This change removes ERROR_CODE_IO_NETWORK_UNAVAILABLE,
ERROR_CODE_IO_NETWORK_CONNECTION_CLOSED, and ERROR_CODE_IO_DNS_FAILED
in favor of keeping only ERROR_CODE_IO_NETWORK_CONNECTION_FAILED.
PiperOrigin-RevId: 388715972
The AnalyticsCollector releases listeners lazily so that listener
callbacks triggered on the application looper after
SimpleExoPlayer.release() are still handled. The change in ListenerSet
to post the onEvents callback on the front of the application looper
changed (correctly) how onEvents are propagated, however this made
the AnalyticsCollector deliver onEvents with out-of-order EventTimes.
This change fixes AnalyticsCollector to trigger onPlayerReleased() and
the matching onEvents() event in the correct order.
#minor-release
PiperOrigin-RevId: 388668739
- Use timestampOffsetUs == C.TIME_UNSET directly as the way of
determining whether the adjuster has determined the offset,
rather than relying on lastSampleTimestampUs checks for this.
- Remove comment referring to lastSampleTimestampUs as holding
the "adjusted PTS". Its value may not have originated from a PTS
timestamp. It's also confusing to refer to it as "adjusted"
given timestampOffsetUs has not been applied to it.
- Fix PassthroughSectionPayloadReader to make sure it'll never
output a sample with an unset timestamp.
#minor-release
PiperOrigin-RevId: 388226180
Prior to this change, an initalized TimestampAdjuster that's then
reset with DO_NOT_OFFSET would incorrectly continue to apply the
offset.
Also add a test case for this issue, and for some other simple use
cases.
#minor-release
PiperOrigin-RevId: 388182645
DefaultHttpDataSource and OkHttpDataSource can share the same error code
assigning logic.
Fixes CronetDataSource's handling of closed connection.
PiperOrigin-RevId: 387791679
The dokka javadoc generation tool complains when parameter names don't match between a method and its override. This change updates occurrences where there is currently a mismatch.
PiperOrigin-RevId: 387367509
The dokka javadoc generation tool complains when parameter names don't match between a method and its override. This change updates occurrences where there is currently a mismatch.
Notable renamings that might be controversial:
- `onPlaybackStateChanged(int state)` to `onPlaybackStateChanged(int playbackState)` affected a lot of lines but seems more consistent with other '-Changed' methods.
- `handleMessage(int messageType, Object payload)` to `handleMessage(int messageType, Object message)`
- `ExtractorInput` and `DataSource` inherit `DataReader` which had `read(byte[] target, ...`, while data sources normally called the first parameter `buffer`. I have standardized these all to use `buffer` even though it looks out of place in the `ExtractorInput` interface (which has more `read` methods with `target`).
PiperOrigin-RevId: 387290360
The documentation on ByteArrayOutputStream and GZIPOutputStream isn't
completely clear that an IOException will *never* happen, so
AssertionError seems a bit strong - but it seems very unlikely, so we
just use IllegalStateException instead.
#minor-release
PiperOrigin-RevId: 387169297
The inference is used when nesting DataSourceExceptions. It is removed because
nesting does not add additional value in surfacing the exceptions, and it is
better to assign an error code at the throw site (in the "leaf" or the bottom
most data source).
PiperOrigin-RevId: 386919118
In some DataSources, it is not easy to assign an error code at the throw site.
For example, CronetDataSource.readInternal() throws SocketTimeoutException
on L1033, and is caught at L754 as IOException and is thrown.
We need the logic to assign error code for the actual type of the error cause.
While we can certainly do in individual DataSources, IMO there's value in
making this logic generic at a higher level (like what is in this CL).
The catch and translation logic is borrowed from EPII:L646.
PiperOrigin-RevId: 385789629
Also rename hasPrevious/Next to hasPrevious/NextWindow for consistency.
This makes it clearer what the difference between
seekToPrevious/NextWindow and seekToPrevious/Next is.
PiperOrigin-RevId: 384643373
Applications may need to pass a non-visual context when creating
a DefaultTrackSelector (e.g., because they're audio-only or are
creating the selector in a background service).
Obtaining the default display via DisplayManager avoids the strict
mode violation that occurs when retrieving it via WindowManager.
#minor-release
PiperOrigin-RevId: 384487363
Most of the super-interfaces are deprecated, but the intention is that
only the types are deprecated and the methods themselves shouldn't be.
In order to reflect this in javadoc we override all the methods in
`Player.Listener` in order to 'cancel' the deprecation.
This change deliberately doesn't override methods that are explicitly
deprecated with documented replacements (like
`Player.EventListener#onPlayerStateChanged`) - these should contine to
be marked as deprecated in javadoc.
PiperOrigin-RevId: 384253725
The types (open/close/read) does not provide extra information about the thrown
playback exception, and they are not utilized at higher levels.
PiperOrigin-RevId: 384219870
The parameters staying in DefaultTrackSelector are considered
too ExoPlayer specific to be part of the `Player` interface.
Those are:
- exceedVideoConstraintsIfNecessary;
- allowVideoMixedMimeTypeAdaptiveness;
- allowVideoNonSeamlessAdaptiveness;
- exceedAudioConstraintsIfNecessary;
- allowAudioMixedMimeTypeAdaptiveness;
- allowAudioMixedSampleRateAdaptiveness;
- allowAudioMixedChannelCountAdaptiveness;
- disabledTextTrackSelectionFlags;
- exceedRendererCapabilitiesIfNecessary;
- tunnelingEnabled;
- allowMultipleAdaptiveSelections;
- rendererDisabledFlags
Track selection override will be migrated in a follow up cl.
