That said, only SDR is supported for now, so this will always throw if
HDR is input. This will also throw if different ColorInfo values are input
because color SDR mixing (ex. between sRGB and BT709) is not yet supported.
PiperOrigin-RevId: 563457729
When checking the color transfer, there is no reason that the file should have
exactly two tracks, and this assertion means that this method can't be used
as-is for checking video-only files, for example.
PiperOrigin-RevId: 562813111
Overlays may be overlaid over:
* In VideoFrameProcessor, videos or images (or texture input).
* In Compositor, other videos.
In Compositor, Overlays may consist of video, so it could be confusing
for videoFrameAnchor to contrast with overlayAnchor.
Also, rename overlayAnchor to overlayFrameAnchor, since it's modifying
the anchor in the overlay's frame, so this name seems slightly more precise.
PiperOrigin-RevId: 562004292
Implement VideoCompositor support of:
* Different input and output sizes
* CompositorSettings, to customize output size based on input texture sizes
* OverlaySettings, to place an input frame in an arbitrary position on
the output frame.
Also, refactor Overlay's matrix logic to make it more reusable between
Compositor and Overlays
PiperOrigin-RevId: 561931854
The first call to method `registerInputStream` doesn't block.
Later successive calls to the method blocks until the previous register call
finishes.
PiperOrigin-RevId: 559694490
In addition to this being how Alpha should be handled, tests do fail under
API 29 without this CL. Unfortunately while these tests do fail under API 29
without this CL, we currently only run this test on API 33 emulators, so we
didn't catch this failure earlier (until compositor tests on mh failed on all
devices under API 29 and succeeded on all at or over 29).
PiperOrigin-RevId: 557781757
To ensure that for each output bitmap from the compostor, the right input
timestamps were used.
Only applied on a subset of tests to avoid needing to upload+maintain
too many files/size in the test binary, especially when it would test
duplicate behavior
PiperOrigin-RevId: 555222530
This means we now require 2+ input frames per input, and compare the primary
stream timestamp with secondary stream timestamps in order to select the
correct output timestamp. We also must release frames and back-pressure as
soon as possible to avoid blocking upstream VFPs.
Also, improve signalling of VFP onReadyToAcceptInputFrame
PiperOrigin-RevId: 553448965
This allows for custom implementations of this interface, like
a TestVideoCompositor or partner-implemented implementation
PiperOrigin-RevId: 552541631
After this change, every queued bitmap is treated as an individual input stream
(like a new MediaItems).
This change merges the FrameDropTest and FrameDropPixelTest into one (while maintaining all the test cases)
- This is accomplished by generating bitmaps with timestamps on it in FrameDropTest and compare them with goldens (one may call this a pixel test, please lmk if you want this to be renamed)
- The most part of the change comes from DefaultVideoFrameProcessorVideoFrameRenderingTest. The overall working is
- We bypass the input manager
- The TestFrameGenerator generates frames based on timestamps. In this case, we generate frames with timestamps on it
- The generated frame is sent to texture output and in turn saved to bitmaps
- We then compare the generated bitmap with the goldens
PiperOrigin-RevId: 551795770
Move shared test logic to the test runner.
This does increase indirection, which isn't usually preferable in tests.
However, we will have many different tests that would use logic
like this, so this allows us to reduce repetition.
PiperOrigin-RevId: 551536438
For each event, the timestamp and presentation time is logged. The trace can
then be dumped to a tsv file and easily imported in a spreadsheet.
PiperOrigin-RevId: 550839156
signalEndOfInputStream is needed for when streams have different amounts of
frames, so that if the primary stream finishes after a secondary stream, it
can end without waiting indefinitely for the secondary stream's matching
timestamps.
onEnded mirrors this API on the output side, which will be necessary to
know when to call signalEndOfInput on downstream components (ex. on downstream)
VideoFrameProcessors
PiperOrigin-RevId: 549969933
This serves as a sort of test with more frames for the compositor for now
(before more varied video system tests come later when integrating with
Transformer), showing it doesn't error out and outputs the right
amount of frames.
