Where a device has this issue, it most likely applies to all
SOC vendor provided decoders, which are normally the only
video decoders other than the OMX.google software decoders
on the device. The fact we currently only blacklist for AVC
decoders is likely just a side effect of AVC's popularity.
I checked two devices already on the blacklist, and both
failed with other SOC vendor decoders on the device as well
(but passed if forced to use OMX.google decoders instead)
Issue: #4468
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203728285
Viewport constraints apply to adaptive content even if the
actual playback isn't adaptive (i.e. because the selector
ends up making a fixed track selection).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203726831
- Support handling frame queries (i.e get frames at times, output to certain
sizes) from MetadataRetriever.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203489788
If there is only one track, we can assume that both boxes refer to the same track
even if the track indices don't match.
Issue:#4083
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203485872
MediaDrm.provideXResponse methods only accept the response
corresponding to the most recent MediaDrm.getXRequest call.
Previously, our code allowed the following incorrect call
sequence:
a = getKeyRequest
b = getKeyRequest
provideKeyResponse(responseFor(a));
This would occur in the edge case of a second key request
being triggered whilst the first was still in flight. The
provideKeyResponse call would then fail.
This change fixes the problem by treating responseFor(a)
as stale. Note that a slightly better fix would be to
defer calling getKeyRequest the second time until after
processing the response corresponding to the first one,
however this is significantly harder to implement, and is
probably not worth it for what should be an edge case.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203481685
Both boxes should contain the same list of track indices. However, if only one
track index in each list does not match, we can just assume that these belong
together.
Issue:#4477
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203481258
Since this is an ongoing problem, it's reasonable that we allow
developers to toggle these workarounds without too much hassle.
Issue: #4468
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203364488
This allows to register a listener on an outer wrapping data source which
receives data transfer events from the wrapped source.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203358981
This wires up recent changes of passing a transfer listener to the MediaSource and
allowing DataSources to accept new listeners.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203280818
Add supports for reading duration for a TS stream by reading PCR values of the PCR PID packets at the start and at the end of the stream, calculating the difference, and converting that into stream duration.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203254626
Codec initialization may fail in creation, configuration or when start()ing the
codec. If codec initialization fails, there may be other codecs available that
could handle the same format, but currently ExoPlayer can only try to use the
first listed codec for the input format and gives up if it fails to initialize.
This change implements support for optionally falling back to alternative
decoders if initialization fails. MediaCodecSelector can now return a list of
decoders to try in priority order, and use the Format when choosing a codec.
With the default implementation, the codecs and order come from MediaCodecList,
and matches the order used internally by MediaCodec.createDecoderByType (which
implements the same kind of fallback though only to the creation step, without
configuring/starting the codec).
This feature is useful for apps that want to play several videos concurrently on
devices that have software decoders (like OMX.google.h264.decoder), as the new
behavior allows new codecs to be created when no hardware-accelerated decoders
are available.
The list of available codecs is queried when initializing the codec after a
format change that requires a new codec to be instantiated. When a decoder fails
to initialize it is removed from the list of available decoders and won't be
tried again until the next format change (or until the renderer is disabled).
Note: this change does not affect the renderer capabilities API, as when
checking format support we don't know which codec will be used.
Issue: #273
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203242285
This ensures compatiblity of other apps depending on our public GitHub code.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203129076
This allows implementations to notify when the transfer is about to be started.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203102117
This allows all leaf data sources (i.e. ones which do not forward the requests
to other data sources) to accept multiple listeners.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203097587
This allows to use this queue in the track selection in the future.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202954871
This will allow to provide available information about future chunks to the
track selection.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202940994
The Android Test Support Library is being renamed to AndroidX Test, with its root java namespace changing from android.support.test to androidx.test.
And code location changing from tp/android/android_test_support to tp/android/androidx_test.
