The EventTime wasn't part of the onEvents callbacks so far because the
individual events may have different event times (e.g. if they relate to
different media periods). By adding a query method to obtain the
EventTime by event type, we can solve this issue.
#exofixit
PiperOrigin-RevId: 343818819
Mentioning the realtionship on every other callback makes
it easier for the casual developer to understand the
relationship between the methods and discover the existence
of onEvents.
PiperOrigin-RevId: 343811032
Previously, VideoFrameReleaseTimeHelper didn't receive PTS values for
frames that were skipped. This would lead to unnecessary sync loss when
encountering such buffers, because the helper would see a frame-rate
change (i.e., the next frame being significantly longer than previous
ones). After this change, VideoFrameReleaseTimeHelper is notified of
all frame PTS values, so it can retain sync in this case.
This change also propagates onStarted and onPositionReset to the helper.
This paves the way for decoupling frame-rate estimation from release
adjustment sync. Note that currently, loss of sync effectively resets
both. This is unnecessary. For example, if the renderer is paused and
later resumed, then release adjustment sync needs to be reset, but any
frame-rate estimate we have is still valid.
PiperOrigin-RevId: 343803531
*** Original commit ***
Update Styled non bottom buttons to be borderless.
This requires the parent of the background to draw and have padding large enough to support the size of the ripple.
The bottom buttons must remained bordered as the space around them is constrained.
***
PiperOrigin-RevId: 343531411
RunnableFutureTask is not reusable. Trying to reuse it meant that a
failure in one doWork() call would cause subsequent download() calls
to (a) not block until the runnable has finished executing (does not
apply when using a direct executor), and (b) throw the same failure
as thrown from the first doWork() call.
This could cause #8078 if the initial failure occurred before the
content length was resolved. Retries are not blocked on their work
completing due to (a), and the download would be marked as failed due
to (b). The work itself could then resolve the content length, which
causes the stack trace in this issue.
Issue: #8078
PiperOrigin-RevId: 343498252
This callback allows listeners to know when all simultanous changes
have been handled and the values reported through callbacks are
again completely consistent with value obtained from Player
getter calls.
PiperOrigin-RevId: 343476639
When a stream has duplicate timestamps we currently discard to
the last sample with the specified discardTo timestamp, but
it should be the first one to adhere to the method doc and the
intended usage.
#minor-release
PiperOrigin-RevId: 343458870
Background:
1. When the player has multiple audio renderers, by default they share a
single AudioSink.
2. When any new renderer is enabled, all disabled renderers are reset
prior to the new renderer being enabled. This is to give them a chance
to free up resources in case the renderer being enabled needs them. These
reset calls are expected to be no-ops for renderers that have never been
enabled.
The issue:
The problematic case arises when there are two audio renderers and a third
renderer (e.g., text) is being enabled. In this case, the disabled audio
renderer's reset call ends up resetting the AudioSink that's shared with the
enabled audio renderer. The enabled audio renderer is then unable to make
progress, causing playback to freeze.
This is a minimal fix that directly prevents the mentioned issue. There are
multiple follow-ups that would probably make sense:
1. Having ExoPlayerImplInternal track which renderers need to be reset, and
only resetting those renderers rather than all that are disabled. This
seems like a good thing to do regardless, rather than relying on those
calls being no-ops.
2. If we want to continue sharing AudioSink, we need to formalize this much
better and make sure we have good test coverage. Messages like
MSG_SET_VOLUME are also delivered to the AudioSink multiple times via
each of the renderers, which works currently because DefaultAudioSink
no-ops all but the first call in each case. This is pretty fragile though!
Issue: #8203
#minor-release
PiperOrigin-RevId: 343296081
Real apps probably aren't going to be allowing playback speed to be
set to anything other than the options listed in their UI, and so
this is not worth the complexity.
It also violates the idea that the UI should look the same regardless
of when the player is set on the view, since if it's set and then the
playback speed is changed to a listed option then the custom speed
remains, where-as if the speed is changed to a listed option and then
it's set, the custom speed will not be shown.
PiperOrigin-RevId: 343260450
*** Original commit ***
Suppress warnings in preparation for Checker Framework 3.7.1 upgrade.
LSC: go/checker-lsc
Tested:
tap_presubmit: http://test/OCL:342788975:BASE:342885903:1605667635149:7731b723
Some tests failed; test failures are believed to be unrelated to this CL
***
PiperOrigin-RevId: 343251530
ExoPlayer's traditional HLS preparation works by loading a chunk from each track
group, and then tries to use the sample information plus the master playlist
information to generate the preparation's resulting TrackGroups.