Due to the VFPTestRunner having a 5s timeout, and mostly due to presubmit
emulators being very slow with OpenGL, there is a sort of limitation
to how many frames this type of test can have, depending on the test target
PiperOrigin-RevId: 548159762
* Allow more than one input bitmap at a time.
* Allow Compositor to take in and set up an Executor. Otherwise,
Compositor resources may be created on one thread and accessed on another.
* Add a Compositor TestRunner to reuse test code more.
* Update VideoFrameProcessingTaskExecutor to use a new onError listener, so
that it's more reusable in non-DVFP contexts, like for Compositor.
PiperOrigin-RevId: 547206053
TransformerAndroidTestRunner#run will throw any exception that occurs,
so there is no need to assert the result exception is null.
PiperOrigin-RevId: 546923823
Frame buffers are focused, not current. EGL Contexts may be current but this
is a prerequisite for focusing a framebuffer, and this alone isn't
sufficient to make a bitmap.
Clear this up as it can make some complex tests harder to understand, if the
methods needed don't match up in naming.
PiperOrigin-RevId: 546305118
This allows us to simplify and reduce thread initialization, hops and the
synchronization cost associated with them, especially when more and more VFPs
are used.
PiperOrigin-RevId: 545622169
Providing the sync token in the api allows the client to decide which waiting method they would like to use depending on the use case, allowing them to optimise if possible.
PiperOrigin-RevId: 543997311
MP4 edit lists sometimes ask to start playback between two samples.
If this happens, we currently change the timestamp of the first
sample to zero to trim it (e.g. to display the first frame for a
slightly shorter period of time). However, we can't do this to audio
samples are they have an inherent duration and trimming them this
way is not possible.
#minor-release
PiperOrigin-RevId: 543420218
To more accurately describe what they do, especially as Compositor will
starts to use more contexts or threads, and it's important to know what
needs to be reset/recreated/focused before what methods.
PiperOrigin-RevId: 541010135
The existing NullableType has been deprecated 5 years ago and causes
crashes in Kotlin apps because Kotlin doesn't recognize this annotation
as a nullable type annotation.
While we can't align on a single @Nullable annotation yet, we can at
least replace this one by JSR305's @Nonnull(MAYBE) as it fulfils all
requirements, including full Kotlin compatiblity. To avoid the
cumbersome name, we can redefine it as our own @NullableType
annotation. (We can't use @Nullable to avoid name clashes with the main
@Nullable annotation from AndroidX)
Issue: google/ExoPlayer#6792
PiperOrigin-RevId: 540497469
The test transcodes four media items with distinct effects, keeping one frame
each; extracts the four frames in the produced video, and compares them against
the expected results.
PiperOrigin-RevId: 539697344
This methods currently registers and queues the bitmaps Will need to have a method that just queues bitmaps in future CLs.
#minor-release
PiperOrigin-RevId: 539605628
To ensure no regressions for the potentially confusing pipeline of:
* HDR electrical -> SDR linear EOTF+OOTF, and
* SDR linear -> SDR electrical OETF
PiperOrigin-RevId: 538741079
208eefc0fd introduced using `DefaultDecoderFactory.getDecoderInfo(format) != null` caused certain tests not to be skipped when they were expected to be, creating more mh failures.
PiperOrigin-RevId: 537820370
ExoPlayer extractors (backing `MetadataRetriever`) now parse the color format
from the bitstream so using `MetadataRetriever` should be an equivalent but
more lightweight way to verify the color info.
Also remove try/catch blocks in test code calling into these methods, and add
skipping based on decoder capabilities in the cases where it was missing.
PiperOrigin-RevId: 537789483
In some cases the codec selected for decoding has a different MIME type than
the media. In thoses cases Transformer continued to use the media's MIME type
and that caused codec configuration failures.
