The test is flkay (2/1000 runs) because the decoder initialization
before and after the seek are not perfectly deterministic. I couldn't
find a way to make them deterministic, so slightly chaning the test
setup instead. The test setup change doesn't affect the scenario being
tested.
PiperOrigin-RevId: 301390491
When no tracks are selected (or only tracks of unknown type), the
target buffer size is calculated to be 0. This means the player
won't request to buffer more data, nor can it start playback and
will be stuck forever.
PiperOrigin-RevId: 301374229
The assertion about the expected formats doesn't really belong in a
fake, the assertions should be closer to the test method.
This gets in the way when I try and write a new test in
AnalyticsCollectorTest that doesn't use the expected, constant Format
(because i want to specify drmInitData) - but changing the expected
Format is tricky because it's hard-coded into the FakeVideoRenderer
inner class.
I replaced the assertion in FakeRenderer with assertions in test
methods that used to assert on the format count.
PiperOrigin-RevId: 301353072
Previously calling removeListener would remove all instances of that
listener. Now it only removes a single instance.
This probably should have been part of introducing the Multiset:
2bd4d61b9b
PiperOrigin-RevId: 301191940
Without this change there's confusing behaviour if you pass e.g.
AnalyticsCollector (which implements both DrmSessionEventListener and
MediaSourceEventListener) to MediaSource.addEventListener: It will
receive DRM events too, even though you never passed it to
MediaSource.addDrmEventListener.
Also add some tests for MediaSourceEventDispatcher.
PiperOrigin-RevId: 301169915
This prevents OOM errors for high bitrate streams that attempt to fill
the buffer regardless of the memory usage.
Also change the max buffer sizes to ensure this is a no-op for video
streams < 20Mbps and audio streams < 260kbps.
Issue:#6647
Issue:#7006
PiperOrigin-RevId: 300720299
We currently have the following logic to update renderers during
period transitions:
1. Wait for the currently reading period to finish reading all its
streams.
a. Advance reading period.
b. Set all streams that can't be replaced to final.
c. If streams can be replaced, replace them now.
2. Wait until playback position reaches the transition point
a. Disable all unneeded renderers (or those that need
re-enabling).
b. Advance playing period.
c. Enable all new renderers (i.e. all except the ones where
we replaced streams directly in step 1c.
This logic causes delays because steps 2a and 2c can easily happen
before 2b. Doing this allows a smooth transition for cases where
renderers change or where they need to be re-enabled.
The new order after this change is:
1. Wait for currently reading period to finish reading.
a. Advance reading period.
b. Set all streams that can't be replaced to final.
2. Update reading renderers iteratively.
a. If streams can be replaced, replace them asap.
b. If renderes need to be disabled, do so as soon as the
respective renderer ended.
c. Once step b is fully finished, enable or re-enable all new
renderers.
3. Wait unril playback position reaches the transition point AND
all tasks in step 2 are done (i.e. all renderers are set up for the
playing period).
a. Advance playing period.
As a nice side effect, decoder enabled and disabled events are now
always reported for the reading period, which is more consistent with
other renderer callbacks.
PiperOrigin-RevId: 300526983
After this change MediaClocks and ExoPlayerImplInternal don't depend on the deprecated PlaybackParameter anymore but only know about playbackSpeed.
PiperOrigin-RevId: 300428791
This change deprecates the PlaybackParameters and remove the skipSilenceField from the PlaybackParameters. This implies that enabling and disabling skipping silences needs to be done on the Player.AudioComponent after this change.
After submission of the change, all Player API changes are done which are required to bring playbackSpeed and skipSilenceEnabled in the converged Player API state.
PiperOrigin-RevId: 300420843
*** Original commit ***
Rollback of 949bbcfb2e
*** Original commit ***
Add masking for playWhenReady.
Masking is needed as soon as updates to a value can happen both in EPI
and EPII. PlayWhenReady is currently not masked because all updates
happen in EPI only. As soon as we allow pausing at certain times
(e.g. end of a stream), playWhenReady c...
***
PiperOrigin-RevId: 300330307
*** Original commit ***
Add masking for playWhenReady.
