Once the value returned from AudioTimestampPoller advances, we
only need getPlaybackHeadPosition to sample sync params and
verify the returned timestamp. Both of these happen less often
and we can avoid calling getPlaybackHeadPosition if we don't
actually need it.
PiperOrigin-RevId: 512882170
Playback parameter signalling can be quite complex because
(a) the renderer clock often has a delay before it realizes
that it doesn't support a previously set speed and
(b) the speed set on media clock sometimes intentionally
differs from the one surfaced to the user, e.g. during
live speed adjustment or when overriding ad playback
speed to 1.0f.
This change fixes two problems related to this signalling:
1. When resetting the media clock speed at a period transition,
we don't currently tell the renderers that this happened.
2. When a delayed speed change update from the media clock is
pending and the renderer for this media clock is disabled
before the change can be handled, the pending update becomes
stale but it still applied later and overrides any other valid
speed set in the meantime.
Both edge cases are also covered by extended or new player tests.
Issue: google/ExoPlayer#10882
#minor-release
PiperOrigin-RevId: 512658918
MediaCodecRenderer currently has two independent paths to trigger
events at stream changes:
1. Detection of the last output buffer of the old stream to trigger
onProcessedStreamChange and setting the new output stream offset.
2. Detection of the first input buffer of the new stream to trigger
onOutputFormatChanged.
Both events are identical for most media. However, there are two
problematic cases:
A. (1) happens after (2). This may happen if the declared media
duration is shorter than the actual last sample timestamp.
B. (2) is too late and there are output samples between (1) and (2).
This can happen if the new media outputs samples with a timestamp
less than the first input timestamp.
This can be made more robust by:
- Keeping a separate formatQueue for each stream to avoid case A.
- Force outputting the first format after a stream change to
avoid case B.
Issue: google/ExoPlayer#8594
#minor-release
PiperOrigin-RevId: 512586838
Some devices were reported to have wrong PerformancePoint sets
that cause 60 fps to be marked as unsupported even though they
are supported.
Issue: google/ExoPlayer#10898
#minor-release
PiperOrigin-RevId: 512580395
The output info for a new stream is marked pending until the last
sample of the previous stream has been processed. However, this fails
if the previous stream has already been fully processed. We need to
detect this case explicitly to avoid signalling the output change one
sample too late.
#minor-release
PiperOrigin-RevId: 512572854
This test became flaky after ab7e84fb34 because some of the
unrealistic frame times ended up on the same release time.
Using realistic numbers avoids the flakiness.
PiperOrigin-RevId: 512566469
Protected system broadcasts should not specify the export flag.
Marking them as NOT_EXPORTED breaks sticky broadcasts in some
cases.
Issue: google/ExoPlayer#10970
#minor-release
PiperOrigin-RevId: 512020154
The current logic uses manual array operations to keep track of pending
changes. Modernize this code by using an ArrayDeque and a data class.
This also allows to extend the output stream information in the future.
This also fixes a bug where a position reset accidentally assigns a pending
stream offset instead of keeping the current one.
#minor-release
PiperOrigin-RevId: 511787571
When rendering frames at a rate higher than the screen refresh rate,
e.g. playing at 8x, the player is releasing multiple frames at the same
release time (nanos) which are then dropped by the platform. The output
buffers are available later and as a result MediaCodec cannot keep up
decoding fast enough.
This change skips releasing multiple video frames on the same vsync
period and proactivelly drops the frame. The frame is counted as skipped
rather than dropped to differentiate with frames dropped due to slow
decoding.
PiperOrigin-RevId: 510964976
This call may cause performance overhead in some situations,
for example if the AudioTrack needs to query an offload DSP
for the current position. We don't need to check this multiple
times per doSomeWork iteration as the value is unlikely to
change in any meaningful way.
PiperOrigin-RevId: 510957116
Rename ScaleToFitTransformation to ScaleAndRotateTransformation.
This better represents the operations that can be accomplished using this
effect. The name was originally named ScaleToFit* because it's not obvious how
to scale to fit using OpenGL, and this effect handled the scaling to fit in a way that no other MatrixTransformations did.
