Some have been deprecated since 2.13.0
([commit](5b9fa7d7d9)):
* `setDrmSessionManager(DrmSessionManager)`
* `setDrmHttpDataSourceFactory(HttpDataSource.Factory)`
* `setDrmUserAgent(String)`
And the rest have been deprecated since 2.12.0
([commit](d1bbd3507a)):
* `setStreamKeys(List<String>)`
* `createMediaSource(Uri)`
PiperOrigin-RevId: 417622794
We check the fraction of the available duration we have already
buffered for live streams to see if we can increase the quality.
This fraction compares against the overall available media duration
at the time of the track selection, which by definition can't include
one of the availabe chunks (as this is the one we want to load next).
That means, for example, that for a reasonable live offset of 3 segments
we can at most reach a fraction of 0.66, which is less than our default
threshold of 0.75, meaning we can never switch up.
By subtracting one chunk duration from the available duration, we make
this comparison fair again and allow all live streams (regardless of
live offset) to reach up to 100% buffered data (which is above our
default value of 75%), so that they can increase the quality.
Issue: google/ExoPlayer#9784
PiperOrigin-RevId: 416791033
Before the introduction of the MediaCodecAdapter, users could get
access directly to the MediaCodec instance from
MediaCodecRenderer.getCodec() and then retrieve the codec metrics.
This change exposes MediaCodec.getMetrics() on the MediaCodecAdapter.
Issue: google/ExoPlayer#9766
#minor-release
PiperOrigin-RevId: 416343023
*** Original commit ***
Make audio track min buffer size configurable.
Move the code in its own class as DefaultAudioTrack
is getting very big. It also help for testability.
The new class is easily configurable and highly tested.
Manual test was used to catch any regression.
https://github.com/google/ExoPlayer/issues/8891
***
PiperOrigin-RevId: 415469179
Move the code in its own class as DefaultAudioTrack
is getting very big. It also help for testability.
The new class is easily configurable and highly tested.
Manual test was used to catch any regression.
https://github.com/google/ExoPlayer/issues/8891
PiperOrigin-RevId: 415268938
The color set via textAppearance is overridden by any non-null
textColor set directly on the style. We always want the specific
properties the textAppearance specifies, so set them directly to
prevent them from being overridden.
#minor-release
Issue: google/ExoPlayer#9765
PiperOrigin-RevId: 414967143
`DefaultAudioSink` already has 3 telescoping
constructors and an other one would be have been
needed to add a buffer size tuning option.
PiperOrigin-RevId: 414703366
It's been observed that some devices fail when releasing a secure codec
attached to a surface and immediately trying to create a new codec
(secure or insecure) attached to the same surface. This change catches
all exceptions thrown during codec creation, sleeps for a short time,
and then retries the codec creation. This is observed to fix the problem
(we believe this is because it allows enough time for some background
part of the previous codec release operation to complete).
This change should have no effect on the control flow when codec
creation succeeds first time. It will introduce a slight delay when
creating the preferred codec fails (while we sleep and retry), which
will either delay propagating a permanent error or attempting to
initialize a fallback decoder. We can't avoid the extra delay to
instantiating the fallback decoder because we can't know whether we
expect the second attempt to create the preferred decoder to succeed or
fail. The benefit to always retrying the preferred decoder creation
(fixing playback failures) outweighs the unfortunate additional delay
to instantiating fallback decoders.
Issue: google/ExoPlayer#8696
#minor-release
PiperOrigin-RevId: 414671743
Using chunkless preparation greatly improves start up time if the master
playlist declares CODECS for the renditions. Hence, we turn this on
by default as it benefits most well-defined HLS master playlists.
The only known reason why developers may want to turn this feature off is
when the renditions contain muxed closed-caption tracks that are not
declared in the master playlist. So this change also updates the documentation
and RELEASENOTES to point out this caveat.
PiperOrigin-RevId: 413950036
Allowing duplicate groups caused some other code working with the
array to use reference equality comparison. This is error-prone,
easily forgotten (e.g. when using the TrackGroups in a map) and
causes bugs when TrackGroups are serialized to disk or to another
process.
All TrackGroups created by ExoPlayer are already unique and custom
code creating TrackGroupArrays with identical groups can easily
distringuish them by adding an id to each group.
Issue: google/ExoPlayer#9718
PiperOrigin-RevId: 413617005
This will remove the need to implement compat code handling very old API
versions where some symbols are not available, and it reduces the burden of
dealing with media framework issues around concurrent codec usage that are
worse on older API versions. Top apps that we've surveyed as potential users
for transformer library features are using API 21 or later.
PiperOrigin-RevId: 413341540
Currently we prefer technical preferences set in the Parameters over
content preferences implied by the media. It proably makes more
sense in the opposite order to avoid the situation where a
non-default track (e.g. commentary) is selected just because it
better matches some technical criteria.
Also add comments explaining the track selection logic stages.
PiperOrigin-RevId: 412840962
And also tweak existing role flag logic to strictly prefer perfect
matches over partial matches.
Caveat: Video role flags only supported for fixed track selections
(same issue as Issue: google/ExoPlayer#9519).
Issue: google/ExoPlayer#9402
PiperOrigin-RevId: 412292835
After removing the deprecated call to player.stop(/* reset= */ true) and instead using two calls to the player, overridding stop in a ForwardingPlayer does not help to avoid clearing the player. To remove the deprecation we need an option so that users who want not to clear the player have a way to do so.
PiperOrigin-RevId: 411518090
The player will not play ads in final states (played, skipped, error)
again. To allow ads loader customizations to play ads again, we can
add a method that resets the state back to available or unavailable
(depending on whether we have the URI for the ad).
Issue: google/ExoPlayer#9615
PiperOrigin-RevId: 411042842
Currently, DrmSessionManager takes player specific values (= the
playback looper) through (pre)acquireSession calls and requires
the caller to pass in the same values every time.
Instead, we can configure the DrmSessionManager for playback with
a player once before it's being used. We can't simply extend the
prepare() method as prepare may be called before the player is
created to prewarm the DrmSessionManager.
The new method also takes a PlayerId which is bound to the lifetime
of the player similar to the playback looper.
To avoid breakage of custom MediaSources with DRM, we can keep the
old the SampleQueue.createWithDrm method as deprecated.
PiperOrigin-RevId: 410998240
Populate ICY headers into MediaMetadata so that they can
propagate to the app via AnalyticsListener#onMediaMetadataChanged().
This change copies IcyHeaders.name into MediaMetadata.description
and IcyHeaders.genre into MediaMetadata.genre.
Note: MediaItem.metadata maintain their precedence and overwrite any
ICY headers parsed.
Issue: google/ExoPlayer#9677
#minor-release
PiperOrigin-RevId: 410495676
We already parse essential and supplemental properties from the
Representation, but don't add them to our Representation class so that
they can be accessed by users.
Issue: google/ExoPlayer#9579
PiperOrigin-RevId: 409961990
When we have multiple overrides for TrackGroups associated with
one renderer, we need to look at all of them to find the non-empty
one. Empty ones should only be used to remove previously selected
tracks for this group and otherwise be ignored.
Currently this is broken because the first override (no matter if
it's empty or not) is used as the final selection for this renderer.
Issue: google/ExoPlayer#9649
#minor-release
PiperOrigin-RevId: 407792330
Add protected method DefaultRenderersFactory.getCodecAdapter(), so that
subclasses of DefaultRenderersFactory that override
buildVideoRenderers() or buildAudioRenderers() can access the
DefaultRenderersFactory codec adapter factory and pass it to
MediaCodecRenderer instances they may create.
#minor-release
PiperOrigin-RevId: 407345431
Where this introduced an inconsistency (e.g. assigning to something
called `windowIndex`), I generally renamed the transitive closure of
identifiers to maintain consistency (meaning this change is quite
large). The exception is code that interacts with Timeline and Window
directly, where sometimes I kept the 'window' nomenclature.
#minor-release
PiperOrigin-RevId: 407040052
Test file produced with:
$ MP4Box -add "sample.mp4#video:colr=nclc,1,1,1" -new sample_18byte_nclx_colr.mp4
And then manually changing the `nclc` bytes to `nclx`.
This produces an 18-byte `colr` box with type `nclx`. The bitstream of
this file does not contain HDR content, so the file itself is invalid
for playback with a real decoder, but adding the box is enough to test
the extractor change in this commit.
(aside: MP4Box will let you pass `nclx`, but it requires 4 parameters, i.e. it
requires the full_range_flag to be set, resulting in a valid 19-byte colr box)
#minor-release
Issue: #9332
PiperOrigin-RevId: 405842520
The static and dynamic metadata now build up in a list, such that when
the MediaMetadata is built, they are applied in an event order. This
means that newer/fresher values will overwrite older ones. The MediaItem
values are then applied at the end, as they take priority over any other.
#minor-release
PiperOrigin-RevId: 405383177
Issue: #9392 reports occasional IllegalStateExceptions from release()
in crashlytics,`with no way to reproduce locally. It seems likely there
is a bug somewhere in DRM handling, and ideally we would find that and
fix it.
However we haven't been able to find the problem, and in the meantime
these exceptions cause the entire app to crash. Although this is
arguably useful from a debugging perspective, it's obviously a poor
experience for developers and users, since all we're actually trying to
do is release the session, so maybe we shouldn't strictly care that it's
already released?
This change replaces the exception with an error log, which might be a
useful debugging hint if we see other DRM unexpected behaviour due to
references to released sessions being held for too long.
PiperOrigin-RevId: 403942546
The possibilities to set a ControlDispatcher have been removed in
<unknown commit> so that the ControlDispatcher is always a
DefaultControlDispatcher.
PiperOrigin-RevId: 403327092
*** Original commit ***
Rollback of 8ed6c9fcf5
*** Original commit ***
Fix capitalization of language in track selector
Issue: #9452
***
***
PiperOrigin-RevId: 400942287
This change makes asynchronous queueing non-experimental, it enables the
feature by default on devices with API level >= 31 (Android 12+) and
exposes APIs for apps to either fully opt-in or opt-out from the
feature.
The choice to use or not asynchronous queueing is moved out of
MediaCodecRenderer to a new MediaCodecAdapter factory, the
DefaultMediaCodecAdapterFactory. This is because, at the moment,
if an app passes a custom adapter factory to a MediaCodecRenderer and
then enables asynchronous queueing on it, the custom
adapter factory is not used but this is not visible to the user.
The default behavior of DefaultMediaCodecAdapterFactory is to create
asynchronous MediaCodec adapters for devices with API level >= 31
(Android 12+), and synchronous MediaCodec adapters on devices with older
API versions.
DefaultMediaCodecAdapterFactory exposes methods to force enable or force
disable the use of asynchronous adapters so that applications can enable
asynchronous queueing on devices with API versions before 31 (but not
before 23), or fully disable the feature. For applications that build
MediaCodecRenderers directly, they will need to create a
DefaultMediaCodecAdapterFactory and pass it to the renderer constructor.
For applications that rely on the DefaultRenderersFactory, additional
methods have been added on the DefaultRenderersFactory to control
enabling/disabling asynchronous queueing.
Issue: #6348
PiperOrigin-RevId: 400733506
The fix for Issue: #8776 was to release and null-out dummySurface if
it doesn't match the security level of the decoder. But it's possible
that this.surface is already set to this.dummySurface, in which case we
must also null out this.surface otherwise we will later try and re-use
the old, released DummySurface instance.
This logic already exists in MCVR#onReset, so I pulled it into a
releaseDummySurface() helper function.
Issue: #9476
#minor-release
PiperOrigin-RevId: 399420476
- If DownloadService is configured to run as a foreground service,
it will remain started and in the foreground when downloads are
waiting for requirements to be met, with a suitable "waiting for
XYZ" message in the notification. This is necessary because new
foreground service restrictions in Android 12 prevent to service
from being restarted from the background.
- Cases where requirements are not supported by the Scheduler will
be handled in the same way, even on earlier versions of Android.
So will cases where a Scheduler is not provided.
- The Scheduler will still be used on earlier versions of Android
where possible.
Note: We could technically continue to use the old behavior on
Android 12 in cases where the containing application still has a
targetSdkVersion corresponding to Android 11 or earlier. However,
in practice, there seems to be little value in doing this.
PiperOrigin-RevId: 398720114
Issue: #9430
The current supported SDP (RFC2327) spec only allows for alpha-numeric
characters in the attribute-field. RFC4566 (section 9, token type) allowed
extra characters, and this CL adds the support.
PiperOrigin-RevId: 397301173
The deprecated `Player.addListener(EventListener)`
is moved out of Player into its subclasses
(CastPlayer and ExoPlayer).
This is unlikely to break users because:
- the method has been deprecated in the last major version
- the method is still present in the major implementations
If an users is affected, they can either:
- use ExoPlayer instead of Player
- (recommended) switch to Player.Listener.
Additionally update the threading guarantees that did not
reflect the current implementation.
PiperOrigin-RevId: 397272144
This was originally reported on #9390. There was a bug that when HLS
loads failed, the player would endlessly retry and never fail with a
player error.
This change fixes a bug in HlsSampleStreamWrapper.onPlaylistError()
which would return true for a playlist whose load encountered an error
but could not be excluded, whereas the method should return false.
Issue: #9390
#minor-release
PiperOrigin-RevId: 397045802
*** Original commit ***
Ensure MediaSourceFactory instances can be re-used
This fixes DefaultDrmSessionManager so it can be used by a new Player
instance (by nulling out its reference to the playback thread, which is
unique per-Player instance). This only works if the
DefaultDrmSessionManager is 'fully released' before being used by the
second Player instance, meaning that the reference count of the manager
and all its sessions is zero.
#exofixit
Issue: #9099
***
PiperOrigin-RevId: 396861138
Previously the released preacquired sessions would start their keepalive
timeout, and so no additional resources would be freed in time for the
manager to retry the session acquisition.
This change adds an additional purge of keepalive sessions *after* the
preacquired sessions are released, which fixes the problem.
#exofixit
#minor-release
PiperOrigin-RevId: 396613352
This is a candidate fix for #8906. As mentioned in that issue,
negative positions within windows might be (kind of) valid in
live streaming scenarios, where the window starts at some
non-zero position within the period. However, negative positions
within periods are definitely not valid. Neither are positions
that exceed the period duration.
There was already logic in ExoPlayerImplInternal to prevent a
resolved seek position from exceeding the period duration. This
fix adds the equivalent constraint for the start of the period.
It also moves the application of the constraints into Timeline.
This has the advantage that the constraints are applied as part
of state masking in ExoPlayerImpl.seekTo, removing any UI flicker
where the invalid seek position is temporarily visible.
Issue: #8906
PiperOrigin-RevId: 395917413
Instead of selecting the base URL initially or when a load error occurs, it is now selected when a chunk or initialization chunk is created. The selected base URL is then assigned to `RepresentationHolder.lastUsedBaseUrl` that is excluded in case of a load error. For a next chunk another base URL will be selected by using the `BaseUrlExclusionList`.
