Transformer always enabled glAssertionsEnabled, so there should
be no functional change.
ExoPlayer previously disabled glAssertionsEnabled, so GlUtil logged
GlExceptions instead of throwing them. The GlExceptions are now
caught and logged by the callers so that there should also be no
functional change overall.
This change also replaces EGLSurfaceTexture#GlException with
GlUtil#GlException.
PiperOrigin-RevId: 453963741
(cherry picked from commit cc1f32d094)
The call doesn't currently reset the already loaded suppliers and
factories. Also fix the supplier loading code to use a local copy
of the current dataSourceFactory to avoid leaking an updated
instance to a later invocation.
Issue: androidx/media#116
PiperOrigin-RevId: 460721541
(cherry picked from commit adc50515e9)
I don't think it's useful to keep these in numerical order, it makes
more sense to keep them grouped into a 'logical' ordering.
#minor-release
PiperOrigin-RevId: 460453464
(cherry picked from commit ad46cb1c81)
We wait until a previous AudioTrack has been released before
creating a new one. This is currently done with a thread
block operation, which may cause ANRs in the extreme case
when someone attempts to release the player while this is
still blocked.
The problem can be avoided by just returning false from
DefaultAudioSink.handleBuffer to try again until the previous
AudioTrack is released.
Reproduction steps to force the issue:
1. Add Thread.sleep(10000); to the AudioTrack release thread.
2. Add this to the demo app:
private int positionMs = 0;
Handler handler = new Handler();
handler.post(new Runnable() {
@Override
public void run() {
player.seekTo(positionMs++);
if (positionMs == 10) {
player.release();
} else {
handler.postDelayed(this, 1000);
}
}
3. Observe Player release timeout exception.
These steps can't be easily captured in a unit test as we can't
artifically delay the AudioTrack release from the test.
Issue: google/ExoPlayer#10057
PiperOrigin-RevId: 459468912
(cherry picked from commit a83ab05aec)
ProgressiveMediaPeriod loads all available tracks into SampleStreams
(because it needs to read the data anyway and it allows easy activation
of tracks without reloading). However, the SampleStreams for disabled
tracks are not read and no one if waiting for them.
The buffered position is used for user-visible state (e.g. in the UI)
and to check how much data is already buffered to decide when to stop
buffering (using LoadControl). Both values benefit from only
using the actually enabled tracks to better reflect what is available
for playback at the moment.
Issue:Issue: google/ExoPlayer#10361
PiperOrigin-RevId: 458475038
(cherry picked from commit ceb23e69bb)
Previously two timelines that differed only in shuffle order were
considered equal, which resulted in no call to
Player.Listener.onTimelineChanged when calling
ExoPlayer.setShuffleOrder. This in turn resulted in no call to
MediaControllerCompat.Callback.onQueueChanged.
Also make a small fix inside ExoPlayerImpl.setShuffleOrder, to ensure
that the new shuffle order is used when constructing the masked
timeline.
Issue: google/ExoPlayer#9889
#minor-release
PiperOrigin-RevId: 457703727
(cherry picked from commit 6f9ce4056c)
NoUidTimeline still exists as a private detail of TestUtil, but it no
longer extends ForwardingTimeline because the interactions are quite
hard to reason about.
#minor-release
PiperOrigin-RevId: 457703593
(cherry picked from commit 2a2d9e360b)
1. The offloadSchedulingEnabled value doesn't need to be in
PlaybackInfo because it's never updated in EPII.
2. The sleepingForOffload value in EPII wasn't updated explicitly
(just via the return value of a method). It was also only
meant to be enabled while the player is actively playing, but
confusingly triggered from a path where the player may
theoretically be buffering as well.
3. The offload sleeping (=not scheduling doSomeWork) was interwoven
into the actual scheduling code making it slightly hard to follow.
This can be improved slightly by keeping the offload sleeping
decision and the scheduling separate.
PiperOrigin-RevId: 457427293
(cherry picked from commit 5c2752b4a9)
The offload sleeping stops as soon as a new DO_SOME_WORK message
is handled (because this indicates an expected change in rendering
and we want to stop sleeping until we know it's safe to do so).