However, it's hard to discover how to rotate when skimming names of effects, so
it's probably more useful to convey that this effect rotates, than that it
scales to fit.
PiperOrigin-RevId: 510480078
Previously, any constructors instrumented by Robolectric were made public. This
caused two types of issues:
1) If Android classes had non-public constructors which were made public and
added to the Android API, Robolectric allowed tests to incorrectly use the
constructors on older SDK levels (where they were non-public). This most
commonly occurs for AccessibiltyEvent and AccessibilityNodeInfo.
2) When reflection was used to instantiate classes that were instrumented by
Robolectric, all constructors were accessible, which did not match what
happened when running on an Android test.
Update the instrumentation in Robolectric to prevent making all public
constructors.
PiperOrigin-RevId: 510049123
Tests in `SilenceSkippingAudioProcessorTest` used half as many short integers as needed for channel values when generating alternating silence/noise input. Fix this by passing left and right channel input.
PiperOrigin-RevId: 509188074
The AsynchronousMediaCodecAdapter's queuing thread stores any exceptions
raised by MediaCodec and re-throws them on the next call to
queueInputBuffer()/queueSecureInputBuffer(). However, if MediaCodec
raises and error while queueing, it goes into a failed state and does
not announce available input buffers. If there is no input available
input buffer, the MediaCodecRenderer will never call
queueInputBuffer()/queueSecureInputBuffer(), hence playback is stalled.
This change surfaces the queueing error through the adapter's dequeueing
methods.
PiperOrigin-RevId: 508637346
`TrackSelectorResult.rendererConfigurations` can contain null elements:
> A null entry indicates the corresponding renderer should be disabled.
This wasn't caught by the nullness checker because `ExoPlayerImpl` is
currently excluded from analysis.
#minor-release
Issue: google/ExoPlayer#10977
PiperOrigin-RevId: 508619169
Previously, Robolectric's instrumentation updated all constructors to be
public. This caused two main types of problems:
1) When non-public constructors were made public and added to the Android API,
Robolectric allowed tests to incorrectly use the constructors on older SDK
levels (where they were non-public). This most commonly occurs for
AccessibiltyEvent and AccessibilityNodeInfo.
2) When reflection was used to instantiate classes that were instrumented by
Robolectric, all constructors were accessible.
Fix issues across Google3 Robolectric tests that were affected by this issue.
A forthcoming change will fix the instrumentation in Robolectric to prevent
this type of issue from occurring.
Tested:
TAP --sample ran all affected tests and none failed
http://test/OCL:507861075:BASE:507805409:1675803313108:f2128fa4
PiperOrigin-RevId: 508087822
If a renderer error happens while processing readahead data for the
next item in the playlist, we currently throw the error immediately
and only set the item id in the error details. This makes it harder
to associate the error to the right item. For example, the user
facing UI is likely not updated to show the failing item when the
error is reported.
This can be improved slighly by force setting the position to the
failing item. The playback still fails immediately, but this can't
be avoided because the renderer itself went into an error state.
PiperOrigin-RevId: 507808635
The AudioTrackPositionTracker needs to correct positions by
the speed set on the AudioTrack itself whenever it makes
estimations based on real-time (=the real-time playout
duration is not equal to the media duration played).
This happens for the main playback path already, but not for
the mode in which the position is estimated from the playback
head position and also not in the phase after the track has
been stopped. Both cases are not very noticeable during
normal playback, but become relevant when playing in offload
mode.
PiperOrigin-RevId: 507736408
Based on [this conversation thread](https://chat.google.com/room/AAAA--f88ao/76Rem_cRCK8), I've opted to update the existing FrameProcessor.create() rather than deprecate it, as it is unlikely to be in use by apps outside google3.
PiperOrigin-RevId: 506920930
Before this CL, the `renderedLastFrame` flag is not set if the last frame is released immediately (force render), or when it's dropped.
