We stopped using using this MIME type in
74a9d8f680
This broke subtitle decoding in some cases (Issue: #7985), which I
fixed in
7b8895d655.
After some discussion we've decided SubtitleDecoderFactory shouldn't
depend on Format.containerMimeType (since the samples have already been
extracted by this point, so the container shouldn't matter). So this
change fixes DashManifestParser to use MimeTypes.APPLICATION_MP4VTT (and
reverts the no-longer-needed SubtitleDecoderFactory change).
PiperOrigin-RevId: 336668450
TestExoPlayerBuilder can be used from both emulator and robolectric
tests, TestPlayerRunHelper uses Robolectric Looper behaviour, meaning
it can be moved to the robolectricutils module in a follow-up change.
PiperOrigin-RevId: 336634225
Adjusted the bottom layout of StyledPlayerControlView :
- Enlarged bottom button's height to make tapping easier.
- Extended greyed background area to upper edge of seekbar.
- Gave padding between bottom edge of the overall layout and bottom buttons.
- Reduced horizontal margins between bottom buttons.
PiperOrigin-RevId: 336041160
Previously, the overflow button was always shown at the bottom in StyledPlayerControlView
and hided the settings cog even when there is enough space.
With this change, the settings cog moves out from overflow and
the overflow button is shown only when the buttom space is not enough.
PiperOrigin-RevId: 336029179
Experiments showed the timeout is beneficial to avoid ANRs and
we can thus enable the feature by default.
Also add configuration to set the timeout if required.
Issue: #5887
PiperOrigin-RevId: 335652506
Using a timeout prevents ANRs in cases where the underlying platform
gets blocked forever, so we enable this feature by default.
Issue: #4352
PiperOrigin-RevId: 335642485
This is in preparation for supporting playlists of ads media sources using
ImaAdsLoader.
Existing ways of passing ad tags should still function but are deprecated (and
won't be supported with playlists).
Issue: #3750
PiperOrigin-RevId: 335618364
`subtitle` is only guaranteed to be non-null if
`nextSubtitleEventIndex != C.INDEX_UNSET`. The null check added in
0efec5f6c1
was too early.
Issue: #8017
PiperOrigin-RevId: 334777742
This was broken by 74a9d8f680
because DashManifestParser switched to setting Format.sampleMimeType to
text/vtt while SubtitleDecoderFactory was still expecting
application/x-mp4-vtt. This change teaches SubtitleDecoderFactory to
check both Format.containerMimeType and Format.sampleMimeType.
I'll investigate a follow-up change to remove
MimeTypes.APPLICATION_MP4VTT completely (it's currently still used in
AtomParsers).
Issue: #7985
PiperOrigin-RevId: 334771672
In the test, a real instance of SimpleExoplayer plays two identical Mp3 files.
The GaplessMp3Decoder will write randomized data to decoder output on receiving
input. The test compares the bytes written by the decoder with the bytes
received by the AudioTrack, to verify that the trimming of encoder delay/
padding is correctly carried out.
Test mp3 has delay 576 frames and padding 1404 frames. File generated from:
ffmpeg -f lavfi -i "sine=frequency=1000:duration=1" test.mp3
This change needs robolectric version 4.5, which is not currently released (2020 Sep 30).
PiperOrigin-RevId: 334648486
When I moved ParsableByteArray#data behind a getter I replaced some
assignments with calls to reset(byte[]):
ce2e6e2fd6
reset(byte[]) deliberately sets `limit` to `data.length`, in order to
handle cases that were reassigning `data` but not updating `limit`.
However OggPacket was already using `limit` to track where to write
'new' data into the array, so changing `limit` to `data.length` caused
us to try and write new data beyond the end of the array.
I looked at other uses of reset(byte[]) in ce2e6e2fd6
and condluded the only other usage in MatroskaExtractor is legit and
shouldn't be updated like this (because MatroskaExtractor previously
*wasn't* correctly updating/maintaining `limit`).
Issue: #7992
PiperOrigin-RevId: 334601586
Non-realtime AudioTrack playback speed was not taken into account when
extrapolating the old mode's position, causing the position not to
advance smoothly.
This should be a no-op when not using AudioTrack playback params for
speed adjustment.
Issue: #7982
PiperOrigin-RevId: 334151163
Remove the SynchronousMediaCodecBufferEnqueuer interface
since we only keep the AsynchronousMediaCodecBufferEnqueuer
implementation.
PiperOrigin-RevId: 333701115
Retry AudioTrack init and write for 100ms before
giving up and aborting playback.
This was tested by throwing every 2 init/write and
making sure playback did not stopped.
#exo-offload
PiperOrigin-RevId: 333536841
This issue has been observed on a test app stress
testing setEndOfStream.