#minor-release #exo-fixit
PiperOrigin-RevId: 395721221
This fixes DefaultDrmSessionManager so it can be used by a new Player
instance (by nulling out its reference to the playback thread, which is
unique per-Player instance). This only works if the
DefaultDrmSessionManager is 'fully released' before being used by the
second Player instance, meaning that the reference count of the manager
and all its sessions is zero.
#exofixit
#minor-release
Issue: #9099
PiperOrigin-RevId: 395490506
I think this has been broken since 617267bfcf (which was trying to fix
the same problem).
This change initializes `rootDir` to always be the current project (i.e. ExoPlayer)
directory. From the [Gradle docs](https://docs.gradle.org/current/userguide/working_with_files.html#sec:single_file_paths):
> What happens in the case of multi-project builds? The file() method
> will always turn relative paths into paths that are relative to the
> current project directory, which may be a child project.
We can also then remove exoplayerRoot completely and simplify the local
dependency instructions.
* #minor-release
* #exofixit
* Issue: #9403
PiperOrigin-RevId: 395478121
Some server will send partial URIs in the RTP-Info header, while the RTSP spec
requires absolute URLs.
Issue: #9346
#exofixit
PiperOrigin-RevId: 395452741
- Fix focus when pausing and resuming
- Prevent repeated readout of the playback position when paused
#exofixit
#minor-release
Issue #9111
PiperOrigin-RevId: 395301765
The current detection logic checks that the two byte terminator starts
at an even position in the ID3 data, where-as it should check that it
starts at an even position relative to the start of the string.
#minor-release
#exofixit
Issue: #9087
PiperOrigin-RevId: 395274934
StyledPlayerControlView was checking whether the player is an ExoPlayer
instance to set the track selector. This means that, if apps were
wrapping an ExoPlayer in a ForwardingPlayer (to replace a
ControlDispatcher for example), the track selector wasn't set anymore.
#minor-release
PiperOrigin-RevId: 391776305
Adding a CHANGE_FRAME_RATE_STRATEGY_ALWAYS strategy is
omitted from this commit, since adding it is more complicated
than just plumbing it through and leaving everything else
unchanged. Specifically, VideoFrameReleaseTimeHelper would
need updating to behave differently when such a strategy is
enabled. It currently calls setFrameRate in cases such as
pausing, seeking and re-buffering, on the assumption that
changes to the underlying display refresh rate will only be
made if they can be done seamlessly. For a mode in which
this will not be the case, it makes more sense to stick to
the content frame-rate when these events occur. It may also
make sense to only use explicit content frame-rate values,
and not those inferred from individual frame timestamps.
Finally, for adaptive content containing a mix of frame-rates,
it makes sense to use the maximal frame-rate across all
variants, and to avoid calling setFrameRate on switches from
one variant to another.
Applications that know the frame-rate of their content can
set ExoPlayer's strategy to CHANGE_FRAME_RATE_STRATEGY_OFF and
then use setFrameRate directly on the output surface. Note that
this is likely to be a better option for apps than anything we
could implement in ExoPlayer, because the application layer
most likely knows the frame-rate of the content earlier than
ExoPlayer does (e.g., to perform the disruptive mode switch
at the same time as an activity transition).
Adding CHANGE_FRAME_RATE_STRATEGY_ALWAYS will be deferred
until there's clear demand for it. In the meantime, we'll
recommend the alternative approach above.
PiperOrigin-RevId: 389610965
Issue: #9254
#minor-release
We used to allow only alphanumerical characters in session id. The spec also
allows "$", "-", "_", ".", "+" (RFC2326 Sections 3.4 and 15.1).
PiperOrigin-RevId: 388873742
For audio-only playlists, when formats are communicated to the app with
AnalyticsListener.onDownstreamFormatChanged(), the passed MediaLoadData
do not indicate this is an audio track and therefore the
PlaybackStatsListener cannot derive audio format-related information.
This change sets the main SampleStreamWrappers track type to AUDIO, if
the master playlist contains only audio variants.
Issue: #9175
#minor-release
PiperOrigin-RevId: 388676060
This CL addresses the github issue [#8946](https://github.com/google/ExoPlayer/issues/8964). That issue requests support for `font-size` CSS property in WebVTT subtitle format. This CL:
* Adds support for `font-size` property by extending capabilities of WebVTT `CssParser`. Implementation of `font-size` property value parsing is based on the one in `TtmlDecoder`.
* Adds unit test along with test file containing WebVTT subtitles with all currently supported `font-size` units.
#minor-release
PiperOrigin-RevId: 388423859
Using all lower case RTSP headers is perfectly valid, as the spec mandates case
insensitively. However, some RTSP servers do not implement the RTSP spec
closely and does not recognize the lower case headers. This change aims
at using the header names as defined in the RTSP spec to maximize compatibility.
Issue: #9182
PiperOrigin-RevId: 386224566
Before this fix, if DefaultDrmSessionManager.release() was called while
there was at least one 'external' session reference still active (i.e.
session.referenceCount > 1) then the manager will release it's reference
immediately but when the session's reference count subsequently drops to
1 (due to external references being released) the manager will schedule
a task to release its internal reference *again*.
This change fixes the problem by only scheduling the timed release if
the manager is unreleased. This ensures that the internal references
are only released once.
Issue: #9193
#minor-release
PiperOrigin-RevId: 385580741
* Add release note for `RtspMediaSource.Factory.setTimeoutMs()`
* Remove mention of what we don't support (any such list is necessarily non-exhaustive)
* Remove markdown quote character ('>')
PiperOrigin-RevId: 385143574
This values won't be configurable from the UI anymore once the
DefaultControlDispatcher is removed.
They can be configured in the Player or by using a ForwardingPlayer.
PiperOrigin-RevId: 385113498
Issue: #9183
RFC2326 Section C.1.1 specifies that the URI to identify a track can be either
absolute (like rtsp://example.com/path) or relative (like "path"). Currently
we don't handle absolute URI, and this CL is to add the support.
Note though, we don't currently use the Content-Base or Content-Location
headers for the session URI.
PiperOrigin-RevId: 384649818
Also rename hasPrevious/Next to hasPrevious/NextWindow for consistency.
This makes it clearer what the difference between
seekToPrevious/NextWindow and seekToPrevious/Next is.
PiperOrigin-RevId: 384643373
MediaItem.mediaId used to default to the content URI, but this changed:
cc26a92e07
Before the mediaId change linked above, a playlist of different content
all with the same ad URI would play the ads for every item. After the
change the ad would only play once (because mediaId == "" for every
item, so they're all the same). This change restores roughly the
original behaviour by always considering both mediaId and the content
URI.
#minor-release
Issue: #9106
PiperOrigin-RevId: 382763618
The serialization scheme used here is custom, it doesn't need
to be compatible with emsg-v0 or emsg-v1 (since
97183ef558).
This means that C.TIME_UNSET will propagate correctly through the
serialization.
#minor-release
Issue: #9123
PiperOrigin-RevId: 382762873
Without this annotation it seems that `SimpleExoPlayer` effectively
'un-deprecates' the method, specifically:
* A usage of these methods isn't flagged by Android Studio if the
declared type is `SimpleExoPlayer` (up-casting to e.g.
`ExoPlayer.VideoComponent` results in the warning showing up).
* The `SimpleExoPlayer` javadoc doesn't mention this method is
deprecated:
https://exoplayer.dev/doc/reference/com/google/android/exoplayer2/SimpleExoPlayer.html#addVideoListener(com.google.android.exoplayer2.video.VideoListener)
* The Metalava API output for `SimpleExoPlayer` doesn't show these
methods as deprecated.
PiperOrigin-RevId: 382756174
Until now, we have stuck with the 3.12 long-term branch so as
to keep support for older API levels. However, this means that
the version we're using is 2.5 years old at this point. The
3.12 branch will stop receiving critical updates in December
2021.
Since use of the OkHttp extension is optional anyway, it seems
preferable to move to a modern version of OkHttp at this point.
PiperOrigin-RevId: 381465269
No-op change that adds the @FallbackType IntDef and changes the signature of getBlacklistDurationMsFor(LoadErrorInfo) to getExclusionDurationMsFor(@FallbackType, LoadErrorInfo).
PiperOrigin-RevId: 381075496
The problem occurs when the primary media playlist URL switches
from one whose latest snapshot has not yet got the ended tag, to
one whose latest snapshot already has the ended tag. In this case:
- We trigger a redundant load of the ended playlist.
- When the redundant load completes,
MediaPlaylistBundle.processLoadedPlaylist detects that the
playlist is unchanged from the one it already has, and so
doesn't call onPlaylistUpdated.
- PrimaryPlaylistListener.onPrimaryPlaylistRefreshed is never
called with the new primary. Hence the externally visible primary
is still the one that hasn't ended. HlsMediaSource therefore thinks
the event hasn't ended, which in turn prevents the player from
transitioning to the ended state.
This commit detects when the new primary already has the ended tag.
In this case, we call onPrimaryPlaylistRefreshed directly and remove
the unnecessary playlist load.
Issue: #9067
#minor-release
PiperOrigin-RevId: 380680532
The glitches were introduced in:
https://github.com/google/ExoPlayer/commit/6c31e34528
The problem is that Listener.onEvents is called in a later looper iteration
than the listener methods that were previously used. This created a gap on
the main thread between the UI component dispatching a seek operation to the
player, and onEvents being called to update the progress bar's position.
At the start of this gap the progress bar is rendering the new position,
but its position member variable is still set to the old position. If the
progress bar is re-drawn by another message on the main thread within the
gap, it will briefly show the old position until onEvents is called.
There are multiple possible fixes to this, and the best one is probably to
modify ListenerSet to remove the gap. That's high risk though, so for now we
fix the flicker by always updating the progress immediately after the seek
is dispatched, in addition to when onEvents is called.
Issue: #9049
#minor-release
PiperOrigin-RevId: 380678388
Also change to explicitly track the provisioning session, which makes
the code easier to reason about than always using the zero'th element
of the list.
PiperOrigin-RevId: 380181453
Note that this removes a workaround for malformed content, in which the
track_ID is set incorrectly. It's unclear there was sufficient reason to
implement that workaround, and so it's preferable to remove it, rather
than implementing the concept of unrecognized tracks, which would be
needed to keep it and to also fix this issue.
Issue: #9056
#minor-release
PiperOrigin-RevId: 379506261
`SurfaceTexture` provides a transform matrix with each buffer. Previously
gldemo ignored this but it is important to apply it to have the video render
properly.
The transformation matrix from the surface texture includes flipping so this
change removes the hard-coded flipping from `a_texcoord`.
Issue: #8992
#minor-release
PiperOrigin-RevId: 377271389
Add the `needsReconfiguration` API on the `MediaCodecAdapter` interface so that `MediaCodecRenderer` can reconfigure the `MediaCodec` in case a `MediaCodecAdapter` needs to be reconfigured immediately after being obtained from the `MediaCodecAdapter.Factory`.
PiperOrigin-RevId: 376944334
A renderer is disabled (without being reset) in two situations:
* When transitioning into a period that starts with a discontinuity
* When stopping the player with setForegroundMode(true)
Before this change the behaviour of `MediaCodecRenderer` when disabled
(but not reset) depended on whether the content being decoded had an
associated `DrmSession`:
* For content without an associated DRM session the MediaCodec instance
was kept alive.
* For content with an associated DRM session, the MediaCodec instance
was released. This was to prevent the DRM session from staying alive
and continuing to make license refresh network requests while the
player was stopped in 'foreground mode'.
This change removes the second bullet, and keeps MediaCodec instances
alive in both the secure and insecure case. This will result in the
DRM machinery making occasional license refresh network requests (at
a frequency defined by the license policy) while the player is stopped
and in 'foreground mode'. This network usage is considered to be a
'limited resource' as described by the `ExoPlayer#setForegroundMode`
javadoc.
This means that switches between secure content (or between secure and
clear content when `MediaItem.drmConfiguration.sessionForClearTypes`
indicates a secure decoder should be used for clear content) should
keep the same video decoder, thus avoiding the 'black flash' that occurs
on some devices when switching the surface away from a secure decoder.
Issue: #8842
#minor-release
PiperOrigin-RevId: 376825501
This change introduces a third 'state' for `DefaultDrmSessionManager`:
It's been fully released (prepareCount == 0) but at least one of its
sessions is still active.
In this state new acquisitions are rejected (`(pre)acquireSession()`
calls will fail) but the machinery to support the existing sessions
(ExoMediaDrm and MediaDrmHandler) is kept until they're all released.
This change will allow us to remove the TODO in MediaCodecRenderer
that resolves Issue: #8842.
PiperOrigin-RevId: 376193952
Many of the setters are ignored unless others are set - this change:
* Lists these conditions exhaustively.
* Uses more concise language to avoid overshadowing the main details
of what the setter sets.
* Tweaks the language from 'is ignored' to 'shouldn't be called', to
open up the future possibility of throwing an error if these are
called without the 'required' setter also being present (see
Issue: #8957).
#minor-release
PiperOrigin-RevId: 376162385
Authentication sequence in RTSP:
- Server replies "Unauthorized" to our DESCRIBE request, and includes the
necessary information (i.e. realm, digest nonce, etc) in WWW-Authenticate
header
- After `RtspClient` receives the response, we
- Parse the WWW-Authenticate header, stores the auth info. The info is saved
for all further RTSP requests (that all need to carry authorization headers)
- send the second DESCRIBE request with the Authorization header.
#minor-release
PiperOrigin-RevId: 376116302
We need to avoid reading and skipping into preload chunks as they
may need to be discarded. The current code iterates over all chunks,
but this can be simplified by just checking the last chunk knowing
that the preload chunk must always be the last one.
As a result, we avoid calling getFirstSampleIndex on all chunks. This
is a bug since the method is not allowed to be called for chunks
that have been spliced in. This still leaves the smaller issue of
potentially calling this method for spliced-in preload chunks, which
will be solved separately.
Issue: #8937
#minor-release
PiperOrigin-RevId: 375053638
Gradle warns against passing a relative path to `new File(String)`:
https://docs.gradle.org/current/userguide/working_with_files.html#sec:single_file_paths
This change fixes all usages of `exoplayerRoot` to pass it to Gradle's
`Project.file()` first, which returns an absolute `File`.
