while a live stream is playing, the current
period needs to be a placeholder. This makes sure that the default start
position is used when the first live timeline arrives after re-preparing.
#minor-release
PiperOrigin-RevId: 539044360
Add support for including Common Media Client Data (CMCD) in the outgoing requests of adaptive streaming formats DASH, HLS, and SmoothStreaming.
API structure and API methods:
* CMCD logging is disabled by default, use `MediaSource.Factory.setCmcdConfigurationFactory(CmcdConfiguration.Factory cmcdConfigurationFactory)` to enable it.
* All keys are enabled by default, override `CmcdConfiguration.RequestConfig.isKeyAllowed(String key)` to filter out which keys are logged.
* Override `CmcdConfiguration.RequestConfig.getCustomData()` to enable custom key logging.
NOTE: Only the following fields have been implemented: `br`, `bl`, `cid`, `rtp`, and `sid`.
Issue: google/ExoPlayer#8699
#minor-release
PiperOrigin-RevId: 539021056
This CL introduces the new public API setSuppressPlaybackWhenUnsuitableOutput which if set to TRUE will cause suppression of a requested playback if that is going to happen on an unsuitable audio output (e.g. builtin speaker on a WearOS device).
PiperOrigin-RevId: 538867212
*** Original commit ***
BEGIN_PUBLIC
Set video size to 0/0 when video render is disabled
In terms of MCVR with a `VideoRendererEventListener`, the video size is set to
0/0 right after `onVideoDisabled()` is called and is set to the actual size as
soon as the video size is known after 'onVideoEnabled()`.
For ExoPlayer and in terms of the `Player` interface, `Player.getVideoSize()`
returns a video size of 0/0 when `Player.getCurrentTracks()` does not support
`C.TRACK_TYPE_VIDEO`. This is ensured by the masking behavior
***
PiperOrigin-RevId: 537938947
With `AudioOffloadModePreference` `AUDIO_OFFLOAD_MODE_PREFERENCE_REQUIRED`, the `DefaultTrackSelector` will select a single audio track that it finds is offload compatible. If not any audio track is supported in offload, then no track will be selected.
PiperOrigin-RevId: 537877183
Otherwise, texture output errors out if video decoding decodes faster than audio,
hitting the end of the file, while audio is still in the middle of the file.
PiperOrigin-RevId: 536679568
*** Original commit ***
ExoPlayer: Add setVideoFrameProcessorFactory().
This allows apps to use a custom VideoFrameProcessor implementation for video
playback. This may be useful, for example, when outputting to a texture.
***
PiperOrigin-RevId: 536391597
This change moves the default logic into the actual Player
implementations, but does not introduce any behavior changes compared
to addMediaItems+removeMediaItems except to make the updates "atomic"
in ExoPlayerImpl, SimpleBasePlayer and MediaController. It also
provides backwards compatbility for cases where Players don't support
the operation.
Issue: google/ExoPlayer#8046
#minor-release
PiperOrigin-RevId: 534945089
This change removes it from `Player.Listener` and `AnalyticsListener`,
use `onPositionDiscontinuity` with `DISCONTINUITY_REASON_SEEK` instead.
#minor-release
PiperOrigin-RevId: 534757426
Added piping to present offload support from the audio sink to the renderer and track selection. Applications can set offload mode preference and with both sink support and compatible track selection, renderer will be configured for offload.
PiperOrigin-RevId: 534450534
This allows apps to use a custom VideoFrameProcessor implementation for video
playback. This may be useful, for example, when outputting to a texture.
PiperOrigin-RevId: 534044831
The methods in ExoPlayerImpl and MediaControllerImplBase that determine
the new PlayerInfo/PlaybackInfo currently have a hard-to-reason-about
setup where the method generating the new info accesses other methods
that rely on the existing class field instead of working with the
passed in PlayerInfo/PlaybackInfo. This prevents reuse of the util
methods (e.g. for replaceMediaItems) because they access potentially
stale state.
This change untangles these methods a bit by making the util methods
either static or at least ensure that they don't rely on existing
class fields of PlayerInfo/PlaybackInfo. Overall, the change is a
complete no-op.
#minor-release
PiperOrigin-RevId: 534036633
In terms of MCVR with a `VideoRendererEventListener`, the video size is set to
0/0 right after `onVideoDisabled()` is called and is set to the actual size as
soon as the video size is known after 'onVideoEnabled()`.