More information: []
TAP global presubmit: []
BUG:
79205333
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202796842
The new method allows to add transfer listeners (e.g. the BandwidthMeter) after
the data source has been created. To simplify the implementation for
subclasses, this change also introduces a BaseDataSource which handles
the list of listeners and the listener registration.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202649563
In the future, this allows to register the BandwidthMeter (managed by the player)
as a listener to all media transfers related to this media source.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202643946
- Extract ConstantBitrateSeeker from Mp3 package into a more general
ConstantBitrateSeekMap.
- Use this seekmap to implement seeking for AMR format.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202638183
It's quite hard to find the defaults currently. Placing them
on each variable makes them easier to find.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202495929
Currently, we are discarding all TS PES payload readers on seek. This is to fix
a bug that makes PES stream readers read packets inconsistently after seeking (first
time, the readers ignore all packets before PMT, second seek time after PMT is
read, the readers will read all packets before PMT).
This works fine if we don't support seeking to arbitrary position within the TS
stream. However, this may lead to a problem if we want to support seeking, because
some TS streams only have track format at the begining of the stream, and reseting
the payload readers after seeking can lead to track format not available anymore.
This change reverts the original fix (do not discard TS PES payload readers on seek
anymore). Instead, in non-HLS mode, after we have processed all PMTs packets in
the strea, we will re-seek to the beginning and perform readin again to make sure
the result will be consistent across multiple seeks. This is a prepare step to
support seeking in TS streams.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202466233
This url is readily available when creating media source events (from the
data source) but so far not published to external listeners. This change
adds a new field to LoadEventInfo which corresponds to DataSource.getUri().
Issue:#2054
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202459049
Currently we immediately stop searching after we found one video and one
audio track. This change adds some leeway to detect additional tracks.
Issue:#4406
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202455491
Also moved shared code to SegmentDownloadAction between its subclasses.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202294880
When getMedatadata from an ExtractorMediaPeriod, due to the MediaPeriod refreshing its Timeline twice, the MetadataRetriever may wrongly reset periodIndex of the current trackGroup to C.TIME_UNSET, which makes it unable to handle subsequent metadata queries.
This CL changes the MetadataRetriever to keep track of periodUid of the current trackGroup instead of period index. PeriodUid is not changed on timeline refreshing, so is not prone the existing problem.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=201969350
Refactor sniff(), and extract a few methods out from read() to make it look clearer. This CL does not change any functionality.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=201933207
The DefaultAnalyticsListener was added for selective overrides. Now that Java 8
support is enabled, these selective listener overrides can be implemented
more easily and more flexible using default methods.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=201931770
The DefaultEventListener was added for selective overrides. Now that Java 8
support is enabled, these selective listener overrides can be implemented
more easily and more flexible using default methods.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=201695490
Both values are helpful for event reporting, but are only available while
the data source is open. Similar to bytesLoaded, they need to be reported
through the Chunk.
Issue:#2054
Issue:#4361
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=201664907
This will make it possible for ImaAdsLoader to access the player volume when
used with SimpleExoPlayer.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=201664189
Replace assertThat(a >= b).isTrue() with assertThat(a).isAtLeast(b) because it
reads more natural, and in case the assertion fails, it will print out the
actual values to help debugging.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=201371993
Currently, the looper of the thread the player is created on is used (or the
main looper if this thread doesn't have a looper). To allow more control over
the threading, this change lets users specificy the looper which must be used
to call player methods and which is used for event callbacks.
Issue:#4278
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=201331564
Also switch from using a CommentFrame to a new InternalFrame type for ID3 data
stored with ID '----', to distinguish internal data from actual ID3 comments.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=201315254
Added a capturer that can capture output from video renderer into bitmaps. This
class uses SurfaceCapturer to setup a surface, then configures this surface as the
output for a video renderer. Once the output is set, it will capture the
output frames from the video renderer and return them as bitmaps.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=201148184
This replaces the workaround calculation which was needed before the
referenced bug was fixed.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=200217241
The helper method only reported DATA_TYPE_UNKNOWN even if the actual type
is known.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=200067296
Currently only the buffered position in the current media period can be queried.
