TransformerAndroidTestRunner#run will throw any exception that occurs,
so there is no need to assert the result exception is null.
PiperOrigin-RevId: 546923823
Frame buffers are focused, not current. EGL Contexts may be current but this
is a prerequisite for focusing a framebuffer, and this alone isn't
sufficient to make a bitmap.
Clear this up as it can make some complex tests harder to understand, if the
methods needed don't match up in naming.
PiperOrigin-RevId: 546305118
Add documentation for threading requirements at the class level (in
addition to existing documentation on the methods) to improve
discoverablility. Also fix a couple of nits in the javadoc (US English
spelling, avoid passive voice) and in `OnInputFrameProcessedListener`.
PiperOrigin-RevId: 546303732
This allows us to simplify and reduce thread initialization, hops and the
synchronization cost associated with them, especially when more and more VFPs
are used.
PiperOrigin-RevId: 545622169
On a MediaItem change, the input Format (and Effects to apply) may be
different. Therefore the AudioProcessingPipeline must be reconfigured
to determine what processing is active, and what the AudioFormat of the
data output is. In the event that it is different, additional
AudioProcessor instances must be used to ensure the encoder will still
be able to accept the audio buffers.
PiperOrigin-RevId: 544338451
Providing the sync token in the api allows the client to decide which waiting method they would like to use depending on the use case, allowing them to optimise if possible.
PiperOrigin-RevId: 543997311
This fixes a broken javadoc link and makes it possible to customize media
source creation via the asset loader factory without also having to
implementing a decoder factory from scratch.
PiperOrigin-RevId: 543995538
Goal of tests (SequenceExportTest) that use this media is for the
silence and the media to match exactly with audio format, however
`sample_with_increasing_timestamps.mp4` had a different sample rate.
testvid_1022ms.mp4: channel count = 2, sample rate = 44100.
PiperOrigin-RevId: 543458948
MP4 edit lists sometimes ask to start playback between two samples.
If this happens, we currently change the timestamp of the first
sample to zero to trim it (e.g. to display the first frame for a
slightly shorter period of time). However, we can't do this to audio
samples are they have an inherent duration and trimming them this
way is not possible.
#minor-release
PiperOrigin-RevId: 543420218
FallbackListener.onTransformationRequestFinalized() is called from the
AssetLoader thread for audio, and from the GL thread for video.
PiperOrigin-RevId: 542851284
With the upcoming "handle format changes" CL, stereo -> mono audio
would add an AudioProcessor. Robolectric decodes output encoded data,
which crashes some AudioProcessors because the number of frames may not
be an integer.
PiperOrigin-RevId: 542568875
The effects pipeline must receive images in the sRGB colorspace due to the color transfers applied in the shaders. Currently the burden to making sure images are in the right colorspaces falls onto apps. This CL ensures that this is not the case anymore.
PiperOrigin-RevId: 542323613
Audio only tests are now using RAW audio where possible, which is
passed through the Robolectric decoders/encoders, and can be handled by
the AudioProcessor instances accurately.
PiperOrigin-RevId: 541648853
To more accurately describe what they do, especially as Compositor will
starts to use more contexts or threads, and it's important to know what
needs to be reset/recreated/focused before what methods.
PiperOrigin-RevId: 541010135
Issue: When running the Transformer related test cases, the tests are flaky
because the order in which audio and video samples are interleaved seems to
differ in few instances.
Root cause: When running a transformation the sample producer (Asset loader)
and sample consumer (Sample pipeline) both runs on different thread and
theoretically there is no reason for behaviour to be deterministic because
the number of samples produced/written depends on how fast individual thread
works. So it is indeed surprising that test somehow worked deterministically in
majority of instances (may be something to do with Robolectric environment).
Solution: Since we don't expect the order of sample interleaving to be deterministic, make the dumping logic deterministic where all the video
samples will be collected and then dumped together (similarly for audio). This would mean we won't be able to see the interleaving so for that we need to
add separate test case verifying the interleaving logic only.
Pending: Test case for interleaving.
PiperOrigin-RevId: 540930871
The existing NullableType has been deprecated 5 years ago and causes
crashes in Kotlin apps because Kotlin doesn't recognize this annotation
as a nullable type annotation.
While we can't align on a single @Nullable annotation yet, we can at
least replace this one by JSR305's @Nonnull(MAYBE) as it fulfils all
requirements, including full Kotlin compatiblity. To avoid the
cumbersome name, we can redefine it as our own @NullableType
annotation. (We can't use @Nullable to avoid name clashes with the main
@Nullable annotation from AndroidX)
Issue: google/ExoPlayer#6792
PiperOrigin-RevId: 540497469
The test transcodes four media items with distinct effects, keeping one frame
each; extracts the four frames in the produced video, and compares them against
the expected results.
PiperOrigin-RevId: 539697344
This methods currently registers and queues the bitmaps Will need to have a method that just queues bitmaps in future CLs.
#minor-release
PiperOrigin-RevId: 539605628
To ensure no regressions for the potentially confusing pipeline of:
* HDR electrical -> SDR linear EOTF+OOTF, and
* SDR linear -> SDR electrical OETF
PiperOrigin-RevId: 538741079
208eefc0fd introduced using `DefaultDecoderFactory.getDecoderInfo(format) != null` caused certain tests not to be skipped when they were expected to be, creating more mh failures.
PiperOrigin-RevId: 537820370
ExoPlayer extractors (backing `MetadataRetriever`) now parse the color format
from the bitstream so using `MetadataRetriever` should be an equivalent but
more lightweight way to verify the color info.
Also remove try/catch blocks in test code calling into these methods, and add
skipping based on decoder capabilities in the cases where it was missing.
