It's used by the UI and mediasession modules. We may be able to move
it into the UI module if/when the mediasession module goes away.
PiperOrigin-RevId: 356734939
ControlDispatcher and DefaultControlDispatcher also need
to move to common for the UI module. As does PlaybackPreparer,
although that will be removed entirely in a future release.
PiperOrigin-RevId: 356467394
Also allow the player's prepared ad media period durations array to exceed the
length of the loaded ad URIs array, as it's possible for the player to buffer
an ad media period fully at the point where it's known that an ad is coming up
but its URI is still unknown.
#minor-release
PiperOrigin-RevId: 356249284
We currently block the loading thread until the calculated load
time has past and then unblock again by a message sent from the
playback thread. However, because the loading thread itself is not
using a Looper and runs freely, we don't control when the short
calculations on the loader thread that determine how long we have
to wait are happening, and we also don't control how long it takes
to start and stop this thread.
To solve these problems and to make the playback deterministic we
can
1. Send a message on the playback thread to block until the loader
thread has started.
2. Block the playback thread whenever a loading thread is doing its
short calculation of wait times. The playback thread knows when it
can continue because loading either enter a new waiting state for
a simulated load time or loading is finished completely.
3. Also wait on the playback thread until the loader has shut down.
As this is waiting for a message on the playback thread, we can
achieve this by sending messages to ourselves at the current time
until the loader is shut down.
All 3 steps together ensure that the loading thread interaction is
compeltely deterministic when simulating bandwidth profiles with the
BandwidthProfileDataSource. As we need to notify the source before and
after the load started/finished, we also need a small wrapper for the
chunk source when running the playback.
PiperOrigin-RevId: 355810408
- When throwing a recoverable error from a renderer, it's important to understand
exactly how the player will attempt recovery. Clarify the documentation to
make this explicit.
- Rename some methods/constants to make it clear that error recovery is specific
to renderer errors. The current recovery mechanism only makes sense for
renderer errors. Making the naming renderer specific avoids reader doubt that
the implementation doesn't appear to be generic enough for other types of
errors.
PiperOrigin-RevId: 355650945
It's for classes to clearly denote they support bundling and it gives
us a good place to document the best practice to implement fromBundle.
PiperOrigin-RevId: 355609942
Before, the level was set to null in this case.
MediaCodecUtil.getCodecProfileAndLevel() was therefore returning null
and the fallback to AVC/HEVC was not enabled in MediaCodecVideoRenderer.
Issue:#8530
#minor-release
PiperOrigin-RevId: 355574499
This also moves DefaultHttpDataSource to common, which seems
sensible, else non-player components that need a DataSource
don't have any useful concrete implementations. We should
think about moving some of the other concrete implementations
to common as well.
PiperOrigin-RevId: 354738925
This is achieved by only triggering one message at a time. After
triggering a message we send another to ourselves to know when the
following message can be triggered.
Other required changes:
- The messages need to be sorted correctly (by time and creation order)
- To prevent deadlocks when one thread is waiting for another,
we need to add new method to Clock to indicate that the current
thread is about to wait. This then allows us to trigger messages
from other threads in FakeClock.
- AnalyticsCollectorTest needed some adjustments:
- onTimelineChanged now deterministically arrives after the initial
timline is already known, so some of the period information changes
from window only to full period info.
- The playlistOperations test suffers from a bug that the first frame
is rendered too early and that's why we now get additional events.
PiperOrigin-RevId: 353877832
Currently only delayed messages are handled. Change this to handling
all messages so that we have more control over their execution order.
This requires adding a new wrapper type for the Message to support
the obtainMessage + sendToTarget use case.
PiperOrigin-RevId: 353876557
They only require common. This allows their use for non-playback networking
without requiring the user to depend on the whole of core. I will also make
the same change for Cronet, although this needs a little more work.