To reproduce the problem in Issue: #8927:
1. Checkout ExoPlayer git project, to e.g. `~/ExoPlayer/exoplayer-git`
2. Create a new Android Studio project in e.g. `~/AndroidStudioProjects/exoplayer-test`
3. Edit the new project's `settings.gradle` file as described in
https://github.com/google/ExoPlayer/blob/release-v2/README.md
using a relative path for `exoplayerRoot`:
```
gradle.ext.exoplayerRoot = '../../ExoPlayer/exoplayer-git'
```
4. In a shell:
```bash
$ cd ~/AndroidStudioProjects/exoplayer-test/app
$ ../gradlew build
```
(Step 4 is important, it seems running `./gradlew` from the project root
doesn't trigger the relative path problem)
This change fixes the problem, and also works with `exoplayerRoot` as a
`File` or `Path` object. `String`, `File` and `Path` all work with relative or
absolute paths:
```
gradle.ext.exoplayerRoot = '/home/ibaker/ExoPlayer/exoplayer-git'
gradle.ext.exoplayerRoot = '../../ExoPlayer/exoplayer-git'
gradle.ext.exoplayerRoot = new File('/home/ibaker/ExoPlayer/exoplayer-git')
gradle.ext.exoplayerRoot = new File('../../ExoPlayer/exoplayer-git')
gradle.ext.exoplayerRoot = Paths.get('/home/ibaker/ExoPlayer/exoplayer-git')
gradle.ext.exoplayerRoot = Paths.get('../../ExoPlayer/exoplayer-git')
```
Note: The Path versions above require importing `java.nio.file.Paths`
and changing the `apply from:` line in the project's settings.gradle
file to something like:
```
apply from: file(gradle.ext.exoplayerRoot.resolve('core_settings.gradle'))
```
It's assumed that a project wanting to pass a `Path` will make these
changes.
Issue: #8927
PiperOrigin-RevId: 374421627
In Android 12 mutability flags have to be set on PendingIntents. If they are not, and the app targets Android 12, then the app will be crashed by the system.
PiperOrigin-RevId: 373427591
Content after ad groups currently always resumes at the ad break position (unless
overridden by a seek or similar). In some cases, media inserting ads wants to
specify an offset after the ad group at which playback should resume. A common
example is a live stream that inserts an ad and then wants to continue streaming
at the current live edge.
Support this use case by allowing ad groups to specify a content resume offset
and making sure that the content start position after the ad group uses this offset.
PiperOrigin-RevId: 373393807
The player already supports changing durations of periods and ads.
The only thing not yet supported is a change in ad break positions
which changes the duration of clipped content ending in an ad break.
Adding support for this requires updating the end position in
MediaPeriodInfo and changing the clip end position of the respective
ClippingMediaPeriod.
Issue: #5067
PiperOrigin-RevId: 373139724
All `add*Listener` and `add*Output` methods are
deprecated in favor of `addListener`.
As for the class themselves `VideoListener` and
`AudioListener` are not used internaly by ExoPlayer,
`VideoRendererEventListener`
and `AudioRendererEventListener` are use in their
place.
As a result `VideoListener` and `AudioListener`
can be deprecated in favor `Listener`.
On the other hand `TextOutput` and `MedataOutput`
are used both in the player interface and internally in
renderers.
This means that those class can't be deprecated.
There usage in the public interface are indirectly
deprecated as their is no way to use them without
using the deprecated `add*Output`.
Thus it's not an issue that the class themselves are
not deprecated.
#minor-release
PiperOrigin-RevId: 371318268
Imported from GitHub PR https://github.com/google/ExoPlayer/pull/8858
Fix bug in text alignment inheritance where child does not correctly inherit ancestor's setting
@icbaker
Merge 70eb4bceb73b3f07e2f8d545b4fa7961189ac52a into 45616f916b
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/ExoPlayer/pull/8877 from dlafayet:multirowalign-cue d942b50a40525fea5d11b35a33d3bbc512550960
PiperOrigin-RevId: 371306966
Move VideoSize in the common module and have the Player return it.
`Listener` and `AnalyticsListener` `onVideoSizeChanged` are updated
with the old method deprecated.
`VideoRendererEventListener.onVideoSizeChanged` was also migrated to
`VideoSize` but the old method is removed, not deprecated.
This is because:
- apps calling/listening to this method is a rare and niche use-case.
- it would introduce hard to diagnostic issues where if only the caller
or the callee is updated to use the new method, the event will be lost.
This doesn't occur with the other 2 listeners as the caller is always
in ExoPlayer library and was updated to call both the old and new methods.
VideoSize is used everywhere except in `Format` as this would lead to
too much refactoring and backward compatibility breakage for little gain.
#minor-release
PiperOrigin-RevId: 371087419
Add method getAvailableCommands() in Player interface to return
the available commands. Method isCommandAvailable() moved to
BasePlayer since it can be implelented by calling
getAvailableCommands().
PiperOrigin-RevId: 370059328
A subsequent change will make the UI module access
SphericalGLSurfaceView and VideoDecoderGLSurfaceView
using reflection, now we're at the point where we only
need to reflect the constructors.
PiperOrigin-RevId: 369630102
The protected visibility causes problems in Kotlin (Issue: #8830) and
also prevents a subclass of AdaptiveTrackSelection.Factory that isn't
nested inside a subclass of AdaptiveTrackSelection (in both Java and
Kotlin).
#minor-release
PiperOrigin-RevId: 369468841
The original cl has been fixed by not implementing
VideoListener but Player.Listener in
StyledPlayerView.
VideoFrameMetadataListener and CameraMotionListener are still part
of the Player interface as a good way to break the UI dependency
on them has not yet been finalised.
PiperOrigin-RevId: 369417682
This change moves the responsibility of creating, configuring and starting the MediaCodec from the MediaCodecRender to the MediaCodecAdapter.Factory.
This move allows ExoPlayer's client to decide how and when codecs are created and/or reused.
To allow the move, this CL replaces MediaCodecRenderer.ConfigureCodec with MediaCodecRenderer.getCodecConfiguration
PiperOrigin-RevId: 369273887
*** Original commit ***
Move VideoComponent in ExoPlayer
VideoFrameMetadataListener and CameraMotionListener are still part
of the Player interface as a good way to break the UI dependency
on them has not yet been finalised.
***
PiperOrigin-RevId: 369194309
VideoFrameMetadataListener and CameraMotionListener are still part
of the Player interface as a good way to break the UI dependency
on them has not yet been finalised.
PiperOrigin-RevId: 368863829
Other properties of SphericalGLSurfaceView (e.g., setDefaultStereoMode)
are not plumbed through the PlayerView components, and it doesn't scale
to plumb through all properties of all of the SurfaceView types.
Applications can instead do:
```
((SphericalGLSurfaceView) playerView.getVideoSurfaceView())
.setUseSensorRotation(useSensorRotation);
```
PiperOrigin-RevId: 368196537
This brings in another fix for `NullPointerExceptions` within `WebView` callbacks in the IMA SDK, related to companion ads.
Issue: #8447
#minor-release
PiperOrigin-RevId: 367591047
- Take centerControls padding into account to prevent switching to
minimal mode too soon
- Disable clipping to padding to avoid the edges of controls from
being clipped as the view gets smaller
Issue: #8763
PiperOrigin-RevId: 366966298
This ensures BUFFER_FLAG_DECODE_ONLY is set on samples that are
before the playback start position, in the case that the queue
is created after the start position is set.
#minor-release
PiperOrigin-RevId: 366249188
When playing TrueHD streams, it's possible that the first decoded
buffer is empty, and that the channel count and sample rate are
still unknown. To correct for this, defer determining the format
until a buffer that will actually be output from the decoder has
been obtained, and only then query the channel count and sample
rate.
Issue: #8616
#minor-release
PiperOrigin-RevId: 366246245
The exo_controls_background view is supposed to fill its parent,
and so previously used match_parent to do this. However, if the
parent uses wrap_content for its own dimensions, the constraints
being specified become somewhat ambiguous. The parent is supposed
to be sizing itself to wrap its children, and one of the children
is supposed to be sizing itself to match the parent.
Intuitively for this case, you'd hope that the layout logic would
size the parent to wrap its other children, and that the
match_parent child would then fill the parent with its determined
size. That's not what happens, and instead the parent ends up
expanding to occupy all of the space available to it.
This commit sets the exo_controls_background view's dimensions
to be 0dp in the layout, to stop it from influencing the size of
the parent. It's then expanded to fill the parent in code.
Issue: #8726
#minor-release
PiperOrigin-RevId: 364868301
Null was an alias for DEFAULT. Remove this for nullness
safety in the API.
The ExoPlayer implementation still checks for null and
replaces it by DEFAULT, so this is ABI compatible.
PiperOrigin-RevId: 364370017
This change fixes playback of playlists where segments have the
extension and Content-Type of JPEG pictures (although in reality)
they are transport streams. File inferrence before this change will
cause an exception when assuming the inferred file type is one of
the allowed HLS containers.
#minor-release
Issue: #8733
PiperOrigin-RevId: 363641277
This makes HLS playback less liable to become stuck if discontinuity
tags are inserted at different times across media playlists.
Issue: #8700
Issue: #8372
PiperOrigin-RevId: 362903428
According to the spec (section 8.4.2), high numeric values represent low
priorities, so we need to flip this sort.
Issue: #8704
#minor-release
PiperOrigin-RevId: 362558370
`ImaAdsLoader` clears its `AdPlaybackState` when it's released but this could
cause `AdsMediaSource` to look up information in the ad playback state that is
no longer in bounds.
Issue: #8693
#minor-release
PiperOrigin-RevId: 362556286
Adds a new Listener that extends all other listener.
This is part of the component flattening goal.
After components have been flattened in Player,
and clients transitioned, existing listeners will be deprecated.
PiperOrigin-RevId: 362287507
In a period transition we pass the start time of the next period, for
the final period we pass the duration of the period or timeline, if
known.
This means sideloaded subtitles now respect the end point of
ClippingMediaSource and ensures that content subtitles aren't
incorrectly displayed over mid-roll ads.
When transitioning back into the subtitled content the subtitles still
appear slightly before the video transitions, meaning the first subtitle
of the content is shown with the last few frames of the ad. Resolving
this in a way that doesn't break anything else requires a deeper
investigation.
Issue: #5317
Issue: #8456
#minor-release
PiperOrigin-RevId: 361797118
MaskingMediaSource needs to resolve the prepare position set for a MaskingPeriod
while the source was still unprepared to the first actual prepare position.
It currently assumes that the period-window offset and the default position is
zero. This assumption is correct when a PlaceholderTimeline is used, but it
may not be true if the real timeline is already known (e.g. when re-preparing
a live stream after a playback error).
Fix this by using the known timeline at the time of the preparation.
Also:
- Update a test that should have caught this to use lazy re-preparation.
- Change the demo app code to use the recommended way to restart playback
after a BehindLiveWindowException.
Issue: #8675
PiperOrigin-RevId: 361604191
- Avoid having two onPositionDiscontinuity events (seek and transition)
sent after a seek to another media item.
- Avoid triggering an onPositionDiscontinuity event after a timeline
change.
#minor-release
PiperOrigin-RevId: 361092914
Latest LTS version is better than latest stable version because it will
be supported for longer.
#minor-release
Issue:#8581
PiperOrigin-RevId: 359467482
Allow offload of gapless content even if gapless offload is not known to be supported by the device.
This is not exposed in the high level DefaultRendererFactory as most
users are expected to prefer fidelity to power savings.
PiperOrigin-RevId: 359336407
The concept of Renderers is not needed in the
Player interface. Move it to ExoPlayer.
This should not break most users as they use SimpleExoPlayer.
PiperOrigin-RevId: 359220977
- Ensure consistency between (Styled)PlayerControlView,
PlayerNotificationManager, TimelineQueueNavigator and
DefaultControlDispatcher.
- Handle the case where a live stream has ended when enabling previous
and next actions (window.isLive() is true and window.isDynamic is
false in that case)
#minor-release
PiperOrigin-RevId: 359063793
- If DataSource.close fails then it's unknown whether the underlying file was
written to the cache. We should assume that it has not been.
- Always re-query cachedBytes at the start of CacheWriter.cache, since its
current value may be incorrect if a previous failure was the result of a
file not being written to the cache.
PiperOrigin-RevId: 359039109
When we add DRM pre-acquire support to SampleQueue, we'll dispatch
twice the number of acquire and release events. This is slightly
confusing, since there's the same number of
DrmSessionManager#acquireSession() calls.
We can mitigate this by only dispatching each acquire and release
event to at most one EventDispatcher.
This also changes the events fired when playing a stream with both audio
and video encrypted with the same keys (even without pre-acquisition).
Before: The EventDispatcher would see 2 aquires, 1 key load and 2
release events.
After: The EventDispatcher will see 1 acquire, 1 key load and 1 release.
PiperOrigin-RevId: 358804502
This is preferable to just logging to LogCat so that listeners can
report this to analytics systems if required.
Issue: #6384
PiperOrigin-RevId: 357906079
`ImaAdsLoader` will preload the first ad of a subsequent media item, but the
preloaded ad might not actually play because the user could seek to a non-zero
position in that media item (which could trigger playback of a midroll, not the
preroll). In this case, playback would get stuck because the midroll ad
expected to play after the seek would never load, because the IMA SDK expected
the preroll to play first.
Fix this behavior by discarding the preloaded ad break. If there isn't a seek,
the transition to the next media item is still seamless.
#minor-release
PiperOrigin-RevId: 357682510
Previously it was safe to query the first period in the timeline, but
now we support using the ads loader in concatenations we need to use
the current period index instead.
#minor-release
PiperOrigin-RevId: 357578003
The available end time was accidentally substracted by the start time
of the last period.
To avoid similar time reference confusion in the future, also renaming
many variables and methods to clearly reflect the time reference point.
And to avoid constant conversion, the processManifest method also
attempts to converge to time relative to the start of the window as
quickly as possible.
Issue: #8537
PiperOrigin-RevId: 357001624
If keepalive is disabled the existing code over-eagerly releases
DrmSession instances. This is arguably OK since a (Default)DrmSession
should be released before its (Default)Manager is released
(since the underlying MediaDrm instance might be released when the
manager is released). And if all sessions are released before the
manager is released then `sessions` is empty, so the loop is a no-op.
Issue: #8576
#minor-release
PiperOrigin-RevId: 356955308
The `DrmConfiguration.sessionForClearTypes` property is often used
to ensure a secure decoder is used for clear ads played in encrypted
content. This is because some devices show black frames when switching
decoders.
Before this change the DRM config isn't propagated down when
constructing the ad media source, meaning
`DrmSessionManager.DRM_UNSUPPORTED` is always used, which will
cause playback to switch from secure to clear decoder when transitioning
to an ad break (ignoring the MediaItem `sessionForClearTypes` option.
Issue: #8568
#minor-release
PiperOrigin-RevId: 356951124
Without this a new manager is instantiated for every item in a playlist,
meaning the impact of caching improvements to DefaultDrmSessionManager
are reduced (since the cache doesn't persist across playlist items).
With this change, playlists of items with identical DRM config will use
the same manager instance (and thus share existing sessions).