For ExoPlayer and in terms of the `Player` interface, `Player.getVideoSize()`
returns a video size of 0/0 when `Player.getCurrentTracks()` does not support
`C.TRACK_TYPE_VIDEO`. This is ensured by the masking behavior of
`ExoPlayerImpl` that sets an empty track selection result when the playing
period changes due to a seek or timeline removal.
When transitioning playback from a video media item to the next, or when
seeking within the same video media item, the renderer is not disabled.
#minor-release
PiperOrigin-RevId: 533479600
This is useful for cases where only certain types (e.g. only video)
from a source are needed and other tracks should be filtered out
completely to avoid later track selection issues.
#minor-release
PiperOrigin-RevId: 533394658
Use a non deprecated constructor that includes the option to provide a `channelDescriptionResourceId` parameter.
#minor-release
PiperOrigin-RevId: 532450975
This change adds end-to-end Robolectric playback tests which handle
the scenario the player is playing audio via passthrough and
AudioTrack raises the ERROR_DEAD_OBJECT error upon which the player
attempts to recover by switching to another audio format.
PiperOrigin-RevId: 531180183
Tone-mapping an HDR video with MediaCodec on sm-s908u1 was timing out.
The reason for that is that the decoder was dropping frames, and the
ExternalTextureManager was therefore never propagating the end-of-stream
signal.
There was already a workaround for a similar issue but restricted to
sm-f936b. Removed the model check as the bug is probably present on more
devices.
PiperOrigin-RevId: 530639437
Adding items to an empty playlist is slightly different from adding
items to a non-empty playlist, because the former usually requires to
handle a change in the current item, position and playback state,
while the latter is not expected to affect the current item, position
or state.
The current ExoPlayer and SimpleBasePlayer code doesn't account for
this difference, leading to inconsistent behavior between
setMediaItem(s) and addMediaItem(s) when called on an empty playlist.
PiperOrigin-RevId: 530549928
* Implement RendererCapabilities.Listener in DefaultTrackSelector.
* Add new methods TrackSelector.invalidateForRendererCapabilitiesChange and TrackSelector.InvalidateListener.onRendererCapabilitiesChanged.
* Add new field allowInvalidateSelectionsOnRendererCapabilitiesChange to DefaultTrackSelector.Parameter to allow opt-in of the renderer capabilities detection feature.
* Add logics of triggering track reselection when renderer capabilities change.
PiperOrigin-RevId: 529067433
renderOutputFrame actually renders frames to an output surface. We'll soon have
a releaseOutputFrame method, that would release resources associated with an
output time, so rename this to disambiguate the two methods.
Also rename onOutputFrameAvailable to onOutputFrameAvailableForRendering, to
make it clear this is not available for "release"
This change should be a renaming-only change and have no functional differences.
PiperOrigin-RevId: 527844947
`prepare()` now logs a warning if it's called before `setPlayer()`
because it's not possible to tell if it's being called on the wrong
thread (since 3480a27994).
This change finds all the places one is called immediately after the
other and flips the order to be more correct.
Issue: androidx/media#350
#minor-release
PiperOrigin-RevId: 526582294
This simplifies the addition of new fields in the future.
Also do some misc clean up for the volume limit values:
- Add some documentation to mention assumed defaults
- Add the IntRange annotations to match the ones we have in Player
already
- Mention the limits in the relevant Player methods
- Avoid bundling default values
- Improve range checks for masking in MediaController
PiperOrigin-RevId: 526029619
If the limited number of input buffers causes reading of all samples except the last one conveying end of stream, then the last frame will not be rendered.
PiperOrigin-RevId: 525974445
Previously, ExoPlayerImpl had volume flags hardcoded to SHOW_UI, but now the developer can choose what happens on volume change. The old methods have been deprecated.
PiperOrigin-RevId: 523974358
The setter command is only used for setPlaylistMetadata and can
be named COMMAND_SET_PLAYLIST_METADATA. The getter commnad is
used to access getMediaMetadata and getPlaylistMetadata and can
be better named COMMAND_GET_METADATA to reflect this usage.
PiperOrigin-RevId: 523673286
It is not possible to provide a safe deprecation path because
BaseTrackSelection can't easily know which of the methods is
implemented by subclasses.