There are 3 possible scenarios:
- Supported case: Each variant has a single codec string per track type. We can
assign each track the codec string which matches the loaded sample's type.
- Supported case: Each variant has more than one codec string, but each track
group has a single track. This is the case when different languages use
different codecs. In this case, we can assign whichever codec matches the
loaded sample's mime type.
- Unsupported case: Each variant has more than one codec string, and track
groups contain more than one track. We are not able to safely map tracks to
codec strings because that would require loading a chunk from each track
(which would considerably delay preparation).
Broken in:
4783c329cc
PiperOrigin-RevId: 343072201
This only has a couple of simple tests for now. We'll add more tests
after we've written some concrete sub-class tests for various
DataSource implementations.
I've included a concrete FileDataSourceContractTest as a demonstration.
PiperOrigin-RevId: 342851187
This ensures the buffer is not full when the `DefaultLoadControl` determines
whether we should continue loading and thus prevents a false warning about
not having enough memory left.
PiperOrigin-RevId: 342616623
This requires the parent of the background to draw and have padding large enough to support the size of the ripple.
The bottom buttons must remained bordered as the space around them is constrained.
PiperOrigin-RevId: 342162231
Add experimental method to synchronize MediaCodec interactions
with asynchronous queueing. When the feature is enabled, interactions
such as MediaCodec.setOutputSurface() triggered by the
MediaCodecRenderer will wait until all input buffers pending queueing
are first submitted to the MediaCodec.
PiperOrigin-RevId: 341423837
To check what is safely possible we keep track of the live offset
corresponding to the buffered duration and only deecrease the
target offset to a safe margin from the buffered duration.
Also, while still possible (i.e. while the actual offset is larger
than the safe margin), we increase the target offset to the safe
margin to avoid rebuffers to start with.
Issue: #4904
PiperOrigin-RevId: 341396492
Add more MediaCodec methods to MediaCodedAdapter so that renderers
interact with the MediaCodec through the MediaCodecAdapter.
PiperOrigin-RevId: 341023452
- This change removes the last piece of logic that could cause deferred
codec release (i.e., where the decision to release was made in
processEndOfStream rather than in onInputFormatChanged.
- After this change, whether the codec will be released as a result of
a format change is always established in onInputFormatChanged.
PiperOrigin-RevId: 341012403
This fixes a case where updateCodecOperatingRate would configure
the decoder to be drained and then released, only for
onInputFormatChanged to override the drain action with something
else.
We've not seen any reports of this issue, which suggests that either
it's OK to not release the decoder in such cases, or that the
case doesn't happen very often. I suspect that it's both, but let's
restore the intended behaviour for now.
PiperOrigin-RevId: 340909132
This information is already available in the MappingTrackSelector,
but not currently forwarded to the TrackSelection.Factory.
This makes it more complicated (or impossible) to depend on period
or manifest information in the track selection (for example to only
select tracks which are cached for the current format).
PiperOrigin-RevId: 340605886
In a later change, the AdPlaybackState will include the playing adsId (set by
the AdsLoader) and the ads loader will use this to determine what ad
information is associated with the playing/next periods, to allow loading ads
in playlists.
Apps can continue to pass just a URI for an ad tag with their MediaItem, in
which case the associated playlist will request that ad tag just and the same
state will be used for all occurrences of the ad tag.
This change has breaking changes to the AdsLoader interface and removes
deprecated ways of passing the ad tag, as it's very likely to go into a major
release anyway and not needing to handle the deprecated cases simplifies
ImaAdsLoader.
Issue: #3750
PiperOrigin-RevId: 340438580
By default methods File.makeDir() and File.makeDirs() can return 'false' if file aleady exists or can not be created. Such silent ignore of the situation propagates misbehavior to the caller: CacheDataSink#173 : new FileOutputStream(file). And then it throws not correct exception type 'FileNotFoundException'. While correct exception should be 'no space left on the device'.
This can be fixed only with 'Files.createDirectories()' method that throws correct exception type.
1. Move logic to decide to re-initialize the codec rather than using
MediaCodec.setMediaDrmSession if (a) PlayReady is in use, and (b)
the new session is still provisioning. This would previously have
happened asynchronously after an input format change, after the
decoder has subsequently been flushed. After this change the logic
executes synchronously when the input format changes. This helps
with the ref'd bug, since we want to propagate reasons for codec
re-initialization through inputFormatChanged events.