Masking is needed as soon as updates to a value can happen both in EPI
and EPII. PlayWhenReady is currently not masked because all updates
happen in EPI only. As soon as we allow pausing at certain times
(e.g. end of a stream), playWhenReady changes may be triggered by EPII
as well and that's why we need masking.
To know when the value actually changed, we also need to update the
internal state to include whether playback is supppressed.
***
PiperOrigin-RevId: 300303307
Masking is needed as soon as updates to a value can happen both in EPI
and EPII. PlayWhenReady is currently not masked because all updates
happen in EPI only. As soon as we allow pausing at certain times
(e.g. end of a stream), playWhenReady changes may be triggered by EPII
as well and that's why we need masking.
To know when the value actually changed, we also need to update the
internal state to include whether playback is supppressed.
PiperOrigin-RevId: 300284613
Exceeding the period duration may mean that that playback transitions
to another item even if the player is currently paused.
PiperOrigin-RevId: 300133655
There is no need for that, updating them is often forgotten and
takes up too much line space. Replace by a single TAG per test class.
PiperOrigin-RevId: 300113072
This change uses mime types in a functionally equivalent way to how we used the extension hint so far.
Using a mimeType instead of the extension has some advantages. Most importantly mimeTypes are used by the cast SDK with which we want to achieve interoperability in the cast extension.
Using a mimeType instead of the extension hint further appears to be a bit more clear (which might be opinionated). Further mime types are a well known and widely used concept to identify file type on the internet and it provides asterix based generalizations (audio/*, */*) which could express the media type OTHER that ExoPlayer is using internally (no usage of asterix required so far though).
PiperOrigin-RevId: 300058945
handlePrepare/Stop/SetPlayReady can be merged together as they all
handle changes to the desires state of the player.
Also, simplify parts of the control flow by not mixing code that
determines if audio focus needs to be handled with code that actually
acquires or abandons the focus.
PiperOrigin-RevId: 299824857
Without this option it's impossible to merge periods covering
different timestamps (at least not without playback issues).
Issue:issue:#6103
PiperOrigin-RevId: 299817540
The default Robolectric Looper simulation mode is changing to PAUSED from LEGACY.
The following tests fail in this new mode, and are thus being defaulted to LEGACY.
For more details see go/robolectric-legacy-looper-mode-lsc
Cleanup change automatically generated by error-prone refactoring
//third_party/android/androidx_test/tools/errorprone/java/androidx/test/tools/errorprone:LegacyLooperModeConverter_refactoring
Tested:
TAP train for global presubmit queue
http://test/OCL:297627974:BASE:298600828:1583273401491:7d94dbaa
PiperOrigin-RevId: 298809656
This change adds the createMediaSource(MediaItem mediaItem) method to the MediaSourceFactory interface. It doesn't deprecate createMediaSource(Uri uri) to keep the cl smaller. Deprecation and removing calls to the deprecated method from within the library and extension follow in a separate CL.
PiperOrigin-RevId: 298352442
The test had two problems:
1. It posts messages using a Handler and we need to idle the main looper
to actually deliver this message.
2. SimpleDecoder uses a background thread that is not within our control
from the test. Ensure the decoding happens after we queue input buffers
by using a lock.
PiperOrigin-RevId: 298300175
This is one step toward following the google3's test naming convention.
See go/java-testing/getting_started#basic-test-template for details
why prefix test isn't necessary.
This CL is generated by following command
$ find -name '*Test.java' | xargs -I{} sed -i 's/^\ \ public\ void\ test\([A-Z]\)\(.*\)$/ public void \L\1\E\2/' {}
and then manually modified following tests where test method names conflict with test target.
- VorbisUtilTest
- VorbisReaderTest
- UtilTest
- DownloadManagerDashTest
- DefaultOggSeekerTest
- OggPageHeaderTest
- HlsMasterPlaylistParserTest
PiperOrigin-RevId: 298074653
We should only ignore seek to the current position if we are
currently READY or BUFFERING. Also, pending initial seek positions
should only be saved while we have an empty timeline, independent of
the player state.
Issue:#6886
PiperOrigin-RevId: 297813854
This is more accurate since it's just a placeholder and none of the
values is provided by the media.
It also allows to fix a problem in ClippingMediaSource where we
couldn't detect a clipping error because we didn't know if the
timeline is a placeholder or not.