PiperOrigin-RevId: 523471578
Change what format is logged from MediaCodecAudioRenderer when
AudioSink throws InitializationException. We printed the
AudioSink's format, which most of the times is audio/raw (PCM)
and not the renderer's format. With this change both formats are
logged.
#minor-release
Issue: google/ExoPlayer#11066
PiperOrigin-RevId: 523456840
In addition to the changes in 3a5c4277a7
This change essentially reverts 30e5bc9837 (Merged Jul 2022).
From this CL on, `VideoFrameProcessor` takes in non-offset, monotonically
increasing timestamps. For example, with one 5s and one 10s video,
- `VideoFrameProcessor`'s input should start from 0
- On switching to the second video (10s), the timestamp of the first frame in
the second video should be at 5s.
In ExoPlayer however, `streamOffset` is managed differently and thus needs
correction before sending the frames to `VideoFrameProcessor`:
- The timestamp of the first video is offset by a large int, so the first frame
of the first media item has timestamp (assuming) 10000000000000000
- The last frame of the first media item has 10000005000000000
- At this point the stream off set is updated to 10000005000000000
- The pts of the first frame of the second video starts from 0 again.
PiperOrigin-RevId: 523444236
There is a race with the ad period preparation having completed
and `onDownstreamFormatChanged` being called when a live stream
is joined in an ad period. In this case the stream event metadata
of the period is immediately emitted and causing an ad media period
being created that is selected in `getMediaPeriodForEvent` before
being prepared (1 out of 4).
Using an `isPrepared` flag makes sure we don't hand out the media
period to early in `getMediaPeriodForEvent`.
PiperOrigin-RevId: 522340046
* Add a new event `onAudioCapabilitiesChanged` in `AudioSink.Listener` interface.
* Add an interface `RendererCapabilities.Listener`, which will listen to `onRendererCapabilitiesChanged` events from the renderer.
* Add `getRendererCapabilitiesReceiver` method for `TrackSelector`, and register/unregister the `TrackSelector` as the `RendererCapabilitiesReceiver` (if implemented) when the `ExoPlayer` is initialized/released.
* Trigger the `AudioSink.Listener.onAudioCapabilitiesChanged` and further `RendererCapabilities.Listener.onRendererCapabilitiesChanged` events when the audio capabilities changes are detected in `DefaultAudioSink`.
PiperOrigin-RevId: 521427567
The `DashMediaSource` wrongly added an offset to the media times set
to the `MediaLoadData`. With this the `startTimeMS` and `endTimeMs`
don't represent the positions in the period but in the stream.
`DashMediaSource` was the only call site that was setting the offset
to a non-zero value. So if we are using 0 for the `DashMediaSource`
as well, the offset is redundant and we can remove it everywhere.
PiperOrigin-RevId: 520682026
The media3-hosted versions of these SVGs were removed due to a change in
the way the reference docs are generated. While work on getting them
hosted on developer.android.com, this change simply links to the
(identical) exoplayer2 versions in order to fix the media3 docs.
#minor-release
PiperOrigin-RevId: 520647905
This means we don't need to manually store the result of `get()` into a
local to convince the nullness checker that it remains non-null.
PiperOrigin-RevId: 520576719
For multi-period live streams the content timeline for
which the global ad playback state has been split needs
to be kept together to not run into a race between
timeline refreshes and ad events.
PiperOrigin-RevId: 520358964
`DefaultDrmSession(Manager)` expect most of their methods to be called
on the 'playback thread'. There isn't a playback thread in the case of
`OfflineLicenseHelper`, but in that case it's the thread backing
`DefaultDrmSessionManager.playbackLooper`, which is `OfflineLicenseHelper.handlerThread`.
PiperOrigin-RevId: 520053006
JaCoCo introduces private synthetic methods (even on interfaces) which
have to be skipped when checking that a 'forwarding' implementation does
forward everything. Instead we can use the existing `getPublicMethods()`
method which implicitly skips these (since they're private).
PiperOrigin-RevId: 519665752
When MediaCodecRenderer is given an empty sample stream, it puts
its output format change tracking in a bad state where we never
process future stream changes because we are waiting for a sample
that doesn't exist.
We can fix this by:
- Looping the pending output stream changes to see if we processed
more than one change at once (this fixes the tracking for empty
sample streams that are not the first in the queue).