Every exit path from doSomeWork needs to clear other pending
DO_SOME_WORK messages as these requests have already been handled by
the current method invocation. This currently doesn't happen from the
offload sleeping return path and a previously queued DO_SOME_WORK
message can immediately wake up the rendering loop again.
Fix this by moving the message removal to the beginning of the
doSomeWork method (as it prevents forgetting it in one of the
exit paths later).
PiperOrigin-RevId: 456259715
(cherry picked from commit a7649b639c)
The API 32 SDK has incorrect versioning metadata for Spatializer. It
reports the whole class has only been present since API 33 (which is
surely impossible given it's present in the API 32 SDK):
https://issuetracker.google.com/234009300
The metadata seems to be correct in the API 33 SDK, so this baseline
will no longer be needed when we bump to `compileSdkVersion = 33`.
The default constructor is only allowed to be called on
API < 32 and the test should use the defined UNSET constant
to be API independent.
#minor-release
PiperOrigin-RevId: 454568893
(cherry picked from commit e8bcdf437e)
`codecDrainAction` is set to `DRAIN_ACTION_NONE` in 3 places in
`MediaCodecRenderer`:
* The constructor (so there's no prior state to worry about)
* `updateDrmSessionV23()`: Where `mediaCrypto` is reconfigured based
on `sourceDrmSession` and `codecDrmSession` is also updated to
`sourceDrmSession`.
* `resetCodecStateForFlush()`: Where (before this change) the action
is unconditionally set back to `DRAIN_ACTION_NONE` and so any
required updated implied by
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` is not done.
This change ensures that `flushOrReleaseCodec()` handles
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` before calling .
This probably also resolves Issue: google/ExoPlayer#10274
#minor-release
PiperOrigin-RevId: 454114428
(cherry picked from commit 222faa96d0)
The track selector will select multi-channel formats when those can be
spatialized, otherwise the selector will prefer stereo/mono audio
tracks. When the device supports audio spatialization (Android 12L+),
the DefaultTrackSelector will monitor for changes in the platform
Spatializer and trigger a new track selection upon a
Spatializer change event.
Devices with a `television` UI mode are excluded from audio channel
count constraints.
#minor-release
PiperOrigin-RevId: 453957269
(cherry picked from commit e2f0fd7673)
Some Player implementations have no playlist capability but can still
set a MediaItem for playback. Examples are a MediaController connected
to a legacy MediaSession, ExoPlayer up to 2.12 or MediaPlayer.
To indicate this capability, we need an allowed command in addition
to COMMAND_CHANGE_MEDIA_ITEMS that just allows to set a single item
that replaces everything that is currently played.
#minor-release
PiperOrigin-RevId: 453879626
(cherry picked from commit 5333c67d08)
With HLS chunkless preparation, audio formats may have no value
for channel count. In this case, the DefaultAudioSink will either query
the platform for a supported channel count (API 29+) or assume a max
channel count based on the encoding spec in order to decide whether the
audio format can be played with audio passthrough.
Issue: google/ExoPlayer#10204
#minor-release
PiperOrigin-RevId: 453644548
(cherry picked from commit 8697338233)
The current setup with distinct, private `keyForField` implementations,
leaves open the (theoretical) possibility of a clash in the `Bundle`
keys used by the superclass and subclass. This change brings
consistency with our only other extensible `Bundleable` type
(`PlaybackException`).
#minor-release
PiperOrigin-RevId: 453385875
(cherry picked from commit 814e43dbb9)
We generally nest the `Builder` for `Foo` inside `Foo`. In this case,
there's already a `DefaultTrackSelector.Parameters.Builder` type visible
to a developer, it just happens to be the 'common'
`TrackSelectorParameters.Builder`, so using it is a bit weird. For
example this code snippet doesn't compile because
`DefaultTrackSelector.Parameters.Builder#build()` returns
`TrackSelectionParameters`. This CL fixes that problem and the code
snippet now compiles.
```java
DefaultTrackSelector.Parameters params =
new DefaultTrackSelector.Parameters.Builder(context).build()
```
#minor-release
PiperOrigin-RevId: 453215702
(cherry picked from commit 247c2d845d)
Unconditionally sleep for offload, if the audio buffer is full.