Issue: #8523
#minor-release
PiperOrigin-RevId: 356690852
Also allow the player's prepared ad media period durations array to exceed the
length of the loaded ad URIs array, as it's possible for the player to buffer
an ad media period fully at the point where it's known that an ad is coming up
but its URI is still unknown.
#minor-release
PiperOrigin-RevId: 356249284
Before, the level was set to null in this case.
MediaCodecUtil.getCodecProfileAndLevel() was therefore returning null
and the fallback to AVC/HEVC was not enabled in MediaCodecVideoRenderer.
Issue:#8530
#minor-release
PiperOrigin-RevId: 355574499
* Move cherrypicked changes from dev-v2 to 2.13.0
* Use a bulleted list instead of comma-separated.
* Standardise everything into present, imperative sentences.
* Remove a couple of mixed-font words (I left cases with a separating
apostrophe, as these seemed visually clearer).
* Merge multiple issue links into a single set of parentheses.
#minor-release
PiperOrigin-RevId: 355180143
Without this no error is currently logged or propagated to EventLogger.
The propagation doesn't happen because
MergingMediaSource.ForwardingEventListener only propagates events
originating from the "main" source in the merge:
<unknown commit>
#minor-release
PiperOrigin-RevId: 354902467
- Fix comparison between a byte and 0xFF to avoid conversion of 0xFF to
byte and to int again (due to numeric promotion).
- Fix addition of int and byte with most significant bit set. The byte
was incorrectly promoted to an int negative value.
Issue:#8496
#minor-release
PiperOrigin-RevId: 353865751
`TrackSelection` had mutation methods which were to be called only
internally by ExoPlayer components but were exposed in the
public `Player` interface.
The mutation methods have been moved out of `TrackSelection`
to a new class `ExoTrackSelection`.
Current track related read-only method have also been moved out,
because they are actually something quite unclear.
Even for a single item playlist, it's the track being buffered rather
than the track being played, which is unclear.
But when you have a playlist it starts to get really confusing,
because if the next item is being buffered, then it's actually
the last track to be buffered in the currently playing item.
As a final aside, the implementations don't do proper thread synchronization
to ensure visibility of updated state by the calling thread.
Exposing those mutable methods in the public `Player` interface
was problematic because they leaking internal concepts of `ExoPlayer`.
This is also required to minimize the `Player` interface for long term
stability.
`ExoTrackSelection` is a subclass of `TrackSelection`.
This is not ideal as an `TrackSelection` implementation could
break the current immutability.
This was done in order for this refactor to be simpler.
A future patch will fully split the two classes.
All `MediaPeriod` and `Sources` had to be updated to use the new
`TrackSelection` dynamic aspect class name.
An alternative would have been to break ExoPlayer's public API, keeping
`TrackSelection` as the dynamic aspect name, and calling the public static
aspect class `TrackSelectionState` or similar.
Nevertheless, while it would have impacted less files, it would have
many more small apps and casual users of ExoPlayer.
#player-to-common
PiperOrigin-RevId: 353637924
`ImaAdsLoader` only loads ad media URLs once playback of the preceding ad (if
any) has started, and this behavior is likely to be similar for other ad loader
implementations due to limits on how long before an ad plays it is meant to be
loaded. This is problematic for very short ads followed by an ad because the ad
will load to the end but load control may not allow playback to start due to
the total buffered duration being low.
Fix this by allowing playback to start regardless of load control if we are
waiting for an ad media period to prepare.
An alternative fix would be to fake the ad progress in the `ImaAdsLoader` to
trigger loading the next ad, but this would only allow one ad to load ahead (so
the problem would remain for two short ads in a row followed by another ad).
Issue: #8492
PiperOrigin-RevId: 353600088
This ensures the message devilery is governed by the clock.
Also replace setting a Handler with a Looper to facilititate this
change.
PiperOrigin-RevId: 353019729
The IMA SDK currently notifies `CONTENT_RESUME_REQUESTED` then
`CONTENT_PAUSE_REQUESTED` quickly afterwards when playing an ad for an initial
seek. This triggered the logic to skip VPAID ads added for Issue: #7832,
causing the ad to be skipped.
This change reverts the fix for that issue and extends the ad preload timeout
logic to cover the case of an initial seek as well. Incompatible VPAID ads will
still be skipped but only after the preload delay (this seems fine given that
they are documented not to be supported, and we are just making the failure
mode less bad on a best-effort basis!).
Issue: #8428
Issue: #7832
PiperOrigin-RevId: 353011270
This prevents trying to post the response to possibly dead threads,
which causes an IllegalStateException to be logged.
Issue: #8328
PiperOrigin-RevId: 352388155
- Once the ability to add debug listeners is removed, analyticsCollector
is the only component that needs to receive the events. Hence it is
called directly.
- It seemed less confusing to do the same thing for (non-debug) video and
audio events, and to have AnalyticsCollector no longer implement
VideoListener and AudioListener directly. This clears up confusion that
arises as a result of the debug and non-debug interfaces defining the
same methods in some cases, and having to be careful not to end up
calling the corresponding AnalyticsCollector method twice.
PiperOrigin-RevId: 351835491
The VideoDecoderOutputBufferRenderer will be set
automatically when setVideoSurfaceView is called on a
VideoDecoderGLSurfaceView.
#player-to-common
PiperOrigin-RevId: 351742601
- SimpleExoPlayer now always generates a session ID at
construction time. This ID is used indefinitely, including
for tunneling, unless a call to setAudioSessionId is made
to change it.
- DefaultTrackSelector support for enabling tunneling has
been changed to a boolean, since tunneling now uses the
same session ID as non-tunneled mode.
- Since the session ID is now always set at the top level,
internal propagation of generated session IDs is no longer
necessary, and so is removed.
PiperOrigin-RevId: 351349687
Catching OOM errors is bad practise unless there is a specific known
cause that tried to allocate a large amount of memory. Without this
known cause with a large allocation, the source of the error is
likely somewhere else in the app and every random small further
allocation may lead to additional OOM errors (for example b/145134199).
We have three known causes in ExoPlayer:
1. Source allocations based on unexpected values in streams. This is
caught on the loader thread and reported as an
UnexpectedLoaderException.
2. Output buffer allocations by non-MediaCodec decoders. These are
caught in SimpleDecoder on the decoder thread and reported as
UnexpectedDecodeException.
3. Input buffer allocations by non-MediaCodc decoders in their
constructors. These are currently caught on a higher-level and
reported as ExoPlaybackException.TYPE_OUT_OF_MEMORY.
For consistency and to prevent catching OOM errors without known cause
we can remove the generic TYPE_OUT_OF_MEMORY and catch the specific
exception where it occurs to report it as an
ExoPlaybackException.TYPE_RENDERER. This also has the added advantage
that the format metadata is added to the exception.
PiperOrigin-RevId: 351326688
*** Original commit ***
Rollback of ff8c8645ab
*** Original commit ***
Merge #8401: Initialize Format.codecs from HEVC SPS NAL unit (#8393)
Imported from GitHub PR https://github.com/google/ExoPlayer/pull/8401
This will allow ExoPlayer to check if video track's profile and level are supported by decoder when playing progressive media so...
***
PiperOrigin-RevId: 351139861
- Support setting the user-agent in CronetDataSource
- Support setting the default user-agent in CronetEngineWrapper
- Use the underlying network stack's default user-agent by
default. Many applications will configure the underlying
CronetEngine or OkHttpClient with a user-agent that they
expect to be used throughout their app, so always overriding
this with our own default, on reflection, is not the best
thing to do!
Issue: #8395
PiperOrigin-RevId: 350921963
*** Original commit ***
Merge #8401: Initialize Format.codecs from HEVC SPS NAL unit (#8393)
Imported from GitHub PR https://github.com/google/ExoPlayer/pull/8401
This will allow ExoPlayer to check if video track's profile and level are supported by decoder when playing progressive media sources.
Merge e582fb91b73c7c95e754167140211d5473c36d14 into 1347d572ef
Issue: #8393
***
PiperOrigin-RevId: 350871621
I think this was missed when integrating DefaultMediaSourceFactory with
SingleSampleMediaSource.Factory in
315ba6f324
Issue: #8430
#minor-release
PiperOrigin-RevId: 350759580
Imported from GitHub PR https://github.com/google/ExoPlayer/pull/8401
This will allow ExoPlayer to check if video track's profile and level are supported by decoder when playing progressive media sources.
Merge e582fb91b73c7c95e754167140211d5473c36d14 into 1347d572ef
Issue: #8393
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/ExoPlayer/pull/8401 from equeim:hevc-codecs e582fb91b73c7c95e754167140211d5473c36d14
PiperOrigin-RevId: 350738065
This requires the parent of the background to draw and have padding large enough to support the size of the ripple.
The bottom buttons must remained bordered as the space around them is constrained.
PiperOrigin-RevId: 350590722
Without this feature it's impossible to nicely merge multiple sources
with different durations if these durations are not known exactly
before the start of playback.
Issue: #8422
PiperOrigin-RevId: 350567625
This allows to set preferences based on MIME type for video and audio.
The MIME type preference is applied after other explicit preferences
and restrictions (e.g. language or max resolution), but before implicit
preferences like bitrate.
Issue: #8320
PiperOrigin-RevId: 350550543
The experimental setting shows positive results and can be turned
on by default. To avoid adaptation between HLS audio formats without
bitrates, we need to ensure that only formats with bitrates are
considered for adaptation.
Also added tests for these features.
Issue: #5111
PiperOrigin-RevId: 350315296
- Re-layer layout so that the central controls end up on
top (and, more importantly, have preference for receiving
touch input) if the view is so small that elements start
to overlap. This requires splitting the background and
the controls themselves.
- Fix bug that could cause the scrubber to not be hidden
in minimal mode, if the mode is entered when the controls
are not visible.
- Fix positioning of minimal controls.
- Remove scrubber padding in minimal mode, since the scrubber
- Remove unused bar_gravity value.
PiperOrigin-RevId: 347008789
This was reported for SSA/ASS in PR #8265, but it seems to me the
SubRip part of the Matroska spec is similarly loose, so this change
handles null-terminated strings in both.
#minor-release
PiperOrigin-RevId: 345452667
Previously `MediaPeriodQueue` would return null if an ad media URI hadn't
loaded yet, but this meant that the player could be stuck in `STATE_READY` if
an `AdsLoader` unexpectedly didn't provide an ad URI. Fix this behavior by
masking ad media periods. `MaskingMediaPeriod` no longer requires a
`MediaSource` to instantiate it.
This also fixes a specific case where playback gets stuck when using the IMA
extension with an empty ad where the IMA SDK unexpectedly doesn't notify the ad
group fetch error.
Issue: #8205
PiperOrigin-RevId: 344984824
The ref'd issue was marked as a doucmentation candidate, but I think
the confusion likely arises from the lack of "next" and "previous" in
the method names. Our other UI components also support enabling each
button individually, so this also brings notifications in line with
those.
Issue: #6491
#exofixit
PiperOrigin-RevId: 344058969
- Remove restriction on `AdsMediaSource`s in playlists in `ExoPlayerImpl`.
- Allow playing playlists of `AdsMediaSource`s in the demo app.
- Add a sample with ads in a playlist in the demo app.
Issue: #3750
PiperOrigin-RevId: 344018774
*** Original commit ***
Update Styled non bottom buttons to be borderless.
This requires the parent of the background to draw and have padding large enough to support the size of the ripple.
The bottom buttons must remained bordered as the space around them is constrained.
***
PiperOrigin-RevId: 343531411
RunnableFutureTask is not reusable. Trying to reuse it meant that a
failure in one doWork() call would cause subsequent download() calls
to (a) not block until the runnable has finished executing (does not
apply when using a direct executor), and (b) throw the same failure
as thrown from the first doWork() call.
This could cause #8078 if the initial failure occurred before the
content length was resolved. Retries are not blocked on their work
completing due to (a), and the download would be marked as failed due
to (b). The work itself could then resolve the content length, which
causes the stack trace in this issue.
Issue: #8078
PiperOrigin-RevId: 343498252
This callback allows listeners to know when all simultanous changes
have been handled and the values reported through callbacks are
again completely consistent with value obtained from Player
getter calls.
PiperOrigin-RevId: 343476639
Background:
1. When the player has multiple audio renderers, by default they share a
single AudioSink.
2. When any new renderer is enabled, all disabled renderers are reset
prior to the new renderer being enabled. This is to give them a chance
to free up resources in case the renderer being enabled needs them. These
reset calls are expected to be no-ops for renderers that have never been
enabled.
The issue:
The problematic case arises when there are two audio renderers and a third
renderer (e.g., text) is being enabled. In this case, the disabled audio
renderer's reset call ends up resetting the AudioSink that's shared with the
enabled audio renderer. The enabled audio renderer is then unable to make
progress, causing playback to freeze.
This is a minimal fix that directly prevents the mentioned issue. There are
multiple follow-ups that would probably make sense:
1. Having ExoPlayerImplInternal track which renderers need to be reset, and
only resetting those renderers rather than all that are disabled. This
seems like a good thing to do regardless, rather than relying on those
calls being no-ops.
2. If we want to continue sharing AudioSink, we need to formalize this much
better and make sure we have good test coverage. Messages like
MSG_SET_VOLUME are also delivered to the AudioSink multiple times via
each of the renderers, which works currently because DefaultAudioSink
no-ops all but the first call in each case. This is pretty fragile though!
Issue: #8203
#minor-release
PiperOrigin-RevId: 343296081
This requires the parent of the background to draw and have padding large enough to support the size of the ripple.
The bottom buttons must remained bordered as the space around them is constrained.
PiperOrigin-RevId: 342162231
This information is already available in the MappingTrackSelector,
but not currently forwarded to the TrackSelection.Factory.
This makes it more complicated (or impossible) to depend on period
or manifest information in the track selection (for example to only
select tracks which are cached for the current format).
PiperOrigin-RevId: 340605886
1. Move logic to decide to re-initialize the codec rather than using
MediaCodec.setMediaDrmSession if (a) PlayReady is in use, and (b)
the new session is still provisioning. This would previously have
happened asynchronously after an input format change, after the
decoder has subsequently been flushed. After this change the logic
executes synchronously when the input format changes. This helps
with the ref'd bug, since we want to propagate reasons for codec
re-initialization through inputFormatChanged events.
2. Whilst moving the logic for re-initialization if PlayReady is
being used, I fixed a bug that would occur when switching from
[PlayReady --> non-PlayReady]. Re-use doesn't work in this case.
The old logic only checked for the [Something --> PlayReady] case.
3. Remove pointless codec flush if updating the DRM session having
not queued anything to the codec.
PiperOrigin-RevId: 340299790
ImaAdsLoader notified onEnded whenever an ad finished playing, but when an ad
is skipped in an ad pod we'd receive a playAd call before the player
discontinuity for skipping to the next ad. Fix this behavior by checking that
IMA's playing ad matches the player's playing ad before notifying onEnded.