The issue has not been observed on ExoPlayer,
probably due to timing differences, but it is fixed
preventively.
#exo-offload
PiperOrigin-RevId: 333472136
This seems to be an exact copy of sample.adts. Update the test to use
the same sample but just output to a different dump file.
PiperOrigin-RevId: 333469714
We have a workaround for uneven sample stream durarions in playlists that
assumes a renderer allows playback if it's reading ahead or waiting for
the next stream.
652c2f9c18 changed this logic to no longer require to
wait until the next stream is prepared due to a change in how we advance
media periods in the queue. However, the code falsely still requires the
next stream to exist (even if it's not prepared). This can cause a stuck
buffering state when the difference in the duration of the streams is more
than what we buffer ahead because we never create the next stream in such
a case.
Note: DefaultMediaClock.shouldUseStandaloneClock has roughly the same logic
and also doesn't require the next stream to be present.
Also fix a test that seemed to rely on this stuck buffering case to test
stuck buffering detection. Changed the test to not read the end of stream
to ensure it runs into the desired stuck buffering case.
Issue:#7943
PiperOrigin-RevId: 333050285
This allows to use the same logic from multiple places without duplicating
it, encapsulates in its logical place, and allows to change the available
segments based on the new availabilityTimeOffset value.
The overall effect of this change is a no-op.
PiperOrigin-RevId: 333044186
Without this patch, playback would be frozen indefinitely
until the user manually pauses and unpauses it.
This has the side effect of disabling offload until
the next stop due to the workaround of
disabling offload when it encounters a failure.
As an audio server crash is considered very
infrequent, especially in stable conditions like
an audio only playback, it is unlikely that disabling
offload is an issue.
PiperOrigin-RevId: 332857094
I didn't copy-paste the whole of
https://github.com/google/guava/wiki/UsingProGuardWithGuava because
this line seems relevant based on our current usage.
Lots of that file seems to relate to classes that are strongly
discouraged on Android:
https://github.com/google/guava/wiki/Android#specifics
I've only added this to the `common` module, since everyone that uses
ExoPlayer must depend on that. This avoids duplicating this line into
every module that has a Guava dependency.
Also remove some other warning suppressions that are defined in both
`core` and `common`.
Issue: #7904
PiperOrigin-RevId: 332203086
This value is needed to figure out the last available segment for
low-latency live streaming. It may be present in each BaseURL tag
and each SegmentList or SegmentTemplate, with the latter one taking
precedence.
The value is saved as part of MultiSegmentBase where it will be used
to retrieve the last available segment index in future changes.
PiperOrigin-RevId: 331809871
This test is intended to check that DefaultLoadControl will cause
playback to fail as "stuck buffering" rather than OOM-ing, in the
case that its target buffer size is reached and playback still
hasn't started.
Unfortunately, the target buffer size is ~130MB, and when running
on some setups an OOM actually ends up happening before this much
memory is allocated.
This change makes the target buffer size much smaller to avoid the
problem.
PiperOrigin-RevId: 331748208
This may remove available memory from other tests running in the same
process. Instead, create the huge buffer when needed so it can be GCed
immediately.
PiperOrigin-RevId: 330960844
When passing in ExtractorFactory instances to SimpleExoPlayer.Builder or
DefaultMediaSourceFactory, we currently need to pass in one other
instance (RenderersFactory or DataSource.Factory), that developers will
often set to its default. To avoid specifying these defaults, these new
convience methods allow to just set the ExtractorsFactory if required.
PiperOrigin-RevId: 330908002
This allows to customize extractor flags more easily when setting up the player.
In addition, we need to provide a way to pass in the ExtractorFactory through
the constructor chain starting in SimpleExoPlayer so that removing the
DefaultExtractorsFactory is possible for R8.
PiperOrigin-RevId: 330472935
- Use a setter, which is consistent with how other optional
components are passed.
- Remove nesting where a provider provides another provider.
Since AdSupportProvider then only provides one thing, it
can be renamed to AdsLoaderProvider, which more clearly
expresses what it provides.
PiperOrigin-RevId: 330396334
- Prevent buffering when clicking ffwd button at the end of stream
- Set VR button disabled when listener is not registered
PiperOrigin-RevId: 330039336
In maybeInitCodecWithFallback, it caches availableCodecInfos with mediaCryptoRequiresSecureDecoder and inputFormat as inputs, and won't clear it if shouldInitCodec is false, resulting in a case where availableCodecInfos is not null and codec is null.
When we have a new format, it's reasonable to clear availableCodecInfos if codec is null. Otherwise we might not be able to properly initialize a new codec.
PiperOrigin-RevId: 329971796