To achieve this, we save the buffered positions of all MediaPeriods to the
PlaybackInfo together with a list of MediaPeriodIds. ExoPlayerImpl can then
determine the correct buffered position for multi-period windows and windows
with midroll ads.
In addition, this change adds two new convenience methods to the Player interface
to query the total buffered duration across all windows and to get the buffered
duration of the content while playing an ad.
Issue:#4023
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=200041791
This allows the AnalyticsCollector to register itself as a VideoListener to
get these updates automatically instead of relying on the user to provide
updates.
The ViewportSizeReporter was amended to do the pixel to dp conversion itself.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199796532
It doesn't really serve a purpose and is not automatically triggered.
Apps need to trigger it manually through
AnalyticsCollector.notifyNetworkTypeChanged which is easy to forget.
Moreover, the current network type can be obtained by Util.getNetworkType
at any time when it's needed without the need for a listener.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199790033
Allows DrmInitData to carry a license server URL when the media declares one.
Issue:#3393
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199643743
This reports video and audio format selections.
See [] for spec details.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199627176
This allows to detect changes in the surface size. SimpleExoPlayer already
has the necessary listeners to report size changes for all surfaces whose
lifecycle are managed by SimpleExoPlayer.
In a subsequent change, AnalyticsCollector can be registered as a
VideoListener to automatically notify of surface size changes.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199605434
Using new Handler(this) in a constructor potentially leaks an uninitialized
object. This is mostly not a problem because we don't use the Handler within
the constructor. Added a Util method to keep the warning suppression local.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199605377
When switching from Stack to ArrayDeque, calls to add() need to be replaced by
calls to push() because ArrayDeque treats the first element in the list as the
top of the stack.
String.split() has counterintuitive default behavior; see
https://github.com/google/error-prone/blob/master/docs/bugpattern/StringSplitter.md.
I've switched usages to pass limit = -1 argument, which means empty elements are
no longer removed from the end of the returned array.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199472592
Currently, we are using 2 copy steps for PixelCopySurfaceCapturerV24:
- Copy from the source surface to a similarly sized bitmap (using PixelCopy API).
- Copy from the bitmap to a scaled bitmap, based on the given output size, using scaledBitmap API.
This CL merges the 2 steps and uses PixelCopy API to perform copy directly from
the source surface to the bitmap of the given output size.
However, since our test uses scaledBitmap API to create reference bitmap from original image, due to various Bitmap copy optimizations (filtering, antialiasing etc...) that are different between PixelCopy API and scaledBitmap API implementations, the result images cannot be the same. We can perform the our tests by asserting that their PSNR value is very high, which means they are very similar.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199472005
This enabled the player to specify the bandwidth meter after the track
selector and the track selection factory have been created.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199286400
The implementation keeps track of QoE sessions and forwards events to the
field reporters of the relevant sessions.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199269574
If a MediaPeriod uses a Loadable, then there are typically
reference chains of the form:
LoadingThread[GCroot]->Loadable->MediaPeriod->Player
Where the player is the MediaPeriod callback. When the
player is released, this reference chain prevents the
player from being GC'd until Loadable cancellation
completes, which may not always be fast. This in turn
will typically prevent the application's activity from
being GC'd, since it'll normally be registered as a
listener on the player (directly or indirectly via
something like a view).
This change mitigates the issue by removing references
that the MediaPeriod holds back to the player. The
MediaPeriod will still not be eligible for GC, but the
player and application activity will be, which in most
cases will be most of the leak (in terms of size).
Issue: #4249
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199143646
This happens when the device screen is locked.