#minor-release
PiperOrigin-RevId: 339424910
This was causing issues old devices where the class
inheriting StreamEventCallback was loaded even though
it was not used.
Instead use an anonymous class that seem to be loaded
more lazily.
PiperOrigin-RevId: 337252687
The 'implementation' dependency causes problems when resolving
ListenableFuture in contexts that also include the
com.google.guava:listenablefuture:1.0 dependency.
Issue: #7905
Issue: #7997
Issue: #7993
PiperOrigin-RevId: 337093024
1. The first time the player controls are are made visible,
there is no animation.
2. The first time the player controls are made visible, the
"select tracks" button isn't displayed. When tapping to
subsequently hide the player controls, the button briefly
becomes visible and then is hidden again. This bug is due
to state in StyledPlayerControlViewLayoutManager being
out of sync, resulting in StyledPlayerControlView's
onVisibilityChange not being called properly.
After this change both of these issues should be resolved.
PiperOrigin-RevId: 336704031
Adjusted the bottom layout of StyledPlayerControlView :
- Enlarged bottom button's height to make tapping easier.
- Extended greyed background area to upper edge of seekbar.
- Gave padding between bottom edge of the overall layout and bottom buttons.
- Reduced horizontal margins between bottom buttons.
PiperOrigin-RevId: 336041160
Previously, the overflow button was always shown at the bottom in StyledPlayerControlView
and hided the settings cog even when there is enough space.
With this change, the settings cog moves out from overflow and
the overflow button is shown only when the buttom space is not enough.
PiperOrigin-RevId: 336029179
Experiments showed the timeout is beneficial to avoid ANRs and
we can thus enable the feature by default.
Also add configuration to set the timeout if required.
Issue: #5887
PiperOrigin-RevId: 335652506
Using a timeout prevents ANRs in cases where the underlying platform
gets blocked forever, so we enable this feature by default.
Issue: #4352
PiperOrigin-RevId: 335642485
This is in preparation for supporting playlists of ads media sources using
ImaAdsLoader.
Existing ways of passing ad tags should still function but are deprecated (and
won't be supported with playlists).
Issue: #3750
PiperOrigin-RevId: 335618364
`subtitle` is only guaranteed to be non-null if
`nextSubtitleEventIndex != C.INDEX_UNSET`. The null check added in
0efec5f6c1
was too early.
Issue: #8017
PiperOrigin-RevId: 334777742
This was broken by 74a9d8f680
because DashManifestParser switched to setting Format.sampleMimeType to
text/vtt while SubtitleDecoderFactory was still expecting
application/x-mp4-vtt. This change teaches SubtitleDecoderFactory to
check both Format.containerMimeType and Format.sampleMimeType.
I'll investigate a follow-up change to remove
MimeTypes.APPLICATION_MP4VTT completely (it's currently still used in
AtomParsers).
Issue: #7985
PiperOrigin-RevId: 334771672
When I moved ParsableByteArray#data behind a getter I replaced some
assignments with calls to reset(byte[]):
ce2e6e2fd6
reset(byte[]) deliberately sets `limit` to `data.length`, in order to
handle cases that were reassigning `data` but not updating `limit`.
However OggPacket was already using `limit` to track where to write
'new' data into the array, so changing `limit` to `data.length` caused
us to try and write new data beyond the end of the array.
I looked at other uses of reset(byte[]) in ce2e6e2fd6
and condluded the only other usage in MatroskaExtractor is legit and
shouldn't be updated like this (because MatroskaExtractor previously
*wasn't* correctly updating/maintaining `limit`).
Issue: #7992
PiperOrigin-RevId: 334601586
Non-realtime AudioTrack playback speed was not taken into account when
extrapolating the old mode's position, causing the position not to
advance smoothly.
This should be a no-op when not using AudioTrack playback params for
speed adjustment.
Issue: #7982
PiperOrigin-RevId: 334151163
On receiving a fetch error for an ad that would otherwise play based on an
initial/seek position, the pending content position wasn't cleared which meant
that position reporting was broken after a fetch error. Fix this by always
clearing the pending position (if there was a pending position that will have
triggered the fetch error).
Also deduplicate the code for handling empty ad groups (fetch errors)
and ad group load errors.
Issue: #7956
PiperOrigin-RevId: 334113131
The shrinking didn't mention that users of the existing
ProgressiveMediaSource need to pass in ExtractorsFactory.EMPTY to the
SimpleExoPlayer.Builder as well.
Also updated the release notes to mention the changed shrinking
guidance.
Issue: #7937
PiperOrigin-RevId: 333060452
We have a workaround for uneven sample stream durarions in playlists that
assumes a renderer allows playback if it's reading ahead or waiting for
the next stream.
652c2f9c18 changed this logic to no longer require to
wait until the next stream is prepared due to a change in how we advance
media periods in the queue. However, the code falsely still requires the
next stream to exist (even if it's not prepared). This can cause a stuck
buffering state when the difference in the duration of the streams is more
than what we buffer ahead because we never create the next stream in such
a case.
Note: DefaultMediaClock.shouldUseStandaloneClock has roughly the same logic
and also doesn't require the next stream to be present.
Also fix a test that seemed to rely on this stuck buffering case to test
stuck buffering detection. Changed the test to not read the end of stream
to ensure it runs into the desired stuck buffering case.
Issue:#7943
PiperOrigin-RevId: 333050285
I didn't copy-paste the whole of
https://github.com/google/guava/wiki/UsingProGuardWithGuava because
this line seems relevant based on our current usage.
Lots of that file seems to relate to classes that are strongly
discouraged on Android:
https://github.com/google/guava/wiki/Android#specifics
I've only added this to the `common` module, since everyone that uses
ExoPlayer must depend on that. This avoids duplicating this line into
every module that has a Guava dependency.
Also remove some other warning suppressions that are defined in both
`core` and `common`.
Issue: #7904
PiperOrigin-RevId: 332203086
- Remove SampleQueue changes (they're being picked up in 2.12, but
are sufficiently minor to not warrant a release note)
- Update 2.12 estimated release date
PiperOrigin-RevId: 330409443
Currently the audio renderer can become ready before the AudioTrack
actually has enough data to play something, which means that the
player may transition to the ready state before audio starts
playing. This makes the player's current state transition not very
useful for detecting when audio actually starts playing.
This change adds a new event to notify apps when the audio position
is increasing after a pause or seek/flush/reset event, and includes
an estimate of the system time at which audio playout started.
Issue: #7577
PiperOrigin-RevId: 327810040
AudioTrack.setPlaybackParams can be used to adjust playback speed.
This is preferable to application-level speed adjustment (currently
implemented in ExoPlayer) from API 23 because the speed change
occurs in the mixer, which means that the audio track buffer doesn't
need to drain out before the speed adjustment takes effect.
Issue: #7502
PiperOrigin-RevId: 326392301
Find sbgp and sgpd boxes with grouping_type == seig in the case they don't
come first. Previoulsy we would only find them if they came first.
Issue: Issue: #7716
PiperOrigin-RevId: 325407819
The working of libOpus is different from ffmpeg. With ffmpeg, the decoder can
be configured to output floating point PCM. While in libOpus, floating samples
are acquired by calling a different function. This is the reason the new JNI
functions and the logic in OpusDecoder/LibopusAudioRenderer is added to
support float output.
PiperOrigin-RevId: 324661603
This callback was not notified before, which could theoretically lead to ad
loading timing out. In practice it doesn't currently happen because the timeout
appears to start when the ad cue point is reached, not when loadAd is called.
We notify onLoaded when the ad media period is prepared (for HTML5 the
recommendation is to notify on the HTMLMediaElement 'canplay' event, which this
roughly corresponds to).
PiperOrigin-RevId: 324568407
Issue: #7244 added this feature to HLS. This change is the exact copy
in ChunkSampleStream to add the same support to the other adaptive
formats.
Note that ChunkSampleStream doesn't support slicing, so we can't cancel
a read-from chunk, and we need to prevent reading into an already
canceled chunk load so that the chunk can be automatically discarded
after the cancelation.
Issue: #2848
PiperOrigin-RevId: 324179972
*** Original commit ***
Pass startPositionUs into Renderer.replaceStream
Plumb this down into BaseRenderer.onStreamChanged and use it when
deciding whether to render the first frame of a new period.
***
PiperOrigin-RevId: 323447253
These callbacks were only necessary to track the queue in AnalyticsCollector and there is no other known benefit of having them.
PiperOrigin-RevId: 322535274
- Removed corresponding playback examples in the resouce JSON files.
- Removed the spherical style declaration.
- Removed spherical stereo mode related Intent settings, and
- Removed code to play back media in spherical stereo mode
BUG=160460714
(grafted from 595fe17a480d5bc64d0198130150d8e8a5daa679)
PiperOrigin-RevId: 322206314
Plumb this down into BaseRenderer.onStreamChanged and use it when
deciding whether to render the first frame of a new period.
PiperOrigin-RevId: 321175627
AdDisplayContainer now takes the video ad player at construction time,
and obstructions are registered/unregistered via a new method. Also
'content complete' is now notified via ad callbacks rather than the
AdsLoader.
PiperOrigin-RevId: 320567666
The wait time parameter is an implementation detail where we can just
provide a default.
In addition, we should also force the evaluation when the last chunk
in the queue changed to ensure it is always evaluated before starting
to load a new chunk.
Issue: #7582
PiperOrigin-RevId: 319949251
Clearing the exception puts the SimpleDecoder into a silent failure
state - the decoder thread is dead (because decode() has returned
false) but it's still possible to queue buffers to the decoder (they
just never get decoded). This partially reverts
4107375c9d
Also always recreate the decoder when handling an error in TextRenderer
This ensures we can try and decode a later subtitle sample after
encountering a decode error. This behaviour is what nulling out the
exception in SimpleDecoder.flush() was trying to achieve. We need to
ensure we don't start passing data to the new decoder until we've
hit the next key frame, so we throw away any non-keyframe samples
inside TextRenderer#render().
Issue: #7590
PiperOrigin-RevId: 319785908
We don't need the renderer immediately after stopping, so the
renderer should not throw a checked exception until it's used again.
This is inline with the not throwing from disable().
Also, none of the known implementation throw an exception at the moment
and all reasonable base classes omit the throws clause already.
PiperOrigin-RevId: 319503643
Issue: #7011
Issue: #6725
Issue: #7066
This also mitigates (but doesn't fix) Issue: #4133 because it
prevents a second key load after a short clear section.
PiperOrigin-RevId: 319184325
- Deprecate constructors that don't take an executor, to direct
developers toward the new ones. Callers can trivially pass
Runnable::run to one of the new ones if they want old behaviour.
- Add comment explaining warning suppression added in the CL that
added parallelised download support.
Issue: #5978
PiperOrigin-RevId: 318803296
On reaching the end of the content we would notify content complete
and skip unplayed ads, causing a timeline change. That timeline change
was handled in a way that caused a further timeline change in the
2.11.6 release, where we don't yet deduplicate no-op Timeline changes,
causing repeated timeline changes indefinitely.
At tip-of-tree, the timeline wouldn't refresh repeatedly. However the
code for sending content complete at the point of transitioning to
play a preloaded postroll ad was not correct in that it didn't mark
previous ads as skipped. Instead they happened to be marked as
skipped later on due to the timeline change handling content
completion code triggering again.
Fix this by only marking ads as skipped when content completes once,
to avoid the duplicate timeline change, and moving the skipped ad
marking so it happens in the same place as notifying content complete.
PiperOrigin-RevId: 318454908
*** Reason for rollforward ***
Rollforward after making sure the handler is created,
and that a test is written preventing a
similar regression.
*** Original change description ***
Rollback of b6f5a263f7
*** Original commit ***
Rollforward of commit 5612ac50a3.
*** Reason for rollforward ***
Rollforward after making sure the handler is created
from the playback thread and not from an app thread.
*** Original change description ***
Rollback of e1beb1d194
*** Original commit ***
PiperOrigin-RevId: 318274400
Numerical lines conceptually map to a grid of lines in the viewport,
with the Cue text lines being aligned to one of the viewport lines.
It doesn't make sense to position a single-line cue differently based
on lineAnchor when it's expected to 'snap' to a particular line on the
viewport grid. So we redefine the position to be in terms of the cue
lines rather than the bounds of the cue box.
It's also not possible to always handle ANCHOR_TYPE_MIDDLE when
lineType=NUMBER (as it relies on the number of lines in the cue being
odd), so it's easier to ignore lineAnchor completely.
PiperOrigin-RevId: 318034664
The IMA SDK now preloads postrolls which is great as we no longer need
to rely on detecting buffering at the end of the stream to trigger
playing postrolls.
Add in the required logic to detect the period transition to playing
the postroll.
Issue: #7518
PiperOrigin-RevId: 317610682
We currently get float ad cue points from IMA, but store these as
longs in microseconds. The cast from double to long would take the
floor of the value, which could lead to stored ad cue points being
off-by-one. Use Math.round to avoid this.
ImaAdsLoader also has code to map a double AdPodInfo position (which
should match a cue point) onto the corresponding ad group index by
searching the long ad cue points. Match the calculation used where we
map float cue points, including narrowing the position to a float
first to avoid regressions if IMA SDK behavior changes to represent
positions in more than float precision later, and also remove the
requirement that the ad positions match exactly as a defensive
measure.
PiperOrigin-RevId: 317607017
*** Original commit ***
Rollforward of commit 5612ac50a3.
*** Reason for rollforward ***
Rollforward after making sure the handler is created
from the playback thread and not from an app thread.
*** Original change description ***
Rollback of e1beb1d194
*** Original commit ***
Expose experimental offload scheduling
Add a new scheduling mode that stops ExoPlayer main loop
when the audio offload buffer is full and resume it...
***
PiperOrigin-RevId: 316914147
*** Reason for rollforward ***
Rollforward after making sure the handler is created
from the playback thread and not from an app thread.
*** Original change description ***
Rollback of e1beb1d194
*** Original commit ***
Expose experimental offload scheduling
Add a new scheduling mode that stops ExoPlayer main loop
when the audio offload buffer is full and resume it when
it has been partially played.
This mode needs to be enabled and dissabled manually by the app
for now.
#exo-offload
***
***
PiperOrigin-RevId: 316898804
After an ad pod coming up has preloaded, if the user seeks before it
plays we get pauseAd/stopAd called for that ad pod. Also, the ad will
not load again. Work around this unexpected behavior by handling
pauseAd/stopAd and discarding the ad.
In future, it's likely that the IMA SDK will stop calling those
methods, and will loadAd again for the preloaded ad that was
unexpectedly discarded. This change should be compatible with that,
because the ad won't be discarded any more due to not calling stopAd.