PiperOrigin-RevId: 506358626
Flushing resets all the texture processors within the `FrameProcessor`. This
includes:
- At the back, the FinalMatrixTextureProcessorWrapper, and its MatrixTextureProcessor
- At the front, the ExternalTextureManager
- All the texture processors in between
- All the ChainingGlTextureProcessorListeners in between texture processors
- All the internal states in the aforementioned components
The flush process follows the order, from `GlEffectsFrameProcessor.flush()`
1. Flush the `FrameProcessingTaskExecutor`, so that after it returns, all tasks queued before calling `flush()` completes
2. Post to `FrameProcessingTaskExecutor`, to flush the `FinalMatrixTextureProcessorWrapper`
3. Flushing the `FinalMatrixTextureProcessorWrapper` will propagate flushing through, via the `ChainingGlTextureProcessorListener`
Startblock:
has LGTM from christosts
and then
add reviewer andrewlewis
PiperOrigin-RevId: 506296469
Can be used to combine multiple media items into a single timeline window.
Issue: androidx/media#247
Issue: google/ExoPlayer#4868
PiperOrigin-RevId: 506283307
AudioProcessor-based speed changes are not supported with
offload, so we should use the AudioTrack-based speed changes
by default if the user requests a speed change.
This moves the decision of which speed change path is used
into the Configuration, so that it can change for each
AudioTrack in a playlist.
PiperOrigin-RevId: 505621911
This makes it easier to reason about some parts of the code and
will eventually allow to easily switch between AudioProcessor-
based on AudioSink-based speed adjustment.
The current state saves the applicable playback parameters
in separate variables depending on which speed adjustment
path is used. Moreover, the AudioProcessor-based logic keeps
a chain of pending parameter changes and we derive the last
applicable one everytime we need the current parameters.
After this change, this is simplified by
- keeping a common value for playback parameters independent
of the actual path we use for adjustment.
- keeping the final ("current") parameters directly, instead
of deriving it from a chain of yet to be applied parameters.
PiperOrigin-RevId: 505097294
MergingMediaPeriod creates its track groups with ids concatenating position in its periods array and the underlying child track group id. The ids can be used in selectTracks for matching to periods list.
Issue: google/ExoPlayer#10930
PiperOrigin-RevId: 505074653
`FrameProcessorManager` now reports it's not ready when the output surface is set but not the output resolution. `FrameProcessorManager` allows playback without an output surface, like with ExoPlayer.
PiperOrigin-RevId: 504626088
Resampling as a term is overloaded, however it was raised as a
confusing term in a meeting recently, as the 1P team initially thought
this would change the sample rate. The naming of this `AudioProcessor`
now matches `ToInt16PcmAudioProcessor`.
PiperOrigin-RevId: 503441019
This is needed for constrained multi-asset to shift the timestamps of
the media items that are not the first in the sequence.
PiperOrigin-RevId: 502409923
Previously, after calling MCVR.setOutput() with null, `frameProcessorManager`'s output surface is cleared. What was unexpected is `ExoPlayerInternal` notifies a zero output resolution after clearing the output surface. This zero resolution causes FrameProcessor to fail.
PiperOrigin-RevId: 501861993
Starting with Android 13 (API 33) an app needs to request the
permission to post notifications or notifications are suppressed.
This change documents this in the class level JavaDoc of the
`DownloadService`.
Issue: google/ExoPlayer#10884
PiperOrigin-RevId: 501346908
When audio processors are enabled during tunneling, they must produce
output immediately, ensuring that the timestamps of the output samples
correspond to the input and that no additional samples are produced.
This requirement is documented in the Javadoc of DefaultAudioSink.
However, this alone doesn't guarantee all buffers are immediately
written to the AudioTrack, because the AudioTrack writes are
non-blocking and may need multiple attempts.
When draining the audio sink at the end of the stream, we currently
fail in this situation because we assert that the timestamp must be
set (=the drain operation is a no-op). But this may not be true when
the previous non-blocking write wasn't fully handled. We can fix this
by saving the last timestamp and reusing it during draining.
Issue: google/ExoPlayer#10847
PiperOrigin-RevId: 500943891
Initialising the fields as Integer and then getting a String on compute time is slow. Instead we directly initialise these fields as String. Improves the time taken in bundling PlayerInfo further to less than 200ms from ~300ms.
Also modified a test to improve productive coverage.