PiperOrigin-RevId: 353649388
Not checking it would force ExoPlayer to use the
global tmp dir which would expose it to
external file replacement attacks.
This is a theoretical vulnerability as this code is
only use in tests and cache dir always exist in the
AOSP android implementation.
PiperOrigin-RevId: 353013929
Add a test to DataSourceContractTest that asserts the gzip flag is
either ignored or handled correctly.
Add a test resource to DefaultHttpDataSourceContracTest that enables
gzip compression on the 'server' and checks it's handled correctly by
the client.
PiperOrigin-RevId: 352574359
- Once the ability to add debug listeners is removed, analyticsCollector
is the only component that needs to receive the events. Hence it is
called directly.
- It seemed less confusing to do the same thing for (non-debug) video and
audio events, and to have AnalyticsCollector no longer implement
VideoListener and AudioListener directly. This clears up confusion that
arises as a result of the debug and non-debug interfaces defining the
same methods in some cases, and having to be careful not to end up
calling the corresponding AnalyticsCollector method twice.
PiperOrigin-RevId: 351835491
The ExoPlaybackException types are locations from where the exception
is coming from and not the type of exception itself, which should be
denoted by different exception classes.
To avoid a mixture of error types and class checks, the timeout
exceptions should use their own class and be of type RENDERER as this
is where the timeout actually happens.
PiperOrigin-RevId: 351337699
Catching OOM errors is bad practise unless there is a specific known
cause that tried to allocate a large amount of memory. Without this
known cause with a large allocation, the source of the error is
likely somewhere else in the app and every random small further
allocation may lead to additional OOM errors (for example b/145134199).
We have three known causes in ExoPlayer:
1. Source allocations based on unexpected values in streams. This is
caught on the loader thread and reported as an
UnexpectedLoaderException.
2. Output buffer allocations by non-MediaCodec decoders. These are
caught in SimpleDecoder on the decoder thread and reported as
UnexpectedDecodeException.
3. Input buffer allocations by non-MediaCodc decoders in their
constructors. These are currently caught on a higher-level and
reported as ExoPlaybackException.TYPE_OUT_OF_MEMORY.
For consistency and to prevent catching OOM errors without known cause
we can remove the generic TYPE_OUT_OF_MEMORY and catch the specific
exception where it occurs to report it as an
ExoPlaybackException.TYPE_RENDERER. This also has the added advantage
that the format metadata is added to the exception.
PiperOrigin-RevId: 351326688
This potentially allows a caller to resize their buffers to take into account
the required size.
It's kept as an IllegalStateException, since most use cases where it's thrown
still reflect invalid states, and since making it a checked exception requires
marking a lot of methods with throws clauses.
PiperOrigin-RevId: 351216968
*** Original commit ***
Rollback of ff8c8645ab
*** Original commit ***
Merge #8401: Initialize Format.codecs from HEVC SPS NAL unit (#8393)
Imported from GitHub PR https://github.com/google/ExoPlayer/pull/8401
This will allow ExoPlayer to check if video track's profile and level are supported by decoder when playing progressive media so...
***
PiperOrigin-RevId: 351139861
- Support setting the user-agent in CronetDataSource
- Support setting the default user-agent in CronetEngineWrapper
- Use the underlying network stack's default user-agent by
default. Many applications will configure the underlying
CronetEngine or OkHttpClient with a user-agent that they
expect to be used throughout their app, so always overriding
this with our own default, on reflection, is not the best
thing to do!
Issue: #8395
PiperOrigin-RevId: 350921963
*** Original commit ***
Merge #8401: Initialize Format.codecs from HEVC SPS NAL unit (#8393)
Imported from GitHub PR https://github.com/google/ExoPlayer/pull/8401
This will allow ExoPlayer to check if video track's profile and level are supported by decoder when playing progressive media sources.
