The placeholder surface is either EGL_NO_SURFACE or a 1x1 pbuffer
depending on whether the device supports EGL_KHR_surfaceless_context.
PiperOrigin-RevId: 438541846
Since the output textures and surfaces are managed by the
FrameProcessorChain, clearing them there makes sense.
This is also less error-prone as it might not be obvious to
someone implementing a GlFrameProcessor that they need to
glClear. (Clearing twice won't cause any problems.)
PiperOrigin-RevId: 438532247
This is basically 'container' and 'subtitle' MIME types
I previously avoided stabilising any 'custom' MIME types (those
containing '/x-') but it certainly seems reasonable to expect
developers to use APPLICATION_M3U8 and so then it also makes sense
to stabilise other 'similar' custom MIME types too.
PiperOrigin-RevId: 438501642
This change adds the ability to update the error code of the PlaybackStateCompat in
cases we need this for backwards compatibility. It is applied in the least
intrusive way because normally, return values of a service method should not change
the state of the `PlaybackStateCompat`, just because it has nothing to do with the
playback state but rather with the state of the `MediaLibrarySession`.
For this reason only the error code `RESULT_ERROR_SESSION_AUTHENTICATION_EXPIRED`
is taken into account while all other error codes are not mapped to the
`PlaybackStateCompat'.
PiperOrigin-RevId: 438038852
This requires an additional nanos to micros conversion because
the SurfaceTexture uses nanos. But as the timestamps from the
MediaCodec decoder (propagated in DefaultCodec#releaseOutputBuffer) are
in microseconds no precision is lost here.
Also add test that checks output video duration.
PiperOrigin-RevId: 438010490
MAXIMUM_AVERAGE_PIXEL_ABSOLUTE_DIFFERENCE was copied from a test
class, but BitmapTestUtil isn't a test. So the javadoc needs
rewording to reflect that.
PiperOrigin-RevId: 438001833
The problem is not the IntDef array, it's the fact the lint tool
is unable to correctly infer the annotations on the lambda parameters
without them being explicitly annotated. It seems explicitly annotating
is better than suppressing all IntDef warnings in the whole method.
PiperOrigin-RevId: 437969271
From Android T onwards `MediaCodec` supports requesting tone-mapping down to
SDR. Add an option to request this behavior and document that it isn't
supported before T. Also add an option in the demo app to try it out.
Tested manually on a prerelease build.
PiperOrigin-RevId: 437765325
The thread name is used to verify the thread in both createOpenGlObjectsAndInitializeFrameProcessors() and processFrame().
Also remove glThread field that was only used for this verification.
PiperOrigin-RevId: 437730804
Since the output size can be overridden, the viewport should be
ouputWidth/Height and NOT the ExternalCopyFrameProcessor's output size
which matches the input size.
PiperOrigin-RevId: 437256635
* The AdvancedFrameProcessor calls use() in updateProgramAndDraw().
* The AdvancedFrameProcessor has the same input and output dimensions.
PiperOrigin-RevId: 437231350
On some devices, decoding gets stuck when the number of frames pending at the
`SurfaceTexture` is too high. We added a workaround that only allows one frame
to be pending at a time. That fixed the issue, however, based on on-device
testing it seems that it's safe to queue more than one frame.
Add a method that returns a safe estimate of the number of frames that can be
pending at a time, and use this to limit the number of frames that can be
released from the decoder but not processed by the frame processor chain.
PiperOrigin-RevId: 437057075
Configuring the frame sizes between frame processors is now the
FrameProcessorChain's rather than the caller's responsibility.
The caller can getOutputSize() and override it for encoder fallback
in configure().
PiperOrigin-RevId: 437048436
The factory method is replaced by a public constructor and
configure() method which configures the input/output surfaces
and handles the OpenGL setup.
This is a prerequisite for removing the responsibility of the
caller to configureSizes() before creating the chain in a follow-up.
PiperOrigin-RevId: 437028882
This allows us to bypass many device-specific issues, that only occur when
decoding directly to an encoder surface, without OpenGL. This also allows us
to maintain fewer code branches, which require additional testing to verify
correctness.
PiperOrigin-RevId: 437003138
Allow apps to modify how frames are presented, via modifying resolution.
A follow-up CL will provide aspect ratio, cropping, etc.
PiperOrigin-RevId: 436963312
* These grouping parentheses are unnecessary; it is unlikely the code will be misinterpreted without them
(see http://go/bugpattern/UnnecessaryParentheses) (11 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 436726763
SEF is similar to frame editing, where the input and output videos are
not intended to match, so SSIM will not provide a reliable value. To
check SSIM correctly in future, we would need to provide
golden/expected video files to compare output against.