PiperOrigin-RevId: 500003935
FrameProcessor already support using different transfer function for input and
output color. This CL has two major changes:
- Create an eglSurface that recognizes BT.2020 PQ
- This requires a separate extension that works only after 33
- So we current throw, if input is HDR, and this extension doesn't work
- Create FrameProcessor with PQ output transfer function
PiperOrigin-RevId: 496023758
The tunneling callbacks are sent via Handler messages and may be
handled after the codec/surface was changed or released.
We already guard against the codec/surface change condition by
creating a new listener and verifying that the current callback
happens for the correct listener instance, but we don't guard
against a released codec yet.
PiperOrigin-RevId: 495882353
Some Player methods operate relative to existing indices in the
playlist (add,remove,move,seek). As these operations may be issued
from a place with a stale playlist (e.g. a controller that sends
a command while the playlist is changing), we have to handle out-
of-bounds indices gracefully. In most cases this is already
documented and implemented correctly. However, some cases are not
documented and the existing player implementations don't handle
these cases consistently (or in some cases not even correctly).
PiperOrigin-RevId: 495856295
The `MediaItem` instances in the following cases are not actually empty but acts as a placeholder. `EMPTY_MEDIA_ITEM` can also be confused with `MediaItem.EMPTY`.
PiperOrigin-RevId: 495843012
It covers the following cases:
| From/To | `null` | `surface 0` | `surface 1` |
|-------------|--------|-------------|-------------|
| `null` | 🆖 | 📺 | 📺 |
| `surface 0` | ❌ | 🔁 | 📺 |
| `surface 1` | ❌ | 📺 | 🔁 |
Where
- 🆖 means NOP
- ❌ means
- Set `null` on FrameProcessor, effectively dropping all frames
- 📺 means
- Notify the listener of video size
- Set FrameProcessor output surface and size when MSG_SET_VIDEO_OUTPUT_SIZE is received
- 🔁 means
- Notify the listener of video size
PiperOrigin-RevId: 495477620
BasePlayer simplifies implementations by handling all the various
seek methods and forwarding to a single method that can then be
implemented by subclasses. However, this loses the information about
the concrete entry point used for seeking, which is relevant when
the subclass wants to verify or filter by Player.Command. This
can be improved by adding the command as a new parameter. Since
we have to change the method anyway, we can also incorporate the
boolean flag about whether the current item is repeated to avoid
the separate method.
PiperOrigin-RevId: 494948094
- Use a single `VideoSize` instance instead of four primitive fields.
- Clarify that the reported size is the decoded size, that is the encoded video
size.
PiperOrigin-RevId: 494148190
Some Player methods like getting the Looper and adding listeners
were always allowed to be called from any thread, but this is
undocumented. This change makes the threading rules of these
methods more explicit.
Removing listeners was never meant to be called from another thread
and we also don't support it safely because final callbacks may
be triggered from the wrong thread. To find potential issues, we
can assert the correct thread when releasing listeners.
Finally, there is a potential race condition when calling addListener
from a different thread at the same time as release, which may lead to
a registered listener that could receive callbacks after the player is
released.
PiperOrigin-RevId: 493843981
An AndroidTest is needed to test the message sending from ExoPlayerImpl to
a video renderer (MCVR in this case). The test will be added later.
PiperOrigin-RevId: 493602259
These have the same value (`-1`), and basically the same meaning (offset
in an array/list/file/byte stream/etc), but 'position' is an overloaded
term in a media playback library, and there's a risk people assume that
methods like `Player.getCurrentPosition()` may return
`C.POSITION_UNSET`, when in fact unset media times (whether duration or
position) are always represented by `C.TIME_UNSET` which is a) a `long`
(not `int`) and b) a different underlying value. (aside:
`getCurrentPosition()` never returns an unset value, but it's a good
example of the ambiguity of the word 'position' between 'byte offset'
and 'media timestamp'.)
PiperOrigin-RevId: 492493102
This inconsistency was exposed by an upcoming change to deprecate
`POSITION_UNSET` in favour of `INDEX_UNSET` because position is an
ambiguous term between 'byte offset' and 'media position', as shown
here.