Issue:#5924
PiperOrigin-RevId: 297813606
The positions were interchangeably used with window and period
positions. This change more clearly ensures that all positions in the
AdPlaybackState are based on periods and that we use the right adjustments
for all usages.
PiperOrigin-RevId: 297811633
DefaultLoadControl applies the same min buffer duration to audio
and video. By default, min buffer is set equal to max buffer (50 seconds).
PiperOrigin-RevId: 297324489
Note: The dump files will need updating again when the extractors
are modified to only set the appropriate bitrate. Enhancing the
test first is nice, because it means that in subsequent CLs the
dump file updates can be used to quickly see what's changed in
the output.
PiperOrigin-RevId: 297188367
This change deprecates PlaybackParameter in AudioSink and splits it into playbackSpeed and skipSilenceEnabled. These properties are set separately in a future CL. The playback speed will be set through the MediaClock, while skipSilenceEnabled will be set by sending a message to the audio renderer.
PiperOrigin-RevId: 296457043
Not important, but when overriding a method that can return null,
it seems preferable to put @Override first, followed by what it's
overriding (which includes the @Nullable).
Also remove explicit @NonNull use in the core library. @NonNull is
propagated by default, so this is redundant.
PiperOrigin-RevId: 296188379
This is one step toward following the google3's test naming convention.
See go/java-testing/getting_started#basic-test-template for details
why prefix test isn't necessary.
This CL is generated by following command
$ find -name '*Test.java' | xargs -I{} sed -i 's/^\ \ public\ void\ test\([A-Z]\)\(.*\)$/ public void \L\1\E\2/' {}
PiperOrigin-RevId: 296169886
CryptoInfo.iv length is always 16. When the actual initialization vector
is shorter, zero out the trailing bytes.
Issue: #6982
PiperOrigin-RevId: 295575845
This is closer to how our actual renderers look like and allows tests
to use a similar logic to show/suppress the first frame in follow-up changes.
PiperOrigin-RevId: 295557548
We will eventually remove the workaround from ExoPlayerImplInternal
added in
b84bde0252
and replace it by an error that gets thrown if the LoadControl behaves
badly.
PiperOrigin-RevId: 295556131
This information isn't easily available to the player at the moment (or it
would need to revaluate this every time), so add it to MediaPeriodInfo similar
to the existing isLastInTimelinePeriod.
The player needs to know whether a MediaPeriod is the last in its Timeline
window if we want to add an option to pause at the end of a window.
PiperOrigin-RevId: 294877628
Add fields in DecoderCounters for computing the average video frame
processing offset.
The MediaCodecVideoRenderer reports the video frame processing offset
and the demo app presents it on the debug information.
PiperOrigin-RevId: 294677878
The transition in EPII happens based on the duration of the periods, not
the windows. So use this duration in case they are not the same.
Also make sure to send the message at duration-1 because the playback position
at the duration is technically already the first position in the next item.
PiperOrigin-RevId: 294669335
This simplifies sending messages to the end of a stream. This was
already possible, but users needed to wait until the duration is known
before sending the message. This duration resolution can happen as part of the message position resolution.
PiperOrigin-RevId: 294626984
This is a preliminary step toward adding a DataSpec.Builder,
which is needed for sanity when adding DataSpec.customData.
The existing absoluteStreamPosition field is very error prone,
because anyone using a Builder to adjust the request position
will need to remember to adjust two values:
dataSpec
.buildUpon()
.setAbsoluteStreamPosition(x)
.setPosition(x)
.build();
Furthermore, the difference between position and
absoluteStreamPosition is irrelevant in nearly all cases. In
the core library, the difference is only relevant when initializing
AES encryption/decryption to write/read cache files.
Replacing absoluteStreamPosition with uriPositionOffset will
simplify the code block above to:
dataSpec
.buildUpon()
.setPosition(x)
.build();
PiperOrigin-RevId: 294485644
Currently, the subset of audio tracks for adaptation is selected
purely based on the size of the subset in the track group, completely
ignoring the previously selected best individual track.
This change ignores all tracks with a different configuration than the
previously selected best track.
PiperOrigin-RevId: 294231806
This allows to simulate samples in a stream more accurately
particularly when streams are prepared at a non-zero position and
issuing a sample with position=0 is not expected.