2. Whilst moving the logic for re-initialization if PlayReady is
being used, I fixed a bug that would occur when switching from
[PlayReady --> non-PlayReady]. Re-use doesn't work in this case.
The old logic only checked for the [Something --> PlayReady] case.
3. Remove pointless codec flush if updating the DRM session having
not queued anything to the codec.
PiperOrigin-RevId: 340299790
- I don't think the session recovering later would work, because
the codec will be configured not to use it.
- I'm not sure session recovery makes sense in general, and our
implementations do not do this. Document it as a terminal state
for now.
PiperOrigin-RevId: 340204194
This avoids confusion that currently exists between "operating rate"
and "codec operating rate", which are different. It also tightens the
requirement of the value being passed to be more than a "hint". It's
already being used as more than a hint for setting the Surface frame
rate.
PiperOrigin-RevId: 340201829
Some content types always provide the license URL in the media.
The PlayReady example in the demo app doesn't provide a default
license URL for this reason, as an example.
#minor-release
PiperOrigin-RevId: 340125784
This change will be followed up by:
- Changes adding APIs to enable the use of MediaParser in each of the supported
media sources.
- Changes removing TODOs related to the change of the stable SDK to API 30.
PiperOrigin-RevId: 339556777
In order to ensure we can update the values for new manifests but still use
the user provided override, we need to save the original and the updated MediaItem
seperately.
And in order to incorporate the existing logic for the min/max supported live
offset, which we already use to correct the target offset, also move both places
together so that all the adjustment happens in one place.
Logical adjustments to the previous min/max supported live offset:
- Use the user-provided MediaItem values if set
- Use the newly parsed ServiceDescription values if available.
- Limit the minimum to 0 if the current time is in the window and we can
assume to have low-latency stream.
- Add minBufferTime from the manifest to ensure we don't reduce the live
offset below this value.
Issue: #4904
PiperOrigin-RevId: 339452816
Logic for determining if (and how) decoders can be adapted is
currently split between renderers and MediaCodecInfo. This change
centralizes the majority of the logic in MediaCodecInfo.
This change also fixes a bug in MediaCodecAudioRenderer when computing
max values for the codec. Previously, max values would not be increased
to account for potential adaptation to another stream in the case that
the codec needs to be flushed for the adaptation to occur.
PiperOrigin-RevId: 339133416
Refactor the AsynchronousMediaCoderAdapter and move the callback thread
out of the adapter so that implementation of async callback and and
async queueing are consistent design-wise.
PiperOrigin-RevId: 338637837
This change fixes format creation for traditional preparation of streams
where the master playlist contains more than one codec string per track
type.
Issue: #7877
PiperOrigin-RevId: 338538693
When disabling a TsExtractor track type because of a missing codec
in the master playlist, look through the entire codecs string
instead of checking the first codec with matching type.
Issue: #7877
PiperOrigin-RevId: 338530046
The current caluclation was comparing Unix time with period time.
Fix it by always comparing against period time.
Issue: #4904
PiperOrigin-RevId: 338235754
We currently implicitly rely on the internal playback thread to not send
new updates after the player got released. This may not always be ensured
since we let the release call timeout. For the timeout case, there may
still be a pending operation returning much later when it unstuck itself.
Fix this and potential other edge cases by explicitly removing all listeners
and preventing new listeners from being added after the release.
PiperOrigin-RevId: 338217220
Skip assets with >2 audio channels - this isn't
currently supported by ShadowAudioSystem. I'll add these when support is
available.
Also skip sample_ac4_protected.mp4 because DRM isn't supported in this
test environment either.
PiperOrigin-RevId: 338023738
I added the TS playback tests for these assets without adding support
for the relevant MIME types to ShadowMediaCodec.
Also remove test assets with more than 2 audio channels - this isn't
currently supported by ShadowAudioSystem. I'll re-add these when support
is available.
PiperOrigin-RevId: 338023290
The available duration used a "live edge" that was calculated in
the previous iteration and was thus quite old. Also it also used
the end of the last available segment, but the actually available
duration for buffering needs to be clamped to the current live edge
for low-latency streams.
Issue: #4904
PiperOrigin-RevId: 337812621
ExoPlayerImpl and CastPlayer repeat the same logic. Moving the listener
and event handling to a common util class allows to reuse the same code
and add unit tests for this logic.
The change is a functional no-op.