PiperOrigin-RevId: 537789483
In some cases the codec selected for decoding has a different MIME type than
the media. In thoses cases Transformer continued to use the media's MIME type
and that caused codec configuration failures.
Removed `EncoderUtil.findCodecForFormat()` as we stopped using the method it
uses for finding a codec. Plus, the method is only used in the test.
See also `MediaCodecUtil.getALternativeCodecMimeType()`.
PiperOrigin-RevId: 536683663
Tentative/experimental value to reduce codec timeouts. We will reconsider using a larger limit after seeing whether this really does reduce error rate.
PiperOrigin-RevId: 534491615
Mp4Muxer already supports writing Mp4LocationData so added that
as supported Metadata entry.
Support for more Metadata entries will be added in upcoming CLs.
PiperOrigin-RevId: 534473866
Earlier metadata was written multiple times as it came.
With new changes, all the distinct metadata entries will
get collected and will be written at once in the end.
PiperOrigin-RevId: 534088401
Docs:
* https://developer.android.com/build/publish-library/configure-pub-variants#single-pub-var
* https://developer.android.com/reference/tools/gradle-api/8.0/com/android/build/api/dsl/PublishingOptions
This resolves the following warning from Android Gradle Plugin 7.2.2 and
helps unblock the upgrade to AGP 8.0.1:
> Software Components will not be created automatically for Maven
> publishing from Android Gradle Plugin 8.0. To opt-in to the future
> behavior, set the Gradle property
> `android.disableAutomaticComponentCreation=true` in the
> `gradle.properties` file or use the new publishing DSL.
>
> Affected Modules: `lib-cast`, `lib-common`, `lib-container`,
> `lib-database`, `lib-datasource`, `lib-datasource-cronet`,
> `lib-datasource-okhttp`, `lib-datasource-rtmp`, `lib-decoder`,
> `lib-effect`, `lib-exoplayer`, `lib-exoplayer-all (legacy)`,
> `lib-exoplayer-dash`, `lib-exoplayer-hls`, `lib-exoplayer-ima`,
> `lib-exoplayer-rtsp`, `lib-exoplayer-smoothstreaming`,
> `lib-exoplayer-workmanager`, `lib-extractor`, `lib-media2 (legacy)`,
> `lib-mediasession (legacy)`, `lib-muxer`, `lib-session`,
> `lib-transformer`, `lib-ui`, `lib-ui-leanback`, `test-utils`,
> `test-utils-robolectric`
Issue: androidx/media#409
PiperOrigin-RevId: 533464133
This is a pre-requisite for the Android Studio upgrade assistant to
upgrade from AGP 7.2.2 to 8.0.1, otherwise it fails and complains
this is missing.
Issue: androidx/media#409
PiperOrigin-RevId: 533463246
This is blocking the upgrade to AGP 8.0.1. The Android Studio Upgrade
Assistant refuses to run with the error:
> Modules have the same package for their `main` and `androidTest`
> artifacts
>
> The package specifications in `AndroidManifest.xml` files define the
> same package for the `main` and `androidTest` artifacts, in the
> following modules: `effect`, `muxer`, `transformer`,
`test_exoplayer_abr`, `test_exoplayer_performance`, and `container`.
This change also adds the `.test` suffix to `test/AndroidManifest.xml`
files where it's missing, because although it's not mentioned in the
Upgrade Assistant error it does cause problems later.
```
> Incorrect package="androidx.media3.database" found in source AndroidManifest.xml: libraries/database/src/test/AndroidManifest.xml.
Setting the namespace via the package attribute in the source AndroidManifest.xml is no longer supported.
Recommendation: remove package="androidx.media3.database" from the source AndroidManifest.xml: libraries/database/src/test/AndroidManifest.xml.
```
Issue: androidx/media#409
PiperOrigin-RevId: 533460180
This allows us to avoid needing a reference to the VideoFrameProcessor, which
can be especially difficult if an App only has a reference to the
VideoFrameProcessor.Factory it passes into Transformer/ExoPlayer.
PiperOrigin-RevId: 533205983
This device failed on HdrEditingTest's exportAndTranscode_hlg10File_whenHdrEditingUnsupported_toneMapsOrThrows
before this CL, and succeeds on that test after this CL.
PiperOrigin-RevId: 532796897
This is a failure only in SSIM, so it seems unlikely we'll prioritize this over
other work or bugs soon. Suppress test failures to reduce triage burden.
PiperOrigin-RevId: 532200729
Allow the VideoFrameProcessor to output multiple textures at a time, so that
lifetime of textures is up to the consumer calling VFP.releaseOutputFrame.
The FinalShaderProgramWrapper also has a new maxCapacity limit added, to ensure
the a reasonable amount of textures is used and avoid using up memory.
PiperOrigin-RevId: 532094256
In the past, the SequenceAssetLoader was released in TransformerInternal
when the export ended.
fc539da061 was made to release the SequenceAssetLoader earlier, when
loading ended. This was causing player release timeouts because the last
AssetLoader in the sequence was released before the SamplePipelines (see
0b40bc37ab for more information).
The code that was releasing the SequenceAssetLoader was first commented
out because we didn't have an understanding of what was happening.
This change removes the early SequenceAssetLoader release all together.
It doesn't have any effect as this code was already commented out.
PiperOrigin-RevId: 532065673
*** Original commit ***
Rollback of 65d5132f76
*** Original commit ***
Create InAppMuxer in transformer
To use the InAppMuxer, the client needs to pass InAppMuxer Factory.
***
***
PiperOrigin-RevId: 531470081
The texture input tests in TransformerEndToEndTest were not passing on
Pixel 7. Implemented a fix and fixed other minor threading issues I
spotted while looking at the code.
PiperOrigin-RevId: 531141659