PiperOrigin-RevId: 492470241
Discovered while investigating Issue: google/ExoPlayer#10823
Example stack trace with the previous code (I added the index value for
debugging):
```
playerFailed [eventTime=44.07, mediaPos=44.01, window=0, period=0, errorCode=ERROR_CODE_FAILED_RUNTIME_CHECK
androidx.media3.exoplayer.ExoPlaybackException: Unexpected runtime error
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:635)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loopOnce(Looper.java:202)
at android.os.Looper.loop(Looper.java:291)
at android.os.HandlerThread.run(HandlerThread.java:67)
Caused by: java.lang.IllegalArgumentException: index=-1
at androidx.media3.common.util.Assertions.checkArgument(Assertions.java:55)
at androidx.media3.extractor.text.webvtt.WebvttSubtitle.getEventTime(WebvttSubtitle.java:62)
at androidx.media3.extractor.text.SubtitleOutputBuffer.getEventTime(SubtitleOutputBuffer.java:56)
at androidx.media3.exoplayer.text.TextRenderer.getCurrentEventTimeUs(TextRenderer.java:435)
at androidx.media3.exoplayer.text.TextRenderer.render(TextRenderer.java:268)
at androidx.media3.exoplayer.ExoPlayerImplInternal.doSomeWork(ExoPlayerImplInternal.java:1008)
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:509)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loopOnce(Looper.java:202)
at android.os.Looper.loop(Looper.java:291)
at android.os.HandlerThread.run(HandlerThread.java:67)
]
```
#minor-release
PiperOrigin-RevId: 492464180
Use the bitrate of the audio format (when available) in
DefaultAudioSink.AudioTrackBufferSizeProvider.getBufferSizeInBytes() to
calculate accurate buffer sizes for direct (passthrough) playbacks.
#minor-release
PiperOrigin-RevId: 491628530
To support OPUS offload, we need to provide a few configuration values
that are currently not set due to the lack of devices supporting
OPUS offload.
PiperOrigin-RevId: 491613716
Our FakeClock generally makes sure that playback tests are fully
deterministic. However, this fails if the test uses blocking waits
with clock.onThreadBlocked and where relevant Handlers are created
without using the clock.
To fix the flakiness, we can make the following adjustments:
- Use TestExoPlayerBuilder instead of legacy ExoPlayerTestRunner
to avoid onThreadBlocked calls. This also makes the tests more
readable.
- Use clock to create Handler for FakeVideoRenderer and
FakeAudioRenderer. Ideally, this should be passed through
RenderersFactory, but it's too disruptive given this is a
public API.
- Use clock for MediaSourceList and MediaPeriodQueue update
handler.
PiperOrigin-RevId: 490907495
When estimating the AudioTrack min buffer size, we must use a PCM
frame of 1 when doing direct playback (passthrough). The code was
passing -1 (C.LENGTH_UNSET).
PiperOrigin-RevId: 489238392
The method allows clients to specify a pre-existing thread
to use for playback. This can be used to run multiple ExoPlayer
instances on the same playback thread.
PiperOrigin-RevId: 488980749
Util.getAudioTrackChannelConfig() maps a channel count to a
channel mask that is passed to AudioTrack. The method expected that
playback of 8-channel audio is possible from Android 5.1 and playback of
12-channel audio is only possible from Android 12L. However, there is no
restriction on the upper number of channels that can be passed to the
AudioTrack. google/ExoPlayer#10701 is an example where the audio decoder
outputs 12 channels on an Android 10.
This change removes the restrictions for 8 and 12 channels. Note, we still
do not support playback of arbitrary number of channels as it would require
further changes to DefaultAudioSink.
#minor-release
Issue: google/ExoPlayer#10701
PiperOrigin-RevId: 488659831
We currently skip this calculation entirely, but it can be added by
calculating the window duration using the wrapped window's duration
and the provided AdPlaybackState.
Issue: google/ExoPlayer#10764
PiperOrigin-RevId: 488614767
Added new method to check if codec just functionally supports a format. Changed getDecoderInfosSortedByFormatSupport to use new function to order by functional support. This allows decoders that only support functionally and are more preferred by the MediaCodecSelector to keep their preferred position in the sorted list.