PiperOrigin-RevId: 436707240
The FrameProcessorChain manages a List<GlFrameProcessor>.
FrameProcessorChainDataProcessingTest now tests chaining ScaleToFit-
and AdvancedFrameProcessors.
PiperOrigin-RevId: 436468037
This currently causes the test to fail on Pixel 6 Pro running a recent S build
SQ1D.220205.004.
There is no need to test audio transcoding while we are measuring video
quality.
PiperOrigin-RevId: 435635314
With this change, the MediaNotificationManager stops MediaSessionService
and hides any notifications if the player has no media items or the
player hasn't been prepared yet.
PiperOrigin-RevId: 435349363
ExternalCopyFrameProcessor's output dimensions match the input
size not the output size. So the intermediate texture size
should match the input size.
Also rename configureOutputDimensions to configureOutputSize.
PiperOrigin-RevId: 435058789
More info: go/lsc-assertthrows and go/assertthrows
NOTE: if the source of truth for this code is _NOT_ `//third_party/`, please ask for this CL to be reverted.
Tested:
TAP --sample ran all affected tests and none failed
http://test/OCL:434925976:BASE:434869111:1647399186064:de338189
PiperOrigin-RevId: 435047509
Some infra thinks the if does not protect against API incompatibilities
(example: Android's soong build system). AndroidStudio 2021.3.1 also
signals a warning.
#minor-release
PiperOrigin-RevId: 435027073
Use android.util.Size, whose naming is much easier to understand than Pair<Integer, Integer>, in both FrameProcessor and EncoderUtil.
PiperOrigin-RevId: 434813986
* Move auto-adjustments for transformation matrices from the
VideoTranscodingSamplePipeline constructor to the new
ScaleToFitFrameProcessor.
* Add GlFrameProcessor#getOutputDimensions() to allow for GlFrameProcessors with
different input and output dimensions. This is a prerequisite for
Presentation.
* Tested with unit tests (and manually just in case).
* A follow up CL will implement change the FrameProcessor input to be scale and
rotate values as requested by the user. This was kept out of this CL to
reduce CL review size. Presentation will also be implemented in a follow up
CL.
PiperOrigin-RevId: 434774854
As pointed out in a previous review, createFallbackTransformationRequest
can be a bit confusing to parse.
Added javadocs and renamed parameters appropriately, to make it slightly
more easy to understand.
PiperOrigin-RevId: 434733313
Added PCM RTP packet reader and added support for PCM 8 bit,
16 bit, ALAW and MULAW playback through RTSP.
Change-Id: If0a187b55faa89850a159e17eae28358d6634799
*** Original commit ***
Rollback of aa22bc2dbe
*** Original commit ***
Fix PlayerView touch handling
Overriding onTouchEvent was causing multiple issues, and
appears to be unnecessary. Removing the override fixes:
1. StyledPlayerView accessibility issue where "hide player
controls" actually toggled play/pause.
2. Delivery of events to a registered OnClick...
***
PiperOrigin-RevId: 434502423
*** Original commit ***
Don't call MediaDrm.setLogSessionId in FrameworkMediaDrm
This method throws an UnsupportedOperationException on some Android 12
devices.
***
PiperOrigin-RevId: 433708582
The variable marks the coordinates used to sample from a texture, so hopefully
this makes the naming a bit more descriptive.
This renames vTexCoords and aTexCoords. No functional changes intended.
PiperOrigin-RevId: 433499934
This fixes an exception thrown when parceling becasue the type can not be found
(expects the AdsPlaybackState to be Serializable). Transforming the map and the
ad playback states to a Bundle fixes the problem.
#minor-release
PiperOrigin-RevId: 433491993
When the start position of a MediaPeriodInfo is equal or higher than the duration,
we set the start position to `duration - 1` to end on the last frame. With server
side inserted ad streams, this has the effect that we actually need to seek back to
the last content frame after a post-roll.
This is desirable when actually ending on that frame but produces a BUFFERING event
when transitioning from an SSAI stream with a post-roll to the next media item in
the playlist. This change sets the start position to the duration when we are
clipping the last content period of an SSAI stream that is played in a playlist.
PiperOrigin-RevId: 433445680
If an OpenGL call blocks because the encoder's input surface is full,
this will now block the background thread while the main thread can
continue querying encoder output and free up encoder capacity until
it accepts more input unblocking the background thread.
PiperOrigin-RevId: 433283287
*** Original commit ***
Fix PlayerView touch handling
Overriding onTouchEvent was causing multiple issues, and
appears to be unnecessary. Removing the override fixes:
1. StyledPlayerView accessibility issue where "hide player
controls" actually toggled play/pause.