Previously ExoPlayer would not sleep if the expected wake-up was
in 2s. This was to prevent underrun if the wake-up was delayed.
Experiments have shown that the wakup audio buffer is far more
than 2s (around 1min). Additionally,
the metric was incorrect because it measured both,
AudioTrack + DSP.
Finally, this metric was erroneous after a gapless transition,
when the head position would reset to 0 and thus the computed
delay until next wakeup was too large.
PiperOrigin-RevId: 451383701
*** Original commit ***
Rollback of 07302a23bd
*** Original commit ***
Remove `@Nullable` from `MediaSource.Factory` setters
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default imple...
***
PiperOrigin-RevId: 450453325
AudioTrack.setOffloadEndOfStream should be called after a track
has been buffered. Additionally, the AudioTrack must be playing.
It has been observed that for very short media (<1s), the AudioTrack
might not have started immediately after the read that buffered
the audio.
In such a situation, calling AudioTrack.setOffloadEndOfStream throws
and playback fails.
Avoid this failure by checking that the AudioTrack is playing before
calling setOffloadEndOfStream.
This means that very short gapless media will not be gapless, this was
deemed acceptable given that such very short media should be very rare
in offload.
PiperOrigin-RevId: 450431146
*** Original commit ***
Remove `@Nullable` from `MediaSource.Factory` setters
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default implementation is only used if the
parameter is `null`.
PiperOrigin-RevId: 450410833
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default implementation is only used if the
parameter is `null`.
PiperOrigin-RevId: 450386627
This detection relies on an unsupported workaround and may trigger
permission warnings in tools analyzing permission usage although
no permission is needed or requested by app code.
Given the majority of 5G-NSA playbacks are on API 31+ by now,
we can remove this path to avoid the permission confusion and the
unsupported detection workaround.
PiperOrigin-RevId: 450382586
This causes a bug where the forwarded selections are no longer
assumed equal and the child MediaPeriods will think they need
to reset streams even though the selection stayed the same.
Issue: Issue: google/ExoPlayer#10248
PiperOrigin-RevId: 449454038
We need to pass timestamp for the list of cues so we are defining a new class CueGroup which will store both cues and timestamp.
PiperOrigin-RevId: 449212054
Network type detection on these API levels couldn't be tested
yet because of a missing Robolectric feature. This was fixed by
the recent Robolectric upgrade and the restrictions can be removed.
This also requires to replicate the platform hack we rely on on
these API levels.
PiperOrigin-RevId: 448240431
The TrackSelector is released when the player is released. The
TrackSelector can be reused if TrackSelector.init() is called again.
PiperOrigin-RevId: 446439717
Some APIs from Android 12L were used either via reflection or
constants values were hard-coded. We can now use these APIs directly
since we upgraded the compile SDK version to 32.
PiperOrigin-RevId: 446167543
Overriding any methods of AnalyticsListener requires using the unstable
API. In future we can incrementally add AnalyticsListener methods to the
stable API.
PiperOrigin-RevId: 445420361
This is consistent with the IntDef name, and frees up the CONTENT_TYPE_
prefix for the @ContentType values (which are currently just TYPE_*,
and therefore ambiguous with lots of other 'type' values in C).
PiperOrigin-RevId: 445356476
When downlading an adaptive asset, if an ExoPlaybackException happens
during track selection, the player raises an
UnsupportedOperationException which is not handled gracefully and can
crash the app main thread.
This change catches the error and forwards it to
DownloadHelper.Callback.onPrepareError() as an IOException.
PiperOrigin-RevId: 443015332
App code should get all of this information from TrackGroupInfo,
and should only need TrackGroup as a key to use for overrides.
PiperOrigin-RevId: 438840925
The problem is not the IntDef array, it's the fact the lint tool
is unable to correctly infer the annotations on the lambda parameters
without them being explicitly annotated. It seems explicitly annotating
is better than suppressing all IntDef warnings in the whole method.
PiperOrigin-RevId: 437969271
Some infra thinks the if does not protect against API incompatibilities
(example: Android's soong build system). AndroidStudio 2021.3.1 also
signals a warning.