PiperOrigin-RevId: 337812358
This was causing issues old devices where the class
inheriting StreamEventCallback was loaded even though
it was not used.
Instead use an anonymous class that seem to be loaded
more lazily.
PiperOrigin-RevId: 337252687
The 'implementation' dependency causes problems when resolving
ListenableFuture in contexts that also include the
com.google.guava:listenablefuture:1.0 dependency.
Issue: #7905
Issue: #7997
Issue: #7993
PiperOrigin-RevId: 337093024
This moves TestUtil#runMainLooperUntil and
TestUtil#createRobolectricConditionVariable to a new RobolectricUtil
class.
Also move testutil classes that use Robolectric-related utils classes
(e.g. TestPlayerRunHelper, TestDownloadManagerListener).
PiperOrigin-RevId: 336864959
1. The first time the player controls are are made visible,
there is no animation.
2. The first time the player controls are made visible, the
"select tracks" button isn't displayed. When tapping to
subsequently hide the player controls, the button briefly
becomes visible and then is hidden again. This bug is due
to state in StyledPlayerControlViewLayoutManager being
out of sync, resulting in StyledPlayerControlView's
onVisibilityChange not being called properly.
After this change both of these issues should be resolved.
PiperOrigin-RevId: 336704031
We stopped using using this MIME type in
74a9d8f680
This broke subtitle decoding in some cases (Issue: #7985), which I
fixed in
7b8895d655.
After some discussion we've decided SubtitleDecoderFactory shouldn't
depend on Format.containerMimeType (since the samples have already been
extracted by this point, so the container shouldn't matter). So this
change fixes DashManifestParser to use MimeTypes.APPLICATION_MP4VTT (and
reverts the no-longer-needed SubtitleDecoderFactory change).
PiperOrigin-RevId: 336668450
TestExoPlayerBuilder can be used from both emulator and robolectric
tests, TestPlayerRunHelper uses Robolectric Looper behaviour, meaning
it can be moved to the robolectricutils module in a follow-up change.
PiperOrigin-RevId: 336634225
Adjusted the bottom layout of StyledPlayerControlView :
- Enlarged bottom button's height to make tapping easier.
- Extended greyed background area to upper edge of seekbar.
- Gave padding between bottom edge of the overall layout and bottom buttons.
- Reduced horizontal margins between bottom buttons.
PiperOrigin-RevId: 336041160
Previously, the overflow button was always shown at the bottom in StyledPlayerControlView
and hided the settings cog even when there is enough space.
With this change, the settings cog moves out from overflow and
the overflow button is shown only when the buttom space is not enough.
PiperOrigin-RevId: 336029179
Experiments showed the timeout is beneficial to avoid ANRs and
we can thus enable the feature by default.
Also add configuration to set the timeout if required.
Issue: #5887
PiperOrigin-RevId: 335652506
Using a timeout prevents ANRs in cases where the underlying platform
gets blocked forever, so we enable this feature by default.
Issue: #4352
PiperOrigin-RevId: 335642485
This is in preparation for supporting playlists of ads media sources using
ImaAdsLoader.
Existing ways of passing ad tags should still function but are deprecated (and
won't be supported with playlists).
Issue: #3750
PiperOrigin-RevId: 335618364
`subtitle` is only guaranteed to be non-null if
`nextSubtitleEventIndex != C.INDEX_UNSET`. The null check added in
0efec5f6c1
was too early.
Issue: #8017
PiperOrigin-RevId: 334777742
This was broken by 74a9d8f680
because DashManifestParser switched to setting Format.sampleMimeType to
text/vtt while SubtitleDecoderFactory was still expecting
application/x-mp4-vtt. This change teaches SubtitleDecoderFactory to
check both Format.containerMimeType and Format.sampleMimeType.
I'll investigate a follow-up change to remove
MimeTypes.APPLICATION_MP4VTT completely (it's currently still used in
AtomParsers).
Issue: #7985
PiperOrigin-RevId: 334771672
In the test, a real instance of SimpleExoplayer plays two identical Mp3 files.
The GaplessMp3Decoder will write randomized data to decoder output on receiving
input. The test compares the bytes written by the decoder with the bytes
received by the AudioTrack, to verify that the trimming of encoder delay/
padding is correctly carried out.
Test mp3 has delay 576 frames and padding 1404 frames. File generated from:
ffmpeg -f lavfi -i "sine=frequency=1000:duration=1" test.mp3
This change needs robolectric version 4.5, which is not currently released (2020 Sep 30).