Also makes seek more realistic by also issuing one sample again.
PiperOrigin-RevId: 293344081
Once we receive an update from a masked source, we first start the
preparation of an already pending period, and only then notify the
player of the new timeline. If the period prepares immediately inline,
the MediaPeriod.onPrepared callback arrives before the
onPlaylistUpdateRequested call in the Player. THis is the wrong order
and causes issues when the player tries to lookup information in the
timeline that doesn't exist yet.
This change fixes preroll playbacks before live streams.
PiperOrigin-RevId: 293340031
This change deprecates Player.onPlayerStateChanged(boolean pwr, int state). It removes deprecation for trivial cases. I'll remove other deprecated usages (mostly in ui module) in follow-up CLs to not bloat this CL.
PiperOrigin-RevId: 292917872
*** Original commit ***
Rollback of 3c56b113e4
*** Original commit ***
Rollback of d48dc4c159
*** Original commit ***
Move getting-stuck-prevention into DefaultLoadControl.
We recently added code that prevents getting stuck if the buffer is low and
the LoadControl refuses to continue loading (b84bde0252).
Move this logic...
***
PiperOrigin-RevId: 292457964
This is a nice-regardless improvement to SampleQueue, which will
likely to used to fix the referenced issue. It makes it possible
for SampleQueue subclasses to support dynamic changes to format
adjustment in a non-hacky way.
Issue: #6903
PiperOrigin-RevId: 292314720
We currently only keep the requested next content start position while
we are playing ads. However, we should also keep at least before a content
period is fully prepared to not loose the information about the user intent.
PiperOrigin-RevId: 291705752
There are existing bugs that need this flag to know whether the
current information in the window is still a placeholder or can
already be relied on for further calculation.
This flag will probably only ever be set in DummyTimeline, so it's
not added to the window.set method to avoid updating all clients.
Issue:#5924
PiperOrigin-RevId: 291705637
It could either live in .util or .extractor, but since it's not needed
outside the extractor package in core (and the FLAC extension), and
FlacStreamMetadataTest uses a FLAC asset, it seems preferable to move it
into the extractor package.
PiperOrigin-RevId: 291372032
Using @Test(expected=...) is discouraged, since the test will pass if
any statement in the test method throws the expected exception.
PiperOrigin-RevId: 291338224
The only remaining use is to provide the initial position for the first media
period in the queue. At this point, the value is always equivalent to
PlaybackInfo.positionUs because they are set together to the same value in
PlaybackInfo.copyWithNewPosition.
PiperOrigin-RevId: 290749294
I needed to use Cue.Builder instead of just SpannableStringBuilder for
the regionOutput values, so I could attach the vertical info where
appropriate (since this is a property of the Cue, not a span).
PiperOrigin-RevId: 290709294
If an exception is thrown between updating the timeline and updating
the position in playbackInfo, the state may be inconsistent.
Exceptions are expected to be thrown while updating the player state
and we should handle such cases in a consistent way.
Similar to how we handle the same situation in seekToInternal,
the state is updated in a final block such that it gets updated to the
latest state even if an error occurs. Moving both the timeline and
position update together also ensures they always stay consistent.
PiperOrigin-RevId: 290624020
This restructure moves all the position resolving code to a static method and
removes the dependency of the MediaPeriodQueue on having an up-to-date timeline.
Both steps allow simplified reasoning about the code as the static method can't change
the state of the player, and there is no risk the queue can use the wrong timeline.
These propoerties allow to fix a bug causing inconsistent states in a follow-up step.
PiperOrigin-RevId: 290616395
This makes MPEG audio utilities similar to utilities we have for WAV,
AC-3 etc., and moves them out of the extractor package so that an
extractor module can be split out without needing to have a class in the
extractor package in the common library.
PiperOrigin-RevId: 290595089
*** Original commit ***
Rollback of ff89170b00
*** Original commit ***
Fix some logic in AnalyticsCollector.
All events issued from ExoPlayerImpl (i.e. Player.EventListener events) currently
try to use the media period data from the playing media period as set in the
playback thread queue. This is only correct as long as there no pending masking
operations in ExoPlayerImpl. That's why we currently disable this whenever the timeline
is...
