This allows more efficient range removals and is consistent with addition,
which supports adding multiple elements in a single operation.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=222396310
Currently no path may be chosen if
minBufferUs == maxBufferUs == bufferedDurationUs.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=221639199
- Increase the search window size to fix TS seeking for problematic
media we've had provided to us.
- As per my comments on the issue, we should look at doing more here
to better fix the problem. This will solve the worst of the
immediate problem, however.
- The memory usage is non-trivial, particularly with the increased
search window size. I've made the allocations only live whilst
determining duration and seeking to address this. I've done the same
for PS just for consistency.
Issue: #5097
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=221449988
This fixes an issue where disabling audio focus handling
while audio focus is held would not release audio focus.
A new test was added for this situation.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=220316866
This prevents leaving an inconsistent state after a EOF exception.
Issue:#5039
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=219785275
In ConcatenatingMediaSource, the source may be removed before it started
preparing (this may happen if lazyPreparation=true). In this case, we
shouldn't call releaseSource as the preparation didn't start.
Issue:#4986
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=218141658
This removes the experimental bandwidth meter and uses it as the new default.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215404065
This makes the following changes to improve consistency among the PlaybackInfo
values:
1. Update buffered position and total buffered duration after loading period
is set as both values are affected by a loading period update.
2. Add copyWithPosition to allow updating the position without resetting the
loading period.
3. Forward the total buffered duration to playing position updates
as it may have changed with the new playing position.
Issue:#4899
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215712328
If we prepare a deferred media period before the actual timeline is available,
we either prepare with position zero (= the default) or with a non-zero
initial seek position.
So far, the zero (default) position got replaced by the actual default position
(including any potential non-zero window offset) when the timeline became known.
However, a non-zero initial seek position was not corrected by the non-zero
window offset. This is fixed by this change.
Related to that, we always assumed that the deferred media period will the
first period in the actual timeline. This is not true if we prepare with an
offset (either because of an initial seek position or because of a default
window position). So, we also determine the actual first period when the
timeline becomes known.
Issue:#4873
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215213030
If a source is removed from the playlist, the player may still call createPeriod
for a period of the removed source as long as the new timeline hasn't been handled
by the player. These events are stale and can be ignored by using a dummy media
source. The stale media period will be released when the player handles the updated
timeline.
Issue:#4871
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=214787090
Not having this annotation may cause Kotlin implementations to fail.
Issue:#4802
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=212980643
If we can select a track that has a strictly higher score than a
selection already made for a renderer of the same type, we should
prefer it.
Issue: #4711
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=212835895
This allows to update the shuffle order after the ConcatenatingMediaSource
has been created. ShuffleOrder objects should be immutable to ensure thread
safety and thus there is no way to do this currently.
Issue:#4791
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=212443146
The default character set is always UTF-8 anyway on Android, but
we don't want our code to behave any differently where it's not
(e.g. robolectric test runs could potentially run in an environment
where UTF-8 isn't the default?).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=211953885
1. Currently, we may throw source info refresh errors while the previous media
period is still playing.
2. We don't throw if the next period in a playlist fails to prepare and the
previous renderers are all disabled.
3. We throw source info refresh errors for playlists before playback reaches
the culprit source.
This change:
1. Defers the exceptions until all existing media periods have been played.
2. Checks for period preparation exception if the next period is not
getting prepared and the renderer time reached the next period.
3. Does no longer throw from ConcatenatingMediaSource.maybeThrowSourceInfo
RefreshError. The deferred media periods take care of that for each source
individually.
Issue:#4661
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=211819436
To report DRM session metrics in the future as part of the listener, we need
a callback at the end of the drm session to get the final metric state.
For completion, the session acquired callback is also added.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=211328412
Also make some javadocs more consistent with the rest of the library.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=211071559
The current structure tries to associate events to media periods and windows
based on the reported values and the current timeline. However the reported
EventTime may not always be consistent in case the timeline doesn't contain
windows or media periods yet or not anymore.
The recent changes to MediaPeriodId allow to use it as a unique identifer for
media periods independent of the timeline. This enables more accurate tracking
of the media period queue and prevents reporting events with inconsistent
data.
Issue:#4492
Issue:#4634
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=210713120
This provides the list of currently buffered media chunks and iterators over
the potential next chunks to the track selection. Having these two parameters
enables more advanced decision logic based on this data.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=210551812
- Add @Deprecated on overrides of deprecated method.
- Suppress deprecation warnings where appropriate.
- Use non-deprecated alternatives where appropriate.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=210092434
This option is currently not available as a non-null adaptive track selection
has to be provided. Adds a parameter "forceHighestSupportedBitrate" which
corresponds to the default fixed track selection for audio and video.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=210073675
Some tests were flaky because of the PlayUntilPosition action which called
player.setPlayWhenReady from the wrong thread. Also fixed some other misc
flakiness.
ExoPlayerTest seems to be non-flaky now (tested with 10000 runs).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=209743076
The MediaPeriodId with index is only properly defined together with a
timeline containing the index. Changing it to the period uid allows to use
the MediaPeriodId independent of the corresponding timeline.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=209430257
This CL adds support for seeking witin TS streams by using binary search. For
any seek timestamp, it tries to find the location in the stream where PCR
timestamp is close to the target timestamp, and return this position as the
seek position.
Github: #966.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=207529906
- Use ConstantBitrateSeeker to implement seeking for ADTS format. Since most
ADTS streams are VBR, we use the average bitrate of the first 1000 frames as
the average bit rate.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=207509651
When user seeks to an unprepared period, since there is no period being played, currently the track groups and track selections are still the ones from previous period. This CL changes it so that when such seeking happens, PlaybackInfo's track groups and track selections are changed to empty.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206916109
