In some streaming scenarios, like offload, the sink may finish writing buffers a bit before playback reaches the end of the track. In this case a player may pause while in this 'stopping' state.
The AudioTrackPositionTracker needs to update the cached values it uses to calculate position in the `PLAYSTATE_STOPPED`/`PLAYSTATE_STOPPING` states if pause/play are called during this period.
PiperOrigin-RevId: 571345914
(cherry picked from commit a789db5b41)
In offload mode, `AudioTrack#stop()` will put the track in `PLAYSTATE_STOPPING` rather than `PLAYSTATE_STOPPED`. The difference in state means that `AudioTrack` can be paused and played during this 'stopping' period.
Currently, if `AudioTrackPositionTracker#handleEndOfStream()` has been called then `DefaultAudioSink` in `pause()` won't call `AudioTrack#pause()`. `AudioTrack#pause()` should be called in this case if in offload mode.
#minor-release
PiperOrigin-RevId: 571335108
(cherry picked from commit ab42d64d6d)
The flag is no longer used by our components and only set and checked
in a few places to guarantee compatiblity with existing renderers and
decoders that still use it.
The flag will be removed in the future due to its design limitations.
#minor-release
PiperOrigin-RevId: 571291168
(cherry picked from commit 89d01981bc)
The aim of this test is to make sure the image is onscreen for the right amount of time, so to drive down flakes from the decoder taking too long, change this to an atLeast check
#minor-release
PiperOrigin-RevId: 570988044
(cherry picked from commit 9cc75ca52e)
Set KeepAliveMonitor to send a keep-alive message at half the timeout value, if provided, by the RTSP Setup response.
Issue: androidx/media#662
PiperOrigin-RevId: 570946237
(cherry picked from commit 42c1846984)
In most cases this is more useful than `durationUs`.
We will keep `durationUs`, and the constructor will continue to take
`startTimeUs` and `durationUs`, to allow for use-cases where we don't
know the start time but still want to indicate a duration (this will be
used to implement CEA-608 timeout).
#minor-release
PiperOrigin-RevId: 570944449
(cherry picked from commit bf7b91e57e)
This gets rid of the reliance on the decode only flag that is still
set on input buffers to the decoder if they are less than the start
time.
We still need to set and check the decode-only flag in SimpleDecoder
to ensure compatbility with custom decoders that use the flag while
it's not fully removed.
PiperOrigin-RevId: 570736692
(cherry picked from commit a03e20fe6c)
This is useful for analytics and understanding player behavior
during transitions.
#minor-release
PiperOrigin-RevId: 570623227
(cherry picked from commit 8e2bf21011)
The interface requires the implementation to return null if the
decode-only flag is set. So instead of setting the flag and returning
null, we can simply not call the method and assume it's null.
The only reason where this wouldn't work is if the metadata format
has keyframe-like logic and requires previous metadata to decode
the next one. This is not something we came across before and it seems
ignorable. If that feature is needed in the future, we should instead
add a method to MetadataDecoder to set the first output timestamp.
#minor-release
PiperOrigin-RevId: 570399838
(cherry picked from commit 796781d4c3)
While sleeping for offload, position is estimated based on time playing. If asleep and AudioTrack is reused, then the position will keep incrementing as the subsequent item plays. That is until wakeup when playing position is updated to the timestamp of the second item. Offload scheduling should be disabled until track transitions fully.
PiperOrigin-RevId: 570397140
(cherry picked from commit da06bf057a)
The test is hidden behind the Ignore annotation due to some flakiness just like `webvttInMp4`. However, it will be removed when the subtitle parsing is moved to a pre-sample-queue architecture.
#minor-release
PiperOrigin-RevId: 570376275
(cherry picked from commit bd5a3920b8)
In some cases, SimpleDecoder output needs to be skipped for rendering
because the decoder produces no data. This is one of the remaining
usages of BUFFER_FLAG_DECODE_ONLY at the moment and can be more
directly solved without using the flag. SimpleDecoder still needs to
check the flag though for backwards compatbility with custom decoders
while the flag is not completely removed.
