We currently report MediaCodec exceptions as unexpected exceptions instead of
as renderer error. All such exceptions are now wrapped in a new DecoderException
to allow adding more details to the exception.
PiperOrigin-RevId: 252054486
It's only thrown in an edge case on API level 20 and below. If it
is thrown it causes playback failure when playback could succeed,
by throwing up through configureCodec.
It seems better just to catch the exception and have the codec be
configured using the format's own width and height.
PiperOrigin-RevId: 251745539
We currently don't display the last frame because the seek time is behind the
last frame's timestamps and it's thus marked as decodeOnly.
This case can be detected by checking whether all data sent to the codec is
marked as decodeOnly at the time we read the end of stream signal. If so, we
can re-enable the last frame. This should work for almost all cases because the
end-of-stream signal is read in the same feedInputBuffer loop as the last
frame and we therefore haven't released the last frame buffer yet.
Issue:#2568
PiperOrigin-RevId: 251425870
Using parallel adaptation for Formats without bitrate information currently
causes an exception. Handle this gracefully and also cases where all formats
have the same bitrate.
Issue:#5971
PiperOrigin-RevId: 250682127
Setting the requested encoding in all cases ensures we receive the relevant
response headers indicating whether gzip was used. Doing that allows to
detect the content length in cases where gzip was requested, but the server
replied with uncompressed content.
PiperOrigin-RevId: 250660890
cache() opens all connections with unset length to avoid position errors.
This makes more data then needed to be downloading by the underlying
network stack.
This fix makes makes it open connections for only required length.
Issue:#5927
PiperOrigin-RevId: 250546175
"Write case, lock not available" was a bit confusing. When the
content is not cached and the lock is held, it's neither a read
or a write case. It's a "can't do anything" case. When blocking,
it may subsequently turn into either a read or a write.
PiperOrigin-RevId: 250530722
The former is deprecated and replaced by the latter in Mockito 2. However, there is a
functional difference: ArgumentMatchers will reject `null` and check the type
if the matcher specified a type (e.g. `any(Class)` or `anyInt()`). `any()` will
remain to accept anything.
PiperOrigin-RevId: 250458607
Removes the need for duplicate calls to SampleQueue#read when
implementing DecryptionResources acquisition in the MediaSources.
PiperOrigin-RevId: 250298175
According to Cue's constructor (for bitmaps) documentation:
+ cuePositionAnchor does horizontal anchoring.
+ cueLineAnchor does vertical anchoring.
Usage is currently inverted.
Issue:#5633
PiperOrigin-RevId: 250253002
The only known use case for contentTypePredicate is to catch
the case when a paywall web page is returned via a DataSource,
rather than the data that was being requested. These days streaming
providers should be using HTTPS, where this problem does not exist.
Devices have also gotten a lot better at showing their own
notifications when paywalls are detected, which largely mitigates
the need for the app to show a more optimal error message or
redirect the user to a browser.
It therefore makes sense to deprioritize this feature. In
particular by removing the arg from constructors, where nearly
all applications are probably passing null.
PiperOrigin-RevId: 249634594
This prevents further unexpected updates if the MediaSource happens to
finish its preparation at a later point.
Issue:#5915
PiperOrigin-RevId: 249439246
The SurfaceListener just sets the surface on the VideoComponent, but
SphericalSurfaceView already accesses the VideoComponent directly so it seems
simpler to update the surface directly.
PiperOrigin-RevId: 249242185
We are currently defaulting to targetSdk=1 as no targetSdk is specified. Only
tests which explicitly ask for another SDK use another test SDK. With the
versioned manifest, all tests run using the targetSDK by default.
PiperOrigin-RevId: 249060796
If a PlayerMessage throws an exception, it is currently not deleted from the
list of pending messages. This may be problematic as the list of pending
messages is kept when the player is retried without reset and the message is
sent again in such a case.
PiperOrigin-RevId: 247414494
Adding an explicit option to clear all downloads prevents repeated database
access in a loop when trying to delete all downloads.
However, we still create an arbitrary number of parallel Task threads for this
and seperate callbacks for each download.
PiperOrigin-RevId: 247234181
1. A content session after an ad has been played was not re-marked as active,
leading to new ad session being marked as active too early.
2. Switching from content to post-roll ended the content session because
the return value of getAdGroupTimeUs of C.TIME_END_OF_SOURCE was not
handled. Using the nextAdGroupIndex instead.
PiperOrigin-RevId: 246977327
As justification for why we should not have this type of logging,
it would scale up to about 13K LOC, 1800 Strings, and 36K (after
pro-guarding - in the case of the demo app) if we did it through
the whole code base*. It makes the code messier to read, and in
most cases doesn't add significant value.