This fixes a previous attempt to fix the problem.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199130325
This will allow the player to obtain the transfer listener used by the
bandwidth meter in order to pass it automatically to the relevant data
sources.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199124880
This helps to use the AnalyticsCollector without SimpleExoPlayer. Currently,
that may be problematic, if the contructor needs the player, but in order to
create the player, one already needs the AnalyticsCollector as a listener for
the renderers.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199105012
A CacheKeyFactory can be passed to the CacheDataSource constructor, allowing clients to dynamically generate a custom cache key for any given upstream uri.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198878723
This simplifies Loadable implementations, and also removes the
possibility of an incorrect Loadable implementation causing the
wrong Loader.Callback method being called (perviously, for the
correct method to be called, we relied on isLoadCanceled being
implemented correctly).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198871133
There is the small (but unlikely) chance that the uids clash because the
Objects have the same hash code.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198855724
This adds an optional parameter to ConcatenatingMediaSource to prepare
child sources only lazily when are needed. This is helpful for long playlists
of media sources with manifests to prevent a lot of simultaneous manifest
loads.
Issue:#3972
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198855676
The bug here was that we'd create a VideoFrameReleaseTimeHelper
using whatever context DefaultRenderersFactory has, and it would
then hold a reference to that context via DisplayManager. A leak
could then occur if the player outlived the life of the context
used to create it (which would be strange/unusual, but not
impossible).
Issue: #4249
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198747599
As highlighted by the ref'd issue, we can end up with
memory leaks if Loadable.load implementations take a long
time to return upon cancelation. This change cuts off one
of the two problematic reference chains.
This doesn't do much about the ref'd issue, since there's
a second reference chain that's much harder to deal with:
Thread->LoadTask->loadable. But since it's easy just to
cut this one off, I figure it makes sense to do so.
Issue: #4249
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198735386
This makes the requirement that all calls are made on one thread more
explicit and also mentions this in the Getting Started guide.
Issue:#4278
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198694579
Set content length and redirect uri in a single transaction.
New: Fixed the code where DataSpec.uri is set to null in []
Automated g4 rollback of changelist 196765970.
*** Reason for rollback ***
Fixed the code where DataSpec.uri is set to null in []
*** Original change description ***
Automated g4 rollback of changelist 194932235.
*** Reason for rollback ***
This CL breaks the playability of Mango's offlined progressive videos.
*** Original change description ***
Set content length and redirect uri in a single transaction
NORELNOTES=true
NO_BUG
***
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198370211
When the player state is changed from an event listener callback, we may
get recursive listener notifications. These recursions can produce a wrong
order, skip or duplicate updates, and send different notifications to
different listeners.
This change serializes listener notifications by clustering all update data
in a helper data class and adding the updates to a queue which can be handled
in a loop on the outer layer of the recursion.
As playWhenReady updates also reference the current playbackInfo, we need to
redirect the listener notifcations for setPlayWhenReady to the same queue.
Issue:#4276
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198031431
Use PixelCopy API for the first SurfaceCapturer implementation. This supports
devices from API 24+.
Github: #3609.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=197732711
Some module/extensions couldn't use the static test so far because all files
needed to be put on the blacklist. To ensure the test it set up for all
modules, this fixes at least one file for each of the modules.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=197731449
InstrumentationTestCase has been deprecated, and it does not offer some useful
features, such as targeting SDK version level for tests, or skipping tests if
necessary.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=197141082
A new playback nonce is created for each playback of the same item. Thus we
need to inject the nonce dynamically into the data source factory.
This CL adds the DataSource which does the actual insertion into the request
URLs and a MediaSource which listens to new media periods, to request the
nonce and to configure the data source factory for this media period to use
this nonce.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=197134217
For TTML, if the font size is expressed in %, the font size should be relative
to the cellResolution of the document which we did not support before. This CL
adds support for handling this correctly.