PiperOrigin-RevId: 570345233
(cherry picked from commit c8aac24ffd)
When seeking, we must first flush the video sink so it stops
using any SurfaceTextures before flushing MediaCodec.
#minor-release
PiperOrigin-RevId: 570015998
(cherry picked from commit 144bd72236)
Move remote 8K file to local and trim to 320ms.
Trim done with ffmpeg:
`ffmpeg -i {remote_file} -t 0.3 -c:v copy -c:a copy 8k24fps_300ms.mp4`
PiperOrigin-RevId: 569449962
It seems likely we will define a new "image decoder" interface that
returns `ListenableFuture<Bitmap>`, and naming that will be
hard/annoying if we need to keep this interface working too.
It's also not really clear what a non-test implementation of this
interface would be expected to do, since `DefaultImageDecoder` is
documented to always decode using `BitmapFactory`.
#minor-release
PiperOrigin-RevId: 569206325
The library already maintains the subscribed controllers internally. This
change adds `MediaLibrarySession.getSubscribedControllers(mediaId)` to
access subscribed controllers for a given media ID.
To accept a subscription, `MediaLibraryService.Callback.onSubscribe` is
required to return `RESULT_SUCCESS`. So far, this isn't the case for the
default implementation of the library.
This change implements `Callback.onSubscribe` to conditionally
provide `RESULT_SUCCESS`. The default calls `Callback.onGetItem(mediaId)` to
assess the availability of the media item. If the app retruns `RESULT_SUCCESS`
with a browsable item, the subscription is accepted. If receiving a valid item
fails, the subscription is rejected.
Issue: androidx/media#561
PiperOrigin-RevId: 568925079
Changes
---
- Added `removeOfflineLicense(byte[])` and `getOfflineLicenseKeySetIds` and consumed them in their implementations
Background
---
- These APIs will help in addressing an increasing amount of `java.lang.IllegalArgumentException: Failed to restore keys: BAD_VALUE` which is our top playback error in our app
- Based on our discussion with Widevine team and [this exoplayer issue](https://github.com/google/ExoPlayer/issues/11202#issuecomment-1708792594)
- TL;DR: The failure occurs on startup if the user has 200+ offline licenses, we would like to add the functionality to remove offline licenses
**Note: Why we want these APIs in ExoMediaDrm and not in OfflineLicenseHelper**
- As per the issue above, we would like to access these 2 public APIs in MediaDrm that don’t exist in `OfflineLicenseHelper` or `ExoMediaDrm`
- APIs interested in:
- [MediaDrm#removeOfflineLicense()](https://developer.android.com/reference/android/media/MediaDrm#removeOfflineLicense(byte%5B%5D)): To remove offline license
- [MediaDrm#getOfflineLicenseKeySetIds()](https://developer.android.com/reference/android/media/MediaDrm#getOfflineLicenseKeySetIds()): To see number of offline licenses on startup
- We use `OfflineLicenseHelper` to download license for L1 and we don't interact with `ExoMediaDrm` directly. But for the alternate Widevine integration, we directly depend on `ExoMediaDrm` APIs to override and call CDM Native APIs.
- We would like to have the functionality of removing offline licenses for both integration which would need access to above APIs in `ExoMediaDrm`.
Links
---
- https://github.com/androidx/media/issues/659
MediaCodecRenderer has already been updated to not rely on the
input stream to mark its samples as decode-only and instead use
a simple time-based comparison to achieve the same effect.
This change makes the same update for all other renderers that
either use the flag directly or forward to a "decoder" instance.
PiperOrigin-RevId: 568232212
Before this change, media button events are routed from `onStartCommand`
of the `MediaSessionService` to the `MediaSessionCompat`, resolved by
the legacy library to a session command called on
`MediaSessionCompat.Callback` from where the command is delegated back
to the Media3 session.
With this change the keycode is resolved directly to a Media3 command
that is sent to the session through the media notification controller
of the session.
After this change, a playback or custom command sent to the session
from a notification, either as a pending intent (before API 33) or as
a legacy session command, look the same and the caller is the
media notification controller on all API levels.
PiperOrigin-RevId: 568224123
With this change, the `ControllerInfo` passed to
`MediaSessionService.onGetSession(ControllerInfo)`
is the same instance that is passed later to all
callback methods of `MediaSession.Callback`.