UnitTests included
-Two MediaCodecVideoRenderer tests that verify hw vs sw does not have an effect on sort of the decoder list, it is only based on functional support
Issue: google/ExoPlayer#10604
PiperOrigin-RevId: 487779284
It's not clear to me why presubmit didn't catch this, I briefly
investigated but couldn't work it out - so I'm just going to fix
it and move on.
#minor-release
PiperOrigin-RevId: 487497827
This makes two types of fix:
1. Align parameter names on overridden methods where the superclass
has `@param` javadoc.
2. Use `@hide` on `protected final` methods that refer to package-private
types. This will hide these symbols from Dackka javadoc generation
but not (currently) from the artefacts distributed on Maven. These
methods are currently unusable outside their package anyway (e.g. by
external developers) because of the dependency on a package-private
type.
This also changes some HLS, SmoothStreaming, and IMA code where I've renamed
parameters of overridden methods to be consistent across the type
hierarchy.
#minor-release
PiperOrigin-RevId: 487472665
This change makes adding ad events in live streams more robust by allowing ad
groups to grow in number of ads if more ad events are received than initially
announced by the SDK.
With the IMA prefetch feature, an AdPod can grow in size in certain conditions
like from initially 2 ads to 4 ads being part of the ad group. With this change,
if an additional ad event arrives while the ad group is still being played,
the ad group is expanded. If the event arrives late and the ad group is already
completed, a new group is created for the remaining ads.
This also covers the case where we join the live stream while an ad is being
played and we missed at least one LOADED event from the SDK. Ads of the group
before the first LOADED event are ignored in such a case.
PiperOrigin-RevId: 484214760
Split inner interface into separate file, which will go in common
module. The old interface will be deprecated and extends the new.
#cleanup
PiperOrigin-RevId: 483732226
Although it can be useful to check the output format, it's not required or needed.
For some AudioProcessor implementations, it is stated/obvious that
the output format will match the input, in which case there is no
a need to check the return value.
#cleanup
PiperOrigin-RevId: 483403679
Currently, repeating the same item (via seekNext/Previous) implicitly
results in a seek to the default position of the current item, which
looks exactly the same as a direct seek. As a result, we don't send
onMediaItemTransition as we would for every other seekNext/Previous
call.
This can be fixed by explicitly marking the repeat case in the internal
BasePlayer/ExoPlayerImpl methods, so that the callback can be triggered.
Issue: google/ExoPlayer#10667
PiperOrigin-RevId: 481951788
We already have logic to end all session except the current one if the
current one doesn't have a MediaPeriodId yet. This is assuming that this
only happens after a seek on the app side where the player doesn't have
detailled knowledge about the MediaPeriodIds yet.
Currently this logic isn't triggered if the window we are coming from
doesn't have its MediaPeriodId either as we run into another check that
keeps sessions around until we have a valid windowSequenceNumber.
Swapping both conditions fixes this case without breaking any of the
other known transition scenarios.
Issue: androidx/media#180
PiperOrigin-RevId: 480866465
We currently use the literal -1 (=NO_VALUE) when adding up the
total. Tracks without known bitrate can be ignored in the
calculation, but we should use an explicit value of 0.
#minor-release
Issue: google/ExoPlayer#10664
PiperOrigin-RevId: 480048126
If the sample type is Dolby Vision and the display does not support Dolby Vision, then the capabilities DecoderSupport flag is set to DECODER_SUPPORT_FALLBACK_MIMETYPE. This denotes that the renderer will use a decoder for a fallback mimetype if possible. This alters track selection as tracks with DecoderSupport DECODER_SUPPORT_PRIMARY are preferred.
UnitTests included
-DefaultTrackSelector test that checks track selection reordering with DECODER_SUPPORT_FALLBACK_MIMETYPE
-MediaCodecVideoRenderer test that checks setting of DecoderSupport flag based on Display's Dolby Vision support
Issue: google/ExoPlayer#8944
PiperOrigin-RevId: 480040876
* Add `setOutputStreamOffsetUs(long)` method in `AudioSink`.
* Add private methods `setOutputStreamOffsetUs(long)` method in `MediaCodecRenderer` and `DecoderAudioRenderer`.
* Add protected method `onOutputStreamOffsetUs(long)` method in `MediaCodecRenderer`, in which:
* `MediaCodecRenderer` itself will be no-op for this method.