Note: I left the Scheduler logging because it logs interactions
with some awkward library components outside of ExoPlayer, so is
perhaps a bit more justified.
* This is a bit unfair since realistically we wouldn't ever add
lots of logging into trivial classes. But I think it is fair
to say that the deltas would be non-negligible.
PiperOrigin-RevId: 246181421
- Removed DownloadInternal and its sometimes-out-of-sync
duplicate state
- Fixed downloads being in STOPPED rather than QUEUED state
when the manager is paused
- Fixed setMaxParallelDownloads to start/stop downloads if
necessary when the value changes
- Fixed isWaitingForRequirements
PiperOrigin-RevId: 246164845
They behave identically, and the old names are being removed.
Open-source note: The new methods are available in Truth as of version 0.44.
END_PUBLIC
More information:
go/issameas-lsc
Tested:
TAP --sample ran all affected tests and none failed
http://test/OCL:246024032:BASE:246042619:1556672975894:513e7746
PiperOrigin-RevId: 246101315
Can happen if the load position falls behind in every playlist and
when we try to load the next segment, the adaptive selection logic
decides to change variant.
Issue:#5816
PiperOrigin-RevId: 245923006
This resolves some naming confusion that previously existed
as a result of DownloadThread also being used for removals.
Some related variables (e.g. activeDownloadCount) would refer
to both download and removal tasks, whilst others
(e.g. maxParallelDownloads) would refer only to downloads.
This change renames those that refer to both to use "task"
terminology.
This change also includes minor test edits.
PiperOrigin-RevId: 245913671
[Problem]
There are 3 services / modes transported on line 21:
- Captioning
- TEXT (generally not program related)
- XDS (eXtended Data Services)
Bytes belonging to the unsupported modes are interleaved with the
bytes of the captioning mode.
See Chapter 7, Chapter 8.5 and Chapter 8.6 of the CEA608 Standard for
more details.
[Solution]
Drop all bytes belonging to unsupported modes.
[Test]
- All streams containing only captioning services should not be influenced
- Test all 4 CEA 608 channels with live over-the-air content and
using all available TEXT and XDS streams.
There are no logic changes here. It's just moving code around and removing
the "internal" part of names where no longer required.
PiperOrigin-RevId: 245407238
We currently toggle the view in onTouchEvent ACTION_DOWN which is non-standard
and causes problems when used in a ViewGroup intercepting touch events.
Switch to standard Android click handling instead which is also what most
other player apps are doing.
Issue:#5784
PiperOrigin-RevId: 245219728
The AndroidX bundled version (0.42) lags behind the most up-to-date public
release (0.44) making it more difficult to stay close to the actual head
revision which is used internally.
PiperOrigin-RevId: 244848568
This ensures we keep the loading period in sync with the the playing period in
PlybackInfo, when the latter changes to something new.
PiperOrigin-RevId: 244838123
Also re-enable two of them, although note that the fix here is
not related to the flakiness that caused them to be disabled.
I'm re-enabling them since much has changed in DownloadManager,
and the hope is that these tests are no longer flaky.
PiperOrigin-RevId: 244826225
Experiments show this is beneficial for rebuffers with only minor impact
on battery usage.
Configurations which explicitly set a minimum buffer duration are unaffected.
Issue:#2083
PiperOrigin-RevId: 244823642
Before this change we'd release the audio track and create a new one as soon
as audio processors had drained when reconfiguring.
Fix this behavior by stop()ing the AudioTrack to play out all written data.
Issue: #2446
PiperOrigin-RevId: 244812402
- We had buildAddRequest and sendNewDownload. Converged to
buildAddDownload and sendAddDownload.
- Also fixed a few more inconsistencies, and brought the
action constants into line as well.
PiperOrigin-RevId: 244274041
- Listener based reporting of progress allows the content length
to be persisted into the download index (and notified via a
download state change) as soon as it's available.
- Moved contentLength back into Download proper. It should only
ever change once, so I'm not sure it belongs in the mutable part
of Download.
- Made a DownloadProgress class, for naming sanity.
PiperOrigin-RevId: 244242487
1. customCacheKey for DASH/HLS/SS is now asserted against
in DownloadRequest
2. Merging of event delivery in DownloadManager is very
tricky to get right and probably not a good idea
PiperOrigin-RevId: 244048392
Currently SimpleCache will touch cache spans whenever it reads
from them. With legacy SimpleCache setups this involves a potentially
expensive file rename. With new SimpleCache setups it involves
a more efficient but still non-free database write.