PiperOrigin-RevId: 568216855
ExoPlayer will not fail playback if an RTSP server responds to the Options request with an unknown RTSP method request type. ExoPlayer will parse the response and just not call methods it does not know how to use.
Issue: androidx/media#613
PiperOrigin-RevId: 568152076
With this change, the notification controller that is connected by
`MediaNotificationManager`, is used as a proxy controller of the
System UI controller. An app can use the proxy at connection time
and during the lifetime of the session for configuration of the
platform session and the media notification on all API levels.
This includes using custom layout and available player and session
commands of the proxy to maintain the platform session (actions,
custom actions, session extras) and the `MediaNotification.Provider`.
The legacy System UI controller is hidden from the public API,
instead the app interacts with the Media3 proxy:
- System UI is hidden from `MediaSession.getConnectedControllers()`.
- Calls from System UI to methods of `MediaSession.Callback`/
`MediaLibrarySession.Callback` are mapped to the `ControllerInfo`
of the proxy controller.
- When `getControllerForCurrentRequest()` is called during an operation of
System UI the proxy `ControllerInfo` is returned.
PiperOrigin-RevId: 567606117
The per-stream methods are generally preferred and having a reference
to them from the device-wide methods may help with discoverability.
Issue: google/ExoPlayer#11295
PiperOrigin-RevId: 567604785
Adjust the Javadoc to highlight that data of this MIME type just contains a URI, not the actual image content.
And also remove the superfluous "key" part of the MIME type string that doesn't
really add information (and it's also really just an URI, not an URI key).
PiperOrigin-RevId: 567560238
The current code only set the videoEffects when CVSP is initialized, which
happens after `player.prepare()`. But it's valid that videoEffects are set
before calling `prepare()`.
PiperOrigin-RevId: 566941216
Move audio offload mode related interfaces and definitions from `TrackSelectionParameters` to a new `AudioOffloadModePreferences` class.
PiperOrigin-RevId: 566905017
This method isn't used by the library (since <unknown commit>).
It doesn't really work well (e.g. arbitrarily defaults to `MUSIC` when
`UNKNOWN` would be a better default). There's no suggested replacement.
PiperOrigin-RevId: 566676744
This change uses the new incremental overloads of `SubtitleParser` to
avoid introducing the performance regression caused by the original
change requiring all cues to be fully parsed before the first could be
shown on screen.
`TtmlDecoder` which used to be `SimpleSubtitleDecoder` will now be
called `TtmlParser` and implement `SubtitleParser` interface. For
backwards compatibility, we will have the same functionality provided
by `DelegatingSubtitleDecoder` backed-up by a new `TtmlParser`
instance.
PiperOrigin-RevId: 566671398
I spotted that this looked wrong while investigating test various
session test failures. However, changing this logic doesn't seem to
affect the tests so I don't know if the change is an improvement or not.
PiperOrigin-RevId: 566655318
This requires adapting the 'to `CuesWithTiming` list' logic to work with
the new partial-output API, and that needs a private method so it's no
longer a good fit for a default method on `Subtitle` - hence moving it
to a new utility class.
Also update the implementation to never return `UNSET` duration (this is
an equivalent change to the `SsaParser` change in 9631923440).
PiperOrigin-RevId: 566598094
If getProgress is blocking whilst the internal thread calls endInternal
(for error or success), the condition is never opened. Related to this,
onCompleted and onError are therefore never surfaced to the app.
progressState is accessed from application and internal threads, so
should be marked volatile to prevent a thread caching the value.
PiperOrigin-RevId: 565720184
When running on emulators, ExternalTextureManager needs a longer timeout for
forcing EOS, but we didn't catch a device name running on blaze: `generic_x86`
PiperOrigin-RevId: 565513152
Organize logic a bit by splitting logic about how we draw using OpenGL onto a
texture, out from the larger class, which has lots of logic discussing how we select
frames and streams.
No functional change intended, but a few method calls are shuffled around to
simplify things.