To avoid breaking backward compatibility,
`DefaultTrackSelector.Parameters` extends
`TrackSelectionParameters` and
`DefaultTrackSelector.ParametersBuilder` extends `TrackSelectionParameters.Builder`.
The change are thus transparent for clients.
Test are incomplete for now, as this is a relatively big cl, I though
the reviewer could give a first pass will the tests are completed.
PiperOrigin-RevId: 383767021
The serialization scheme used here is custom, it doesn't need
to be compatible with emsg-v0 or emsg-v1 (since
97183ef558).
This means that C.TIME_UNSET will propagate correctly through the
serialization.
#minor-release
Issue: #9123
PiperOrigin-RevId: 382762873
- Use `PlaybackException.ErrorCode` IntDef for `DataSourceException` error code
- Deprecate `DataSourceException.POSITION_OUT_OF_RANGE`
- All other changes are related to replacing the deprecated constant and
constructor
PiperOrigin-RevId: 382683522
In order to use it for error code assignment. Note that these DRM errors
could be thrown on API < 18 (from MediaCodec.CryptoException), which is
the reason we can't put the mapping in FrameworkMediaDrm.
PiperOrigin-RevId: 382512414
Currently when a HTTP POST request receives a 302, CronetDataSource will change the request method from POST to GET for the redirected request, and drop the post body. This aligns with the behaviours of many user agents, but our use case would like to keep the POST method and the post body.
org.chromium.net.UrlRequest.followRedirect also changes POST to GET for 302, so should be avoided here.
PiperOrigin-RevId: 381233011
More information: go/checker-3130-lsc
Tested:
Some test failures are present, but the CL author has decided to mail the change anyway
PiperOrigin-RevId: 379622938
As of [JDK-8247957](https://bugs.openjdk.java.net/browse/JDK-8247957), doclint
no longer supports html4.
Tested:
Some test failures are present, but the CL author has decided to mail the change anyway
PiperOrigin-RevId: 378819179
`SurfaceTexture` provides a transform matrix with each buffer. Previously
gldemo ignored this but it is important to apply it to have the video render
properly.
The transformation matrix from the surface texture includes flipping so this
change removes the hard-coded flipping from `a_texcoord`.
Issue: #8992
#minor-release
PiperOrigin-RevId: 377271389
This helps to remove old ad groups (e.g. those that fell out
of the live window) to keep the data size of AdPlaybackState small.
Also added this case to some existing unit tests to ensure it's
covered.
PiperOrigin-RevId: 376170653
This allows to decouple the data structure from the access. In
a future change, this allows to completely remove old ad groups
(e.g. for live streams where the number of groups would otherwise
grow forever).
Also move the time into the group itself for better encapsulation.
PiperOrigin-RevId: 376170408
Many of the setters are ignored unless others are set - this change:
* Lists these conditions exhaustively.
* Uses more concise language to avoid overshadowing the main details
of what the setter sets.
* Tweaks the language from 'is ignored' to 'shouldn't be called', to
open up the future possibility of throwing an error if these are
called without the 'required' setter also being present (see
Issue: #8957).
#minor-release
PiperOrigin-RevId: 376162385
The docs on setLicenseUri say it's optional, and it has been since
379cd8a04f
(which should have changed this javadoc too)
#minor-release
PiperOrigin-RevId: 376139158
It only covers MediaSession - MediaController
(Does not consider cases that either a legacy session or a legacy controller is involved)
Add PlayerInfo#Builder to clean it up.
PiperOrigin-RevId: 374785779
Notes:
- The only functional change is that createForRemote now assings ERROR_CODE_REMOTE_ERROR.
- createForSource still uses ERROR_CODE_UNSPECIFIED, even though it expects an
IOException. The reason for not using ERROR_CODE_IO_UNSPECIFIED is that the reason for
the error might not be IO. For example, malformed media, or BehindLiveWindowException,
which have non-IO error codes. So using UNSPECIFIED saves a later change in category.
PiperOrigin-RevId: 374390407
When working with SSAI ads, we need to easily convert positions between
the underlying stream and the media model that exposes ad groups. To
simplify this, we can add util methods (that are testable on their own).
In addition, we need an easy way to build AdPlaybackStates for SSAI
inserted ads. The metadata is obtained out-of-band and usually has the
ad group start and end times in the underlying stream only. Hence, we
also add a util method to add a new ad group based on this information.
PiperOrigin-RevId: 374369360
MediaSession default command state contains all
commands.
To avoid having to update MediaSession when a command
is added, allow to create a Commands.Builder that
starts with all commands.
PiperOrigin-RevId: 374183484
Make ForwardingPlayer implement Player and not extend BasePlayer so that
ForwardingPlayer forwards each Player method directly to the wrapped
Player instance.
PiperOrigin-RevId: 374161084
There are two main changes that need to be made:
1. Whenever we determine the next ad to play, we need to select a
server-side inserted ad even if it has been played already (because
it's part of the stream).
2. When the Timeline is updated in the player, we need to avoid changes
that would unnecessarily reset the renderers. Whenever a Timeline
change replaces content with a server-side inserted ad at the same
position we can just keep the existing MediaPeriod and also if the
duration of the current MediaPeriod is reduced but it is followed by
a MediaPeriod in the same SSAI stream, we can don't need to reset
the renderers as we keep playing the same stream.
PiperOrigin-RevId: 373745031
Content after ad groups currently always resumes at the ad break position (unless
overridden by a seek or similar). In some cases, media inserting ads wants to
specify an offset after the ad group at which playback should resume. A common
example is a live stream that inserts an ad and then wants to continue streaming
at the current live edge.
Support this use case by allowing ad groups to specify a content resume offset
and making sure that the content start position after the ad group uses this offset.
PiperOrigin-RevId: 373393807