2. Delivery of events to a registered OnClickListener when
useController is false.
3. Delivery of events to a registered OnLongClickListener
in all configurations.
4. Incorrectly treating a sequence of touch events that
exit the bounds of the vi...
***
PiperOrigin-RevId: 433262414
This change makes all notification actions start MediaSessionService
in the background except COMMAND_PLAY which starts the service
in the foreground. This is to avoid ANRs that are raised if we don't
call MediaSessionService.startForeground() within 5 seconds since the
service was started in the foreground.
We only call MediaSessionService.startForeground() when
Player.getPlayWhenReady() returns true, and only COMMAND_PLAY sets
playWhenReady to true.
Issue: androidx/media#20
#minor-release
PiperOrigin-RevId: 433229604
With the new version, we try the following before fixing resolution:
- Fix size alignment
- Try 3/4 the width and height
- Try 2/3 the width and height
- Try 1/2 the width and height
Also: align the resolution ends in 1 or 9 to 0.
PiperOrigin-RevId: 433206358
Overriding onTouchEvent was causing multiple issues, and
appears to be unnecessary. Removing the override fixes:
1. StyledPlayerView accessibility issue where "hide player
controls" actually toggled play/pause.
2. Delivery of events to a registered OnClickListener when
useController is false.
3. Delivery of events to a registered OnLongClickListener
in all configurations.
4. Incorrectly treating a sequence of touch events that
exit the bounds of the view before ACTION_UP as a click,
both for delivery to OnClickListener and for toggling
the controls.
Note: After this change, control visibility will not be
toggled if the application developer explicitly sets the
view to be non-clickable. I think that's probably working
as intended though. It seems correct that a non-clickable
view would not respond to clicks.
Issue: google/ExoPlayer#8627
Issue: google/ExoPlayer#9605
Issue: google/ExoPlayer#9861
PiperOrigin-RevId: 433016626
This change rewrites the UI module's track selection
components to depend on the Player API, allowing us to
finally remove the UI module's dependency on ExoPlayer
as a concrete player implementation.
PiperOrigin-RevId: 432989318
Previously, we've used getSupportedHeights/Widths() to find the supported
resolution. However, the height/width can be over-reported when using these
APIs. For example, getSupportedWidths and getSupportedHeights can both return
3840, but the supported height when using 3840 as width is only 2160.
PiperOrigin-RevId: 432926192
This makes the reading period advance early as expected at the end of an ad
period. Before this change the reading position of the metadata renderer
prevented advancing the period until metadata arrived after the start position of
the following period. Only then the reading position of the metadata renderer
is updated and beyond the start position of the following period which is a
condition to advance the reading period.
Because transitioning to the next period is a virtual transition and the
SharedMediaPeriod keeps reading from the same underlying sample streams, the
metadata renderer can safely be ignored for this check.
#minor-release
PiperOrigin-RevId: 432646037
(cherry picked from commit c7c7517322)
This change fixes two bugs where MediaSessionServe shows a notification
with the Play icon but tapping it will not start playback:
1. After playback ends: we need to seek to the beginning of the media
item.
2. After adding media items to the player but not starting playback:
We need to call Player.prepare() too.
PiperOrigin-RevId: 432469953
(cherry picked from commit 1023b9d55e)
These should have been removed as part of 1391b7c65d, since we no
longer officially support overriding the layout file for this class.
This class is known as StyledPlayerView in exoplayer2.
#minor-release
PiperOrigin-RevId: 432411322
(cherry picked from commit a353b3332a)
The MockPlayer has a single CountDownLatch field and multiple boolean
flags that track if a player method was called. Upon calling the methods
the latch count. Tests set the latch count to match exactly with the
number of expected player interactions then block the test thread until
the latch reaches zero and assert the respective method flags are true.
This is subject to false positives. If the underneath implementation
changes and call more player method, then the test thread will unblock
as soon as a certain number of interactions is performed, which may be
less than what the test expected originally. However, the test may stil
pass if the player thread had enough time to update the expected method
flag.
This change removes the single CountDownLatch and the boolean flags and
instead it adds APIs to query the MockPlayer if a method has been called
and await until a method is called. Internally, the MockPlayer has a
ConditionVariable per method.
PiperOrigin-RevId: 432399077
(cherry picked from commit 45d512160c)
This method is no longer needed since we added SubtitleConfiguration#id
in 59d98b9a4e.
Issue: google/ExoPlayer#10016
#minor-release
PiperOrigin-RevId: 432169262
(cherry picked from commit 232f2d815d)
This is consistent with the new MediaSessionStub that accepts page index 0
and the JavaDoc of legacy and new service callbacks.