***
PiperOrigin-RevId: 290593700
*** Original commit ***
Fix some logic in AnalyticsCollector.
All events issued from ExoPlayerImpl (i.e. Player.EventListener events) currently
try to use the media period data from the playing media period as set in the
playback thread queue. This is only correct as long as there no pending masking
operations in ExoPlayerImpl. That's why we currently disable this whenever the timeline
is empty or a seek is pending. Since adding all the playlist API methods to the player,
this is no longer the right choice. Moreover,...
***
PiperOrigin-RevId: 290312118
Currently both are updated by separate setters. If an exception is thrown between
the two setters, the state may not be consistent.
Avoid this problem by always setting them together.
PiperOrigin-RevId: 290293600
All events issued from ExoPlayerImpl (i.e. Player.EventListener events) currently
try to use the media period data from the playing media period as set in the
playback thread queue. This is only correct as long as there no pending masking
operations in ExoPlayerImpl. That's why we currently disable this whenever the timeline
is empty or a seek is pending. Since adding all the playlist API methods to the player,
this is no longer the right choice. Moreover, we don't have a definite API that tells
AnalyticsCollector when a playlist API call has been handled (and we don't want to
have one).
We can fix this by always using the current Player position information as the source
of truth (instead of the media period queue). This is definitely more correct and also
works while a masking operation is pending. To fill in the additional information from
the media period queue, we can look up a matching media period. This may not be the
first one in the list if an operation is pending.
The new methods are similar to the previous tryResolveWindowIndex method, but:
1. They are always used (i.e. the current Player state is the main source of truth)
2. They also check the correct ad playback state, that was just ignored previously.
PiperOrigin-RevId: 290284916
Currently seeks are basically ignored. However, it's more realistic to re-queue the
single sample if the seek is to position 0.
PiperOrigin-RevId: 290273564
*** Original commit ***
Rollback of d48dc4c159
*** Original commit ***
Move getting-stuck-prevention into DefaultLoadControl.
We recently added code that prevents getting stuck if the buffer is low and
the LoadControl refuses to continue loading (b84bde0252).
Move this logic into DefaultLoadControl to keep the workaround, and also apply the
maximum buffer size check in bytes if enabled. ExoPlayerImplInternal will now
throw if a...
***
PiperOrigin-RevId: 290273295
This method has two use cases:
1. Seeking. Calls are immediately preceded by a call to rewind(), and
the returned value isn't important unless it's ADVANCED_FAILED (i.e.
the caller is only interested in success and failure).
2. Advancing. The return value is important unless it's ADVANCED_FAILED,
in which case the caller wants to treat it as 0.
This change creates separate methods for each use case. The new seekTo
methods automatically rewind and return a boolean. The updated advanceTo
method returns 0 directly in cases where ADVANCED_FAILED was returned.
Arguments that were always hard-coded to true by callers have also been
removed.
This change is a step toward one possible solution for #6155. How we'll
solve that issue is still up for discussion, but this change seems like
one we should make regardless!
Issue: #6155
PiperOrigin-RevId: 290053743
Currently the following sequence of events happens at automatic period transitions:
1. Update queue (=release old playing period)
2. Disable unused renderers
3. Enable newly needed renderers
This order requires difficult to follow workarounds in AnalyticsCollector for all
events related to step 2 (disable renderers). The current media period has already
been advanced so can't be used. The current workaround saves the last known playing
media period that was published as part of a PlaybackInfo update in ExoPlayerImpl.
This works in most cases, but is inherently wrong because the published state in
ExoPlayerImpl may be completely unrelated to the updates happening on the playback
thread (e.g. if many other operations are pending).
Simplify and fix this problem by changing the order of the events above:
1. Disable unused renderers.
2. Update queue
3. Enable newly needed renderers.
This way the current playing media period can be used for both renderer disable
and renderer enable events, thus it's correct in all cases and the workaround
in AnalyticsCollector can be removed.
PiperOrigin-RevId: 290037225
We currently have a currentMediaPeriodId and an activeSessionId that are more
or less tracking the same thing unless the current media period isn't "active" yet.
Simplify this logic by using a single currentSessionId field and the respective
isActive flag of this session. Also move all session creation and activation code in
the same method to make it easier to reason about the code.