For offline use cases, and more generally any use case where the
eviction policy doesn't use last access timestamps, touching is
not useful. This change allows the evictor to specify whether it
needs cache spans to be touched or not. SimpleCache will only touch
spans if the evictor requires it.
Note: There is a potential change in behavior in cases where a
cache uses an evictor that doesn't need cache spans to be touched,
but then later switches to an evictor that does. The new evictor
may temporarily make sub-optimal eviction decisions as a result.
I think this is a very fair trade-off, since this scenario is
unlikely to occur much, if at all, in practice, and even if it
does occur the result isn't that bad.
PiperOrigin-RevId: 244005682
One goal we forgot about a little bit was to allow applications
to provide their own index implementation. This requires the
writable side to also be defined by an interface.
PiperOrigin-RevId: 243979660
ImaAdsLoader gets the player position after the app releases
the player to support resuming ads at their current position
if the same ads loader is reused.
PiperOrigin-RevId: 243969916
ShadowLooper -> ShadowLegacyLooper
ShadowRealisticLooper -> ShadowPausedLooper
ShadowBaseLooper -> ShadowLooper
And all public methods from ShadowLegacyLooper get pushed up to ShadowLooper
Pull Request: https://github.com/robolectric/robolectric/pull/4868
Copybara: OK
Also adjust Google3 tests using custom looper shadows where necessary.
Convert exoplayer to paused looper to eliminate reliance on custom shadows
PiperOrigin-RevId: 243839311
The removed condition only applies when prepare fails and no timeline was or
is known. We should keep a pending seek position in such a case. The internal
player does the same thing already.
PiperOrigin-RevId: 243819466
- Expose constructors that take DatabaseProvider. Deprecate those
that do not.
- Expose Cache.getUid. This will likely be used for naming of the
tables accessed by DefaultDownloadIndex .
PiperOrigin-RevId: 243637786
- Allows enforcing immutability, which in a future CL will allow
avoiding allocating a new array/list on every call.
- Also some left over doc cleanup from the DownloadState rename.
PiperOrigin-RevId: 243627352
The old domain automatically forwards to the new one. For consistency, change
all doc and code references regardless.
Also adds GitHub CNAME config file which configures our page for the custom
domain.
PiperOrigin-RevId: 243592110
handleSourceInfoRefreshed checks for various conditions which may trigger a
change in position. In all cases, we need to resolve the new position for ads,
and if the corresponding MediaPeriods already exist, perform the seek to the new
position.
This change simplified the code by
1. Moving all conditions in a single if-else structure which just determines
the new playback position. This makes it easier to read and to follow.
2. Doing the subsequent seek and position update in one final step to remove
duplicated code.
As a side effect, it also improves some edge cases. For example when skipping
an ad to an already prebuffered period, we now properly update the existing
prebuffered period.
PiperOrigin-RevId: 243588014
- Make a best effort to avoid posting MSG_DOWNLOAD_THREAD_STOPPED
if the internal thread has already quit. Doing so is harmless,
but causes an error in Logcat. We used to generate this warning
quite a bit in ExoPlayerImplInternal as well, and we got quite
a few issues filed about it, so best to avoid it if possible.
- Null out the back reference DownloadThread holds to its manager
on release. This avoids a potential issue where a download thread
can prevent GC of its manager if it doesn't cancel quickly.
There's similar logic (with a similar comment) in Loader.LoadTask.
PiperOrigin-RevId: 243365143
- Rename getAllDownloads to getCurrentDownloads to make it clear
that it doesn't include completed and failed downloads
- Change getDownloadCount to isWaitingForRequirements, which is
what it's used for. Added TODO to make it returns the right thing
PiperOrigin-RevId: 243257856
If the returned retry delay is unset, we should use a DONT_RETRY_FATAL action
instead and dispatch the event with the "canceled" flag.
PiperOrigin-RevId: 243251554
Non-trivial download state transitions are currently split across
DownloadManager and Download. These transitions are part of the
same state machine, so it's clearer if they're all in the same place
(i.e. DownloadManager, since this is the component that transitions
downloads between states).
PiperOrigin-RevId: 243249915
The only state DownloadInternal holds is duplicate of state contained
in Download, but can confusingly be temporarily out of sync. This is
error prone because it's easy to use the wrong variable (e.g.
download.state vs state). DownloadInternals methods are called into
and call out into DownloadManager, which makes some code paths that
are quite hard to follow.
It's possible to simplify DownloadManager quite a lot by removing the
duplicated state in DownloadInternal, at which point DownloadInternal's
methods flatten into DownloadManager, which can just hold an internal
list of Downloads directly.