PiperOrigin-RevId: 565426225
When we switch from MUXER_MODE_MUX_PARTIAL_VIDEO to MUXER_MODE_APPEND_VIDEO
`muxedPartialVideo` will already be `true` so `endTrack` method will pass
through this `if(muxedPartialVideo)` check which is incorrect.
PiperOrigin-RevId: 565398117
These tests were under androidTest because we needed a functional
BitmapFactory. Robolectric now supports decoding bitmaps so moving them
under tests.
PiperOrigin-RevId: 565181239
The logic that handles components' boundaries are grouped together in private
methods, like handling VideoCompositor's output textures.
PiperOrigin-RevId: 565131579
This change introduces two new types of method to `SubtitleParser`:
1. `parse()` methods that take a `Consumer<CuesWithTiming>` and return `void`
2. `parseToLegacySubtitle` method that returns `Subtitle`
(1) ensures that in the new 'parse before SampleQueue' world we can
write cues to the `SampleQueue` as soon as they're ready - this is
especially important when parsing monolithic text files, e.g. for a
whole movie.
(2) ensures that during the transition, the legacy 'parse after
SampleQueue' behaviour doesn't see any regressions in 'time to first
cue being shown'. Previously we had a single implementation to convert
from `List<CuesWithTiming>` to `Subtitle`, but this relies on the
complete list of cues being available, which can take a long time for
large files in some formats (with ExoPlayer's current parsing logic).
By allowing implementations to customise the way they create a
`Subtitle`, we can directly re-use the existing logic, so that the
'time to first cue being shown' should stay the same.
This change migrates all **usages** to the new methods, but doesn't
migrate any **implementations**. I will migrate the implementations in
follow-up CLs before deleting the old list-returning `parse()` methods.
PiperOrigin-RevId: 565057945
As discussed offline, this is important for users of the class, and not all users may choose to read method javadoc, so best to make sure it's visible by leaving it at the class-level.
PiperOrigin-RevId: 565057677
Removed `ExoPlayer.experimentalSetOffloadSchedulingEnabled` as scheduling will be enabled by default when offload is enabled for audio-only playback.
In addition, the `experimental` key word was taken out of the following
method signatures:
* `ExoPlayer.experimentalIsSleepingForOffload`
* `AudioOffloadListener.onExperimentalSleepingForOffloadChanged`
* `AudioOffloadListener.onExperimentalOffloadedPlayback`
PiperOrigin-RevId: 565035289
Previously any `CuesWithTiming.durationUs` could be `TIME_UNSET`,
meaning it should be replaced by the next `CuesWithTiming` instance
(instead of being merged if the durations overlap, which is currently
the expected behavior for all `CuesWithTiming` with a 'real' duration).
This technically allowed a single subtitle track to include a mixture of
`CuesWithTiming` that should be merged, and some that should be
replaced. This is not actually needed for any of the subtitle formats
currently supported by ExoPlayer - in all cases a format expects either
all cues to be merged, or each cue to replace the previous one.
Supporting this mixture of merging and replacing in `TextRenderer` ended
up being very complicated, and it seemed a bit pointless since it's not
actually needed. This change means a given subtitle track either merges
**all** cues (meaning `CuesWithTiming.durationUs = C.TIME_UNSET` is not
allowed), or **every** cue is replaced by the next one (meaning
`CuesWithTiming.durationUs` may be set (to allow for cues to 'time out',
needed for CEA-608), or may be `TIME_UNSET`).
This value will be used in a subsequent change that adds cue-merging
support to `TextRenderer`.
PiperOrigin-RevId: 565028066
This is equivalent to the existing `scaleLargeTimestamp` method with the
following changes/improvements:
* No longer specific to timestamps (there was nothing inherently
time-specific about the logic in `scaleLargeTimestamp`, but the name
and docs suggested it shouldn't be used for non-timestamp use-cases).
* Additional 'perfect division' checks between `value` and `divisor`.
* The caller can now provide a `RoundingMode`.
* Robust against `multiplier == 0`.
* Some extra branches before falling through to (potentially lossy)
floating-point math, including trying to simplify the fraction with
greatest common divisor to reduce the chance of overflowing `long`.