Note that this still does not support font size using c unit.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196985694
SparseIntArray.get(key) defaults to zero for missing keys (the null check was
left over from when a Map was used).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196957452
Due to a bug, for each TTML node, when applying its style to the encompassed
regions, it applies child nodes's styling several time for each region (the
number of time is equal to the number of region). This leads to a styling issue
if there are multiple regions in a node displayed at the same time in TTML file.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196810046
The sample size from the stsd box takes precedence over the sample size in the
stsz box.
Also remove assumption that C.INDEX_UNSET is -1 in ChunkIterator (which is a
no-op change).
Issue: #4228
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196661751
Added FlacBinarySearchSeeker, which supports seeking in a FLAC stream by searching for individual frames within the file using binary search.
Github: #1808.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196587198
Fix suppressing initial "state changed to paused" listener invocations
for new added tasks that are immediately started.
Notify listeners for loaded actions queued state if they are not started
immediately.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196542693
The lint error suppression only works locally and not for external developers
who still see the lint error and need to suppress it themselves.
This changes 'implementation' to 'compileOnly' in gradle to prevent the
dependency from being exported. Also removes the local lint suppression.
Issue:#4234
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196251407
This makes way for reusing EGLSurfaceTexture in other places, such as metadata
and frame retriever.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196240576
Also only listen to requirements when actually necessary, else we can
put the service into the foreground when it needn't be there.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195597750
This type of flicker was visible (at least on my S8) whenever starting
the demo app process (from being properly killed) when other notifications
(e.g. completed download notification) was present.
This change passes whether the service was started as foreground through
the intent, and only applies the show-notification-on-stop hack if it
was. It's only necessary to start as foreground if your app is not already
in the foreground, so it's not necessary to do this from activity/ui
components.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195594930
If an app wants to reconcile its own state with that of a DownloadManager,
it's helpful to know when the DownloadManager has finished restoring any
previously persisted tasks.
Also suppress initial "state changed to paused" listener invocations for
tasks that are immediately started.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195594881
- Start before stop
- Release near bottom
- Private after public
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195570480
Also convert them to exposing periods and track groups, like
regular MediaSources do. This gets us much closer to being
able to use standard track selection components during offline
initialization. The helper is responsible for reverse mapping
selected tracks onto physical streams when generating the
download action. This is trivial except for the HLS case, which
is a TODO for now.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195500826
This may be preferable for using custom binary data,
and it's still easy to store Strings if needed.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195486817
The old event listener on AdsMediaSource is deprecated, in favor of
reporting in the normal way (via MediaSourceEventListener).
Add AdLoadException with information on what ad/ads failed to load.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195426144
- Support handling metadata queries (a.k.a get TrackGroupArray, which contains
Format and associated Metadata) from MetadataRetriever.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195401204
Upstream components may incorrectly clear the interrupted flag and not
propagate an exception when the caching thread is interrupted due to
cancellation. Pass a settable flag down to CacheUtil.cache and check it
frequently so it's not necessary to rely on the interrupted flag.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195371244
This avoids the interrupted flag being lost if the exception
is handled as an IOException.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195366244
- Made parts of DownloadActions public that were previously hidden.
This is necessary so that when an app is listening to the
DownloadManager, it can tell something about the tasks.
- Simplified DownloadActivity some more. The helpers may migrate
into their corresponding modules at some point, and also be
converted to return structured TrackGroupArrays rather than a
flat list of Formats.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195269824
This includes only the (hopefully) non-debatable changes for the DASH module
and all needed changes for call into the core library.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195097791
A single master version prevents app developers from providing
custom download functionality (because they can't increment the
version). It's also error prone to expect someone modifying the
DASH action to remember to update the ActionFile master version.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194981886
Ad load errors will be forwarded as media source load errors in the future
and other ad events are not actually player related to warrant reporting
them as part of playback analytics.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194936656
This was adding a lot of code, and the multiple use cases
for Downloader was pretty confusing (in particular the
ordering of method calls was unclear). It's also not
performant (e.g. it requires loading/parsing manifest(s)
and initialization segments from disk).