This is a first step, which makes it clear that DownloadThready only
needs its immutable DownloadAction + an isRemove flag.
PiperOrigin-RevId: 243245288
Put methods into a more sensible order (the same order as
in the switch statement, which is a more natural order with
e.g. initialize coming first and release coming last).
PiperOrigin-RevId: 242891742
- Changed startDownloads/stopDownloads back to their previous behavior
of starting and stopping all downloads at the manager level.
- Made setManualStopReason methods for the new case of setting a manual
stop reason or some or all downloads.
- Added plumbing to specify an initial manual stop reason when adding a
new download, without also overwriting the manual stop reasons of all
other preexisting downloads. Using the value is left as a TODO pending
a bit of further cleanup that'll make it easier.
PiperOrigin-RevId: 242891688
- Remove completed downloads from progress notification.
- Treat restarting as a downloading, When there are both
remove and download tasks ongoing, we prefer to show a
download notification to a remove one. A restarting task
encapsulates is basically a (remove+download) task. Given
our preference, we should treat it as a download rather
than as a removal.
PiperOrigin-RevId: 242867228
Both manifest loads currently use the default retry delay although a
LoadErrorHandlingPolicy is provided to the MediaSource.
PiperOrigin-RevId: 242852672
- Remove NETWORK_TYPE_NOT_ROAMING and NETWORK_TYPE_METERED
because JobScheduler doesn't support them, and they're
probably not useful to many people (data when roaming is
normally enabled/disabled at the OS level, and restricting
to *only* metered networks seems niche)
- Convert network requirements proper flags
- Stop persisting requirements in DownloadIndex. The direction
we're headed to solve the manager start/stop problem is
going to involve state in DownloadManager determining whether
downloads actually start, and if we're doing that then it's
no worse to do it for this as well
PiperOrigin-RevId: 242713196
Robolectric calls messages posted to the main thread immediately inline. This
will change in the upcoming release and will break tests implicitly relying
on that behavior.
Update ConcatenatingMediaSourceTest to actually wait for the posted message.
PiperOrigin-RevId: 242631531
HashMap.values does not guarantee a stable order, but our tests
assert that the order is stable. It's probably a nice property
that the order is the same as that in which downloads are added,
so this change makes the order stable, with that order.
A future change will likely improve the way this works, by
changing the internal thread "downloads" variable to have type
ArrayList<Download>, at which point the internal thread can just
pass a read-only copy of its list to the main thread whenever a
state changes.
PiperOrigin-RevId: 242460725
- Fix ID being dropped when DownloadAction is serialized and
de-serialized as it's passed to DownloadService
- Properly set DownloadAction.id when building an action from
a DownloadState
- Make ID a required constructor argument. Else it's too easy
to not propagate it by accident.
PiperOrigin-RevId: 242457831
Remove MediaCodecSelector.DEFAULT_WITH_FALLBACK, as codec selectors
will need to be able to return a list of decoder infos even when not
using fallback in a later change. Instead signal that fallback should
be used via a renderer constructor.
Fallback is always disabled for audio.
PiperOrigin-RevId: 242454172
Adding a protected method for that allows to supply a customized
TrackOutputProvider to the ExtractorWrapper used by the ContainerMediaChunk
(e.g. for logging purposes).
The alternative would be to provide a TrackOutputProvider through the
ChunkSampleStream constructor, but the extra initialization taking place
in the ChunkSampleStream constructor would need to move somewhere else and
some methods of BaseMediaChunkOutput would need to move to the
TrackOutputProvider interface. This seems too much effort for niche
customization case.
PiperOrigin-RevId: 242448776
The position should be subtracted from the total content length
retrieved from the cache in this case, both for iteration and for
filling out counters.contentLength (for the latter, note not
doing it this way is inconsistent with what happens when dataSpec
length is set to a known value).
PiperOrigin-RevId: 242445034
It's a transient state whose only use is when passing a removed
download to onDownloadStateChanged. It's a bit strange to have it
as a proper state, since we end up asserting that it's an invalid
value in other places.
This change adds an explicit onDownloadRemoved, which allows
removal of the transient STATE_REMOVED, related assertions, and
uncertainty when dealing with an @State variable whether it's
necessary to handle it being STATE_REMOVED.
PiperOrigin-RevId: 242444128
This is the last cl of a series of cls that will convert DownloadManager
threading model as public methods post actions on an internal thread
which then do the work.