Merge e582fb91b73c7c95e754167140211d5473c36d14 into 1347d572ef
Issue: #8393
***
PiperOrigin-RevId: 350871621
Imported from GitHub PR https://github.com/google/ExoPlayer/pull/8401
This will allow ExoPlayer to check if video track's profile and level are supported by decoder when playing progressive media sources.
Merge e582fb91b73c7c95e754167140211d5473c36d14 into 1347d572ef
Issue: #8393
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/ExoPlayer/pull/8401 from equeim:hevc-codecs e582fb91b73c7c95e754167140211d5473c36d14
PiperOrigin-RevId: 350738065
In many cases we just used "playback speed" as a detailed Javadoc
parameter or return type definition. This doesn't define which scale
the speed is using.
PlaybackParameters as the main point to set the speed already uses a
more precise wording to describe the value as a factor by which playback
will be sped up.
This change replaces other usages of "playback speed" with this wording
whereever we would usually add a unit, keeping "playback speed" for
summary statements etc to reference the general concept that doesn't
usually require a unit.
PiperOrigin-RevId: 350379139
This will allow ExoPlayer to check if video track's profile
and level are supported by decoder when playing progressive media sources.
Also fix typo in AvcConfig.
Retrieve the capture frame rate and the SVC temporal layer count from
the smta box instead of the meta box because this is what Samsung do. It
is not guaranteed that the meta box will be present and will contain all
the necessary info in all slomo files.
PiperOrigin-RevId: 345639680
As Player depends on VideoScalingMode, and
Renderer should not move to common,
to move Player to common, VideoScalingMode
needs to move first.
#player-to-common
PiperOrigin-RevId: 345314448
This method should be assumed to clear the data of the underlying array
(it will do this if the new limit > data.length).
This means it should only be called (directly) before writing into the
backing array.
It shouldn't be used as a shorthand for position=0, limit=x - those
should be two explicit method calls.
Most of these changes are no-ops, but they make the code more correct.
The TS SectionReader can't be easily changed to be 'safe', because it
relies on sectionData maintaining state between iterations of the while
loop. Instead I've added comments justifying the existing code.
PiperOrigin-RevId: 344515340
*** Original commit ***
Suppress warnings in preparation for Checker Framework 3.7.1 upgrade.
LSC: go/checker-lsc
Tested:
TAP train for global presubmit queue
http://test/OCL:342788973:BASE:342817196:1605636478036:6c558c0c
***
PiperOrigin-RevId: 343895651
In a later change, the AdPlaybackState will include the playing adsId (set by
the AdsLoader) and the ads loader will use this to determine what ad
information is associated with the playing/next periods, to allow loading ads
in playlists.
Apps can continue to pass just a URI for an ad tag with their MediaItem, in
which case the associated playlist will request that ad tag just and the same
state will be used for all occurrences of the ad tag.
This change has breaking changes to the AdsLoader interface and removes
deprecated ways of passing the ad tag, as it's very likely to go into a major
release anyway and not needing to handle the deprecated cases simplifies
ImaAdsLoader.
Issue: #3750
PiperOrigin-RevId: 340438580
Some content types always provide the license URL in the media.
The PlayReady example in the demo app doesn't provide a default
license URL for this reason, as an example.
#minor-release
PiperOrigin-RevId: 340125784
This change fixes format creation for traditional preparation of streams
where the master playlist contains more than one codec string per track
type.
Issue: #7877
PiperOrigin-RevId: 338538693
When disabling a TsExtractor track type because of a missing codec
in the master playlist, look through the entire codecs string
instead of checking the first codec with matching type.
Issue: #7877
PiperOrigin-RevId: 338530046
This is in preparation for supporting playlists of ads media sources using
ImaAdsLoader.
Existing ways of passing ad tags should still function but are deprecated (and
won't be supported with playlists).