- Checking if none of the previous streams queued any samples in
onStreamChanged to handle this in the same way as the case
where we already output all samples (this fixes the problem when
the empty sample stream comes first in the queue).
- Also calling onProcessedStreamChange for the case above, which
was missing previously.
#minor-release
PiperOrigin-RevId: 519226637
This wasn't added so far because releasing is always allowed from a
MediaController (as it just releases the connection, not the session
player). But Player instances can be created for other purposes and
the receiver of a Player instance should not always be allowed to
call release if it doesn't own the player resource.
PiperOrigin-RevId: 519121122
The content timeline field may be updated when the live timeline
is refreshed in the looper event preceding the runnable that is
posted to the player thread. Hence a new timeline may contain a
new period uid that is not present in the ad playback state map.
Using a final reference makes sure period and ad playback state
match when asserted.
PiperOrigin-RevId: 518228165
This change makes sure that live ad periods that are played are
skip when attempted to be added to the queue. To make this work
the existing filter logic had to be take into account the content
resume offset that live periods use.
PiperOrigin-RevId: 518068138
* Add `release` method to Renderer and AudioSink interfaces.
* Call the `release` method for renderers when the ExoPlayer is going to be released.
PiperOrigin-RevId: 517135677
While playback thread is 'asleep' during audio offload playback, the playbackInfo.positionUs is not being constantly updated. During this time, the returned value from getCurrentPosition should return an estimate based on the most recent value and playback speed.
PiperOrigin-RevId: 516550509
* Add AudioDeviceCallbackApi23 class which extends the AudioDeviceCallback.
* Add registerAudioDeviceCallback and unregisterAudioDeviceCallback methods for Api23.
* Modify the logics of AudioCapabilitiesReceiver constructor, register and unregister methods.
PiperOrigin-RevId: 516183997
This change makes sure that the `AdPlaybackState` of any period can
contain an empty postroll placeholder.
The placeholder postroll should be represented in the `MediaPeriodId`
of a content period as `nextAdGroupIndex`, but should be ignored when
building the list of `MediaPeriodInfo` in the `MediaPeriodQueue`. This
is required to allow to add an ad group to ad playback state of the
content period that is currently being played, instantly insert an ad
period into the media period queue and immediately transition playback
to the new period.
This change makes sure and tests that
- a live server side inserted postroll placeholder can be inserted to
a `AdPlaybackState` in well-defined and tested way (helper method)
- a postroll placeholder is NOT ignored when
`AdPlaybackState.getAdGroupIndexAfterPositionUs` is called (this
is required when evaluating the `nextAdGroupIndex`).
- a postroll placeholder is ignored when
`AdPlaybackState.getAdGroupIndexForPositionUs` is called (this is
required to not attempt to play the ad and is analogous to ignore the
post roll placeholder in a single period timeline).
- `MediaPeriod.getFollowingMediaPeriodInfo()` does not include a
`MediaPeriodInfo` for the placeholder postroll when building the
queue.
PiperOrigin-RevId: 515079136
We currently rely on the raw playback head position to check if any
data is pending in the AudioTrack (e.g. to know if the renderer is
still ready). We can use the value returned from getCurrentPositionUs
instead to align the "isReady" logic with the playback position logic.
This has the side effect that getPlaybackHeadPosition position is called
less often when the position is obtained via getTimestamp.
PiperOrigin-RevId: 514747613
Once the value returned from AudioTimestampPoller advances, we
only need getPlaybackHeadPosition to sample sync params and
verify the returned timestamp. Both of these happen less often
and we can avoid calling getPlaybackHeadPosition if we don't
actually need it.
PiperOrigin-RevId: 512882170
Playback parameter signalling can be quite complex because
(a) the renderer clock often has a delay before it realizes
that it doesn't support a previously set speed and
(b) the speed set on media clock sometimes intentionally
differs from the one surfaced to the user, e.g. during
live speed adjustment or when overriding ad playback
speed to 1.0f.
This change fixes two problems related to this signalling:
1. When resetting the media clock speed at a period transition,
we don't currently tell the renderers that this happened.
2. When a delayed speed change update from the media clock is
pending and the renderer for this media clock is disabled
before the change can be handled, the pending update becomes
stale but it still applied later and overrides any other valid
speed set in the meantime.
Both edge cases are also covered by extended or new player tests.
Issue: google/ExoPlayer#10882
#minor-release
PiperOrigin-RevId: 512658918