#minor-release
PiperOrigin-RevId: 435027073
*** Original commit ***
Don't call MediaDrm.setLogSessionId in FrameworkMediaDrm
This method throws an UnsupportedOperationException on some Android 12
devices.
***
PiperOrigin-RevId: 433708582
When the start position of a MediaPeriodInfo is equal or higher than the duration,
we set the start position to `duration - 1` to end on the last frame. With server
side inserted ad streams, this has the effect that we actually need to seek back to
the last content frame after a post-roll.
This is desirable when actually ending on that frame but produces a BUFFERING event
when transitioning from an SSAI stream with a post-roll to the next media item in
the playlist. This change sets the start position to the duration when we are
clipping the last content period of an SSAI stream that is played in a playlist.
PiperOrigin-RevId: 433445680
This makes the reading period advance early as expected at the end of an ad
period. Before this change the reading position of the metadata renderer
prevented advancing the period until metadata arrived after the start position of
the following period. Only then the reading position of the metadata renderer
is updated and beyond the start position of the following period which is a
condition to advance the reading period.
Because transitioning to the next period is a virtual transition and the
SharedMediaPeriod keeps reading from the same underlying sample streams, the
metadata renderer can safely be ignored for this check.
#minor-release
PiperOrigin-RevId: 432646037
We will be migrating our track selection UI components to be
based on TracksInfo. We need DownloadHelper to expose TracksInfo
to make it compatible with such components.
PiperOrigin-RevId: 432474487
addTrackSelectionForSingleRenderer takes a list of legacy overrides,
which are then set on the supplied parameters one at a time to run
track selection. This allows multiple overrides for a single track
type to be applied in the download use case, despite it not being
possible to place such overrides directly into a single parameters.
For new style overrides, multiple overrides for the same track type
can be placed directly into a single parameters. Therefore we'll be
able to replace use of addTrackSelectionForSingleRenderer with use
of addTrackSelection, which is a much cleaner API. For this to work,
we need to make DownloadHelper apply multiple overrides in this case.
PiperOrigin-RevId: 432459834
This method is no longer needed since we added SubtitleConfiguration#id
in 59d98b9a4e.
Issue: google/ExoPlayer#10016
#minor-release
PiperOrigin-RevId: 432169262
DownloadHelper is in the ExoPlayer module, so there's no reason
why it can't use ExoPlayer specific track selections. That said,
we want our UI components to operate on generic
TrackSelectionParameters, and we want such UI components to be
useful for selecting tracks for download. To keep this interop,
it's necessary to have DownloadHelper accept generic
TrackSelectionParameters, or to require application code to
convert them. The first approach seems preferable!
PiperOrigin-RevId: 432158846
This constructor always does the wrong thing for non-adaptive groups
containing more than 1 track, because it'll incorrectly generate an
adaptive selection. Replace it with a constructor for specifying a
single track within the group instead.
PiperOrigin-RevId: 431673458
As evidenced by the somewhat awkward logic in PlayerControlView, the
previous design wasn't very friendly to expected usage. There will be
more usage when the track selection dialog components are migrated,
which would be similarly awkward without this change.
PiperOrigin-RevId: 431407675
*** Original commit ***
Rollback of caf62842c4
*** Original commit ***
Rollback of c2cb22a056
*** Original commit ***
Rollback of 1521e50307
*** Original commit ***
PiperOrigin-RevId: 430905772
The AsyncronousMediaCodecAdapter should call MediaCodec.start()
on the same thread it calls MediaCodec.flush(), i.e. the playback
thread. This change removes the experimental flag that allowed
calling MediaCodec.start() from the callback thread.
The flag was flipped to true already.
PiperOrigin-RevId: 430689665
getCurrentTrackGroups and getCurrentTrackSelections are
retained for now, but moved from Player to ExoPlayer, to
ease the transition for some application code that currently
uses these methods.
PiperOrigin-RevId: 430036355
*** Original commit ***
Rollback of c2cb22a056
*** Original commit ***
Rollback of 1521e50307
*** Original commit ***
Wire up MediaMetricsListener and add configuration to...
***
PiperOrigin-RevId: 429585773