This was discussed during review of 6e91f0d4c5
This change also includes some golden test file updates - these
represent a bug fix where floating-point maths had previously resulted
in a timestamp being incorrectly rounded down to the previous
microsecond. These changes are due to the 'some more branches' mentioned
above.
PiperOrigin-RevId: 564760748
While debugging various session tests failure I found that sometimes
this list was empty (e.g. when a controller had failed to connect, or
hadn't finished connecting yet) - resulting in these methods being
silent no-ops. I think it's basically never expected for there to be no
controllers connected when these methods are invoked, so this logs at
ERROR level to give a clue of what happened when looking at the test
logcat.
PiperOrigin-RevId: 564750969
For pause and resume feature we need to use same `MuxerWrapper`
for `remuxing processed video` and then to `process remaining video`.
In order to use same `MuxerWrapper` across `different Exports`
we need to preserve its state.
PiperOrigin-RevId: 564728396
This aligns the equivalent implementation in `MockMediaSessionService`,
and it looks more correct to me - but the tests seem to pass both with
and without this change (and it doesn't seem to affect flakiness
either).
PiperOrigin-RevId: 564689493
It's much better to merge the windows at source level to reflect the
same state everywhere (e.g. notifications, player state, etc). This
can be done with ConcatenatingMediaSource2.
PiperOrigin-RevId: 563715718
There is no known use case left that needs to be solved by this
class. All other use cases are better solved by alternative
approaches (Player playlist methods or ConcatenatingMediaSource2).
PiperOrigin-RevId: 563713384
The class currently disallows offsets of periods in their windows
except for the very first window. This is not necessary because
we can use TimeOffsetMediaPeriod to eliminate the offset if needed.
This makes the class more useful for many use cases, in particular
for using it with ClippingMediaSource.
Issue: google/ExoPlayer#11226
PiperOrigin-RevId: 563702120
Modifying dumping to not required "released" to be called.
Track index is an arbitrary value based on the order of addTrack calls.
Samples are dumped by track (rather than as soon as they are written),
so it's preferable to use a value that provides more context.
By using the track type as a key, dump files will be more deterministic
and will have more similarities when branched.
PiperOrigin-RevId: 563700982
This callback asks to correct the media time in a composition, but doesn't
provide the MediaPeriodId as the necessary context to do this.
PiperOrigin-RevId: 563699344
That said, only SDR is supported for now, so this will always throw if
HDR is input. This will also throw if different ColorInfo values are input
because color SDR mixing (ex. between sRGB and BT709) is not yet supported.
PiperOrigin-RevId: 563457729
While investigating a different test failure on a pending change I
noticed that sometimes the "testAddSessions_removedWhenClose" session
was being released before it could be fully connected - and this
results in a failure like:
```
expected not to contain: androidx.media3.session.MediaSession@50a9ef1
but was : [androidx.media3.session.MediaSession@50a9ef1, androidx.media3.session.MediaSession@3a6bac]
at androidx.media3.session.MediaSessionServiceTest.addSessions_removedWhenReleased(MediaSessionServiceTest.java:376)
```
It also shows up in the logs like:
```
MediaController future failed (so we couldn't release it)
...
Caused by: java.lang.SecurityException: Session rejected the connection request.
```
Adding some debug logging revealed that the `session.release` call
posted to the test thread was happening before the call to
`MediaSessionStub.connect` on the main thread (this is triggered deep
in prod media3 session logic).
PiperOrigin-RevId: 563431265
Instead of invoking "undefined behavior" may occur when a class is used
incorrectly, which is clear but not very helpful to callers, specify what Apps
or users of a class should do when issues occur.
Apply this to Compositor as well, where this otherwise might seem unclear.
PiperOrigin-RevId: 563406219
For pause and resume feature we will need to build `ExportResult`
from multiple internal Exports. Keeping the `ExportResultBuider` in
`Transformer` class will allow using same builder across different
internal exports.
PiperOrigin-RevId: 563392443
This change ensures that a different package is used for
`test_session_current/src/main:support_app` and
`test_session_current/src/androidTest:test_app` - previously they used
the same package which was unusual (and possibly led to some confusing
behaviour).
PiperOrigin-RevId: 563051818