Removed `EncoderUtil.findCodecForFormat()` as we stopped using the method it
uses for finding a codec. Plus, the method is only used in the test.
See also `MediaCodecUtil.getALternativeCodecMimeType()`.
PiperOrigin-RevId: 536683663
This is blocking the upgrade to AGP 8.0.1. The Android Studio Upgrade
Assistant refuses to run with the error:
> Modules have the same package for their `main` and `androidTest`
> artifacts
>
> The package specifications in `AndroidManifest.xml` files define the
> same package for the `main` and `androidTest` artifacts, in the
> following modules: `effect`, `muxer`, `transformer`,
`test_exoplayer_abr`, `test_exoplayer_performance`, and `container`.
This change also adds the `.test` suffix to `test/AndroidManifest.xml`
files where it's missing, because although it's not mentioned in the
Upgrade Assistant error it does cause problems later.
```
> Incorrect package="androidx.media3.database" found in source AndroidManifest.xml: libraries/database/src/test/AndroidManifest.xml.
Setting the namespace via the package attribute in the source AndroidManifest.xml is no longer supported.
Recommendation: remove package="androidx.media3.database" from the source AndroidManifest.xml: libraries/database/src/test/AndroidManifest.xml.
```
Issue: androidx/media#409
PiperOrigin-RevId: 533460180
This allows us to avoid needing a reference to the VideoFrameProcessor, which
can be especially difficult if an App only has a reference to the
VideoFrameProcessor.Factory it passes into Transformer/ExoPlayer.
PiperOrigin-RevId: 533205983
This is a failure only in SSIM, so it seems unlikely we'll prioritize this over
other work or bugs soon. Suppress test failures to reduce triage burden.
PiperOrigin-RevId: 532200729
Allow the VideoFrameProcessor to output multiple textures at a time, so that
lifetime of textures is up to the consumer calling VFP.releaseOutputFrame.
The FinalShaderProgramWrapper also has a new maxCapacity limit added, to ensure
the a reasonable amount of textures is used and avoid using up memory.
PiperOrigin-RevId: 532094256
*** Original commit ***
Rollback of 65d5132f76
*** Original commit ***
Create InAppMuxer in transformer
To use the InAppMuxer, the client needs to pass InAppMuxer Factory.
***
***
PiperOrigin-RevId: 531470081
*** Original commit ***
Create InAppMuxer in transformer
To use the InAppMuxer, the client needs to pass InAppMuxer Factory.
***
PiperOrigin-RevId: 531056436
When we created androidTests, in the past, they always had a URI pointing to a resource, therefore we always had a URI scheme. With texture input, this will not longer be the case (EditedMediaItems's may have URI.EMPTY, which have a null scheme) so we need to check for this so tests don't falsely fail.
PiperOrigin-RevId: 528848411
In ASwB, all Transformer tests can be run by right-clicking on the project and
clicking "Run all tests". We cannot, however, select only some specific test
files within a project (ex. all non-analysis tests) to run tests on.
Add @Ignore to analysis tests, which are not intended to be run anyways
when determining whether Transformer is working on some device. These
tests also don't have proper skipping logic when a device doesn't support a
format, so they can't be run effectively on low-end devices anyways.
This eases manual testing, for example when debugging whether tests all pass
on a device.
When analysis tests are desired to be run, it should be easy to comment out
the @Ignore.
PiperOrigin-RevId: 527289600
Allow the VideoFrameProcessor to output to a texture without an output surface.
Tested by updating texture output tests to no longer output to a surface.
PiperOrigin-RevId: 527244605
Previously, I assumed that SDR contents must be BT709, and HDR contents must be
BT2020. Turns out BT2020 is just wide-gamut, and SDR contents / transfers may be
represented in BT2020 color spaces.
Relax the check, so that we don't throw when valid BT2020 SMPTE 170M contents
are input into effects.
PiperOrigin-RevId: 526668347