PiperOrigin-RevId: 334648486
When I moved ParsableByteArray#data behind a getter I replaced some
assignments with calls to reset(byte[]):
ce2e6e2fd6
reset(byte[]) deliberately sets `limit` to `data.length`, in order to
handle cases that were reassigning `data` but not updating `limit`.
However OggPacket was already using `limit` to track where to write
'new' data into the array, so changing `limit` to `data.length` caused
us to try and write new data beyond the end of the array.
I looked at other uses of reset(byte[]) in ce2e6e2fd6
and condluded the only other usage in MatroskaExtractor is legit and
shouldn't be updated like this (because MatroskaExtractor previously
*wasn't* correctly updating/maintaining `limit`).
Issue: #7992
PiperOrigin-RevId: 334601586
Non-realtime AudioTrack playback speed was not taken into account when
extrapolating the old mode's position, causing the position not to
advance smoothly.
This should be a no-op when not using AudioTrack playback params for
speed adjustment.
Issue: #7982
PiperOrigin-RevId: 334151163
Remove the SynchronousMediaCodecBufferEnqueuer interface
since we only keep the AsynchronousMediaCodecBufferEnqueuer
implementation.
PiperOrigin-RevId: 333701115
Retry AudioTrack init and write for 100ms before
giving up and aborting playback.
This was tested by throwing every 2 init/write and
making sure playback did not stopped.
#exo-offload
PiperOrigin-RevId: 333536841
This issue has been observed on a test app stress
testing setEndOfStream.
The issue has not been observed on ExoPlayer,
probably due to timing differences, but it is fixed
preventively.
#exo-offload
PiperOrigin-RevId: 333472136
This seems to be an exact copy of sample.adts. Update the test to use
the same sample but just output to a different dump file.
PiperOrigin-RevId: 333469714
We have a workaround for uneven sample stream durarions in playlists that
assumes a renderer allows playback if it's reading ahead or waiting for
the next stream.
652c2f9c18 changed this logic to no longer require to
wait until the next stream is prepared due to a change in how we advance
media periods in the queue. However, the code falsely still requires the
next stream to exist (even if it's not prepared). This can cause a stuck
buffering state when the difference in the duration of the streams is more
than what we buffer ahead because we never create the next stream in such
a case.
Note: DefaultMediaClock.shouldUseStandaloneClock has roughly the same logic
and also doesn't require the next stream to be present.
Also fix a test that seemed to rely on this stuck buffering case to test
stuck buffering detection. Changed the test to not read the end of stream
to ensure it runs into the desired stuck buffering case.
Issue:#7943
PiperOrigin-RevId: 333050285
This allows to use the same logic from multiple places without duplicating
it, encapsulates in its logical place, and allows to change the available
segments based on the new availabilityTimeOffset value.
The overall effect of this change is a no-op.
PiperOrigin-RevId: 333044186
Without this patch, playback would be frozen indefinitely
until the user manually pauses and unpauses it.
This has the side effect of disabling offload until
the next stop due to the workaround of
disabling offload when it encounters a failure.
As an audio server crash is considered very
infrequent, especially in stable conditions like
an audio only playback, it is unlikely that disabling
offload is an issue.
PiperOrigin-RevId: 332857094
I didn't copy-paste the whole of
https://github.com/google/guava/wiki/UsingProGuardWithGuava because
this line seems relevant based on our current usage.
Lots of that file seems to relate to classes that are strongly
discouraged on Android:
https://github.com/google/guava/wiki/Android#specifics
I've only added this to the `common` module, since everyone that uses
ExoPlayer must depend on that. This avoids duplicating this line into
every module that has a Guava dependency.
Also remove some other warning suppressions that are defined in both
`core` and `common`.
Issue: #7904
PiperOrigin-RevId: 332203086
This value is needed to figure out the last available segment for
low-latency live streaming. It may be present in each BaseURL tag
and each SegmentList or SegmentTemplate, with the latter one taking
precedence.
The value is saved as part of MultiSegmentBase where it will be used
to retrieve the last available segment index in future changes.
PiperOrigin-RevId: 331809871
This test is intended to check that DefaultLoadControl will cause
playback to fail as "stuck buffering" rather than OOM-ing, in the
case that its target buffer size is reached and playback still
hasn't started.
Unfortunately, the target buffer size is ~130MB, and when running
on some setups an OOM actually ends up happening before this much
memory is allocated.
This change makes the target buffer size much smaller to avoid the
problem.
PiperOrigin-RevId: 331748208