In practice I think apps will need to keep a record of
what's offlined in their app's database (or equivalent),
which they can update by registering as a listener on
DownloadManager. This will be done for the demo app in
a subsequent change.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194932876
- It's much cleaner to split completed/error notification methods.
- Make error notification show the content title in the demo app.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194920507
It's no longer necessary to stash a reference to the
error yourself. This also correctly handles the case
where setPlayer is called with a player that's already
in an error state.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194828387
This change is intended to resolve overloading of "Download",
where a DownloadTask could be an actual download task, or a
remove task.
Also cleaned up some documentation.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194815058
- Redefine Scheduler interface to better describe what implementations
do. The previous version was too general, in that it allowed concrete
DownloadService implementations to pass different Requirements to
the base class and to the Scheduler. It's also difficult to see how
that version could ever support dynamic updates to Requirements, which
is probably a feature we'll need to add quite soon.
- Fix a (probably theoretical) problem where static fields in
DownloadService assumed only a single concrete implementation.
- Stop using PlatformScheduler pre-API-21 in demo app, because it will
fail.
- Define default Requirements that require network.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194785751
- It's wasted effort
- DataSpec reconstruction fails because creating a DataSpec with 0
length isn't allowed.
- Also better document DataSink open/close, to be like DataSource.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194778132
This replaces the existing listeners and provides some additional meta data
for each event.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194770421
- Add ACCESS_NETWORK_STATE to core library. It seems fairly fundamental. We should
also be using it elsewhere (e.g. to fail fast if there's no network).
- Add annotation to force apps using PlatformScheduler to declare RECEIVE_BOOT_PERMISSION
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194763051
- When calculating the downloaded percentage in DASH, there was no
way to disambiguate between 0 of 0 segments being downloaded because
there are no cached indexes (i.e. 0% downloaded) and 0 of 0 segments
being downloaded because the index defines 0 segments (i.e. 100%
downloaded).
- Also replace use of NaN with a named constant.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194453202
Supports extracting data from AMR container format for both narrow and wide
band formats. Also added AmrExtractor as one of the default extractor to be
used in DefaultExtractorsFactory.
GitHub: #2527.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194407507
When we play downloaded content, we rely on the manifest filters
to produce a manifest that contains only the content that was
downloaded. It makes sense just to use the same filters during
download too, so we don't have to worry about any implementation
differences.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194380704
- clone() wasn't performing a deep enough copy
- Sort tracks in overrides to improve equals check
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194220596
ProgressiveDownloader never implemented this properly, and we
don't use it in DownloadManager/DownloadService, both of which
use a polling model. A polling model is also what's used elsewhere,
for example to query the current playback position.
This is effectively doing the TODO in ProgressiveDownloader.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194214579
This removes a fair chunk of code. The line delta would
be more negative if it not for adding all the /* x= */
comments in DashDownloadActionTest!
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194136689
Using addAnalyticsListener provides the same functionality with additional
information.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194071893
Some of the events are emitted by the media periods itself and their index may
not be available in the publicly accessible timeline yet.
To prevent this, we currently check for timeline.isEmpty() only. But this may
also happen for dynamic changes, e.g. when new sources are added in fast
succession and a manifest for one of the new sources starts loading before the
updated timeline is reported.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194057401
Playback will still fail if an input sample is larger
than 32K, but will now fail gracefully.
Issue: #4057
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193951955
Also move NotificationUtil from the UI module to the core module.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193941401
- This is needed to make DefaultTrackSelector properly thread
safe, and enable atomic changes to the selector that, for
example, disable a renderer and enable another one at the same
time.
- This change also saves/restores parameters and the start
position in PlayerActivity, resolving the ref'd issue.
Issue: #3915
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193913350
This may differ from the format MIME type for audio/eac3-joc.
Issue: #4165
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193906521
This makes DownloadService easier to use in general and when only single
notification is used for all downloads.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193165982