This change also fixes a subtle bug where events after a seek to a new window
are not ignored as they should.
PiperOrigin-RevId: 289432181
These make the interesting bits of each assertion harder to follow imo.
Also remove all the assertWithMessage() calls at the same time, Olly
convinced me these are rarely useful since you can click from the stack
trace to the failing line in the IDE.
PiperOrigin-RevId: 288470704
- Simulate IO exceptions in the test using FlacBinarySearchSeeker for
seeking in FlacExtractorTests. This makes the test slower but covers
more test cases.
PiperOrigin-RevId: 288285057
There's currently no rendering support for ruby text in SubtitleView
or SubtitlePainter, but this does have a visible impact with the
current implementation by stripping the ruby text from Cue.text
meaning it doesn't show up at all under the 'naive' rendering.
This is an improvement over the current behaviour of including
the ruby text in-line with the base text (no rubies is better than
wrongly rendered rubies).
PiperOrigin-RevId: 288280416
This typo was introduced in ddb70d96ad
when migrating a static method with parameter `durationUs` to an
instance method where the correct field to use was `blockDurationUs`
(but `durationUs` also exists).
The test that catches this was only added in 45013ece1e (and
therefore configured with the wrong expected output data).
issue:#6833
PiperOrigin-RevId: 288274197
I decided the flags bit was a bit unclear so I played around with this
It's also needed for more 'complex' assertions like colors - I didn't
want to just chuck in a fourth int parameter to create:
hasForegroundColorSpan(int start, int end, int flags, int color)
PiperOrigin-RevId: 287989424
Relying on the precedence of spans seems risky - I can't find it
defined anywhere. It might have changed in Android 6.0?
https://stackoverflow.com/q/34631851
PiperOrigin-RevId: 287989365
-- Optimize Mp4Extractor for AC-4
-- Optimize FragmentedMp4Extractor for AC-4
-- Add test case for AC-4 in MP4
-- Add test case for AC-4 in Fragmented MP4
An experiment with this algorithm didn't show positive results. We can
therefore keep the simpler default algorithm.
Startblock:
<unknown commit> is submitted
PiperOrigin-RevId: 287807538
The Download constructor considers it invalid to have a failure
reason if the download isn't in the failed state. Unfortunately,
calling DefaultDownloadIndex.removeAllDownloads when there's a
failed download will change the state without clearing the reason.
If the downloads are then read back from the DefaultDownloadIndex
we end up violating the Download constructor assertion.
This change clears the failed reason for any existing rows in the
invalid state, and also fixes the root cause that allows invalid
rows to enter the table in the first place.
Issue: #6785
PiperOrigin-RevId: 286576242
This class is only used to hold temporary data while we parse the
settings and text, so we don't need it outside the Parser class.
Also remove all state from WebvttCueParser - this increases
the number of allocations, but there are already many
and subtitles generally aren't very frequent (compared to
e.g. video frames).
PiperOrigin-RevId: 286200002
*** Original commit ***
Move getting-stuck-prevention into DefaultLoadControl.
We recently added code that prevents getting stuck if the buffer is low and
the LoadControl refuses to continue loading (b84bde0252).
Move this logic into DefaultLoadControl to keep the workaround, and also apply the
maximum buffer size check in bytes if enabled. ExoPlayerImplInternal will now
throw if a LoadControl lets playback get stuck. This includes the case where
DefaultLoadControl reaches its maximum buffer size and not even a mim...
***
PiperOrigin-RevId: 286071115
We recently added code that prevents getting stuck if the buffer is low and
the LoadControl refuses to continue loading (b84bde0252).
Move this logic into DefaultLoadControl to keep the workaround, and also apply the
maximum buffer size check in bytes if enabled. ExoPlayerImplInternal will now
throw if a LoadControl lets playback get stuck. This includes the case where
DefaultLoadControl reaches its maximum buffer size and not even a mimimal buffer
duration.
PiperOrigin-RevId: 285979989
This offset allows to improve the calculated live offset because it
can take known client-server time offsets into account.
PiperOrigin-RevId: 285970738
I want to add fields related to vertical text support, and neither
adding another constructor nor updating all call-sites of existing
constructors seemed like attractive propositions.
PiperOrigin-RevId: 285956024