* `MediaCodecAudioRenderer` will propagate this value to its `audioSink`.
* Add logics in `DecoderAudioRenderer` to calculate `outputStreamOffsetUs`.
PiperOrigin-RevId: 479265429
This allows to access the associated functionality of AudioTrack and
fills a feature gap to MediaPlayer, which has a similar method.
Issue: androidx/media#135
PiperOrigin-RevId: 476398964
If the sample type is dolby vision and the following conditions match
a)There is a supported alternative codec mimetype
b)Display does not support Dolby Vision
Then getDecoderInfos will return the alternative types.
Issue: google/ExoPlayer#9794
PiperOrigin-RevId: 476356223
The ClearKey CDM will attach an 'invalid' URL in `KeyRequest` objects,
when the documentation states this should be an empty string if a
default URL is not known.
#minor-release
PiperOrigin-RevId: 476113513
If the back buffer is using too much memory, there is a risk
playback could get stuck because LoadControl refuses to load
further data. This eventually results in a stuck-buffering
playback error.
We can detect this case, clear the back buffer and then ask
the LoadControl again to avoid failing playback in such a case.
PiperOrigin-RevId: 472679797
The stream offset is used to calculate the presentation time of
a metadata object when reading and later when playing, to calculate
the current presentation time to decide whether to send the metadata
to the output.
Accordingly, the presentation time of a pending metadata that has been
calculated with a given offset needs to be recalculated when the
stream offset changes.
#minor-release
PiperOrigin-RevId: 472499943
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (3 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 472254253
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (19 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 471022923
We create an empty CueGroup in many places as default or
where none is needed. Instead, we can define a constant
for this purpose and reuse it.
PiperOrigin-RevId: 467944841
Increase the estimated max sample size for HEVC by 2x, and set a minimum
size of 2MB. The 2MB will be applied for resolutions up to 1080p, after
which the new calculation takes effect. This is in par with the
platform's HEVC software decoder.
PiperOrigin-RevId: 467641494
Adds a new event to AudioOffloadListener to get the offload state of the track, which indicates when software decoding is taking place.
PiperOrigin-RevId: 465264362
Avoids disabling Offload on a write error, and instead relies on this being disabled on the AudioTrack init. It will no longer recover by disabling offload.
PiperOrigin-RevId: 465248917
* Sets KEY_HDR_STATIC_INFO from MediaFormat in the DefaultCodec.
* Adds checks in mediaparser to ensure color space, range, and transfer are valid
values.
PiperOrigin-RevId: 463921325
Despite unregistering the callback and clearing pending Handler
messages, the callback may still receive pending calls if they
are already triggered by the AudioTrack. Instead of asserting
that the track is correct, we should gracefully ignore stale
events.
PiperOrigin-RevId: 463851393
This will help developers self-diagnose issues like Issue: google/ExoPlayer#10392
where the NPE occurs far from the original null value because a field
gets assigned to null.
This change aims to ensure that every stable method on Player,
ExoPlayer and ExoPlayer.Builder that takes a non-null type will fail
with an NPE before returning.
#minor-release
PiperOrigin-RevId: 461846580
The call doesn't currently reset the already loaded suppliers and
factories. Also fix the supplier loading code to use a local copy
of the current dataSourceFactory to avoid leaking an updated
instance to a later invocation.
Issue: androidx/media#116
#minor-release
PiperOrigin-RevId: 460721541
We currently start a simple Thread to release AudioTracks
asynchronously. If many AudioTracks are released at the same
time, this may lead to OOM situations because we attempt to
create multiple new threads.
This can be improved by using a shared SingleThreadExecutor.
In the simple case of one simmultaneous release, it's exactly
the same behavior as before: create a thread and release it
as soon as it's done. For multiple simultanous releases we
get the advantage of sharing a single thread to avoid creating
more than one at the same time.
Issue: google/ExoPlayer#10057
PiperOrigin-RevId: 460698942
Some calls to handleBuffer return false while a previous
flush is still handled in the background.
Fix this by either asserting the method returns true if
we don't expect any delay, or calling it repeatedly until
it returns true (within a timeout).
PiperOrigin-RevId: 460474419