Issue: androidx/media#32
PiperOrigin-RevId: 431390454
(cherry picked from commit 9821dd282c)
When a live stream is joined while ads are already playing, the LOADED event is
missed and we don't have ad information for those ads in the ad group that are
before the ad index at which we joined. This way we can clip the duration when we
receive the LOADED event for the last ad in the group. This fixes the problem of
the playback controls being hidden when content resumes after the ad group.
#minor-release
PiperOrigin-RevId: 431269627
(cherry picked from commit 8e8c59031c)
This makes the reading period advance early as expected at the end of an ad
period. Before this change the reading position of the metadata renderer
prevented advancing the period until metadata arrived after the start position of
the following period. Only then the reading position of the metadata renderer
is updated and beyond the start position of the following period which is a
condition to advance the reading period.
Because transitioning to the next period is a virtual transition and the
SharedMediaPeriod keeps reading from the same underlying sample streams, the
metadata renderer can safely be ignored for this check.
#minor-release
PiperOrigin-RevId: 432646037
We will be migrating our track selection UI components to be
based on TracksInfo. We need DownloadHelper to expose TracksInfo
to make it compatible with such components.
PiperOrigin-RevId: 432474487
This change fixes two bugs where MediaSessionServe shows a notification
with the Play icon but tapping it will not start playback:
1. After playback ends: we need to seek to the beginning of the media
item.
2. After adding media items to the player but not starting playback:
We need to call Player.prepare() too.
PiperOrigin-RevId: 432469953
addTrackSelectionForSingleRenderer takes a list of legacy overrides,
which are then set on the supplied parameters one at a time to run
track selection. This allows multiple overrides for a single track
type to be applied in the download use case, despite it not being
possible to place such overrides directly into a single parameters.
For new style overrides, multiple overrides for the same track type
can be placed directly into a single parameters. Therefore we'll be
able to replace use of addTrackSelectionForSingleRenderer with use
of addTrackSelection, which is a much cleaner API. For this to work,
we need to make DownloadHelper apply multiple overrides in this case.
PiperOrigin-RevId: 432459834
This will allow for easier customisation of the additional tasks
performed by the test runner, such as calculating metrics like SSIM.
PiperOrigin-RevId: 432434850
These should have been removed as part of 1391b7c65d, since we no
longer officially support overriding the layout file for this class.
This class is known as StyledPlayerView in exoplayer2.
#minor-release
PiperOrigin-RevId: 432411322
The MockPlayer has a single CountDownLatch field and multiple boolean
flags that track if a player method was called. Upon calling the methods
the latch count. Tests set the latch count to match exactly with the
number of expected player interactions then block the test thread until
the latch reaches zero and assert the respective method flags are true.
This is subject to false positives. If the underneath implementation
changes and call more player method, then the test thread will unblock
as soon as a certain number of interactions is performed, which may be
less than what the test expected originally. However, the test may stil
pass if the player thread had enough time to update the expected method
flag.
This change removes the single CountDownLatch and the boolean flags and
instead it adds APIs to query the MockPlayer if a method has been called
and await until a method is called. Internally, the MockPlayer has a
ConditionVariable per method.
PiperOrigin-RevId: 432399077
This method is no longer needed since we added SubtitleConfiguration#id
in 59d98b9a4e.
Issue: google/ExoPlayer#10016
#minor-release
PiperOrigin-RevId: 432169262
DownloadHelper is in the ExoPlayer module, so there's no reason
why it can't use ExoPlayer specific track selections. That said,
we want our UI components to operate on generic
TrackSelectionParameters, and we want such UI components to be
useful for selecting tracks for download. To keep this interop,
it's necessary to have DownloadHelper accept generic
TrackSelectionParameters, or to require application code to
convert them. The first approach seems preferable!
PiperOrigin-RevId: 432158846
This constructor always does the wrong thing for non-adaptive groups
containing more than 1 track, because it'll incorrectly generate an
adaptive selection. Replace it with a constructor for specifying a
single track within the group instead.
PiperOrigin-RevId: 431673458
Only log GL exceptions in GlUtil if they aren't thrown. Otherwise,
it's up to the caller whether or not to log them to avoid logging them
twice.
PiperOrigin-RevId: 431657397
This test tests the same cases as the FrameEditorDataProcessingTest
as currently the main FrameEditor functionality is to apply a
transformation matrix using a TransformationFrameProcessor.
PiperOrigin-RevId: 431642066
As evidenced by the somewhat awkward logic in PlayerControlView, the
previous design wasn't very friendly to expected usage. There will be
more usage when the track selection dialog components are migrated,
which would be similarly awkward without this change.
PiperOrigin-RevId: 431407675