Issue: #7492
PiperOrigin-RevId: 316873699
Ads can appear due to asynchronous ad tag requests completing after
earlier ads in a pod have loaded, so remove the requirement that the
ad count can't change. The MediaPeriodQueue should handling discarding
buffered content if an ad appears before already buffered content, so
I think this case is actually handled correctly by the core player
already.
Also remove the requirement that an ad URI can't change. This is a
defensive measure for now, but it's likely that a later fix in the IMA
SDK for an issue where loadAd is not called after preloading then
seeking before a preloaded ad plays will result in loadAd being called
more than once, and I think it's possible that the second call to
loadAd may have a different URI. Because the ad URI should only change
after an intermediate seek to another MediaPeriod, there shouldn't be
any problems with buffered data not getting discarded.
Issue: #7477
PiperOrigin-RevId: 316871371
The release() method was added in the recent IMA API changes for
preloading and now 'collides' with the ExoPlayer AdsLoader release
method. This led to all ads completing being treated as a call to
completely release the ads loader, which meant that the ad playback
state was not updated on resuming after all ads had completed, which
in turn led to playback getting stuck buffering on returning from the
background after all ads played.
Move the IMA callbacks into an inner class to avoid this.
Issue: #7508
PiperOrigin-RevId: 316834561
We haven't seen it used anywhere in practice. It's a niche feature not
supported by any other extractors, and is one of the very few things
stopping us from simplifying MediaSource implementations to not set the
decodeOnly sample flag. This is a simplification that we want to make,
since the current mechanism doesn't work properly for cases where a
downstream decoder adjusts the buffer presentation timestamps so that
they're different on the output side than on the input side.
PiperOrigin-RevId: 316712302
Some but not all VideoAdPlayer callbacks from the IMA SDK included
defensive handling of unexpected cases. Add the remaining ones.
Issue: #7492
PiperOrigin-RevId: 316082651
*** Original commit ***
Expose experimental offload scheduling
Add a new scheduling mode that stops ExoPlayer main loop
when the audio offload buffer is full and resume it when
it has been partially played.
This mode needs to be enabled and dissabled manually by the app
for now.
#exo-offload
***
PiperOrigin-RevId: 315948869
Add a new scheduling mode that stops ExoPlayer main loop
when the audio offload buffer is full and resume it when
it has been partially played.
This mode needs to be enabled and dissabled manually by the app
for now.
#exo-offload
PiperOrigin-RevId: 315860373
The option to cancel ongoing loads as part of the queue size evalation
was added recently. This split out the decision to a new method so that
a TrackSelection implementation can independently cancel loads and
discard upstream data. It also clarifies that evaluateQueueSize will
only be called if there is no ongoing load.
Issue: #2848
PiperOrigin-RevId: 315659735
ANSI/CTA-608-E R-2014 Annex B.5 says:
"The concept of a movable base row for a roll-up caption is new."
It means "new" compared to TC1 and TC2 (released in or before 1985).
Issue: #7475
PiperOrigin-RevId: 315258859
Output timestamps are calculated by the codec based on the buffers,
which is offset in Codec2. This adjusts the input timestamps as they
are passed in so they will match the output timestamps produced by
the MediaCodec.
PiperOrigin-RevId: 314963830
bear_vorbis_gap.ogg is a copy of bear_vorbis.ogg with 10 garbage bytes
(DE AD BE EF DE AD BE EF DE AD) inserted before the second capture
pattern and 3 garbage bytes inserted at the end (DE AD BE).
Issue: #7230
PiperOrigin-RevId: 314715729
Previously if the AudioCapabilities reported that an encoding/channel count was
supported, DefaultAudioSink could try to play it via passthrough. However,
DefaultAudioSink does not support passthrough of every possible format (for
example, it's likely that AAC passthrough does not work given it's never been
tested and recent GitHub issues indicate that trying to use it leads to no
audio being played).
Add additional checks to make sure the encoding is in the list of encodings that
are known to work with passthrough in DefaultAudioSink.
issue:#7404
PiperOrigin-RevId: 312651358
Guava is heavily optimized for Android and the impact on binary size
is minimal (and outweighed by the organic growth of the ExoPlayer
library).
This change also replaces Util.toArray() with Guava's Ints.toArray()
in order to introduce a Guava usage into a range of modules.
PiperOrigin-RevId: 312449093
EventTime contains information about when an event happened and where
it belongs to. Both places can be fully described using timeline, window
index, media period id and position.
Right now, only the information for where the event belongs to is fully
contained in EventTime, whereas the time when the event happened only has
the position, and none of the other information (timeline, window, period).
This change adds the missing information, so that the EventTime can easily
be used without having access to the Player. This also ensures Event
metadata is self-contained and can be stored and reused later.
issue:#7332
PiperOrigin-RevId: 311727004
ANSI/CTA-608-E R-2014 spec defines exactly 32 columns on the screen,
and limits all lines to this length.
See 3.2.2 definition of 'Column'.
issue:#7341
PiperOrigin-RevId: 311549881
Some player setup steps that are likely to be only done once
should be moved into the Builder so that player setup can use
a consistent style (builder vs setters).
This also prevents some threading warning issues when the player
is built on a background thread (e.g. for dependency injection
frameworks) and setters can't be used due to threading restrictions.
PiperOrigin-RevId: 311487224
Users of addTextOutput should instead query the current cues if they
need them. This is more consistent with how other listeners are handled.
PiperOrigin-RevId: 310112241
Now that MediaCodec is not use in passthrough, no
MediaCodec should be created in this mode.
Additionally, do not instantiate a MediaCodec in passthrough
#exo-offload
PiperOrigin-RevId: 309916131
We keep an index hint for the next pending player message. This hint
wasn't updated correctly when messages are removed due to a timeline
update.
This change makes sure to only use the hint locally in one method so
that it doesn't need to be updated anywhere else and also adds the "hint"
suffix to the variable name to make it clearer that it's just a hint and
there are no guarantees this index actually exists anymore.
issue:#7278
PiperOrigin-RevId: 309217614
Steps 4-10 of https://www.w3.org/TR/webvtt1/#cue-computed-line
This part is harder to fit into our code structure because it depends on
how many cues are simultaneously visible - so it has to go in
WebvttSubtitle not WebvttCueParser (which only deals with individual
cues in isolation).
This removes the `isNormal()` method that was trying to approximate
the correct behaviour.
PiperOrigin-RevId: 309021686
Android scheduler has performance issues when a device has a
combiation of big/medium/little cores. Add a heuristic to set the
default number of threads used for deocding to the number of
"performance" (i.e. big) cores.
PiperOrigin-RevId: 308683989
The MediaSessionConnector gets a Bundle passed to the MediaSession.Callback
from the framework which can be null. This needs to be properly annotated
with @Nullable.
Issue: #7234
PiperOrigin-RevId: 307822764
Something that helps a constructor always seemed a bit strange.
It's now possible to use CacheDataSource.Factory directly instead.
PiperOrigin-RevId: 307661930
Create a Builder that creates SimpleExoPlayer instances with fake
components, suitable for testing.
Basically extracts the Builder from ExoPlayerTestRunner to a standalone
class that can be re-used.
PiperOrigin-RevId: 305458419
If we're in the ducked state and updateAudioFocus is called with a
new state for which focus is no longer required, we should restore
the player back to full volume.
Issue: #7182
PiperOrigin-RevId: 305232155
This avoids cases where audio focus is never successfully acquired
because another app is holding on to transient audio focus indefinitely.
Issue: #7182
PiperOrigin-RevId: 305108528
When ClippingMediaPeriod first tried to read a buffer, if its end
position was before the end of the stream and it was buffered to its end
position, it would sometimes erroneously signal end-of-stream for
protected content because the sample queue might be waiting for DRM keys
at this point.
Work around the issue temporarily by signaling this specific case back
to ClippingMediaPeriod via the DecoderInputBuffer.
There will likely be a cleaner fix as a result of adding support for
dynamic clip end points in the future, at which point this can be
reverted.
issue:#7188
PiperOrigin-RevId: 305081757
This is used to generate the initialization vector for encrypting the
cache contents.
Startblock:
<unknown commit> is submitted
and then
3w have passed
PiperOrigin-RevId: 303932151
This moves the playlist API methods to the Player interface. Implementation is moved from ExoPlayerImpl to BasePlayer where possible.
Further the CastPlayer is changed to implement the Player interface. Proper migration of the Playermanager to not use the ConcatenatingMediaSource anymore follows in a separate, future CL.
PiperOrigin-RevId: 302937779
This is less confusing than having audio processing functionality (e.g., playback
speed adjustment) just "not work" for some pieces of media.
If this change is merged, I will update #6749 to also track making DefaultAudioSink
intelligently enable/disable float output depending on how the audio processors are
configured.
Issue: #7134
PiperOrigin-RevId: 302871568
The restriction that these classes only work with SimpleDecoders
is unnecessary. An FfmpegVideoRenderer will not be able to use a
SimpleDecoder, because the SimpleDecoder assumption that each input
buffer can be decoded immediately into a corresponding output is
not true for all video codecs that Ffmpeg supports (e.g., H264 does
not have this property). Generalizing SimpleDecoderVideoRenderer to
DecoderVideoRenderer will allow FfmpegVideoRenderer to still use
the base class, without having to use a SimpleDecoder.
This is a preliminary change toward being able to merge a version
of https://github.com/google/ExoPlayer/pull/7079.
Issue: #2159
PiperOrigin-RevId: 301412344
This prevents OOM errors for high bitrate streams that attempt to fill
the buffer regardless of the memory usage.
Also change the max buffer sizes to ensure this is a no-op for video
streams < 20Mbps and audio streams < 260kbps.
Issue:#6647
Issue:#7006
PiperOrigin-RevId: 300720299
Without this option it's impossible to merge periods covering
different timestamps (at least not without playback issues).
Issue:issue:#6103
PiperOrigin-RevId: 299817540
It's quite anoying to have to search in the list
the last item played everytime the demo is restarted.
Fix that by saving and restoring it.
PiperOrigin-RevId: 299109261
The auto-formatter wants it to look like this, and will reformat
the whole list when an item is added, so let's put that diff in a
standalone change.
PiperOrigin-RevId: 298305479
DefaultLoadControl applies the same min buffer duration to audio
and video. By default, min buffer is set equal to max buffer (50 seconds).
PiperOrigin-RevId: 297324489
- Deprecate old Format.createXXX methods
- Deprecate most Format.copyXXX methods
- Stop using deprecated Format.copyXXX methods in the library
Note: Replacing library usages of Format.createXXX method
will be done in follow up CLs. These changes aren't purely
mechanical because we need to decide which out of peakBitrate
and averageBitrate to set in each case where currently a
single bitrate is provided.
Issue: #2863
PiperOrigin-RevId: 296450935
CryptoInfo.iv length is always 16. When the actual initialization vector
is shorter, zero out the trailing bytes.
Issue: #6982
PiperOrigin-RevId: 295575845
Currently only one access unit can be written per
buffer write. This has been found to be power
inefficient in an offload situation.
#exo-offload
PiperOrigin-RevId: 294886188
Add fields in DecoderCounters for computing the average video frame
processing offset.
The MediaCodecVideoRenderer reports the video frame processing offset
and the demo app presents it on the debug information.
PiperOrigin-RevId: 294677878
This simplifies sending messages to the end of a stream. This was
already possible, but users needed to wait until the duration is known
before sending the message. This duration resolution can happen as part of the message position resolution.
PiperOrigin-RevId: 294626984
This change deprecates Player.onPlayerStateChanged(boolean pwr, int state). It removes deprecation for trivial cases. I'll remove other deprecated usages (mostly in ui module) in follow-up CLs to not bloat this CL.
PiperOrigin-RevId: 292917872
Passing EXT-X-KEY DrmInitData through the FragmentedMp4Extractor
doesn't work for streams with key rotation, because an extractor
instance is used for multiple segments, but is only passed the
EXT-X-KEY DrmInitData corresponding to the first segment.
This change removes passing DrmInitData through the extractor,
and instead passes it via FormatAdjustingSampleQueue. This is
in-line with how manifest DrmInitData is handled during DASH
playbacks.
Issue: #6903
PiperOrigin-RevId: 292323429
- DownloadManagerHelper now passes all downloads to the
DownloadService when the service is attached (and once
the downloads are known). The service then starts the
foreground notification updater if necessary. This fixes
the ref'd issue.
- Don't call getScheduler() if the service is background
only. This was already documented to be the case on the
DownloadService constructor.
- If the service is started in the foreground on SDK level
26 and higher, satisfy the condition to move the service
to the foreground in onStartCommand rather than in stop().
It's much more obviously correct, and should produce the
same end result.
Issue: #6798
PiperOrigin-RevId: 290050024
This optimization allows a ChunkSampleStream to output track
formats as soon as they're parsed during an InitializationChunk
load, rather than waiting until after the InitializationChunk
load is completed.
In DASH VOD, a single InitializationChunk typically loads the
moov and sidx atoms in that order. Hence for long form content
where the sidx is a non-trivial size, this may result in the
track formats being output a non-negligible period of time
sooner than was previously the case. This allows downstream
renderers to start codec initialization sooner, potentially
decreasing startup latency.
For a single test stream on a fast & stable network, this
pretty consistently reduced elapsed time until both audio and
video codecs have been initialized from ~0.5s to ~0.3 seconds
on a Galaxy S8. For 5 test runs without and with these patches,
the eventTime logged by EventLogger for the second decoder
init were:
Without (secs): 0.47 0.47 0.45 0.48 0.46
With (secs) : 0.32 0.33 0.34 0.31 0.40
PiperOrigin-RevId: 289845089
The current order of operations means that the Format is only passed
to the chunk's output after the DataSource has been opened. This
means that establishing the network connection and the downstream
renderers initializing their codecs are effectively serialized to
occur one after the other.
In the new order, the Format is passed to the chunk's output before
the DataSource has been opened. This allows the downstream renderers
to initialize their codecs in parallel with the network connection
being established, and hence latency at the start of playback is
reduced.
PiperOrigin-RevId: 289841854
There's currently no rendering support for ruby text in SubtitleView
or SubtitlePainter, but this does have a visible impact with the
current implementation by stripping the ruby text from Cue.text
meaning it doesn't show up at all under the 'naive' rendering.
This is an improvement over the current behaviour of including
the ruby text in-line with the base text (no rubies is better than
wrongly rendered rubies).
PiperOrigin-RevId: 288280416
This typo was introduced in ddb70d96ad
when migrating a static method with parameter `durationUs` to an
instance method where the correct field to use was `blockDurationUs`
(but `durationUs` also exists).
The test that catches this was only added in 45013ece1e (and
therefore configured with the wrong expected output data).
issue:#6833
PiperOrigin-RevId: 288274197
The Download constructor considers it invalid to have a failure
reason if the download isn't in the failed state. Unfortunately,
calling DefaultDownloadIndex.removeAllDownloads when there's a
failed download will change the state without clearing the reason.