Issue: #3750
PiperOrigin-RevId: 335618364
In 2.11.2 to 2.11.5, we considered all AAC streams as consisting
only of sync samples. In 2.11.6+, we considered no AAC streams as
consisting of sync samples, because the property is not guaranteed
specifically for xHE-AAC. This will have caused a small regression
is seek speed for some types of media.
This change brings back the optimization for AAC, specifically
excluding only xHE-AAC (and cases where we don't know what type of
AAC we're dealing with).
PiperOrigin-RevId: 328950697
It's potentially confusing that this resets both position & limit, so
require callers to pass `limit` explicitly, or call setPosition(0)
if that's actually what they intended.
This makes enforcing the limit in an upcoming change slightly safer.
PiperOrigin-RevId: 323340485
This allows us to enforce the limit because the array can only be
reassigned through reset(byte[]) or reset(byte[], int) (which update
the limit)
PiperOrigin-RevId: 323339960
This removes Supplier, Function and Predicate. Consumer is kept because
Guava doesn't have an equivalent (Java 8 does, but we can't use that
yet).
#exofixit
PiperOrigin-RevId: 323324392
Replace `type` with (optional) `mimeType` and add `keySetId` in
DownloadRequest. The DownloadHelper infers the downloading method (DASH,
HLS, SmoothStreaming or Progressive) from the content's MIME type and
URI.
PiperOrigin-RevId: 322117384
In order to use DeviceInfo class in media2, this CL moves the class to
common module. It didn't move the other file in the same package,
DeviceListener, as it's for DeviceComponent but media2 SessionPlayer
doesn't have components as it is already flattened. PlayerCallback will
have equivalent methods of DeviceListener.
PiperOrigin-RevId: 321154997
The renderers are currently constructing formats that consist of their
input format with added PCM encoding. Such formats are not self-consistent,
and this only works because DefaultAudioSink ignores the rest of the
format if the format has a PCM encoding. It would not work if the sink
implementation checked the MIME type, for example, which wouldn't be a
strange or incorrect thing for it to do.
The more correct approach is to construct a new format that properly
represents the PCM that will be provided to the sink.
This change also renames supportsOutput to supportsFormat, because
AudioSink itself has both an input and an output side, and this method
is actually evaluating support on the input side of the sink.
PiperOrigin-RevId: 320396089
ExoMediaCrypto with the sole purpose of being unsupported. So all
renderers checking whether the type is supported will report
encrypted content as unsupported, unless the source producing
the format replaces it with a valid value.
PiperOrigin-RevId: 319824703
They are all for Context.getSystemService that is allowed to return
null. In most cases where we need to service, we make an assertion that
it is available.
PiperOrigin-RevId: 319503557
The list of MediaSourceHolder in ExoPlayerImpl is only maintained to be able to create a PlaylistTimeline for masking. By keeping only the id and a snapshot of the timeline of the MediaSourceHolder in ExoPlayerImpl, parallel access is prevented and we still have sufficient information to create the masking timeline.
PiperOrigin-RevId: 319003837
Previously only pcm encoding were stored in Format,
this was an issue as for audio passthrough and offload
lots of code needs to pass complex format informations
(encoding, sample rate, channel count, gapless metadata)
but could not use Format and each function was taking
each as different parameter.
By allowing Format to contain any encoding, and not only
pcmEncoding, it allows to pass a Format everywhere in ExoPlayer
code that needs a Format.
This patch does not have any functional change. It is only an internal refactor.
PiperOrigin-RevId: 318789444
They currently fall back to the main Looper if the current thread
doesn't have a Looper. All the changed Handlers are guaranteed to
be created on a thread with a Looper (mostly the ExoPlayer playback
Looper) and thus can make this stricter assumption. This makes it
easier to reason about the code as there are no ambiguities as to which
thread the Handler is running on.
PiperOrigin-RevId: 317334503
*** Original commit ***
Rename Util methods to clarify which Looper is used.
The method name didn't clarify that either the main or current
Looper is used.
***
PiperOrigin-RevId: 317283606