PiperOrigin-RevId: 242437229
The priority task manager only needs to listen to loading state changes and
is independent of the rest of DefaultLoadControl. This also fixes problems
where the player stops loading without consultin the LoadControl.
PiperOrigin-RevId: 242098374
This is the second cl of a series of cls that will convert DownloadManager
threading model as public methods post actions on an internal thread
which then do the work.
PiperOrigin-RevId: 241773765
Necessary for implementing scheme-independant resource management.
Example: A media source needs to have ownership of a crypto resource
while samples are in buffer (but not yet in the renderer).
PiperOrigin-RevId: 241698575
Most of our components that have Handler instances for calling
back to application code instantiate the Handler using Util.getLooper
in the constructor. This makes the two components that do
something else consistent with that model.
PiperOrigin-RevId: 241545575
If no track matches the preferred language or no preferred language is provided,
use the system Locale language as the next decision criterion.
PiperOrigin-RevId: 241322703
- This removes the need for Variant and Rendition to have a common
base class, allowing the url field to be marked as @Nullable in
Rendition but not in Variant.
- The addition of mediaPlaylistUrls is needed for the new StreamKey
indexing for HLS. It's also convenient in a couple of places (e.g.
HlsDownloader), where a list of all media playlist URLs is needed.
- Lots of places where HlsUrl was passed only needed the actual
URL (not the Format, which is the other piece of HlsUrl). Passing
just the URL is a little simpler, and resolves some of the naming
confusion.
Issue: #5596
Issue: #2600
PiperOrigin-RevId: 240970466
This is to make it possible to use equality of HlsUrl.url fields
to determine whether two HlsUrls point at the same media playlist.
This doesn't work currently because it's possible to mix absolute
and relative urls, which will not be equal until after the relative
url is resolved against the playlist baseUrl.
Issue: #5596
Issue: #2600
PiperOrigin-RevId: 240966503
Also make combination of language and role flags the default over the label,
as it's more readable and auto-translated into other languages.
PiperOrigin-RevId: 240801070
Custom factories currently need to copy most of the code in the
AdaptiveTrackSelection.Factory to make use of the same functionality.
Simplify this by allowing to overwrite the factory.
PiperOrigin-RevId: 240773271
This is the first of a series of cls that will convert DownloadManager
threading model as public methods post actions on an internal thread
which then do the work.
PiperOrigin-RevId: 240743400
Still skipping any renditions that have a null URL, which means that
closedCaptions in particular is always empty. This restriction will
be removed in a subsequent change, which will also remove muxedAudioFormat
and muxedAudioCaptions from HlsMasterPlaylist and instead derive them
from the Variant and Rendition information in HlsMediaPeriod.
Issue: #5596
Issue: #2600
PiperOrigin-RevId: 240623500
The one functional change here is to require subclasses to implement getForegroundNotification. It seems easier and less error prone to
force developers to implement it than it does to document the cases
in which they need to override it (which is most cases).
PiperOrigin-RevId: 240566737
Issue: #5596
This arguably made a worse problem than it solved, and also I think subtly broken HLS
downloads by changing which renditions HlsMasterPlaylist.copy would retain in some
cases. Reverting as a mini step toward removing smart logic from the HLS playlist parser.
*** Original commit ***
Expand check for muxed audio media tags to include uris that match variants
Issue:#5313
***
PiperOrigin-RevId: 240348969
If enabled, DefaultTrackSelector returns multiple groups with more than one
track. AdaptiveTrackSelection then decides on the order in which the tracks
are changed such that the BandwidthProvider for each selection can figure out
the allocated bandwidth.
PiperOrigin-RevId: 240150206
It's currently very difficult to actually set a reason for track selection
triggered by a SelectionOverride. It would require creating a new custom
TrackSelection.Factory where the reason gets injected somehow before the
override is specified on the player.
Simplify this whole procedure by allowing to set the reason directly and
forward this reason to all fixed selections created based on this override.
PiperOrigin-RevId: 240114942
3 ("11") is the reserved code for fscod in AC3. The spec says that "If the
reserved code is indicated, the decoder should not attempt to decode audio and
should mute."
We currently throw an exception as we try to access an array with an invalid
index. Now ignoring the track instead by invalidating the format.
Issue:#5638
PiperOrigin-RevId: 240106255
This allows to distinguish between regional variants and scripts.
We still need to normalize the language code itself to make track selection
independent of the whether 2 or 3 letter codes are used.
PiperOrigin-RevId: 239783115
Any seek map with non-zero offsets breaks playback with ICY metadata as
the metadata is no longer read from the correct position.
Issue:#5658
PiperOrigin-RevId: 239605839