If the downloads are then read back from the DefaultDownloadIndex
we end up violating the Download constructor assertion.
This change clears the failed reason for any existing rows in the
invalid state, and also fixes the root cause that allows invalid
rows to enter the table in the first place.
Issue: #6785
PiperOrigin-RevId: 286576242
Without this @Nullable, potential subclasses can't override the
method to return null if they don't want to use the renderer as a
media clock.
Issue:#6792
PiperOrigin-RevId: 286545736
Also change IcyInfo.rawMetatadata from String to byte[]
ICY doesn't specify the character encoding, and there are streams
not using UTF-8 (issue:#6753). It seems the default of at least one
server is ISO-8859-1 so let's support that as a fallback:
https://github.com/savonet/liquidsoap/issues/411#issuecomment-288759200
Also update IcyDecoder to skip strings it doesn't recognise at all
instead of decoding invalid characters.
The feed from issue:#6753 now decodes accents correctly:
EventLogger: ICY: title="D Pai - Le temps de la rentrée", url="null"
PiperOrigin-RevId: 285388522
This has been broken since
c3d6be3afd
and broken for ICY (where I noticed the problem) since
5695bae9d8.
ICY symptom is that we see no repeated metadata, because the
Icy-MetaData:1 header doesn't make it to the server so we never get back
icy-metaint.
PiperOrigin-RevId: 285379234
This returns the current offset to the live edge. The calculation is
non-intuitive enough to provide this convenience method.
PiperOrigin-RevId: 285171090
Keyframe was rendered rather than skipped when performing
an exact seek to a non-zero position close to the start of
the stream.
PiperOrigin-RevId: 284798460
Caveats:
- Block additional data is ignored if the block is laced
and contains multiple samples. Note that this is not
a loss of functionality (SimpleBlock cannot have block
additional data, and lacing was previously completely
unsupported for Block)
- Subrip and ASS samples are dropped if they're in laced
blocks with multiple samples (I don't think this is
valid anyway)
Issue: #3026
PiperOrigin-RevId: 284545197
The capture frame rate is currently available both via Format.metadata
and decoded in Format.frameRate. As the container Format.frameRate may
be useful to apps, only store the capture frame rate in metadata (apps
will need to decode it but can now access the container frame rate too).
PiperOrigin-RevId: 284165711
This is a minor change ahead of merging a full variant of
https://github.com/google/ExoPlayer/pull/6706, to make
re-buffers less likely.
Also remove variable substitution when parsing
AVERAGE-BANDWIDTH (it's not required for integer attributes)
PiperOrigin-RevId: 283554106
Fixes issue:#6700
sample_cbs_truncated.adts test file produced using
`$ split -b 31795 sample_truncated.adts` to remove the last 10 bytes
PiperOrigin-RevId: 283530136
*** Original commit ***
Improve `Format` propagation within the `MediaCodecRenderer`.
For example, fix handling of pixel aspect ratio changes in
playlists where video resolution does not change.
Issue:#6646
***
PiperOrigin-RevId: 282903626
When transitioning to a new stream in a different format, the audio
processors are reconfigured. After this, they are drained and then
flushed so that they are ready to handle data in updated formats for the
new stream.
Before this change, some audio processors made the assumption that after
reconfiguration no more input would be queued in their old input format,
but this assumption is not correct: during draining more input may be
queued. Fix this behavior so that the new configuration is not referred
to while draining and only becomes active once flushed.
Issue: #6601
PiperOrigin-RevId: 282515359
Note:
- Fixing this uncovers another bug in how audio processor draining
works, so the test playlist still doesn't play correctly after this
change.
- Once we reconfigure the audio sink based on the ExoPlayer Format
rather than the codec MediaFormat in a later change, this change can
be reverted.
Issue: #6601
PiperOrigin-RevId: 281264149
The implementation of writing HDR10+ static metadata assumed that the
application would use default (big endian) byte order for this metadata but
MediaCodec expects the order to match the specification CTA-861.3.
PiperOrigin-RevId: 281050806
Previously the renderer EOS (aka last frame rendered), was reported as soon
as the last encoded frame was queued in the codec renderer.
This leaded to EOS reported too early.
PiperOrigin-RevId: 280456277
This speeds up downloads where segments have the same URL with different
byte ranges. We limit the merged segments to 20 seconds to ensure the download
progress of demuxed streams is roughly in line with the playable media duration.
Issue:#5978
PiperOrigin-RevId: 280410761
- Fix FLAC extension build (currently broken due to use of std::array,
but fixed by migrating to NDK r20).
- Move opus and ffmpeg extensions to NDK r20. For ffmpeg, upgrade to
release 4.2 which requires using libswresample and updates to the
build script.
Issue: #6601
PiperOrigin-RevId: 277924119
The framework opus decoder discards some samples after a call to
flush(). Because we flush a decoder that is being retained across an
input format change, this means that the start of audio gets truncated
when transitioning to a new opus stream. See also
https://android.googlesource.com/platform/frameworks/av/+/refs/heads/android10-release/media/libstagefright/codecs/opus/dec/SoftOpus.cpp.
Avoid this by recreating opus decoders instead of flushing them. It
seems fine to do this for all opus decoders as reinitialization should
be cheap, OEM-provided implementations may also discard samples and
playback shouldn't be interrupted on reinitialization due to the
downstream AudioTrack buffer.
PiperOrigin-RevId: 277458759
- Leaving GvrAudioProcessor for now.
- Removing GvrPlayerActivity because it was never released. Also removing
related UI classes. These were released, but it's unlikely anyone would
have been using them directly.
PiperOrigin-RevId: 275822516
It's confusing that app:played_color also modifies the colors
that derive from it, but the corresponding setter does not. It
seems generally clearer just to define constants.
PiperOrigin-RevId: 273249557
This method allows the player to figure out whether we still have an ongoing
load even if LoadControl.shouldContinueLoading returns false.
PiperOrigin-RevId: 272445577
This doesn't change the current behaviour, just adds a clear error message
to the developer with instructions on how to avoid it.
Issue:#6470
PiperOrigin-RevId: 272405556
Created the WakeLockManager for use in SimpleExoPlayer.
Added a setter in SimpleExoPlayer to adjust this functionality.
Issue:#5846
PiperOrigin-RevId: 272176998
This flag is currently merged into Window.isDynamic, which isn't always true
because
1. A window can be dynamic for other reasons (e.g. when the duration is still
missing).
2. A live stream can be become non-dynamic when it ends.
Issue:#2668
Issue:#5973
PiperOrigin-RevId: 271999378
Adding this callback makes sense for completeness (we have similar callbacks
for all other playback state properties), and also to detect audio focus loss
while buffering which would currently trigger no callback because isPlaying
is still false.
Issue:#6203
PiperOrigin-RevId: 271347351
Inline invocations of these methods, which still leaks the MediaDrms.
However, it will be fixed once the DefaultDrmSessionManager API is finalized
and ExoMediaDrm.Providers are introduced.
Issue:#4721
PiperOrigin-RevId: 270681467
Remove the flag DataSpec.FLAG_ALLOW_ICY_METADATA. Instead, set the
header IcyHeaders.REQUEST_HEADER_ENABLE_METADATA_NAME in the DataSpec
httpRequestHeaders.
BUG:134034248
PiperOrigin-RevId: 270662676
This option allows to set the preferred text language and role flags based
on the user's accessiblity captioning settings.
Issue:#5749
PiperOrigin-RevId: 270233205
The player may suppress playback when waiting for audio focus even if the
state==Player.READY. There is currently no getter or callback to obtain this
piece of information for UI updates or analytics.
Also, it's a important derived state to know whether the playback position is
advancing. Add isPlaying and the corresponding callback to allow retrieving
this information more easily.
Issue:#6203
PiperOrigin-RevId: 268921721
This allows to uniquely identify a window within a Timeline. The value is set
correctly for all Window instances, but is not used anywhere yet.
PiperOrigin-RevId: 267556516
Include Dataspec.httpRequestHeaders in CronetDataSource,
and OkHttpDataSource. Updated documentation of
HttpDataSource.open() to suggest that it should set request
headers (in decreasing priority) from (1) the passed DataSpec,
(2) parameters set with setRequestProperty() and (3) default
parameters set in the HttpDataSource.Factory. No mechanism
has been put in place to enforce this.
PiperOrigin-RevId: 266895574
Sniffing is performed in ProgressiveMediaPeriod even if a single
extractor is provided. Skip it in that case to improve performances.
Issue:#6325
PiperOrigin-RevId: 266766373
- Surface information provided by methods isHardwareAccelerated,
isSoftwareOnly and isVendor added in Android Q in MediaCodecInfo
class.
- Estimate this information based on the codec name for earlier API
levels.
Issue:#5839
PiperOrigin-RevId: 266334850
The last selection criteria is the audio bitrate to prefer higher-quality
streams. We shouldn't apply this criterium though if the languages of the
tracks are different.
Issue:#6335
PiperOrigin-RevId: 265064756
This situation happens if the first chunk to load is already behind the end
of the stream. In this case, the preparation never completes because
HlsSampleStreamWrapper gets stuck in a prepared=false and loadingFinished=true
state.
Gracefully handle this situation by attempting to load the last chunk if still
unprepared to ensure that track information is obtained as far as possible.
Otherwise, it wouldn't be possible to play anything even when seeking back.
Issue:#6314
PiperOrigin-RevId: 264599465
Extract supplemental data from block additions in WebM/Matroska.
Allow storing supplemental data alongside samples in the SampleQueue and write
it as a separate field in DecoderInputBuffers.
Handle supplemental data in the VP9 extension by propagating it to the output
buffer.
Handle supplemental data for HDR10+ in MediaCodecVideoRenderer by passing it to
MediaCodec.setParameters, if supported by the component.
PiperOrigin-RevId: 264582805
There is no point in having this parameter as the tag should always be a single
immutable object instantiated at the time the Timeline is created or earlier.
So there is no preformance benefit and it's error-prone in case people
forget to set setTag=true.
PiperOrigin-RevId: 264117041
This solves various issues around event association for buffering and
error throwing around period discontinuities.
The main changes are:
- Logic around being "ready" at the end of a period no longer checks if the
next period is prepared.
- Advancing the playing period no longer checks if the next one is prepared.
- Prepare errors are always thrown for the playing period.
This changes the semantics and assumptions about the "playing" period:
1. The playing period can no longer assumed to be prepared.
2. We no longer have a case where the queue is non-empty and the playing or
reading periods are unassigned (=null).
Most other code changes ensure that these changed assumptions are handled.
Issue:#5407
PiperOrigin-RevId: 263776304
The current ExoPlayerFactory is growing too big and usage becomes increasingly
complicated because it's not possible to set individual components without
specifying many other defaults.
Adding new builder classes makes building easier and more future-proof.
PiperOrigin-RevId: 263339078
The current max video buffer is 13MB which is too small for high quality
streams and doesn't allow the DefaultLoadControl to buffer up to its default
max buffer time of 50 seconds.
Also move util method and constants only used by DefaultLoadControl into this
class.
PiperOrigin-RevId: 263328088
We already allow mixed mime type and mixed sample rate adaptation on request,
so for completeness, we can also allow mixed channel count adaptation.
Issue:#6257
PiperOrigin-RevId: 261930046
If we keep streams in chunk sources after selecting new tracks, we also keep
a reference to a stale disabled TrackSelection object. Fix this by updating
the TrackSelection object when keeping the stream. The static part of the
selection (i.e. the subset of selected tracks) stays the same in all cases.
Issue:#6256
PiperOrigin-RevId: 261696082
A previous change switched to calculation of the bitrate based on the
first MPEG audio header in the stream. This had the effect of fixing
seeking to be consistent with playing from the start for streams where
every frame has the same padding value, but broke streams where the
encoder (correctly) modifies the padding value to match the declared
bitrate in the header.
Issue: #6238
PiperOrigin-RevId: 261163904
This factory was only needed in the past when we didn't have
AnalyticsCollector.setPlayer. Code becomes easier to use without this factory.
PiperOrigin-RevId: 261081860
This changes the logic in the following ways:
- If no preferred language is matched, prefer better scores for the selected
audio language.
- If a preferred language is matched, always prefer the better match
irrespective of default or forced flags.
- If a preferred language score and the isForced flag is the same, prefer
tracks with a better selected audio language match.
PiperOrigin-RevId: 259707430
1. Using the Locale on API<21 doesn't make any sense because it's a no-op
anyway. Slightly restructured the code to avoid that.
2. API<21 often reports languages with non-standard underscores instead of
dashes. Normalize that too.
3. Some invalid language tags on API>21 get normalized to "und". Use original
tag in such a case.
Issue:#6153
PiperOrigin-RevId: 258773463
2-letter codes (ISO 639-1) are the standard Android normalization and thus we
should prefer them to 3-letter codes (although both are technically allowed
according the BCP47).
This helps in two ways:
1. It simplifies app interaction with our normalized language codes as the
Locale class makes it easy to convert a 2-letter to a 3-letter code but
not the other way round.
2. It better normalizes codes on API<21 where we previously had issues with
language+country codes (see tests).
3. It allows us to normalize both ISO 639-2/T and ISO 639-2/B codes to the same
language.
PiperOrigin-RevId: 258729728
If we use the default start position, we currently resolve it immediately
even if we need to play an ad first, and later try to project forward again
if we believe that the default start position should be used.
This causes problems if a specific start position is set and the later
projection after the preroll ad shouldn't take place.
The problem is solved by keeping the content position as TIME_UNSET (= default
position) if an ad needs to be played first. The content after the ad can
then be resolved to its current default position if needed.
PiperOrigin-RevId: 258583948
These methods helps to indicate that a media source isn't used to create new
periods in the immediate term and thus limited resources can be released.
PiperOrigin-RevId: 258373069
- Remove manifest argument from callbacks of Player.EventListener and
SourceInfoRefreshListener. Instead make it accessible through
Player.getCurrentManifest() and Timeline.Window.manifest.
- Fix all MediaSource implementation to include the manifest in the
Timeline instead of passing it to the SourceInfoRefreshListener.
- Refactor ExoPlayerTestRunner, FakeTimeline, FakeMediaSource to
reflect these changes and make tests pass.
PiperOrigin-RevId: 257359662
We currently handle most the control code logic after handling special
characters. This includes filtering out repeated control codes and checking
for the correct channel. As the special character sets are control codes as well,
these checks should happen before parsing the characters.
Issue:#6133
PiperOrigin-RevId: 256993672
Currently, we sometimes apply new playback parameters directly and sometimes
through the list of playbackParameterCheckpoints. Only when using the checkpoints,
we also reset the offset and corresponding position for speedup position
calculation. However, these offsets need to be changed in all cases to prevent
calculation errors during speedup calculation[1].
This change channels all playback parameters changes through the checkpoints to
ensure the offsets get updated accordingly. This fixes an issue introduced in
31911ca54a.
[1] - The speed up is calculated using the ratio of input and output bytes in
SonicAudioProcessor.scaleDurationForSpeedUp. Whenever we set new playback
parameters to the audio processor these two counts are reset. If we don't reset
the offsets too, the scaled timestamp can be a large value compared to the input
and output bytes causing massive inaccuracies (like the +20 seconds in the
linked issue).
Issue:#6117
PiperOrigin-RevId: 256533780
1. Only output video starting from a keyframe
2. When calculating the timestamp offset to adjust live streams to start
at t=0, use the timestamp of the first tag from which a sample is actually
output, rather than just the first audio/video tag. The test streams in
the referenced GitHub issue start with a video tag whose packet type is
AVC_PACKET_TYPE_SEQUENCE_HEADER (i.e. does not contain a sample) and whose
timestamp is set to 0 (i.e. isn't set). The timestamp is set correctly on
tags that from which a sample is actually output.
Issue: #6111
PiperOrigin-RevId: 256147747
We are currently queuing periods in a way such that the new start position
lines up with the end of the previous period (to ensure continuous playback).
However, if the start position of the new period is larger than the total of
all previously played period durations, we may end up with negative renderer
timestamps when seeking back to the beginning of this new period. Negative
timestamps should be avoided as most decoders have problems handling them
correctly.
This change forces a renderer reset if we detect such a seek to a negative
renderer time and also resets the renderer offset to 0 every time all
renderers are disabled, as this is the only time where we can savely change
the offset of an existing media period.
Also, if playback starts with an ad, we choose the content position as
renderer offset to prevent the whole issue from occurring for the seek-behind-
midroll case.
Issue:#6009
Issue:#5323
PiperOrigin-RevId: 253790054
This permission has normal access right and can't be revoked by the user.
However, an app can choose to revoke it when using ExoPlayer, e.g. if
no network is required and the app doesn't want to list this permission.
Support this use case by gracefully catching the exception in the relevant
places.
Issue:#6019
PiperOrigin-RevId: 253759332
We currently report MediaCodec exceptions as unexpected exceptions instead of
as renderer error. All such exceptions are now wrapped in a new DecoderException
to allow adding more details to the exception.
PiperOrigin-RevId: 252054486
We currently don't display the last frame because the seek time is behind the
last frame's timestamps and it's thus marked as decodeOnly.
This case can be detected by checking whether all data sent to the codec is
marked as decodeOnly at the time we read the end of stream signal. If so, we
can re-enable the last frame. This should work for almost all cases because the
end-of-stream signal is read in the same feedInputBuffer loop as the last
frame and we therefore haven't released the last frame buffer yet.
Issue:#2568
PiperOrigin-RevId: 251425870
Using parallel adaptation for Formats without bitrate information currently
causes an exception. Handle this gracefully and also cases where all formats
have the same bitrate.
Issue:#5971
PiperOrigin-RevId: 250682127
cache() opens all connections with unset length to avoid position errors.
This makes more data then needed to be downloading by the underlying
network stack.
This fix makes makes it open connections for only required length.
Issue:#5927
PiperOrigin-RevId: 250546175
This prevents further unexpected updates if the MediaSource happens to
finish its preparation at a later point.
Issue:#5915
PiperOrigin-RevId: 249439246
Adding an explicit option to clear all downloads prevents repeated database
access in a loop when trying to delete all downloads.
However, we still create an arbitrary number of parallel Task threads for this
and seperate callbacks for each download.
PiperOrigin-RevId: 247234181
Can happen if the load position falls behind in every playlist and
when we try to load the next segment, the adaptive selection logic
decides to change variant.
Issue:#5816
PiperOrigin-RevId: 245923006
We currently toggle the view in onTouchEvent ACTION_DOWN which is non-standard
and causes problems when used in a ViewGroup intercepting touch events.
Switch to standard Android click handling instead which is also what most
other player apps are doing.
Issue:#5784
PiperOrigin-RevId: 245219728
Experiments show this is beneficial for rebuffers with only minor impact
on battery usage.
Configurations which explicitly set a minimum buffer duration are unaffected.
Issue:#2083
PiperOrigin-RevId: 244823642
Before this change we'd release the audio track and create a new one as soon
as audio processors had drained when reconfiguring.
Fix this behavior by stop()ing the AudioTrack to play out all written data.
Issue: #2446
PiperOrigin-RevId: 244812402
Remove MediaCodecSelector.DEFAULT_WITH_FALLBACK, as codec selectors
will need to be able to return a list of decoder infos even when not
using fallback in a later change. Instead signal that fallback should
be used via a renderer constructor.
Fallback is always disabled for audio.
PiperOrigin-RevId: 242454172
The priority task manager only needs to listen to loading state changes and
is independent of the rest of DefaultLoadControl. This also fixes problems
where the player stops loading without consultin the LoadControl.
PiperOrigin-RevId: 242098374
If no track matches the preferred language or no preferred language is provided,
use the system Locale language as the next decision criterion.
PiperOrigin-RevId: 241322703
It's currently very difficult to actually set a reason for track selection
triggered by a SelectionOverride. It would require creating a new custom
TrackSelection.Factory where the reason gets injected somehow before the
override is specified on the player.
Simplify this whole procedure by allowing to set the reason directly and
forward this reason to all fixed selections created based on this override.
PiperOrigin-RevId: 240114942
This allows to distinguish between regional variants and scripts.
We still need to normalize the language code itself to make track selection
independent of the whether 2 or 3 letter codes are used.
PiperOrigin-RevId: 239783115
Any seek map with non-zero offsets breaks playback with ICY metadata as
the metadata is no longer read from the correct position.
Issue:#5658
PiperOrigin-RevId: 239605839
The flag in ExoPlayer.prepare is documented as keeping the current window
index and window position. We are currently using the current period UID and
period position instead. This causes problems when the media source is changed
but the position is not reset.
Using the initial seek position instead ensures we actually use the window
index and position.
Issue:#5520
PiperOrigin-RevId: 236101024
Adding new error types may cause issues when listeners assume a fixed set of
error types and don't handle arbitrary defaults.
Fixing error handling in one case and improving documentation to make people
aware of the issue.
PiperOrigin-RevId: 236093265
*** Reason for rollback ***
Reverting as this may break playback on other Amlogic devices and/or playback of non-interlaced content.
*** Original change description ***
Add max video size workaround for Amlogic decoder.
The Amlogic awesome decoder reduces the video size of interlaced videos by half
if the internal configuration isn't force reset with new maximum input size
values. The product of these new values must exceed 1920x1088 to force the
reset.
Issue:#5003
***
PiperOrigin-RevId: 234967314
HlsSampleStream#read should return end of stream when
there is no mapping for the sample stream, instead of
nothing read. This allows the player to transition to
ended.
Issue:#5524
PiperOrigin-RevId: 234764027
This bug affects any playlist that uses initialization segments. In practice,
almost exclusively fragmented mp4 segmented playlists are affected.
The bottom line is that extractors are chosen for reuse after the
initialization segment connection is open. However, reused extractors
do not need re-parsing the init segment, so loading the initialization is
wasteful.
PiperOrigin-RevId: 234479467
Previously we would get a new AudioTrack and flush all audio processors if any
AudioProcessor needed to be flushed on reconfiguration. This was problematic for
the case of TrimmingAudioProcessor because it could become active or inactive
due to transitioning to a period with gapless metadata or without it (we don't
keep it active all the time because it is wasteful to populate its end buffer
for content that is not gapless).
This change handles the case where we don't need an AudioTrack but
AudioProcessors do need to be flushed. In this case we drain all the audio
processors when next handling data then switch to the new configuration.
This avoids truncation when period transitions change whether
TrimmingAudioProcessor is active but don't require a new AudioTrack, and is also
a step towards draining the AudioTrack when transitioning between periods if we
do need a new AudioTrack.
To do this, it needs to be possible to drain any pending output data from an
AudioProcessor after it's configured to a new format, so this change makes sure
AudioProcessors allow calling playToEndOfStream and getOutput after
reconfiguration and before flush.
PiperOrigin-RevId: 234033552
Stop encoding/decoding presentation time as part of the message.
What's actually in emsg boxes is a presentation time delta,
which is why it's only 32 bits, and hence why it doesn't handle
large absolute timestamps. We were using this field to hold
absolute timestamps only for the purpose of passing presentation
times from DashManifestParser.parseEvent back to the calling
method. After this change, we return Pair<Long, EventMessage>
instead.
Issue: #5490
PiperOrigin-RevId: 233561731
Switch from passing an ad UI ViewGroup to passing an object that can also
provide information about controls overlays.
Also switch to using a dedicated overlay for ads instead of the overlay frame
layout, which apps have easy access to.
PiperOrigin-RevId: 233393500
Supporting multiple overrides allows to select tracks from multiple groups, if
enabled. As more options are added, the creation of the dialog is moved to a
separate builder class.
PiperOrigin-RevId: 233366282
Imported from GitHub PR https://github.com/google/ExoPlayer/pull/5438
Plus the following changes:
- Only support profile 5 (handling other profiles requires
backward-compatibility changes in the renderer which are left for a later
change.)
- Only add KEY_PROFILE to the codec configuration MediaFormat for Dolby Vision.
- In MediaCodecUtil support all DV profiles that Android has constants for. This
includes ones that are "not supported for new applications". Since we don't
extract these profiles, this is currently only for the benefit of custom
extractors.
- Misc code style fixes and reordering for consistency.
Merge 37878b975c2bc082b0568e21cbe62bfcef97c10d into 67be9e7783
PiperOrigin-RevId: 233066799
Given the change to require setPlayer on AdsLoaders, it seems like a good
opportunity to clean up deprecated ads-related symbols.
PiperOrigin-RevId: 233020171
When calling releaseSource(), all pending messages will be removed. That means
that all action-on-completion callbacks which are somewhere in flight are
just dropped without being called. This change adds code to keep track of the
current state of each callback to allow all of them being called when the
source is released.
Issue:#5464
PiperOrigin-RevId: 232312528
It better describes what the class does. More importantly, we've had
inconsistent class names since we added offline support, for which we
added ProgressiveDownloader ("ExtractorDownloader" doesn't make any
sense). We could really do with aligning the names for clarity.
(Sorry)
PiperOrigin-RevId: 231387268
The combination of pre-16 API levels accounting for ~0.5% of the device
population, and that the most important components in ExoPlayer (e.g.
the MediaCodec renderers) have always required API level 16, mean it's
very unlikely this will negatively impact on anyone.
PiperOrigin-RevId: 230701808
ExoPlaybackExceptions of type SOURCE are always associated with the loading
period and thus we can use the event time for the loading period in
onPlayerError. Renderer and unexpected exceptions are still associated with the
currently playing period.
Issue:#5407
PiperOrigin-RevId: 230216253
The Amlogic awesome decoder reduces the video size of interlaced videos by half
if the internal configuration isn't force reset with new maximum input size
values. The product of these new values must exceed 1920x1088 to force the
reset.
Issue:#5003
PiperOrigin-RevId: 230206675
That's the same position set in MediaPeriod.prepare (where it may be removed
in the future).
Having the position at an earlier point is necessary to fix an
issue with lazy preparation in ConcatenatingMediaSource where the prepare
position was assumed to be known but MediaPeriod.prepare hasn't been called
yet.
Issue:#5350
PiperOrigin-RevId: 229756637
The buffered position is currently based on the mimimum queued timestamp of
all AV tracks. If the tracks have unequal lengths, one track continues loading
without bounds as the "buffered position" will always stay at the shorter
track's duration.
This change adds an optional buffer flag to mark the last sample of the
stream. This is set in the Mp4Extractor only so far. ExtractorMediaSource
uses this flag to ignore AV streams in the buffered duration calculation if
they already finished loading.
Issue:#3670
PiperOrigin-RevId: 229359899
DataSpec.FLAG_ALLOW_CACHE_FRAGMENTATION is added to indicate to the
cache when fragmentation is allowed. This flag is set for progressive
requests only.
To avoid breaking changes, CacheDataSink defaults to ignoring the flag
(and enabling fragmentation) for now. Respecting the flag can be
enabled manually. DownloaderConstructorHelper enables respecting of
the flag.
Issue: #4253
PiperOrigin-RevId: 229176835
We currently forget whether a source is seekable at re-preparation. This was
implemented intentionally this way under the assumption that we really can't seek
until we have loaded the seek map again. However, seek operations are only
allowed after a media period is prepared. So there is no harm in remembering
whether a source is seekable.
This problem currently prevents reusing ClippingMediaSources with
ExtractorMediaSource and a non-zero start clip position.
Issue: #5351
PiperOrigin-RevId: 229169441
They are not longer needed anywhere, are error-prone (because of threading
requirements), and complicate testing and using MediaSources without a player.
PiperOrigin-RevId: 227871157
We currently either use the app thread returned by the player or the thread
the commands are called on depending on whether the media source is already
prepared or not.
This change lets the application decide which callback thread to use. As a
side effect, we also don't longer need access the player instance passed to
MediaSource.prepare.
PiperOrigin-RevId: 227871111
Also configure the FFmpeg context to ignore errors as far as possible (this
appears to have an effect only for certain decoders).
Issue: #5293
PiperOrigin-RevId: 227851397
Passing the player through MediaSource.prepare is only needed for the AdsLoader
and complicates other usages of MediaSource. Providing the player directly to
the AdsLoader is also in line with the usage pattern of PlayerView and other
components.
Also rename methods to start/stop to better reflect their usage.
PiperOrigin-RevId: 227682112
Made DownloadState top level class.
Replaced action field DownloadAction fields.
Added removing, removed and restarting states.
Renamed started state to downloading.
PiperOrigin-RevId: 227664735
ExoPlayer methods must not be called from any thread besides the specified
app thread. Therefore we shouldn't use them here. Using a regular Handler
instead is fully equivalent.
Issue:#5240
PiperOrigin-RevId: 227650489
We currently have two factory methods where it is completely unclear which one needs
to be overridden.
This change deprecates the old one, adds a Util method to easily map back from the new
to the old behaviour, and updates all implementations of the now deprecated method in
our code.
PiperOrigin-RevId: 224303560
We currently default to not caching data if the content length
cannot be resolved once the DataSource has been open. The
reason for this is to avoid caching progressive live streams.
By doing this we were accidentally not caching in other places
where caching is possible, such as DASH/SS/HLS segments during
playback if the server doesn't include a Content-Length header.
Also HLS encryption key chunks, which were very unlikely to be
cached during playback because we explicitly set FLAG_ALLOW_GZIP
(which normally stops content length from resolving) without
setting FLAG_ALLOW_CACHING_UNKNOWN_LENGTH.
It seems like a good idea to flip the default at this point,
and explicitly disable caching in the one case where we want
that to happen.
PiperOrigin-RevId: 223994110
